Alert - fire email notif. with information specific to each individual

Hi,
I would like to know if a single alert can fire email to different users with information specific to each individual in the exeption list.
We might cosider the below mentioned exception list:
Column1 | Column2
Excpt1     | Emp_1_Email
Excpt2     | Emp_1_Email
Excpt3     | Emp_2_Email
Excpt4     | Emp_2_Email
Excpt5     | Emp_3_Email
Excpt6     | Emp_3_Email
In the above case, there are 2 exceptions against Emp_1, Emp_2 and Emp_3. I would like to know if we can develop a SINGLE alert which can fire email to Emp_1, Emp_2 and Emp_3 with exception information specifically against them. Or any other workaround???
Thanks,
Raghu

HI,
While defining the information-braodcasting settings (i.e. where you mention the report name, email ID of the recipent), there is an another option where you can put restrictions.
In your case you will have to create number of settings based on the number of users you have. For e.g.
create setting
1. where you have to create restricion on sapusername = 10 and email id of sapusername
2. where you have to create restricion on sapusername =11 and email id of this sapusername
Hope this will work, make sure to maintain email IDs in user profile of each user.
Regards,
Akshay

Similar Messages

Email notification with SP 10

Hi all,
We are using Solution Manager 7.1 SP 10 and would like to use the "new" email notification with the new standard actions. Nevertheless, it seems that is doesn't work.
Based on what we read, we should not need to create anything anymore as described here Pep Up Your ChaRM - Part 1: HowTo Create a Smart e-Mail Action as we have now 2 actions already created in standard :
But when we try the SEND_MAIL_CHANGE_MANAGER one with the following action definition :
with schedule condition :
and start condition :
SCOT / SO16 / BP are properly configured based on the following thread ChaRM: Approval Settings - Email Functionality in Change Request
No email are triggered when for instance the status is in "validation". Are we missing something ?
Thank you in advance.
Kind Regards.

Hi Vivek,
Thanks for the answer.
Of course, I have the corresponding YMCR actions created.
As it is "scheduled automatically", don't I have some kind of WF or jobs to plan ?
I assume that is not activated by default once you are in SP 10, isn't it ?
Based on the TJ30 table, my manager should received an email once the RfC is on "To be approved" or "Being implemented" status....which is not the case today...
As I am using the same user for testing the flow, I am wondering if it doesn't come from that but I doubt it.
And again, I wonder if there is not configuration to activate for these 2 actions, don't you think ?
Thank you in advance for your answer.

Is there a site-wide title tag that I can edit or are the title tags specific to each individual page?

Is there a site-wide title tag that I can edit or are the title tags specific to each individual page? I'm working on my title tags for Destination West at http://xibuhaohua.com and as you can see, it is in Chinese here as 西部豪华 but it's English here at Destination West. So, I'd like to know if I can edit each separately because I think they should be in different languages.

You can set the title for each page in the Page Properties dialog.
Note that on a master page, you can set a page title prefix or suffix if you'd like all your pages using that master to share a title prefix or suffix.

Email Notification - Log Information

On the Actiontec router you can setup remote email notification for issues with the router. I have done this but still get no notifications. Has anyone gotten this to operate properly?
Thanks,
Steve

What email system ? What database version ?
I don't have a Windows script to do this, but this is very similar to alert log monitoring scripts and you will learn a lot from writing it yourself. Break the job down into parts to make it easier.
1. work out how to extract errors from the log (On unix I would use grep)
2. work out how to send an email from Windows (On unix I would use "mail")
3. put the two parts together and test them.
4. add the script to the scheduled job that runs the export.
The following will give some starting points which may be helpful :-
http://www.dba-oracle.com/t_windows_alert_log_script.htm
monitor the Oracle alert log for error messages and send those messages to
http://www.dbasupport.com/oracle/ora9i/alert_log2.shtml

Email Notification with date field

Hi,
i marked the a field as Display field this way it is displayed in the Email notification. (%Records%).
But i can see the letral date field displayed in email as 2010:03:09:00:00:00:000
Why is the ''00:00:00:000'' displayed when i have a date field??
Did anyone face this issue..
KR
John

HI John,
Date field in MDM is 18 characters long and has date as well as time component to it.
You can use assignment to trim this and transfer its value to another field and make that field as DF,so that it is displayed in the mail as date.
Otherwise you can also create a calculated field for this purpose.
Please go through this very useful link to create expressions/validations with dates:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b025fab3-b3e9-2910-d999-a27b7a075a16?quicklink=index&overridelayout=true
Thanks,
Ravi

Email notification with PDF or completed form?

Is it possible for the email notification to carry a copy of the completed pdf form or excel s/s with the results.

To Adobe Mods: I second the request to have the completed form attached to an email notification as PDF. Cuts out having to log in and manually covert & download PDFs for each response individually. (Properly formatted copies of all responses required for my purposes.)

OIM 11g - Email Notification with direct link to Approval Task Details

Hi,
We wanted to send email notifications to approver with direct link to the approval task details screen from which the user can either approve or reject the request. In OIM 11g OOTB Notification templates such as Request Creation contains the direct link to Request Detail screen which is something like
http://localhost:14000/oim/faces/pages/Self.jspx?OP_TYPE=LOOKUP;E_TYPE=MY_REQUEST&T_ID=65
Wondering if there is something similar for Approval Task Details screen as well.
Any kind of help or suggestion is greatly appreciated.
Thanks,
Deepa

If at all you cannot get the direct link for approve/reject then try the actionable email from SOA. Once you have that configured the emails gets approver/reject links so that approvers can directly approve/reject the task from email. If that works for you then you can look at the format of those links in the email and deduce what you need the url as.
HTH,
BB

Email Notifications with Record Management

Hi,
is it possible to get an Email notification when items in document library are Declared as Records or UnDeclared ?
Regards
Durga

Hi,
According to your description, you want to get email alert when the document is declared as a record or undeclared.
It could be achieved using “Alert” function on the item of the library.
You can email to someone when item has any changes.
Refer:
http://www.quercussolutions.com/blog/index.php/using-sharepoint-2010-item-and-document-alerts/
https://www.youtube.com/watch?v=2B9LeG0gDTA
Feel free to reply if there are still any questions.
Best regards
Patrick Liang
TechNet Community Support

Email Notification with no Email??!

Hi and Tnxs for reading.
On my iOS devices, iPhone and iPad, I got an email notification which is staying there although there is nothing in the incoming folder.
It never happen before. I have the red circle with a marked "1" inside and, the same number shown on the email counter in the email index. However, when selecting the incoming mail folder, it is empty. This is happening on both my iOS devices. I tried to access my yahoo mail via web and no mail are pending.
I tried to disconnect yahoo account from my iOS devices (issue fixed, disappeared), but the notification come back when I reactivate the account.
Any advice please?
Tnxs, cheers.

try this:
1. In settings turn off the offending mail account
2. Power down phone
3. Turn phone back on
4. Turn the email account back on in settings

How to send email notification with the help of OID

I have a query,is there a way to send email notification (something like password change) to users from OID(Oracle Internet Directory)?
Regards,
Arun K M

Macs newer than 10.7's release just need to boot with the 'D' key.
Otherwise you need to find the original installer disk of the Mac, or call AppleCare for it to be able to run the hardware diagnostic.

How do I send a email notification with PL/SQL to Check for Columns

I want to be able to use PL/SQL to check my columns and makes sure that all required columns were populated, and if any were not populated to send an email notification.
Thanks
Hank

I would still suggest that adding appropriate constraints (well, logical constraints) to the table is the right way to go.
When you get the file back, you load the data into the table. If the constraint is satisfied, the data is loaded. If the constraint is violated, the loader gets an error, writes the affected data to another table, to another file, etc. That way, the data in the database is always correct and you have a log of the rows that were bad.
create table t( status varchar2(10), cost number );
create or replace trigger trg_t
before insert or update
on t
for each row
begin
   if :new.status = 'Approved' and :new.cost is null
   then
     raise_application_error( -20001, 'Cost must not be null if status is approved' );
   end if;
end;
SCOTT @ hp92 Local> insert into t values( 'Reject', 1 );
1 row created.
SCOTT @ hp92 Local> insert into t values( 'reject', null );
1 row created.
SCOTT @ hp92 Local> insert into t values( 'Approved', 2 );
1 row created.
SCOTT @ hp92 Local> insert into t values( 'Approved', null );
insert into t values( 'Approved', null )
ERROR at line 1:
ORA-20001: Cost must not be null if status is approved
ORA-06512: at "SCOTT.TRG_T", line 4
ORA-04088: error during execution of trigger 'SCOTT.TRG_T'If you don't want to touch the loader, you can rename the table, create a view with the same name, and use an INSTEAD OF trigger on the view to populate the real table or a reject table.
Either way, you're better off, in general, rejecting invalid records than trying to expend a lot of effort reporting on them.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Sending an email to all addresses listed for each individual in a group

I have a need to send multiple messages to multiple addresses for each individual in an Address Book group for emergency notification purposes to insure immediate attention of fathers and mothers of children with the messages sent to home, plus work and cell of both parents etc..
Can this be done in Mail using Address Book groups. As far as I can tell you can only set a single default address for each individual.
does anybody know of a possible work around?
Thanks in advance for any help. Bob

Slippers wrote:
Another suggestion is to have multiple groups which feed a "master" group. For example, Jane Doe has two email addresses (home and office) which I need to use in a single email message.
I create a master group calling it "Soccer". For the Distribution List, I use Jane's home email for Group 1 and Jane's work email for Group 2. I then drag and drop Group 1 and Group 2 into the "Soccer" group.
This isn't perfect, but it doesn't require you to have duplicate contacts.
Hope this helps someone.
very ingeneous!

OIM - Email notification to a specific user based on a dynamic rule

Hello, After creation of account in a particular target resource I need to send an email to a specific user based on the location of the user (e.g area admin).
In the notification tab of process tasks, I see only "Assignee", "Requestor", "User", "User Manager"? How can I achive the above specified requirement?
Before posting this question, I tried to search the forum for any previous posts related to this. But I couldn't find any. May be I was not searching with right key words.
Any help is appreciated. Thanks in advance.

You'll need to custom code an adapter to send the email, then you can send to any user you want. Create a new task and trigger it off the completion response code. You can use the following apis:
tcEmailNotificationUtil sendMail = new tcEmailNotificationUtil(ioDatabase);
sendMail.setBody("Type your body here or use a string variable");
sendMail.setSubject("Type your subject here or use a string variable");
sendMail.setFromAddress("[email protected]");
sendMail.sendEmail("[email protected]");
Just populate the above pieces with the information needed.
-Kevin

HTML formatted Email notification with embedded images

I am using Oracle BPM 6.5 (Studio) and been spending my wheels on trying to send out an email from a process with formatting. I am able to send emails in plain text. I get a parseexception whenever I try to set the content type property of MAil object. Not sure what might be going on. Here is the sample code.
reminderEmail as Mail
reminderEmail = Mail()
reminderEmail.from="[email protected]"
reminderEmail.recipient="[email protected]"
reminderEmail.subject="Review xx Information"
reminderEmail.contentType = "Content-Type: text/html; charset=utf-8" (IT WORKS WITHOUT THIS LINE)
reminderEmail.message = "<HTML><h2>Please check and resend the message</h2></HTML>"
send reminderEmail
It would be great if I can get a sample to send out HTML formatted emails. I know it should work because the automatic notification mail that is sent out by the engine is HTML. This is the one where it says "The instance can be accessed "here""
Thanks so much

If you want to send the html page and have it
reference the images and css files on your web
site, that's pretty easy. Just create a message
with text/html content that is your html page.
If you want to include all the images and css files
in your message along with the html page, you'll
need to create a multipart/related message and
you'll need to change all the html to reference the
images and css files using "cid:" references.

Send email-notifications with CC-header

We have some EM-administrators with two email adresses:
-the first is a normal address for a long format e-mail messages;
-the second is common address of SMS-gate SW (!! mail need to be parsed for getting it "TO", "SUBJ" and "BODY" headers !! ).
We need to make EM to put the the first address as "TO"-header and second e-mail addres as "CC"-header, respectively.

Yes, are correct - but as I mentioned before: there is no "cc"-functionality in GridControl...
If you have the choice to specify additional e-mail addresses maybe you could implement your special logic (SMS-gate SW => !! mail need to be parsed for getting it "TO", "SUBJ" and "BODY" headers !! ) in the e-mail server itself...
Or if you have the availability to send the e-mails of the notifications to the monitored host itself, you could "process" those e-mails and send them
afterwards to the cc-recipients...

Alert - fire email notif. with information specific to each individual

Similar Messages

Maybe you are looking for