Alert configuration Add Rule Not Working in IE but working in FireFox

I am running into same issue with the Alert configuration Add Rule being disabled in IE. We're on SP 16. I can create the alert classification and alert categories through ALRTCATDEF.
But through IE, when i go into the Runtime workbench->Alert Configuration, though i can see the alert categories i created, i am not able to select any of them. So the Alert rules "Add Rule" and "Change Rule" are always disabled. How did you fix the issue in IE?
There are two posts about this issue. 
alert configuration  add rule  is disabled
creating rule in alert rwb
The second one post says to that this was working in FireFox and not IE.  Has anyone run into this with IE and then gotten it to work.  We have given all of the necessary roles to the user.
Thanks,
Jay malla
Licensed To Code

Hi Jay Malla,
I am not sure if you might have tried this, but to Add Rule, in your Alert Configuration, you first need to select your Alert Category.
At the bottom , on the left for every ALERT Category, you will find a rectangualr box. When you click on this, your ADD rule button gets enabled.
Regards,
Bhavesh

Similar Messages

  • People picker is not working for ie11 but working fine for other lower version

    i am using sharepoint 2010 and windows authentication
    recently i have updated my ie to ie11 and problem goes here.
    when i try to select from people picker, there are an unexpected error happened 
    however when i use other ie version, people picker work fine, what goes wrong?
    i have already added my system as trusted site
    if there any others thing i miss out?

    Hi,
    According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
    IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
    first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
    add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
    add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
    You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • My keyboard is not working in "Pages" but works with all other applications.  Please provide resolution advice.

    My keyboard is not working in "Pages" but works with all other applications.  Please provide resolution advice.

    What version of Pages?
    There are one or two of us here who are not intimately acquainted with your particular set-up.
    Peter

  • I have a Mac running 10.9.2. My wireless mouse with not scroll in mail but works fine in other applications? Any suggestions?

    I have a Mac running 10.9.2. My apple wireless mouse will not scroll in Mail but works fine in other applications.
    Any suggestions?

    First, see this discussion. If the solution suggested there doesn't work for you, continue.
    If you've installed a Mail plugin called "Mail Unread Menu" and you know how to remove it, please do that, then quit and relaunch Mail. Test. Otherwise, see below.
    Back up all data.
    1. Triple-click anywhere in the line below on this page to select it:  
    ~/Library/Mail/Bundles
    Right-click or control-click the highlighted line and select 
    Services ▹ Open
    from the contextual menu.* A folder may open, or you may get an error message that the item can't be found. Either result is normal. If the folder does open and has contents, move the contents to the Desktop. Relaunch Mail and test. If there's no change, put the contents of the folder back and quit Mail again.
    2. Repeat with this line:
    /Library/Mail/Bundles
    This time you may be prompted for your login password when you remove the items. Make sure they're removed from the folder and not just copied to the Desktop. If necessary, copy them first and then move the originals to the Trash.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Motion tracking is not working for videos but works for images?

    Motion tracking is not working for videos but works for images. When the videos is drop onto the tracking object the videos corner don't appear highlighted. I am working on windows 7 with version 13.1.

    ivanhoeeurope
    Are you within 30 days of purchase for the Premiere Elements 13? And, did you purchase as a download from Adobe? If so, you can
    apply for a return/refund for 13. If you purchased elsewhere, then you would be governed by the return/refund policy of the seller.
    Adobe no longer sells version 12, so you would have to find a vendor who still has it in stock and purchase it. There is no way to "downgrade"
    13 to 12.
    What you may want to do is to download and install the Premiere Elements 12 tryout from the following web site to verify that 12 Motion
    Tracking works for you; whereas 13 cannot with regard to use of video for the Motion Tracking source media.
    Adobe Photoshop Elements 12 Direct Download Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
    Apparently this web site does not sell the tryout. It just makes it available for use.
    Before I posted my reply to you I looked at Motion Tracking with video source media on both Premiere Elements 12/12.1 and 13/13.1 on the same Windows 7 64 bit computer.
    If any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • Text not appearing in Safari, but is in Firefox?

    Hello there,
    I've recently completed a webpage using Adobe GoLive. The thing is, any of the text in the pages will not appear in Safari, but does in Firefox, IE etc. I've changed about the character encoding, but nothing's worked for me.
    Another funny thing is, the if I make any of the text a hyperlink, then it does display in Safari (just the linked bit).
    I'm completely stumped!
    You can see my problem here: http://www.ireland-kilkenny.com
    I created part of the site using iWeb:
    http://www.ireland-kilkenny.com/pastnpresent/Past%20%26%20Present.html
    I'm really stuck for a solution to this!
    Seamus.

    Why is Safari so particular about coding standards, when other browsers will display the page with no problems at all?
    Safari is one of the younger browsers out there and so the developers concentrated on the core established standards - as time goes on they slowly add more of the 'quirks' that other browsers allow website designers to get away with
    WebKit is the core rendering engine of Safari and the developers have a website that shows what they've been working on. They also let you download a version of Safari that has been built with this WebKit to let you test out if various bugs have been fixed:
    http://webkit.opendarwin.org/

  • The "new" hotmail no longer works with safari, but works with firefox. Hmm.

    The "new" hotmail no longer works with safari, but works with firefox. Hmm. i find this very convenient being a microsoft product. anybody else wonder why this new version happens to not be safari compatible? does anybody know if it works on the PC version of safari? if not, i find this to be a blatant move on microsofts part to bias the safari browser (especially since its basicly new on the window platform). forcing safari/hotmail users to "have" to use another browser to access their hotmail accounts.

    I have been successfully using Hotmail and Gmail with Safari for a long time. For roughly the past month, that relationship is rocky at best. At times, one of the following actions suddenly opens Hotmail, but it is a short-lived solution:
    (a) Hotmail directly
    (b) Hotmail Home>Hotmail
    (c) Sign up to Windows Hotmail
    (d) Deletion of prescribed cookies, resetting, etc. - made no difference
    Both Firefox and Opera work fine with Hotmail - especially Opera is very fast.
    In addition, Safari and Gmail does not work with Attachments, but otherwise Gmail is OK.
    I suspect I have to wait for a Safari fix because in my case I do not wish to abandon Hotmail, and Safari is a given. I would think that Safari would want to stay competitive with the two biggies, Hotmail and Gmail, which must have large numbers of users.
    I certainly would appreciate any other suggested fixes.

  • Alert Category in rule not yet confirmed.

    Hi All,
      I am getting the following error in Alert log
        Error :
    "Alert Category ALERT_CCMS in rule not yet confirmed, Skip creation of new alert".
      I have followed all the steps in the Monitoring setup guide
       for sap xi 7.0 ( 2004s) sps 12
      but still not getting alerts to inbox
    Can anyone help me in overcoming this error?
    Regards
    KLK

    HI,
    In the Alert Inbox check whether you have confirmed the Alerts which are already generated.
    If supress alerts check box is check for alert rules , if the previous alert is not confirmed the next alert wont be triggered.
    Check the Report RSALERTPROC and delete the Old alerts.
    Thanks,
    Tanuj

  • Flash player not loading on http but works on https

    I have an issue where flash player shows "movie not loading" on http pages but works fine on https.
    I am using windows 7 64 bit, ie9 64 bit, i have tried it with the latest firefox and chrome and i still get the same issue.
    This started with flash player 10.3, the 10.2 version did not have this problem and all subsequent versions have the same issue. i am currently using the 11.2 version of flash.
    Example: Any flash video on youtube with the address beginning with HTTP, the video screen is black and when you right click you get movie not loading and the correct version of the flash player. If you change the header over to HTTPS the video works fine. this wouldnt be much of a problem except when going to any other website that has flash as its main element but does not have an HTTPS version, you cannot use the page or its features.
    I have uninstalled and reinstalled several times, done a clean install, deleted all files and updated every area of my computer but this issue remains. I have read the forums here and done any suggestions listed to no avail and noticed many people have this type of problem. This issue has now been going on for almost 6 months. Can anyone help?
    I may have posted this in the wrong forum and I appologize. If so can you please move it to the correct location?

    I don't claim to know the solution to your problem, but in your situation I would try either or both administrator install methods: 1) Right-click the downloaded install file, choose "Run as Administrator" and install the software as usual. 2) Try using a different Windows account that you are positively certain has full administrator rights or the actual Administrator login name, install with that account.
    Also, make sure you empty the browser cache before retrying the http pages. What about other browser settings, like security or privacy settings? Any add-ons or antivirus browser helper objects?
    Do you only use Internet Explorer, or is this issue the same in Firefox, Opera, Chrome and Safari?
    Good luck, hope you get the error fixed.

  • Motion tween created not works after exporting,but works in TEST MOVIE(ctrl+enter)

    I am using adobe flash cs4 and actionscript3
    my project consists several different layers using classic motion tween option available in flash cs4
    my project works fine when I test the movie using Ctrl+Enter
    but after exporting my animation remains stationary
    If any one knows how to solve this please do reply me. It will be very helpful to me
    Even it is a simple setting please do reply me .
    It is very urgent.
    thank u in advance

    Are you using any ActionScript at all or is it all just motion on the timeline?
    If you're not using any AS then you can try to add a little to force it to play. Just add a new layer at the very top. Click on the first frame (which shoudl be a keyframe - if it's not make it one) and press F9. This will open your Actions window. In the window type "play();" (without the quotes). Not sure if that will work or not but it's worth a try!
    If you are using AS make sure you don't have a stop(); action anywhere that's not being controlled.
    Good luck!

  • Wireless not working in linux, but works fine in windows vista

    Hello!
    I have installed Unbreakable Enterprise Linux 4 in a dual boot config. with Window Vista on a Compaq Presario laptop. After install completed I found that my on board Broadcom Wireless Adapter (Dell 1390 Mini PC card) was not recognized. I have tried installing NDISwrapper versions 1.48 and later 1.47 (after uninstalling 1.48) because everytime I got to the "modprobe ndiswrapper" received a fatal error about an unknown symbol or parameter, and on install I also encountered a "CONFIG_4KSTACKS" error as well. The good part is the light on my laptop for the wireless adapter finally came on and the driver (bcmwl5.inf) appears to be installed and the wireless adapter identified as being present, but it still doesn't show up in the network manager gui interface. So I am out of ideas if any one can give me a suggestion for a solution I would appreciate it.

    Hi there,,,,,
    I have Oracle Enterprise Linux 5 installed and Intel wifi 5100 card installed on my laptop. Wireless card does not work in Linux it works fine with Vista, I have dual boot. I have downloaded and installed the microcode for the wireless card for Linux,,,it is now active but it does not take ip address from dhcp and nor does it connect when i supply manual ip. it does not even scan for any wireless network. I have WEP enabled on my wireless network. It just says disconnected.....
    Please help me.....i have been trying to get this thing work for 3 weeks.
    thanks.

  • Page is not working in serverside but working correctly in JDEV

    Hi,
    After deploying the page which is working propely in my local machine JDEV,
    its not working same at server side. i bounced apache couple of time.
    if any one faced similar issue, please share.
    Thanks,
    Mahesh

    Pages are working fine in my loacl machine, but whn i compile pages (javacode) at server and running the pages from apps instance, pages are not working correctly. But whn I transfer the class file from local machine to server side page is working perfectly, what would be the reason.How to check the Java/JDK version
    D:\>cd jdevbin
    D:\jdevbin>cd bin
    D:\jdevbin\bin>java -version
    java version "1.3.1_01" -- Java Version on local machine
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_01)
    Java HotSpot(TM) Client VM (build 1.3.1_01, mixed mode)
    On server
    [apeafin19@camoraapp10 ~]$ cd $ORACLE_HOME
    [apeafin19@camoraapp10 8.0.6]$ pwd
    /u01/oracle/eafin19ora/8.0.6
    [apeafin19@camoraapp10 8.0.6]$ cd bin
    [apeafin19@camoraapp10 bin]$ java -version
    java version "1.4.2_12" -- Java Version on server machine
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
    Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
    [apeafin19@camoraapp10 bin]$
    You can see the difference of JDK installed on server and on our local machine which can be root cause of the issue
    Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Top Nav buttons not working after publish, but works in app. WHY?

    I have tried to find out why these buttons will not work after publishing. They work fine while in the iWeb app, but not when publishing. I do not have any objects near the top nav buttons. The first site went off without a hitch
    <www.serenitycustompools.net> the second site began the problem with the last page, the nav buttons would not work. Now this 3rd site, none of the nav buttons at top will work after publish, but will work in app. Anyone else having the same probs? None of my pages have the same names or any punctuation marks, and they are simple one word named pages.
    mini intel   Mac OS X (10.4.9)  

    They all work for me, try clearing your browser cache or using another browser.

  • Select query not working in Dev but working in QA and PRD

    Hi All,
    I have a select query with inner join which is not working in the DEV but working in QA and PRD. Anyone has any idea why is it happening, I think it to be a basis issue. Just want to confirm if anyone has any other idea.
    Thanks in advance,
    Barjinder Singh.

    Hi Barjinder Singh,
    In development you can't find the records for the table.
    In testing system only you can test even the program(report).
    If it is the DEV system you can't get the data.
    Go and see into the table wether it has records or not(in DEV system).
    It doesn't has the records in DEV system.
    Regards,
    Balakrishna.N

  • Exchange server not aviable on OSX but works fine on IOS

    Using coorperate Exchange server i suddenly cannot acces my exchange mail leaving the HQ (outside the firewall) on my Macbook air.
    This has worked fine earlier but apperently our company upgraded the firewall or changed the port settings.
    My mail and calender works fine on my iphone and ipad.
    Any sugestions how to install an app or program on my MB Air or to bypass the upgraded security settings?
    Ps. MAC is not a company standard, and I would be very sad to convert to an old Dell computer.
    Thanks.

    Since MAC is not cooperate standard they will not....
    is it possible to use mail the same way as on iPhone (IOS) on my Mac (OSX) ?

Maybe you are looking for

  • 2LIS_04_P_ARBPL; incorrect Delta; missing personnel number in confirmation

    Hi I'm facing following problem. I made a new setup of LO-extraction 2LIS_04_P_ARBPL just for one order. The order has one operation "10"  with one quantitiy confirmation from person "123". INIT-Load: I get the data correct . Delta-Load: I get the qu

  • Hyperion add-ins in Excel

    hi, after added the hyperion add-ins (for installing smartview), my user has difficulting working on her normal excel file which is 10mb size. she is not connect to the application but when she click on the worskheets on her excel file, it takes seve

  • Empty pdf files?

    I'm saving an online document, but when i retrieve it, I get  a warning message that it cannot be open, because the file is empty.  What am I doing wrong?

  • Creating MailBox-enabled Users In Active Directory Using JNDI

    Thanks to the Various code samples i have come across in this forum i have been able to use the JNDI API to add a new user to the Microsoft Active directory. The user account that was added using a combination of the various code samples was already

  • CS5.5 Illustrator freeze after sleep

    I just upgraded from cs4 to 5.5 and also upgraded suitcase fusion 2 to fusion 3. I am on snow leopard. Never had this problem when I was on cs4 with fusion 2... After I wake up the computer from a few hours in sleep mode Illustrator has a spinning ba