ALEMASTER Locked masterdata load

Hi all,
When i'm trying to load data, this is the error msg i get
User ALEMASTER locked the load of master datas for characteristic xxx_xxxx.
But when i go and see the locks in SM12, i find ALEREMOTE locks on the same info object. what should to be done to load this data?
Any pointer would be appreciated and fully rewarded.
Thanks,
Mav

It is locked by R/3.
Ask you BASIS to sen the R/3 to Non-Modifiable mode
As the system would be designed like that
hope this should help
as i am not BW guru..i also experienced same issue

Similar Messages

  • Regarding Locking the loading of data

    hai
    when i loading the data then im getting that there is a error say like below
    <b>User RIZWANTX locked the load of master datas for characteristic ZTTLLOCK</b>
    My User-id is RIZWANTX
    why this is coming and what it means
    pls tell me
    I will assign the points
    rizwan

    Hi Rizwan,
             Did SM12 solved your problem?
    If not..pls let us know the way you are loading data into ZTTLLOCK?
    If you have scheduled more than one infopackage simultaneously in a PC....Then what happens is the infopackage loading data into ZTTLLOCK locks it.....hence when the other infopackage tries to access that characteristic will get that error.
    If this is the case then try to load One infopackage at a time manually.
    Hope it helps.
    Srini

  • COPA Datasource creation and Masterdata loading for characteristics

    HI,
    I am creating a Costing based COPA datasource for client requirement.
    There are fileds from
    Characteristics from the segment level:
    Currency type        PALEDGER
    Fiscal Year          GJAHR
    Period/year          PERIO
    Plan/Act. Indicator  PLIKZ
    Record Type          VRGAR
    Version              VERSI
    *Characteristics from the segment table:
    Company Code         BUKRS
    Billing Type         FKART
    Brand                KMBRND
    Brand                EXTWG
    Business Area        GSBER
    CO Area              KOKRS
    Category             WW010
    Country              LAND1
    Customer             KNDNR
    Customer group       KDGRP
    Distr. Channel       VTWEG
    Division             SPART
    Material Group       MATKL
    Not Used-Level4      WW040
    Plant                WERKS
    Prod.hierarchy       PRODH
    Product              ARTNR
    Product hierarchy    WW050
    Profit Center        PRCTR
    Sales Group          KMVKGR
    Sales Office         KMVKBU
    Sales Ord. Item      KDPOS
    Sales Order          KAUFN
    Sales Org.           VKORG
    Sales district       BZIRK
    Sales employee       KMVTNR
    Sub Group            WW020
    Sub Sub Group        WW030
    Vol. rebate grp      BONUS
    Characteristics from the line items:
    Record Currency      REC_WAERS
    Billing Date         FADAT
    Canceled doc.        STO_BELNR
    Canceled item        STO_POSNR
    Cost Element         KSTAR
    Cost Object          KSTRG
    Document number      BELNR
    Goods Issue          WADAT
    Item number          POSNR
    Order                RKAUFNR
    Partner PC           PPRCTR
    Posting date         BUDAT
    Ref.doc.number       RBELN
    Reference item       RPOSN
    Sender BProc         PRZNR
    Sender cost ctr      SKOST
    WBS Element          PSPNR
    Value fields:
    Administration Costs KWGOHD
    Bonuses              KWBONI
    Customer Discount    KWKDRB
    Direct mat. costs    KWMAEK
    FOB Charges          VV020
    Freight              KWFRGR
    Gross sales          KWBRUM
    Insurance            KWINSR
    Miscellaneous chargs VV030
    Other Charges        VV010
    Other Discounts      RABAT
    Other overhead       KWSGEK
    PAL/Packing charges  VV040
    Revenue              ERLOS
    Sales costs          KWSOHD
    Sales quantity       ABSMG
    Stock Value          VRPRS
    Calculated Key Figures from the Key Figure Scheme:
    Sales unit           COPASLQTU
    Sales quantity       COPASLQTY
    Revenue              COPAREVEN
    Cust. discnt         COPACDSCN
    Base on the above characteristic fields how can i consider the infoobjects from BW to laod masterdata.
    Do i need to consider the base tables for characteristics and for value fileds apart from CE1XXX,CE2XX,CE3XXX,CE4XXX tables.
    Please give me your ideas on this.
    Thanks,
    Satya

    Hi Durgesh,
    Thanks for your response,
    Data is coming perfectly in RSA3 for COPA datasource.
    There is a confusion while reconciling the data with ECC system.(transaction KE24).
    Functional consultant has reconcile one transaction with a reference document number and with  certain currency type(Company code currency/Operating concern currency).
    But still i confuse with the Masterdata Loading.
    Because masterdata attribute fileds are taking directly from the operating concern in COPA which is normally won't happen with the other scenario.
    (Say for CUSTOMER attribute are CUSTOMER GROUP and COUNTRY, In COPA scenario these are directly available in operating concern which will be available for datasource.But for other scenarios for CUSTOMER GROUP and COUNTRY fill with the CUSTOMER attributes hence my idea is whether we need to load masterdata in BI or not.)
    Please give your valuable o/p.
    Thanks,
    Satya

  • Check last masterdata load

    How do we check the last master data load for an object that has direct update?
    I went to the infosource and clicked on the existing infopackages and went to the monitor which prompts ' no data selected'.
    How do I check when the last masterdata load for this object happened/?

    Hi,
    The following tests are available check the master data and transaction data too.
    The system compares the content of each individual table with the content of the corresponding index on a record-by-record basis. This check is only suitable for tables or indexes that do not contain a large amount of data, such as dimension tables, certain SID tables (S) and attribute tables (X and Y). This is not generally the case with fact tables. If a table contains 10,000 records or more, it is not checked.
    In some situations, the content of the indexes of the BIA index may differ from the content of the corresponding database table. This may be the case if requests have been deleted from the InfoCube or if an InfoCube has been compressed.
    As a prerequisite, the statistics have to be switched on for the relevant InfoProvider. You make this setting in statistics properties maintenance screen (on the Data Warehousing Workbenchscreen, choose Tools ®  Settings for BI Statistics).
    Regards,
    Vamsi Krishna Chandolu

  • Lock and Load X - Magenta Flash with 10.0.6

    Hi, After upgrading to 10.0.6 and installing the latest Core Melt Lock and Load X plugin, I had a clip which was stablized, but a magenta flash appeared half way through the shot. If I remove the plugin from the clip it plays fine.
    Has anyone else seen this?
    Thanks

    I have the same problem with Lock & Load on my system after upgrading to 10.0.6. Also Neat Video Reduce Noise-plugin have similar problem. Can´t find any way to fix the problem.....
    Bjarne

  • Where to set lock while loading master data attributes

    Hello Experts,
    I have two different datasources from ECC which loads into 0CUST_SALES attributes. I'm using two different DTP & transformation which are loading data in the this infoobject attributes.
    When i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".
    Here what exactly  LOCK means?
    Thanks in advance.
    Zakir Khan.

    Hi,
    The lock means that some program is updating the master data (a table) and at the same time other program can not update that same master data. When the first program completes the updation it will release the lock so that the other program can update this.
    In your case you and schedule the DTP one after another.
    Thanks

  • The video tab in ipod is locked- cannot load dvd (.mp4 files) files to ipod

    I converted the dvd files to .mp4 files (Using cusoft).
    The files were loaded in the itune (by using add files to library). I can play the dvd in the itune on my pc but cannot transfer the dvd files to the ipod because:
    The dvd tab in the ipod is locked (white out). I can see the white out: [X] do not update video files .
    Since the dvd tab is locked out I cannot transfer the dvd files to the ipod. I used the latest verson of itune and ipod programs.
    Please reply directly to: [email protected]
    Urgent help will be highly appreciated.
    Thanks

    Sahay, 
    Welcome to Apple Discussions.
    You've posted in the iMac G3 forum - the users here, including myself, have little or no experience of using iTunes on Windoze. You'll be far better to repost your question in the iTunes for Windows forum.
    kind regards
    mrtotes

  • Re-locking boot loader

    I unlocked my Xperia Mini ST15i's boot loader, but never got around to flashing any kernel or ROM. I'm having a rebooting issue with the phone now, and want to try repairing it from a PC. Is there a specific procedure for re-locking the boot loader on an ST15i? (Also: after charging the battery fully, then rebooting, sometimes the battery appears half-empty, or even completely empty. Could this indicate the battery needs replacing?)

    My ST15i with 4.0.4 installed is rebooting automatically. Sometimes during boot (SONY or XPERIA logos), sometimes just after booting. Bluetooth is off. SIM and SD cards are removed. I have repaired the phone to 4.0.4 using both Bridge for Mac and PC Companion on Windows. The phone will boot successfully only when connected to power or computer via USB. If the USB cable is disconnected after booting, the phone instantly crashes. The battery charge indicator is all over the place. After charging to 100%, the next time the phone is connected the charge icon will only show half full, or after booting in Safe Mode it'll show something like 28%. I tested the phone using a brand-new battery at a phone shop and it still wouldn't boot successfully Any suggestions?

  • Material Masterdata Loading Error

    Hello All,
    I am loading Material Masterdata into 0Material_Attr.i have loaded data into PSA successfully. when i tried to move the data from PSA to info object using DTP, i am getting error "Record filtered in advance as error records with the same key exist".
    Diagnosis
        The existing DTP requires a serialized update because fields are updated
        non-commutatively during the processing run (for example, MOVE).
        Therefore all new data records that have the same semantic key as
        incorrect records that have not yet been corrected in earlier requests
        or earlier data packages of the same request, are filtered out after the
        extraction in a special step. In this way the system ensures that
        incorrect data records are not repeated for your changes, which may not
        contain errors themselves.
    System Response
        The data record is not updated but is written to an error stack.
    Procedure
        Correct all incorrect data records and update them using an error DTP.
    I don't know how to create Error DTP . what is the use of it ? can any body tell me the solution. i am getting this error for 6000 records.
    Regards,
    Komik Shah

    Go to the Update tab in your DTP, check the Handle Duplicate Record Key checkbox, Activate the DTP and re-start it.
    To create the error stack, while in the Update tab of the DTP, click on the Creating Error DTPs button. This will create a new DTP for processing the records that have been populated into the error stack.
    Edited by: Dennis Scoville on Oct 27, 2009 11:14 AM

  • AA3.0.1 Locking up loading session with UAD2 plugin

    When loading a any session in Adobe Audition 3.0 or 3.0.1 that uses the RealVerb Pro or Dreamverb plugins lock the session while loading the tracks (before it starts to load the files)... This effects UAD's 5.2, 5.3, and 5.4 software.
    I don'te believe it's the computer, I have this happening on 2 systems and 3 operating systems... And on the same computers the problem does not happen with Audition 2.0
    Details:
    System 1 (CBS Radio):
    Dell 3.1 ghz Core 2 Duo
    4 gig ram
    750 gig HD total
    UAD 1 running 5.4 software
    Windows XP Pro
    System 2 (Home Studio)
    3 ghz Core 2 Quad
    ASUS Rampage Formula MB
    8 gig of ram
    3.3 tb HD total
    UAD 2 running 5.4 software
    Windows Vista (32) ---- Problem exists with no SP, and with both SP1 and SP2
    Windows 7 (64)
    Any ideas?

    I finally got connected with support... thought trouble shooting, we found the problem has to do with loading 2.0 session with those plugins active. They are looking into it.
    If you have any problems like this, for now the only work around is to turn off those plugins when loading the 2.0 session, then turning the plugin on (not everything, just those two effected it seams)
    If you headbutt this problem, please feel free to PM me and I can walk you though the work around until their is a more final solution.

  • Local SWF File locked after loading.

    I have 2 swf files... the main.swf loads the secondary.swf
    main.swf is and will run on my local computer in the
    standalone flash player.
    When main.swf loads secondary.swf all is well except
    secondary.swf is locked on my local file system, I cannot rename,
    delete, or overwrite it as long as main.swf is running.
    I would like main.swf to load secondary.swf and then close
    the file, seems simple!! however I have had no luck in
    succeeding....
    I am using the standard methods for loading URLRequest and
    Loader.
    Any ideas!? Thanks!

    SOLVED
    Eventually, I found out the reason of the error. It seems due to security reasons pathes including ".." (up directory) are considered as unsafe!
    http://www.adobe.com/devnet/air/articles/introduction_to_air_security.html
    Unfortunately, it's not mentioned explicitly that the usage of such notation causes the security error.
    The solution is to process pathes before pass them to URLRequest e.g. by using the following routine:
    private function canonicalize_path(fn: String): String
         var f: File = new File(fn);
         f.canonicalize();
         return f.nativePath;

  • Adobe locks when loading pdf from sharepoint site

    We have sharepoint 2010 in our environment. most of our users have adobe reader x. Some have acrobat standard X as well. I personally have Adobe Reader XI. Some of our users see this issue
    Intermittently where when they are on the sharepoint site and they click on a pdf and say open as read only, if the user has adobe reader default to display in browser what happens is sometimes (not always) the page will just be blank and act like it is loading. This can take up to 8 minutes. Also, if the user has it open with the software and selects edit, the document takes just as long. I was wondering why the process of opening pdfs can be so slow sometimes. Any help is appreciated

    Hi MrSarcastic,
    Does this happen when the end users are trying to view the same pdf simultaneously?

  • HT204379 "source" locks at "loading" and no image-screensaver can be selected

    The problem that I am experiencing (and many others like me as I have noticed in several fora) is that the "source" when selecting an image screensaver blocks at "loading" while nothing happens and no (folder or aperture library) source can be selected. The problem started basically since Apple blocked the possibility to use a folder with images in subfolders as source for a screensaver as used to work perfectly in Snowleopard. But while Mountain Lion only works with iPhoto or Aperture libraries it made the system susceptible to windows like errors.
    When selecting a slideshow-screensaver, the source remains as "loading" where no options are given to select anything. It used to work until a few months ago, but I have no clue why it stopped or how I can get it to work again. When the slideshow screensaver is selected I get an error message telling me there was an error connecting to a netwerk server. No clue why it actually needs that server (which died some time ago). If i shutdown systempreferences while the slideshow is still selected, each time it tries to start the screensaver I get the same warning that there is a problem connecting to a (dead) airport extreme.
    I have tried to reinstall Mountain Lion, rebuild a new Aperture image library, remove certain .plist files that may be connected to this as was suggested in several fora, nothing works. I cannot imagine that Apple forces me to abandon Mountain Lion and to go back to Snowleopard over a screensaver.
    A hint to third party developers: please create a simple slideshow screensaver where you can select a folder including subfolders. It can't be that hard to create (although Apple fails completely).

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • SPM related masterdata loads: Variants doesnot exist

    Hi,
    We were trying to load the data through process chains(0ASA_XA_P27, 0ASA_XA_P14, 0ASA_XA_P13... etc) for GEOGRAPHY, CATEGORY, SUPPLIER etc. And the common failure we are getting is the corresponding program variants not exist.
    Program Name                                                 Program Variant
    RSXSA_HIERARCHY_UPLOAD                      SAP_XSA_GEOS, SAP_XSA_SLCAT, SAP_XSA_SGSUP
    These program variants are not available and hence the chain fails.
    Please let me know the possible solution.
    Thank you.

    Raj,
    Go to Transaction SE38, For Program RSXSA_DIVSTAT_UPLOAD, create the following Variant:
    Variant Name: XA_SUPDIV
    Variant Parameters >>
    Upload ID : 1
    Hierarchy name : SUPPLIER DIVERSITY
    InfoObject : 0XASUPPLIER
    Hierarchy-bearing attribute : 0XARPARENT
    Hierarchy root node : SUPPLIER DIVERSITY
    Go to Transaction SE38, For Program RSXSA_HIERARCHY_UPLOAD, create the following Variant:
    Variant Name: SAP_XSA_CUST01
    Variant Parameters >>
    Upload ID : 1
    Hierarchy name : CUSTOM01
    InfoObject : 0XSAC001C1
    Hierarchy-bearing attribute : 0XARPARENT
    Hierarchy root node : CUSTOM01
    Go to Transaction SE38, For Program RSXSA_UNSPSC_HIERARCHY_UPLOAD, create the following Variant:
    Variant Name: SAP_XSA_UNSPSC
    Variant Parameters >>
    Upload ID : 1
    Regards,
    Rohit

  • Locked on loading bar

    when we open IPhoto, the loading icon is continous.  It will not allow us to import any photos from either our IMAC or IPHONES, can anyone assist us please.

    Hi sammielou,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    Hope this information helps ...
    Judy

Maybe you are looking for