Alert Configuration / Alert Inbox - "404 Not Found" in PI 7.0

Hi ,
We are trying configure Alert Framework in PI 7.0.
When we are opening the Alert Configuration page through the link
http://<Hostname>:5<Sys.No>00/rwb/index.jsp -> Alert Configuration we are getting error " 404 Not Found"
But when we changed the exchangeProfile parameter com.sap.aii.rwb.server.centralmonitoring.httpport from 5<Sys.no>00 to 8<sys.no>0 we got the page displayed there.
But when we click that page it asks for authentication again !!!
And where we need to fix this redirection problem from 5<sys.no>00 to 8<sys.no>0 ..
the parameter -> icm/HTTP/j2ee_0
is holding this value
PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
Please suggest.
Thanks &Regards
Mrutyunjay

Could you please post the details..
We are also facing the same issue.
Thanks in Advance.
Regards
Sujan

Similar Messages

Alert configuration or Alert Inbox-----404 Not Found

Hi,
In RWB, When I click Alert configuration or Alert Inbox
the following message is displayed
404 Not Found
SAP J2EE Engine/6.40
The requested resource does not exist.
Details: Go to main page of this application!
Is this due to installation problem ?
How to fix this ?
Thanks,
ss

Hi,
check the following entries in your Exchange Profile:
com.sap.aii.rwb.server.centralmonitoring.r3.ashost --- Must be full qualified
com.sap.aii.rwb.server.centralmonitoring.httpport --- 80<SysNo> or see SMICM -> Goto -> Services: http-Port
Normaly you only need to refresh you RWB with the following link:
http://<System>:<Port>/rwb/rtc?op=init
if this doesn't work try to restart the complete ABAP Stack.
Good luck!
Chris

Runtimeworkbench- Allert configuration buttonclick - 404   Not Found

hi friends,
I am new to PI, appreciate your help on this
when i click the button "Allert configuration" in Run time workbench it says
The requested resource does not exist.
appreciate if you tell me what should i do to fix this and how to go inside Allert confiruration in runtime work bench
many thanks
Iver

Hi
use thread with same problem will help u
Alert configuration - 404 Not found
XI alert configuration
Alert Configuration / Alert Inbox - "404   Not Found" in PI 7.0
Alert Configuration error 404
Alert configuration or Alert Inbox-----404 Not Found
Re: Alert Configuration in RWB 404   Not Found
Alert Configuration Error on RWB
Alert configuration or Alert Inbox-----404 Not Found

Alert Configuration : 404 Not Found The requested resource does not exist

Hi all ,
We are facing problem in Alert configuration and
Alert Inbox . We are on SP14 service patch
We are getting error as " 404 Not Found The requested
resource does not exist "
We have activated all the necessary services in
Tcode : SICF as mentioned in the config. guide
We have executed the program :
SXMB_ACTIVATE_ICF_SERVICES
We have referred the SAP note : 750287 and tried to
set the httpport as per the note but again we are
getting error as "The page cannot be displayed" .
We have checked the parameters in Exchange profile
for httpport as well as for host also .
Can someone please guide us on this .
Thanks
Shikha

Hi all ,
Thanks for the replies .
Shravan ,
I pinged my XI and is working . we have already added
the IP Address and the host name , but the same error
is coming .
Anirban,
Checked all the necessary services again as suggested
by you .
Andreas ,
> is to set the abap profile parameter
LOCALHOSTFULL to the fqhn.
Can you please let me know where to set the abap
profile parameter "LOCALHOSTFULL" as suggested by you .
Thanks
Shikha

Links "alert configuration" & "alert inbox" show page not found error

Hi,
One of our test servers is at SP9, SR1 installation.
When i tried to access <b>"Alert Configuration"</b> , <b>"Alert Inbox"</b> links in RWB, the link pages dosen't get dispalyed. It gives the follwing error
404 Page not found ... The requested resource does not exist.
Should we try redeploying RWB sda..?
cheers,
Siva Maranani.

Hi Siva,
I'm Pruthvi working in SAP-XI.
When I try to click on the Alert-Configuration and Alert-Inbox I'm getting the same error you got :
404 Not Found
The requested source doesnot exist
From your blog I got to know the below things :
1) We will get HTTP port number and full host name value from the t-code SMICM -> Goto -> Services
2) We have to give the HTTP port number value in Exchange Profile in com.sap.aii.rwb.server.centralmonitoring.httpport
3) We have to give the full host name value in Exchange Profile in com.sap. aii.rwb.server.centralmonitoring.r3.ashost
4) Also I have checked in the t-code SICF and all the required services as described in sap note 768456 were present over there.
Apart from the above do I need to check for anyother services (or) parameters that needs to be installed for setting the alert configuration.
Also You said that PMI store is already configured during post-installation steps
Can you please let me know what is PMI store and how to check it is configured (or) not and also where to see it.
Thanks and Regards,
Pruthvi

Alert configuration - 404 Not found

Hi, on our PI 7.0 i wanted to get in contact with alert configuration. Unfortunately this does not be activated or sth.I am getting 404 not found. Does somebody have a clue how to activate or install this?!
br Jens

/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - this weblog should help you with a checklist
Further reference:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Roles for Alert Management
1. SAP_ALM_ADMINISTRATOR
2. SAP_ALM_CUSTOMIZER
3. SAP_BC_ALM_ALERT_USER
Sap Notes - 913858 ,824039, 750287

Not able to use Alert Configuration/Alert Inbox in the Runtime Workbench

Hi Experts,
I have installed PI 7.1 on my system. I'm not able to use the Alert Configuration/Alert Inbox in the Runtime WorkBench. It is asking for a logon and the logon which i used for ABAP & Java Stack is not working.
e.g., For ABAP Stack, the User Id is: "sapuser" & For Java Stack, the User Id is: "pisuper". But, both these User Id's are not working for the Alert Configuration/Alert Inbox in the RWB.
Can someone pls suggest me, how to proceed?
Br
G@nesh

Hi Preethi,
Can u pls help me, how to check whether the relevant roles are assigned to this user i.e., pisuper for the JAVA stack in the UME or not? i even tried to use Alert Configuration/Alert Inbox with the User ID: ddic & j2ee_admin, but it too didn't work...
I would like to use Alert Configuration/Alert Inbox with my User Id: pisuper, which i'm using to logon to the JAVA stack
while exploring, i logged on to the useradmin page i.e., http://p71:58800/useradmin with the User Id: j2ee_admin... If this is correct, can u pls let me know how can i add the necessary roles to my User Id: pisuper so that i can use Alert Configuration/Alert Inbox with my User Id: pisuper
Br
G@nesh

HTTP 404 Not Found Error in Process Control Mail

Hi All,
I am working on version 9.3.3
I have setup e-mail alerts through a SMTP server.
When I am going on Process control and starting the cycle OR promoting to any level, I am getting a Minimized window showing HTTP 404 Not Found error and Mail is not going.
Whereas My ICP mail alerts are working fine
Please suggest something to resolve.
Regards,
Jai

Hi Jai,
Check the below documents, which might be helpful to you.
Financial Management Error "Server object error ASP 0177 : 80131040" When Sending Email Alerts (Doc ID 830823.1)
Financial Management Error "HTTP 500 Internal Server Error" in Process Management E-Mail Alerting (Doc ID 855942.1)
Process Control Email Alerts Are Not Working For Certain Entities and Entity Hierarchies (Doc ID 1160594.1)
Hope this helps,
Thank you,
Charles Babu J
Edited by: CJX on Jan 30, 2012 7:08 AM

DADs on WLS 11g (version 10.3.6.0) do not work (Error 404--Not Found)

Actually we use Application Server 10g (version 10.1.2.3.0) for different Forms 10g Applications (roundabout 1000 Forms) and want to change to Forms 11g and Weblogic Server 11g (version 10.3.6.0). A Test-Application on the Weblogic Server works fine, but DAD’s do not work at all.
In Enterprise Manager 10g i can configure DADs within the GUI of the Enterprise Manager, where i can see, if a connection could be established or not.
In Enterprise Manager 11g Fusion Middleware Control this doesn't seem to exist anymore, so i tried to configure the DADs manually, but something has to be wrong or missing, because there is no connection to the database and the following error appears:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I added several DAD’s to /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql/dads.conf like this:
<Location /pls/jd-download-dev>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername w_web_user_download
PlsqlDatabasePassword @BWKChfgPacV6yQL40lIKZqXUUA9wC4cmAw==
PlsqlDatabaseConnectString jddev TNSFormat
PlsqlNLSLanguage German_Germany.WE8ISO8859P1
PlsqlAuthenticationMode Basic
PlsqlDefaultPage w_anwendung.p_web_show_document
PlsqlAlwaysDescribeProcedure Off
PlsqlErrorStyle DebugStyle
</Location>
The passwords were obfuscated with dadTool.pl and the http-Server restarted with /opt/oracle/product/Middleware/asinst_1/bin/opmnctl restartproc process-type=OHS
The files /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql.cache.conf and /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/moduleconf.plsql.conf were left unchanged.
Our Test-Application generates the following link
'http://172.106.2.7:9001/pls/jddevdev/B_ARCHIVE.P_ARCHIVE_VIEW?docfid=200'
that seems to be ok, because when i replace IP and port with our old IAS it works fine, but the WebLogic Server generates the above mentioned error.
To get some more information i searched an error_log in /opt/oracle/product/Middleware/asinst_1/diagnostics/logs/OHS/ohs1 but there isn’t any.
I used the following Documentation for configuring the DADs which is for HTTP Server 11g Release 1 (version 11.1.1), because I could not find one for version 10.3.6.0:
http://docs.oracle.com/cd/E23943_01/web.1111/e10144/under_mods.htm#i1055269
So probably there are differences between configuring version 10.3.6.0 and version 11.1.1 and so something is wrong configured or missing...
Thank you in advance for your help
Udo

Hi Raj,
it is a Sparc Solaris 10
and yes that's my enviorment.
After some more tests it's seems it's not a real bug but no realy nice working solution.
Eclipse uses for all instances the same secure storage, where OEPE also saves the password.
And if I look right the pasword was saved without the user context, so if you use an other user he takes the same password from the old user.
and I doesn't know how do OEPE check the connection in reality or only reply the last failed login message.
After deleting the complete secure storage and test it again with the juno version it works well.

APEX Listener 2.0 - RESTful Services Failure with 404 - Not Found

Versions used:
* APEX Listener 2.0.0.354.17.05
* Application Express 4.2.1.00.08
* Oracle Database 11.2.0.1
When testing the sample RESTful Service Module oracle.example.hr I always get 404 - Not Found page.
I followed the documentation to install and configure APEX 4.2 and the Listener 2.0. Everything in my APEX installation works fine except RESTful Services.
For example, when calling this RESTful Service:
http://company.com:45678/apex/DEV/xxuapex/hr/empinfo/
I get a 404 page.
The corresponding entry in url-mapping.xml is:
<pool base-path="/DEV" name="od01" workspace-id="xxuapex"/>
where xxuapex is the name of the schema as well as the workspace where the RESTful Service is installed.
Moreover, the corresponding od01.xml, od01_rt.xml and od01_al.xml in the conf directory seem correct.
Any help is greatly appreciated.
Thanks.
Eddie Awad.

Hi Eddie,
+> try the other option base-url of the url-mapping+
I did. No change. Still getting 404.When active it should transform the 404 page into a detailed 404 with a description of what the error is. Just to be sure, this is activated in the defaults.xml file of the APEX Listener as: *<entry key="log.logging">true</entry>*.
You should then see a detailed 404 output in your browser of what's going wrong first of all.
+> Could you post your url-mapping.xml file?+
<?xml version="1.0" encoding="UTF-8"?>
<pool-config xmlns="http://xmlns.oracle.com/apex/pool-config">
<pool base-path="/DEV" name="od01" workspace-id="xxuapex"/>
<pool base-path="/TEST" name="ot01" workspace-id="xxuapex"/>
</pool-config>
Despite using the url mapping script, it didn't map mine correctly and had to edit it manually. It was the use of "apex" that got it to work for me:
*<pool base-path="/" name="apex" workspace-id="workspace-name-here" updated="2013-01-09T20:48:59.75Z"/>*
Nick.

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

EPM 11.1.2.3 ,Error 404 - Not Found

Hi All,
I am getting the following error after my installation and configuration of EPM 11.1.2.3 and when I try to access the Workspace URL.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol --
HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the
Request-URI. No indication is given of whether the condition is temporary or
permanent.
If the server does not wish to make this information available to the client,
the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code
SHOULD be used if the server knows, through some internally configurable
mechanism, that an old resource is permanently unavailable and has no forwarding
address.
I installed 11.1.2.3 in windows 7 ultimate OS and 64 bit and using sql server 2005 Database and configured Essbase,planning, hfm, arm, fcm,fdm ,hpcm, , everything was configured successfully but when I open the workspace URL it is throwing "Error 404 not found"
I tried accessing http://machinename:7001/console (I replaced machinename with my machinename)
even here I am getting the same error, but I checked the database and it has the table hss_component_types and it is populated with the various products.
could you guide me
Regards,
SG
The following is the error I am getting in C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services
<Jul 9, 2013 7:30:18 PM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jul 9, 2013 7:30:18 PM CDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jul 9, 2013 7:30:18 PM CDT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\audit-client.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\css.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ctg_custom.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ldapbp.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\opencsv-1.8.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\registry-api.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\wlpool.jar>
<Jul 9, 2013 7:30:18 PM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 from Oracle Corporation>
<Jul 9, 2013 7:30:47 PM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Jul 9, 2013 7:30:57 PM CDT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://SUBHASUBBU:7001.>
<Jul 9, 2013 7:30:57 PM CDT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Jul 9, 2013 7:30:57 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jul 9, 2013 7:30:57 PM CDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log00002. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log.>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log is opened. All server side log events will be written to this file.>
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty(user.name)=SUBHASUBBU$
OracleFileSSOWalletImpl.getWalletData: locking (shared) dummy sso file..
OracleFileSSOWalletImpl.getWalletData: locking (shared) sso file..
Oracle Wallet: wallet size 8349
OracleWallet: getSecretStore
OracleSecretStore: loading wallet from stream
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Loading wallet from stream
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
Processing TP 0
Storing TP 0 as CN=Entrust.net Secure Server Certification Authority
Processing TP 1
Storing TP 1 as CN=Entrust.net Secure Server Certification Authority 1
Processing TP 2
Storing TP 2 as CN=Entrust.net Certification Authority (2048)
Processing TP 3
Storing TP 3 as CN=GTE CyberTrust Global Root
Processing TP 4
Storing TP 4 as OU=Secure Server Certification Authority
Processing TP 5
Storing TP 5 as OU=Class 1 Public Primary Certification Authority
Processing TP 6
Storing TP 6 as OU=Class 2 Public Primary Certification Authority
Processing TP 7
Storing TP 7 as OU=Class 3 Public Primary Certification Authority
OracleKeyStoreSpi: Storing Secret0
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret1
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret2
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret3
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Keystore Loaded
OracleWallet: getSecretStore
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty(user.name)=SUBHASUBBU$
OracleFileSSOWalletImpl.getWalletData: locking (shared) dummy sso file..
OracleFileSSOWalletImpl.getWalletData: locking (shared) sso file..
Oracle Wallet: wallet size 3941
OracleWallet: getSecretStore
OracleSecretStore: loading wallet from stream
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Loading wallet from stream
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
Processing TP 0
Storing TP 0 as OU=Class 1 Public Primary Certification Authority
Processing TP 1
Storing TP 1 as CN=GTE CyberTrust Global Root
Processing TP 2
Storing TP 2 as OU=Class 2 Public Primary Certification Authority
Processing TP 3
Storing TP 3 as OU=Class 3 Public Primary Certification Authority
OracleKeyStoreSpi: Storing Secret0
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret1
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret2
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret3
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Keystore Loaded
OracleWallet: getSecretStore
<Jul 9, 2013 7:31:19 PM CDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jul 9, 2013 7:31:19 PM CDT> <Notice> <Security> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\security\boot.properties>
<Jul 9, 2013 7:31:41 PM CDT> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EPMServer0 has been migrated to backup server and the backup server is accessing the TLOG of EPMServer0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Jul 9, 2013 7:31:42 PM CDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 9, 2013 7:31:42 PM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log00002. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log.>
<Jul 9, 2013 7:32:18 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jul 9, 2013 7:32:18 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Using OraclePKI Provider
javax.net.ssl.TrustManagerFactory supported
javax.net.ssl.KeyManagerFactory supported
Using OracleJSSE103 Provider
<Jul 9, 2013 7:32:21 PM CDT> <Warning> <JDBC> <BEA-001552> <The logging last resource (LLR) data source accountreconciliation_datasource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Jul 9, 2013 7:32:21 PM CDT> <Warning> <JDBC> <BEA-001552> <The logging last resource (LLR) data source financialclose_datasource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Jul 9, 2013 7:33:42 PM CDT> <Warning> <Security> <BEA-090668> <Ignored deployment of role "Admin" for resource "type=<url>, application=DMS Application#11.1.1.1.0, contextPath=/dms, uri=/">
<Jul 9, 2013 7:33:47 PM CDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'ACCOUNTRECONCILIATION [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
Truncated. see log file for complete stacktrace
>
<Jul 9, 2013 7:34:12 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RuleService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:34:12 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RuleService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:34:13 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps\AppServer\InstallableApps\Common\aps.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:34:13 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\APS_11.1.2.0\mizf54/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:35:15 PM CDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'FINANCIALCLOSE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
Truncated. see log file for complete stacktrace
>
<Jul 9, 2013 7:35:44 PM CDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: com/oracle/adfm, Specification-Version: 1, referenced from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\FMADFWEB_11.1.2.0\nw1g9o]. Make sure the referenced optional package has been deployed as a library.>
<Jul 9, 2013 7:35:49 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'ActionsService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:35:49 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'ActionsService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:36:57 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\SHAREDSERVICES_11.1.2.0\dt7o9d\interop.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\odi\setup\manual\oracledi-agent\oraclediagent.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\oraclediagent\cn250y/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.bam.odi.library, Specification-Version: 11.1.1, referenced from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\oraclediagent\cn250y]. Make sure the referenced optional package has been deployed as a library.>
<Jul 9, 2013 7:38:13 PM CDT> <Emergency> <Deployer> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
Hyperion Provider Services - Release 11.1.2.3.4408
Copyright (c) 1991, 2013 Oracle and / or its affiliates. All rights reserved.
connection mode : HTTP
essbase.properties: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0/bin/essbase.properties
java System properties -DESS_ES_HOME: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0
Mode: Non Fusion read from Registry
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Component was found from component type DISC_MAN_PRODUCT
Updating version Disclosure_dbVersion with DISC_MAN_PRODUCT
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 46
Essbase® Administration Services - Version 11.1.2.3.000.4415
Copyright © 1991, 2013 Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the recipient's personal use, without the express written permission of Oracle.
US Patent Number 5,359,724
US Patent Number 6,317,750
Current time stamp: Tue Jul 09 19:38:54 CDT 2013
Server started successfully
Waiting for client requests
HRContextListener::contextInitialized
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 203
- WEBLOGIC
null
- The AMHM configuration file path is..nullconf
- getting attributes for bsp.jsr: [Migration, Ant-Version, Manifest-Version, Created-By, Version]
- going to get value for Migration attribute
- Encryption Type : AES
- Invocation of generateSecurityFile Successful
- userName :
- ServiceID :
- applicationName :
- Configuration File (config.xml) does not exist under C:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1\config.xml Process aborted.
- Migration Failed
Utf8Filter: forceRequestCharacterEncoding set to true (init-param=true)
Utf8Filter: repairRequestParameters set to false (init-param=false)
Utf8Filter: rebuildPathInfo set to false (init-param=false)
Utf8Filter: revertRequestURI set to true (init-param=true)
Utf8Filter: settings are true/false/false/true
Initializing CORBA ORB.
CORBA ORB initialization complete.
Loading configuration from registry
WSBaseServlet.setDefaultGSMContext(): Servlet GSM context. host=192.168.204.1:6800
Log configuration: file:/C:/Oracle/Middleware/user_projects/epmsystem1/ReportingAnalysis/RAFrameworkWebapp/WEB-INF/logging.properties
<Jul 9, 2013 7:39:39 PM CDT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Jul 9, 2013 7:39:39 PM CDT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EPMServer.>
<Jul 9, 2013 7:39:44 PM CDT> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on fe80:0:0:0:0:5efe:c0a8:ed01:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[9]" is now listening on fe80:0:0:0:0:100:7f:fffe:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[13]" is now listening on 0:0:0:0:0:0:0:1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:cc01:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:c0a8:7:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[12]" is now listening on 127.0.0.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on fe80:0:0:0:3415:3499:e650:c29e:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[10]" is now listening on fe80:0:0:0:2d02:d309:55d5:a150:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[11]" is now listening on fe80:0:0:0:5894:d88c:c022:f32b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.204.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 192.168.0.7:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:c885:cffb:be7a:3e0b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:1d4d:5292:d06b:f62b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.237.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EPMServer0" for domain "EPMSystem" running in Production Mode>
<Jul 9, 2013 7:40:09 PM CDT> <Warning> <Server> <BEA-002611> <Hostname "SUBHASUBBU", maps to multiple IP addresses: 192.168.204.1, 192.168.237.1, 192.168.0.7, fe80:0:0:0:c885:cffb:be7a:3e0b%18, fe80:0:0:0:1d4d:5292:d06b:f62b%20, fe80:0:0:0:3415:3499:e650:c29e%15>
<Jul 9, 2013 7:40:09 PM CDT> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Jul 9, 2013 7:40:11 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jul 9, 2013 7:40:11 PM CDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
<Jul 9, 2013 8:11:16 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSS_COMPONENT_TYPES WHERE 1 = 0" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:11:16 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM V8_VERSION WHERE 1 = 0" set up for pool "raframework_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:11:54 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,190 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:04 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,198 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:19 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on 0:0:0:0:0:0:0:1:54,216 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSS_COMPONENT_TYPES WHERE 1 = 0" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM ARM_ATTRIBUTES WHERE 1 = 0" set up for pool "accountreconciliation_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM AIF_LOOKUP_MAPPINGS WHERE 1 = 0" set up for pool "aif_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM CALCMGRCONFIG WHERE 1 = 0" set up for pool "calc_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM DISCMAN_COUNTER WHERE 1 = 0" set up for pool "discman_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM SERVERLOGID WHERE 1 = 0" set up for pool "eas_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM FCC_USER_ATTRIBUTES WHERE 1 = 0" set up for pool "financialclose_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REP" set up for pool "odiMasterRepository" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REP" set up for pool "odiMasterRepository" failed with exception: "java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REPW" set up for pool "odiWorkRepository" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSPSYS_CLUSTER WHERE 1 = 0" set up for pool "planning_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HPM_APPLICATION WHERE 1 = 0" set up for pool "profitability_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:18:49 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,579 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:22:29 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,820 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:29:44 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:55,178 during the configured idle timeout of 5 secs>

First of all "I installed 11.1.2.3 in windows 7 ultimate OS", it is not a supported OS so if you want assistance problem solving you should stick with a supported OS.
It also looks like you have installed a whole range of products some requiring additional configuration and the requirement of SOA.
I recommend starting with a support OS and only install products that are required.
Cheers
John
http://john-goodwin.blogspot.com/

While processing a message : Error HTTP 404: not found

Hi gurus,
I'm stuck on a File-XI-IDoc scenario.
Here is the message i get in the Message Tool Display:
Erreur lors de la transmission du message au point d'accès http://rchase12:53000/sap/xi/engine?type=entry via la connexion File_http://sap.com/xi/XI/System. Motif : com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 404 : Not Found
It's in French but it it's like my url is not good. I read about the port that must be 80xx in place of 53000 is it true?? I can't find any information about it, in another place than some forum topics.
Could anyone help me?
Thanks in advance.
Thomas

Hi,
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
u2022 404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
u2022 Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
u2022 If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
u2022 If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
Regards,
Shabari

Error 404--Not Found while accessing web app through Weblogic 6.1

Hi everybody,
          I am new to Weblogic and recently installed Weblogic6.1
          on my machine and I am trying to access my application using weblogic
          and it gives
          Error 404--Not Found
          From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
          10.4.5 404 Not Found
          I have uploaded the WAR file of my application using the Admin
          console. The WAR file is place under
          \bea\wlserver6.1\config\mydomain\applications\screen.war.
          What am I doing wrong ?
          Thanks is advance.
          PS: I am also including my web.xml file
          <?xml version="1.0" encoding="ISO-8859-1"?>
          <!DOCTYPE web-app
          PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
          "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
          <web-app>
          <session-config>
          <session-timeout>-1</session-timeout>
          </session-config>
          
          <servlet>
          <servlet-name>action</servlet-name>
          <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
          <init-param>
          <param-name>application</param-name>
          <param-value>resources.nmr.ApplicationResources</param-value>
          </init-param>
          <init-param>
          <param-name>config</param-name>
          <param-value>/WEB-INF/struts-config.xml</param-value>
          </init-param>
          <init-param>
          <param-name>debug</param-name>
          <param-value>2</param-value>
          </init-param>
          <init-param>
          <param-name>detail</param-name>
          <param-value>2</param-value>
          </init-param>
          <init-param>
          <param-name>validate</param-name>
          <param-value>true</param-value>
          </init-param>
          <load-on-startup>2</load-on-startup>
          </servlet>
          
          <servlet-mapping>
          <servlet-name>action</servlet-name>
          <url-pattern>*.do</url-pattern>
          </servlet-mapping>
          
          <servlet>
          <servlet-name>pdf</servlet-name>
          <servlet-class>com.abbott.gprd.servlets.PdfServlet</servlet-class>
          </servlet>
          
          <servlet-mapping>
          <servlet-name>pdf</servlet-name>
          <url-pattern>/pdf</url-pattern>
          </servlet-mapping>
          
          <mime-mapping>
          <extension>mol</extension>
          <mime-type>chemical/x-mdl-molfile</mime-type>
          </mime-mapping>
          
          <welcome-file-list>
          <welcome-file>index.jsp</welcome-file>
          </welcome-file-list>
          
          <taglib>
          <taglib-uri>/WEB-INF/app.tld</taglib-uri>
          <taglib-location>/WEB-INF/app.tld</taglib-location>
          </taglib>
          
          <taglib>
          <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
          </taglib>
          <taglib>
          <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
          </taglib>
          <taglib>
          <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
          <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
          </taglib>
          <taglib>
          <taglib-uri>/WEB-INF/nmr.tld</taglib-uri>
          <taglib-location>/WEB-INF/nmr.tld</taglib-location>
          </taglib>
          </web-app>


hmm
          it all looks ok to me
          what happens if you try to access an image or something in your war (ie
          something not java related)
          also - i have seen on some machines that localhost doesnt work but 127.0.0.1
          does work
          your app should be trying to access index.jsp which should be in the root
          directory of your war
          does index.jsp exist and is it in the root directory of your war?
          lastly - i noticed you have a startup servlet. Put a system.out in the init
          method of the servlet. If the servlet is being deployed OK then you should
          see some output in the console
          "Ravi" <[email protected]> wrote in message
          news:[email protected]...
          > I am specifying the same http://localhost:7001/screen and it still
          > gives the same error.
          >
          > Following is part of my cofig.xml where myapp is specified.
          >
          > <CustomRealm
          >
          ConfigurationData="user.filter=(&(cn=%u)(objectclass=person));user.dn=ou
          =people,
          > o=example.com;server.principal=cn=admin,
          >
          o=example.com;membership.filter=(&(member=%M)(objectclass=groupofuniquen
          ames));group.filter=(&(cn=%g)(objectclass=groupofuniquenames));server.ho
          st=ldapserver.example.com;server.ssl=true;group.dn=ou=groups,
          > o=example.com"
          > Name="defaultLDAPRealmForNovellDirectoryServices"
          > Notes="This is provided as an example. Before enabling this
          > Realm, you must edit the configuration parameters as appropriate for
          > your environment."
          > Password="{3DES}/4XkW5rmVvBHzFtI9SRK/g=="
          > RealmClassName="weblogic.security.ldaprealmv2.LDAPRealm"/>
          > <Server ListenPort="7001" Name="myserver" NativeIOEnabled="true"
          > TransactionLogFilePrefix="config/mydomain/logs/">
          > <Log FileName="config/mydomain/logs/weblogic.log"
          > Name="myserver"/>
          > <SSL Enabled="true" ListenPort="7002" Name="myserver"
          > ServerCertificateChainFileName="config/mydomain/ca.pem"
          > ServerCertificateFileName="config/mydomain/democert.pem"
          > ServerKeyFileName="config/mydomain/demokey.pem"/>
          > <WebServer DefaultWebApp="DefaultWebApp"
          > LogFileName="./config/mydomain/logs/access.log"
          > LoggingEnabled="true" Name="myserver"/>
          > <ServerDebug Name="myserver"/>
          > <ExecuteQueue Name="default"/>
          > <KernelDebug Name="myserver"/>
          > <ServerStart Name="myserver"/>
          > </Server>
          > <Application Deployed="true" Name="screen"
          > Path=".\config\mydomain\applications">
          > <WebAppComponent Name="screen" Targets="myserver"
          > URI="screen.war"/>
          > </Application>
          > <SNMPAgent Name="mydomain"/>
          > <Realm FileRealm="wl_default_file_realm" Name="wl_default_realm"/>
          > <ApplicationManager Name="mydomain"/>
          > <JTA Name="mydomain"/>
          >
          > Thanks in advance.
          > Ravi.
          >
          >
          > "Matt Krevs" <[email protected]> wrote in message
          news:<[email protected]>...
          > > what url are you specifying?
          > >
          > > i would guess that http://localhost/screen-web would work. Hard to say
          > > without also seeing your config.xml
          > >
          > > The critical item in config.xml is the value of URI in the
          webappcomponent
          > > element for your application
          > >
          > > eg if it was
          > >
          > > <WebAppComponent Name="myapp-web" Targets="myerver" URI="myapp-web"/>
          > >
          > > then the url you would call is http://localhost/myapp-web
          > >
          > > "Ravi" <[email protected]> wrote in message
          > > news:[email protected]...
          > > > Hi everybody,
          > > > I am new to Weblogic and recently installed Weblogic6.1
          > > > on my machine and I am trying to access my application using weblogic
          > > > and it gives
          > > >
          > > > Error 404--Not Found
          > > > From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
          > > > 10.4.5 404 Not Found
          > > >
          > > > I have uploaded the WAR file of my application using the Admin
          > > > console. The WAR file is place under
          > > > \bea\wlserver6.1\config\mydomain\applications\screen.war.
          > > >
          > > > What am I doing wrong ?
          > > >
          > > > Thanks is advance.
          > > >
          > > > PS: I am also including my web.xml file
          > > >
          > > > <?xml version="1.0" encoding="ISO-8859-1"?>
          > > >
          > > > <!DOCTYPE web-app
          > > > PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
          > > > "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
          > > >
          > > > <web-app>
          > > >
          > > > <session-config>
          > > > <session-timeout>-1</session-timeout>
          > > > </session-config>
          > > >
          > > > 
          > > > <servlet>
          > > > <servlet-name>action</servlet-name>
          > > >
          <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
          > > > <init-param>
          > > > <param-name>application</param-name>
          > > > <param-value>resources.nmr.ApplicationResources</param-value>
          > > > </init-param>
          > > > <init-param>
          > > > <param-name>config</param-name>
          > > > <param-value>/WEB-INF/struts-config.xml</param-value>
          > > > </init-param>
          > > > <init-param>
          > > > <param-name>debug</param-name>
          > > > <param-value>2</param-value>
          > > > </init-param>
          > > > <init-param>
          > > > <param-name>detail</param-name>
          > > > <param-value>2</param-value>
          > > > </init-param>
          > > > <init-param>
          > > > <param-name>validate</param-name>
          > > > <param-value>true</param-value>
          > > > </init-param>
          > > > <load-on-startup>2</load-on-startup>
          > > >
          > > > </servlet>
          > > >
          > > > 
          > > > <servlet-mapping>
          > > > <servlet-name>action</servlet-name>
          > > > <url-pattern>*.do</url-pattern>
          > > > </servlet-mapping>
          > > >
          > > > 
          > > > <servlet>
          > > > <servlet-name>pdf</servlet-name>
          > > >
          <servlet-class>com.abbott.gprd.servlets.PdfServlet</servlet-class>
          > > > </servlet>
          > > >
          > > >
          > > > 
          > > > <servlet-mapping>
          > > > <servlet-name>pdf</servlet-name>
          > > > <url-pattern>/pdf</url-pattern>
          > > > </servlet-mapping>
          > > >
          > > > 
          > > > <mime-mapping>
          > > > <extension>mol</extension>
          > > > <mime-type>chemical/x-mdl-molfile</mime-type>
          > > > </mime-mapping>
          > > >
          > > >
          > > > 
          > > > <welcome-file-list>
          > > > <welcome-file>index.jsp</welcome-file>
          > > > </welcome-file-list>
          > > >
          > > > 
          > > > <taglib>
          > > > <taglib-uri>/WEB-INF/app.tld</taglib-uri>
          > > > <taglib-location>/WEB-INF/app.tld</taglib-location>
          > > > </taglib>
          > > >
          > > > 
          > > > <taglib>
          > > > <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
          > > > <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
          > > > </taglib>
          > > >
          > > > <taglib>
          > > > <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
          > > > <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
          > > > </taglib>
          > > >
          > > > <taglib>
          > > > <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
          > > > <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
          > > > </taglib>
          > > >
          > > > <taglib>
          > > > <taglib-uri>/WEB-INF/nmr.tld</taglib-uri>
          > > > <taglib-location>/WEB-INF/nmr.tld</taglib-location>
          > > > </taglib>
          > > >
          > > > </web-app>

Error 404--Not Found - while running report in 11g

Dear All ,
I have my oracle application in 10g R1. Now we are migarting that to 11g .
There is a temporary directory where we are generating report output (PDF)
we are using an alias name web_reps for this folder .
Given the AliasMatch in forms.conf and in registry given the alias name for FORMS_MAPPING .
It was working with 10g . Tried the same in 11g so that report is generating in the folder (PDF)
but while openeing the file using web.showdocument () using the alias name it is giving the below error .
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
If any body know this issue pls help .
Thanks
Jyo

Are you using apache in front of your weblogics, or just plain weblogic? Also please post the full version of your 11g installation (11.1.1.x or 11.1.2.x). If you are using no apache and the 11.1.1.x version for development (without apache) the forms servlet and the reports servlet are deployed on different weblogic instances running on a different port; meaning forms is available under e.g.
http://ias:9001/forms/frmservlet
whereas reports is available under
http://ias:9002/reports/rwservlet
but when running reports via web.show_document it assumes both are running on the same port. Also make sure your weblogic instances are up and running. So either you use apache for production (in 11.1.1.x or 11.1.2.x) or you go for 11.1.2 in development where the forms and the reports servlets are deployed on the very same port. As far as I am concerned I'd go for 11.1.2 as the production environment is nothing different from 11.1.1 and the development environment is a hell of a lot easier to install.
cheers

Alert Configuration / Alert Inbox - "404 Not Found" in PI 7.0

Similar Messages

Maybe you are looking for