Alert in integration process

Hi,
is it possible to use alert-monitoring in the integration process?
Does anybody know if there exist a blog of this theme?
Thanks.
Regards.
Stefan

Hi Stefan,
Can you refresh the Cache and check it out.
Cache notification status
a)Start the Integration Repository.
b)Select Environment ® Cache notification.
c)Have a look at the entries for the relevant user and date.
d)Have a look at the entries for the relevant cache instance, user and date.
Cache update
a)Start transaction SXI_CACHE.
b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
c)Call transaction SM58 to check the status of the refresh process.
Regards
Agasthuri Doss

Similar Messages

Alerts in Integration Process (BPM)?

We are just beginning to use Alerts in PI 7.1. If an error occurs in an integration process (BPM), will it trigger an alert if the Alert Rule is defined wide open? Or do you actually have to trigger the alert in the integration process with an additionl step to trigger the alert?

The Alert has to be defined in ALRTCATDEF.....no matter where the alert comes from (IE, AE, BPE)
If an error occurs in BPM and you have not mainatined proper exception handling for it then....and if the processing shows in red in SXMB_MONI then the alert will be raised as IE alert
However if you have implemented exception handling for a step and then in that exception branch you raise an alert then your BPM will raise alert....the subject of your alert email will be Process <ProcessID>
BPM related alert can be either with static text (using Alert Container Variables) or Dynamic text (using some value from payload)
Please note that to raise an alert from BPM it is not compulsory to only raise it as a Dynamic Alert......static alert can also be raised.
The documents which are available for lower releases are still applicable in alert creation.....so existing blogs/ docs should work
Regards,
Abhishek.

Integration Process exception handling & alerts, Java

Hello,
I would like to enhance my basic scenarios fool proof and with as much Java as possible.
I have set up several asynchronous and synchronous File to SOAP transfers between systems A and B
using PI70 including my own Java mapping classes and PI's AF_Modules beans. They work just fine.
I have not designed my own Integration Processes yet, so execution is based on channel settings and availability timing.
I have learned this aproach may be exposed to general faults resulting manual monitoring and repairing.
For example server problems at receiver side can result data losses as sender channel just keeps removing source
files like normally, as the process would be better to just stop right there and alert or something.
My question is, is the "Enterprise services Builders" Integration Process & Graphical definition screen the one and only tool to
customize whole process exception handling and alerts in PI, and Java is not an option?
Appreciate your advice on this.
Kind regards m

Hi m,
Strange Name
>>I have learned this aproach may be exposed to general faults resulting manual monitoring and repairing. For example server problems at receiver side can result data losses as sender channel just keeps removing source files like normally, as the process would be better to just stop right there and alert or something.
If you are looking to handle this particular scenario, then we have the alert mechanism and CCMS monitoring. There you will come to know whether the end system down or not.
Also in addition to this you can write your own java (in message mapping, as modules, java mapping) /abap code (as abap mapping, user exit in standard functions etc) for providing more details in error scenarios. But you need to validate whether the maintenance/development cost for the code is justified in your scenarios
Regards
Suraj

Could not invoke a web service in an integration process from a portal

Hello,
I am a WebLogic user. I am using WebLogic 8.1. I created a process project which integration a few web services. The last service in the process is named "Alert Service". I also create a WebLogic portal to invoke the the Alert service in the process. After I run the process in WebLogic workshop, I run the portal. I met the issue like:
An error has occurred:
An exception occurred in the action showAlert
EJB Exception: ; nested exception is:
com.bea.control.ServiceControlException: SERVICE FAULT:
Code:java.io.FileNotFoundException
String:Response: '503: Service Unavailable' for url: 'http://dbaldridge3000:7001/JC2Collab/JC2/collab/alert/Alert.jws'
Detail:
END SERVICE FAULT
caused by: : com.bea.control.ServiceControlException: SERVICE FAULT:
Code:java.io.FileNotFoundException
String:Response: '503: Service Unavailable' for url: 'http://dbaldridge3000:7001/JC2Collab/JC2/collab/alert/Alert.jws'
Detail:
END SERVICE FAULT
I created a portal domain and extended the workshop and integration domain to the portal domain server. both the process and the portal are running on this server. If I don't run the workflow process, but run the Alert service only and then run the portal, there is no exception.
The portal was created using the Alert service's control.
Why did the integration process hide its service so that the portal could not find it ? Should I run the integration process and the portal in separate domains (servers) ? Should I start two WebLogic platforms ?
Thanks in advance.
Di

I reproduced this error in another way by using portal only. I created a portal with a portlet which can invoke a meeting service. I posted two methods in the meeting service to the portlet - listMeetings and getMeeting. The portlet was generated automically from the meeting web service control. I invoked the listMeeting from the portal at first. The meeting info was displayed on the portal page. Then I invoked the getMeeting by entering a meeting key got from the first step. For the second call, the same exception was thrown.

Capturing of Message ID in Integration process

Hello,
I have a scenario where my a file is picked from FTP server and passed to Integration process. Here if there is any failure in IP then i am throwing alert. Here i am preparing dynamic text in alert message. But my problem here is i am not able to catpture Message ID whereas i am able to capture all standard variables like SenderParty and etc.
Please help me in this regard,
Thanks,
Vijay Kumar T.

Hi,
I have implemented the same. I have used container variables and used it in the Title of my AlertMessage.Store the Message Id after the receive step of BPM. Pass this value to the Function that triggers the Alert from Transformation step. We have a RFC SCREATE_ALERT that is used to set container values.
With Dynamic Text, i feel it always gives the processId.You can have MessageId in Alert Long text.Store the MessageID in a container element of BPM and use it in the control step message text : &message_id&. Dont forget to check the Dynamic Text in the properties of ur AlertCategory.
Hope this gives u an idea.
Ref this link for the possible container variables
http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
SXMS_MSG_GUID - SXMSMGUIDC - Message ID

Sending Email from Integration Process

I have an Integration Process created which looks at outbound messages and sends information to my alert inbox under certain conditions. Is it possible to take the text I am sending to the Alert Inbox and have this email me also, or does this process need to generate a new message which is routed through the email adapter?
Regards

Then Configure a Mail receiver adapter with the SMTP/IMAP address of your mail server and user authentcation and provide the recipient name in the TO address.
Check the HOW TO guides for MAIL adapter in Service market place for configuration details.
Best practice is to have a standard mail box configured on ur the Mail server to manage all sent mails.
oops missed out the stuff on CCBPM, Just add...a send step pointing to Mail service after the exception is trapped and Alert raised.

What is integration scenario & integration process in IR?

hi friends
1). can any one explain me about Integration scenario and Integration processes in "INTEGRATION REPOSITORY"?
2). why we need to use this IS & IP(integration scenario and integration processes?
3). what is advantage of using IS & IP(integration scenario and integration processes?
if you have any related links and documents please refer to me..................
Thanks in Advance
chinthapatla.bharat

Hi Bharat,
Integration Scenario
An integration scenario completely models the exchange of
messages for a collaborative process and provides an overview of the process flow.
It is overview of your whole integration scenario. In Integration Scenario each Swimlane represents a different business system. Mean you will have number of swimlanes as number of business system involved in your integration. Swimlane contains action. Actions are used for mentioning Inbound and outbound interfaces for the corresponding swimlane(business system).
Why we are using Integration Scenario?
We use integration scenario to genearate Integration Directory objects like Receiver Determination, Interface determination, Sender agreeement etc.
All XI content objects must be assigned to one or more integration scenarios (IS). Delivering XI-Content in the framework of an IS has the following advantages:
1. The IS provides you with a central point of access for all integration objects. This is necessary for semantic and technical integration and facilitates business-driven development.
2. The IS helps customers to understand the underlying business scenario of XI content objects.
3. The IS serves as a kick-start for the configuration of the content at the customer site. The aim is to minimize the configuration effort for the customer.
Please go through this link for further reference:
http://help.sap.com/saphelp_nw04/helpdata/en/88/7adb7a030b424b8ef29b99461e52a8/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ec/21ee117a909f44a8b69794b9ed6221/frameset.htm
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
How Tou2026 Implement a High Volume Process Integration Scenario
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9056c89c-1a2e-2a10-8a99-eae154e74c4e
Integration Processes
An integration process is an executable, cross-system process for processing messages. In an integration process you define all the process steps that are to be executed and the parameters relevant for controlling the process.
You implement integration processes when you want to define, control, and monitor complex integration processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM).
the following case,u should consider to use integration process.
1.Control/Monitor the messages in XI
2. Collect/Merge the messages in XI
3. Split the messages in XI
4. To Multicast an Message
5. Send an Alert based on the very complex business logic
6. To integrate with cross component business process
Please go through this link for further reference:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f7/d4653fd1d3b81ae10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
Some more additional links:
1. what is integration processes and integration scenario? and the functionality of these??
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
/people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
http://help.sap.com/saphelp_nw70/helpdata/en/ae/fb72dc1d0fbf4391fba23b7e8a0d55/frameset.htm
2. what is Actions?
An action represents a function within an application component that is not subdivided further. Actions subdivide the process flow of an integration scenario.
The vertical progression of actions from top to bottom corresponds to the logical process flow.
http://help.sap.com/saphelp_nw70/helpdata/en/ae/fb72dc1d0fbf4391fba23b7e8a0d55/frameset.htm
3. What is message interfaces in interface objects of IR?
http://help.sap.com/saphelp_nw70/helpdata/en/ae/fb72dc1d0fbf4391fba23b7e8a0d55/frameset.htm
4.what is fault message types exactly and functionality?
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
Regards,
Vinod.

Errorhandling in integration process

Hi,
is there any blog that describes how I can create an errorhandling in the integration process.
I have created I block with exception branch.
My problem is that I do not know how I could catch all message mapping error in the exception branch.
Can anybody help me please?
Thanks
Regards
Stefan

Stefan,
My problem is that I do not know how I could catch all message mapping error in the exception branch.
Once an error occurs in the TRANSFORMATION step inside the Block, your control will go to the EXCEPTION handler block.
Now, inside this Exception Handler block , you can create any step inside this Esception Handler block depending on the business Requirements.
You can trigger alerts , etc.
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Regards,
Bhavesh

Difference between Monitoring Process and Integration Process

What is the difference between the Monitoring Process object for BAM and Integration Process object? Both seem to have exactly the same design environment in the Enterprise Services Builder.
Is it so that Monitoring Process alarms only appear in the UWL of the specified user?
Also, suppose I am wanting to create a receive step to wait for the arrival of a message instead of an event (say I want to check a specific message arrives before a certain time, correlating several fields of the message, which is something I cannot do I believe with alert monitoring). Am I able to do this? I cannot see a reason why not, but I'd like confirmation.
BR,
Tony.

Hi,
Thanks for the link! I read through the replies, but it still leaves a couple of basic questions unsolved:
1) Why did SAP discriminate these two types of PI objects at design time - the Monitoring Process and the Integration Process?
2) new capabilities of PI 7.1 are touted as:
Event provisioning and consumption for BAM:
- Local container
- Subscription and handling of business process events
- Milestone Monitoring
So can I only employ event provisioning, subscription of Business process Events and Milestome monioring with a Monitoring process, or can I do that with an Integration Process as well?
BR,
Tony.

[BPM] Standards to design integration processes

Hey,
I would like to create a paper as guideline for creation of further integration processes. The
last project has been end up in a chaos without a possibility of enhancement or maintenance.
Therefore I started with a naming convention and a paradigm of designing SWC.
Now I would like to give some hints about how a good bpm design looks like. Does someone
have some information about that.
I have:
- when a bpm is unavoidable (splitting, alerting..)
- when a bpm is not necessary (multi-mapping...)
- which bpm step needs lot resources (recveive/send steps, transformation...)
Do you have some hints for modular designing of bpm? For example to put error
handling in an own bpm (for reuseability) or something else?
How do you design BPMs to keep them small and clear?
thanks
chris

BPM is used to implement work-flow spanning across multiple application system against embedding the parts of work-flow in application system. Apart from this it also help achive other scenarios like, bridging synch and asynch systems, alert mechanism, multi mapping etc. Check the BPM overview document in SDN download section.
Check out the use cases discussed at http://help.sap.com/saphelp_nw04s/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
BPM is mainly used in senarios where extra functionalities are to be done with the source message which cannot be done using the normal mapping and user-defined functions, like
->Collecting of messages till a certain count or for a specific criteria.
->Merging messages
->Spliting messages
->Processing of error files and sending to specific location and sending alerts.
->Parallel processing of two criterias at the same time can also be done using BPM.
Also go through these links,
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
I hope it helps....
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

How to Cancel the integration process(ccBPM) after a specifice period

Dear Experts,
I have a ccBPM(integration process) having two receive steps using one correlation,
1. First receive step receives the Delivery IDOC
2. Second receive step receives the Invoice IDOC of the corrospondng delivery of the first receive step using the correlation.
This works perfect when both the documents comes to XI.
Problem is if the delivery comes and invoice dosen't come for some reasons then process is active and waiting indefinately. We want to cancel the integration process if the invoice IDOC is not received in 48 hours.
Please guide how to achive this in ccBPM.
We are working on PI7.0
thanks and regards,
Ravi Siddam

HI,
you can use block step and cancel process after a particular time(48 hours in your case)....
control step has 3 operations.......throw exception,raise alert and cancel process..
Thanks,
Madhu
Edited by: Madhu sudhan Reddy on Jul 31, 2008 8:18 AM

Multiple Queue Assignment for Integration Process - PI 7.11

Hi,
I am trying to configure multiple Queues for an Integration Process.
The Integration Process is straight forward, except for a Asynchronous Request Response pattern with correlation. (A asynch send step - immediately followed by a asynchronous receive step with Correlation)
I have done the following
1) In IR set the Queue as Multiple - Content Specific
2) In SWF_INB_CONF transaction reconfigured Multiple Queues - Content Specific without buffering
But when I trigger the message, the message is not at all triggering/entering the Integration Process. The error message is BPE Internal Failure.
But if I reconfigure the IP as One Configurable Queue & "Without Buffering", it is working. But we want multiple queues assigned to this Process.
Thanks in advance.
Regards,
Sudharshan N A

Bjoern, there are blogs/wikis available which should be searched before a question is asked on forum. The information you need is quite basic one and I will therefore lock this thread.
Regards,
Prateek

On all my other apple devices my Icloud works. I have tride the hard reset idea, i have tried to delete my i clod account on he iphone, but nothing works. Why is the not an integrated process apple? How do i change my apple id and password to my new

Why is the update on Icloud setting not an integrated process Apple desingners! On my apple iphone 5, after new ipdate. My icloud on my iphone askes to back up. It still have my old id an password and I cant change it anywhere. I dont have that email account for a year now , and dont have the password of it. All my other devices shows my new apple Id and password. I cant change it at mannege my apple Id because it is the new one. Itune use the new one, but no, not my iphone. So, what do I do now?

You have to do the following to get your new Apple/iCloud ID signed onto your device:
1.     Go to Manage your Apple ID and change your Apple ID back to the old email address (do not verify it - this is temporary):
Apple - My Apple ID
2.     Go to Settings>iCloud, scroll to the bottom and Delete the iCloud account. Use your current Apple ID password when asked. Follow the prompts to delete the account
3.     Go back into Manage your Apple ID and change your Apple ID back to your new email address (you may need to verify it again)
4.     Go back to Settings>iCloud and sign onto iCloud with your new Apple ID. Turn on the options you want sync'd with iCloud, give it a little time to push the info down to your device.
Cheers,
GB

How to trigger an integration process at a certain time each night.

I have an integration process to collect messages that I would like to trigger at a specific time each night. I looked at the Wait step in order to do this, but it looks like you can specify a fixed time, or a repeating time.
If I used 'Wait until Specified time', I could specify the time, but the date is a problem; I cannot fix it as a certain date because it will only work for that date only.
If I take the date from a field of the message, I'm not sure what will happen since it looks as if the date would be updated each time a message is received to the collective process.
I could take the date from the first message, and store it as a variable, then use that in the wait step, but since the date is not in the correct format, I would need to use xpath somehow to do that.
Alternatively I was thinking about using a wait for event step, and raising the event from a background job, but this only seems to be available in ABAP Workflow directly, not from the Integration Process Editor. Is it permissable to modify the generated ABAP Workflow and add a Wait for Event step to allow this to happen?
Does anybody have an opinion on the best way to proceed?

Hi,
Check these
Polling based upon availability
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
REgards
Seshagiri

Return-Code 99 of integration-process in TR SXI_CACHE

Hallo,
in TR SXI_CACHE my integration-process has the return-code 99 (process cannot be activated). On selecting in the tree (left side) and dobble-click of my process following comes up:
</properties>
- <lines>
<line id="208" predid="207" succid="5" parentid="207" order="0" linetype="DEFAULT" />
<line id="213" predid="7" succid="13" parentid="207" order="0" linetype="DEFAULT" />
<line id="214" predid="13" succid="9" parentid="207" order="0" linetype="DEFAULT" />
<line id="215" predid="9" succid="59" parentid="207" order="0" linetype="DEFAULT" />
<line id="217" predid="59" succid="97" parentid="207" order="0" linetype="DEFAULT" />
<line id="219" predid="97" succid="89" parentid="207" order="0" linetype="DEFAULT" />
<line id="220" predid="89" succid="21" parentid="207" order="0" linetype="DEFAULT" />
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
End tag 'prperty' does not match the start tag 'property'. Error processing resource 'file:///C:/W2KMF/Profiles/schmitf/Loc...
<property id="59" guid="d56d20d4195e11daafd60003ba0ff8f5" name="SendMsgSyncResponse" counter="0" type="EXPR" valueType=""...
n-left:1em;text-indent:-2em"> <line id="222" predid="21" succid="23" parentid="207" order="0" linetype="DEFAULT" />
<line id="224" predid="23" succid="25" parentid="207" order="0" linetype="DEFAULT" />
After activating the process once more the detail-information comes up. Then i see the error steps (Message-Type = E). So for example:
Der Wert des Ausdrucks '&CH_EVENT_TAB_DATA.PAYLOAD.ERROR&' kann nicht als Quelle einer Zuweisung dienen (expression cannot be the source of an assignment)
But in the integration-process this seam to be good. What can i do? Delete the container-element and create a new one?
Thanks in advance,
Frank

Hallo,
when i have a look at the details after acitvation my integration-process (with returncode 99) I make changes in my process. But after refresh there are the old items are still there. What´s about the Button "delete runtime Version" in the acivation step? Can i so delete this process in my cash? Have i to make a new integraion-process-object? After copy one process and giving a new name the same problems occures? What is the best solution?
Thanks,
Frank

Alert in integration process

Similar Messages

Maybe you are looking for