ALEAUDIT with wrong SNDPRN/RECPRN
Hello,
I have setup an IDoc scenario R/3-XI-R/3 which works correctly for sending IDocs and receiving answer IDoc.
The sendinf R/3 system creates the IDoc with
controlrecord:
ReceiverInformation: LI#LF#VEND1
SenderInfo: KU#AG#CUST1
In XI this information is converted correctly on the IDOCRECEIVER to SYSTEM2.
Also the conversion back on the answer messages works correctly and the IDocs are received with the correct values.
Answer IDo (correct converted in IDOCRECEIVER to SYSTEM1):
SenderInfo: LI#LF#VEND1
ReceiverInfo: KU#AG#CUST1
The problem now comes with the ALEAUDIT IDoc.
SYSTEM2 send an ALEAUDIT back, but this header record is not converted, it is received with:
SenderInfo: LS#SYSTEM2
ReceiverInfo: LS#SYSTEM1
I can setup an additional receiver in WE20, but I want to use the existing partner profile for VEND1.
How can I convert the control record of the ALEAUDIT IDoc like other IDocs from SYSTEM2.
Or is this a missing functionality in XI?
best regards
Werner Magerl
Hi Rumi Singh,
The design should be The communication component ( Your file system) should be assigned with a logical system name in the adapter specific parameters. This is because, the logical sender for the data is not XI, but the file system.
Then you have to create the partner profile from this system in your SAP system. This should not be environment specific.
Steps: Create a logical system using SALE transaction
Create a logical system entry in partner profile WE20.
Best Regards,
Ravikanth Talagana
Similar Messages
-
Webi base on BW query based on Infoset comes back with wrong values
Hello:
I have a Webi report on an OLAP Universe, on Bex Query.
The bex query is based on 1 INFOSET.
When I run the webi report the values that comes back a totally wrong values.
The correct results are not brought back.
When I do a test with crystal reports to the infoset, I can see the correct values. (I'm aware crystal uses different drivers).
The test is BW query designer, and crystal brings back proper values from Infoset based BW query.
Webi on Infoset based BW Query comes back with wrong data.
query is simple.
Pull in 3 attributes, 3 key figures, where componentkey = "111"
I get 36 rows in Crystal and 36 rows in Bex Analyzer, 36 rows in BW query designer (web analyzer).
I get many rows in webi (almost like a CARTENSIAN product).
I search a round this forum but still did not see a conclusive answer to this problem.
But I see another thread that several others faced this same issue without a resolution.
My environment.
BOE XI 3.1 SP2
No fix packs
SAP IK 3.1 SP2
HPUX-IA64
Thanks in advance for any help.
DwayneWas this problem ever solved?
I am having a similar problem with an infoset based query.
I have created the BW infoset, and confirmed that the correct data is returned from the underlying infoproviders. A simple BW query on that infoset yields the same results.
Create the universe, and then the WEBI, and WEBI now shows hundreds of records where I expect 10. Data is being returned in WEBI that definitely shouldn't be there. It's almost like the restrictions applied in the characteristic restriction area of my BW query are being ignored, even if I include them in the WEBI query.
Cheers,
Andrew -
IPhoto imports photos with wrong dates even if the dates are fine on the camera
Hi!
When I import photos with iPhoto, sometimes it imports them with wrong dates, even the dates are fine on the camera. It puts dates such as 2032. Does anyone know how can I fix that. As far as I know there is no way to change dates of the photos.
Thanks!well that is very confusing since if the date is correct on the camera it will be correct in iPhoto
and as to
As far as I know there is no way to change dates of the photos.
Try looking through your iPhto menus - two commands - adjust time and date and batch change time and date - asjust is used to correct incorrect dates like a comera setting - Batch change for missing dates like with scans
LN -
PO created with wrong Company code
Hi Gurus,
I have Plant XXXX assigned to Company code 1111 and
Plant YYYY assigned to Company code 2222
One of the user has created PO with Plant XXXX and company code wrong as 2222.
(we have warning message setup & not error message. So, it allowed user to create PO with wrong Company code and save)
GR & IR both are already posted. I find the accounting document of these GR/IR show correct company code as XXXX-1111 (mostly would have taken correctly based on plant XXXX).
These are service POs (non stock).
Now user wants to change the company code in PO to 1111.
I checked...and system simply allow to change to company code to correct one i.e 1111. It does not give any message.
Could any one give me some additional info.. if it is right to do so? I am not too convinced at this moment.
I was suggesting user to reverse GR, IR, delete PO and create new PO. Is that right?
Thanks n advance for your input.
Best Regards,
MohanDear Mohan,
U can change the company code in PO as it will not have any impact since the GR and IR is completed.
Accounts are hit based on the valution area(valuation grouping code).
Since the PO is already closed u can go ahead the change the same.
Regards,
AM Vahanan -
SRM PO created with wrong company code
Hello,
The users have created several PO in SRM with wrong company code. The user was found in the wrong organization structure during the creation of shopping and approval. The PO did not get transfer to the Back because of this. Is there a way to modify the PO and change the company code.
In case we want to modify it in the tables given that BBP_PD gives you an indication of which table and entry to modify, is there a way to do this operation (like SE16N in ECC)? Have you ever done this and what risk is their in such an operation.
Thank you.Hi,
I doubt anyone here will (or will dare) suggesting to you how to do it as it is against SAP practise totally. if the document is created wrongly, it should be deleted and approved with all the tracking and changes in place for auditing purposes.
Frankly that is what you should practise as well.. my 2cents opinion.
Regards.
YS -
Balance carryforward is not correct due to incorrect GL created with wrong
Hi team,
We have created two gl accounts with wrong account group which is balance sheet and also made an postings to that gl account after year end process done so correcting this issue, now we have transferred that amount to new gl account which is p&l account and also we have executed FAGLGVTR (carry forward trasaction)but the amount is not reflecting in retained earning account so pls let me know solution for this issue.
Thanks
SAPDear Seshu,
You can Transfer the Retained earnings account balance to a new GL account for Retained earnings. And mark the previous account for mark for deletion / not to use and hence no postings will be allowed in the future to that GL account. And now you can carryforward normally in the future years use.
Regards,
Shankar K B. -
Some of my apps are with wrong language.
Some of my apps are with wrong language. Spotify is on holland and sleep cycle are on Chinese? Is there a way to change this ?
My region is set right (Norwegian)Henrik,
You should try setting your general system language to English, followed by setting it to Dutch again. Fixed it for me. Apps that don't have a translation to Dutch (at least that's what i'm guessing) now appear in English (which I think is fine). So before this 'fix' the phone must have somehow thought Chinese was my second language...
https://discussions.apple.com/message/23148896#23148896
Regards,
Johan -
Started new computer up with wrong itunes account how do i change it
Started new imac with wrong itune account. How do i change it?
Lunch iTunes - go to the Home page of the iTunes Store and select 'account' - you will get a dialog and you can log into your account.
MJ -
How many times with wrong password will phone lock out
how many times with wrong password will phone lock out
Depends on whether you have it set to erase data after 10 attempts. Otherwise it will lock out for a certain amount of time and then you can try again before it locks out again. However, if you cannot remember the passcode, you will have to restore the phone on the computer you normally sync with http://support.apple.com/kb/HT1212.
-
Xsl transformation of xml with wrong namespace
I have xml with wrong namespace:
<PAMStartedNotification xmlns="some site">
<tUser>PLVUSER</tUser>
</PAMStartedNotification>I need to leave this namespace and transform it.
As a result of transformation now I get
<tUser></tUser>
...I.e. XPath is not calculated properly.
If I leave out that namespace then everything is ok.
But I want to leave that namespace as it is.
I use the following code to transform xml:
Templates stylesheet = transformerFactory.newTemplates(new StreamSource(new File(fileName)));
Transformer processor = stylesheet.newTransformer();
java.io.StringWriter resultWriter = new java.io.StringWriter();
StreamResult streamResult = new StreamResult(resultWriter);
processor.transform(new StreamSource(new StringReader(xmlData)), streamResult);
transformedXML = resultWriter.getBuffer().toString();Any ideas how to do that(transform xml with wrong namespace)?
Edited by: prng on Dec 15, 2008 6:43 AM
Edited by: prng on Dec 15, 2008 6:45 AMprng wrote:
Sorry.
Here is XPath I use to select tUser:
/PAMStartedNotification/tUser
Right. To start out, that selects a PAMStartedNotification element which is in no namespace. But yours isn't. It's in the default namespace, which doesn't have a prefix. You could try this XPath expression:
/*[local-name() = 'PAMStartedNotification']/*[local-name() = 'tUser'](Untested, might have mis-typings and so on.) -
Connect DB - SYS user with wrong password
Hi All,
A strange thing I have noticed with SYS user since Oracle 9i(never worked on earlier versions) is that I can connect to the SYS user as SYSDBA with wrong password as well! Please guide how to prevent this...
(I have searched for a solution online but was unable to find any :( )
SQL> CONN SYS/AAA@TEST AS SYSDBA
Connected.
SQL> DISC
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> CONN SYS/BBB@TEST AS SYSDBA
Connected.
SQL>
SQL> DISC
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production*009*There is nothing wrong and nothing should be, IMO, prevented.
When you log in to the server as an user in the dba group (Unix) or the ora_dba group (Windows), you are a power user and O/S authentication applies to you, and you don't need a password.
Logging in as owner of the software (oracle) all the time, what many DBAs do, is a bad idea anyway, as you can remove anyufile on O/S level.
Strategies to prevent this:
- make sure your account isn't in the groups I mentioned
or
- disable O/S authentication by editiing sqlnet.ora
Both procedures are documented.
Finally please note anyone who has root access can get around this easily.
Sybrand Bakker
Senior Oracle DBA -
Macbook booting with wrong keyboard layout.
hello all,
i've got a 15 inch macbook pro with the latest os x. every time i reboot, it resets the keyboard layout to american english even though i preset it to swiss german. this means that i always need to go to the language settings and change it to my layout, which is quite annoying.
any suggestions how to solve this?
thanks a lot in advance and kind regards
jurgI posted the same question on stackexchange as well: http://apple.stackexchange.com/questions/111460/macbook-booting-with-wrong-keybo ard-layout
-
Trip form - Warning PageBuilder will run with wrong client window ID"
Dear All,
I am getting following warning message before opening Trop form.
"error starting iView webdynpro PageBuilder will run with wrong client window ID"
If we click on OK button, the pdf form ets opened correctly.
How to remove this warning ?
Thanks,
VinodWe ran into the exact problem when opening a PCR form from the "Status Overview" iView in MSS.
The solution is here: [Note 1171930 - Application will run with a wrong client window ID alert|https://service.sap.com/sap/support/notes/1171930]
This applies if you have one of the following versions and an iView is launched in a new window:
- NW04s SP15
- EhP1
Best regards,
Jill -
Login attempts with wrong /expired password..Security
Hi,
I need to know dictionary view , which tells which user is trying to login with wrong password.
Actually login history for oracle user account.
please tell procedure or configurations for this.
Thanks in advance.
AjThis is a correct method for OLD versions
See correct value for AUDIT_TRAIL in 10g : http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams016.htm#REFRN10006
From a security point of view, the best is to audit into OS (syslog : http://download.oracle.com/docs/cd/B19306_01/network.102/b14266/auditing.htm#sthref1168)
From a day-by-day point of view, the simplier is to audit into DB (SYS.AU$)
Thoses parameters are not dynamic but you've to modify thoses in spfile, as Oracle recommand using spifile instead of pfile.
svrmgrl no longer exist, you have to do this in sqlplus. -
The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!
I want to get a new iPhone to replace this defective phone. I am gonna be crazzzzzzzyyyyyyyy with anger,!!!,!,,,! I takes2 hours to go to Regent street apple stores for three times!!!!!. It is a lot of transport fees !
PLz tell me why! How to deal with it !Unless it's confirmed officially that your phone is defective, then you can ask for a replacement. Or you have to live with you. However you can trade it for a new one if you don't care the price drop.
Maybe you are looking for
-
Add new Content to a html/plain file
Hi Everybody, how can is it possible to add new content (a new line) to a existing html/plain file? I have two methods, with the first one i can create a file but with the second one it is not possible to add new content to the just created file. Wha
-
How to import lokal contacts out of my macbook into iphone?
I have in the contact book of my macbook two categories of contacts.One is named "icloud",the other "local".It seemed,that the iphone connected via USB cable is synchronizing the contacts stored under "icloud" only.How can I transfer my local contac
-
Hi all, I just reset some value field in COPA Costing based, but the it does not affecting the historical data in the COPA report. Does anyone familiar with this situation. Is there any program to run? Any help would be appreciated. Thanks, Lea
-
Hi all, I am writing a java program to calculate Pi from the following infinite serries pi=4*(1-1/3+1/5-1/7+1/9-1/11+1/13+...) I need clarifications as to how to implement this. I need to show the value of Pi approximated by term 1, term 2 etc as wel
-
HT201263 My phone was fine until I updated itunes
Now my phone is stuck in recovery mode after an update. I get unknown error 1403 after itunes tries to restore the phone for more than 10 minutes. Any way to fix? The help article for error 1403 just tells me to connect to itunes. Connecting to itune