Alert issue in oracle EBS

Hi,
I have a test instance with EBS:12.0.6,Oracle DB :10.2.0.4 and RHEL:4
I am facing a alert issue in Purchasing as follows:
It throws following error: APP-FND- 01874:Please link in Oracle Alert program library.
I had a metalink id 211089.1 addressing the same error but it is for 11.5.10.2 EBS
Please help with to resolve this issue at the earliest.
Regards,
Milan Rathod

How do you get the error?
Can you find any errors in the workflow log file?
The steps in the doc should be applicable (except for the last step), so you may try the same solution and check then.
Thanks,
Hussein

Similar Messages

Performance Issue in Oracle EBS

Hi Group,
I am working in a performance issue at customer site, let me explain the behaviour.
There is one node for the database and other for the application.
Application server is running all the services.
EBS version is 12.1.3 and database version is: 11.1.0.7 with AIX both servers..
Customer has added memory to both servers (database and application) initially they had 32 Gbytes, now they have 128 Gbytes.
Today, I have increased memory parameters for the database and also I have increased JVM's proceesses from 1 to 2 for Forms and OAcore, both JVM's are 1024M.
The behaviour is when users are navigating inside of the form, and they push the down button quickly the form gets thinking (reloading and waiting 1 or 2 minutes to response), it is no particular for a specific form, it is just happening in several forms.
Gathering statistics job is scheduled every weekend, I am not sure what can be the problem, I have collected a trace of the form and uploaded it to Oracle Support with no success or advice.
I have just send a ping command and the reponse time between servers is below to 5 ms.
I have several activities in mind like:
- OATM conversion.
- ASM implementation.
- Upgrade to 11.2.0.4.
Has anybody had this behaviour?, any advice about this problem will be really appreciated.
Thanks in advance.
Kind regards,
Francisco Mtz.

Hi Bashar, thank you very much for your quick response.
If both servers are on the same network then the ping should not exceed 2 ms.
If I remember, I did a ping last Wednesday, and there were some peaks over 5 ms.
Have you checked the network performance between the clients and the application server?
Also, I did a ping from the PC to the application and database, and it was responding in less than 1 ms.
What is the status of the CPU usage on both servers?
There aren't overhead in the CPU side, I tested it (scrolling getting frozen) with no users in the application.
Did this happen after you performed the hardware upgrade?
Yes, it happened after changing some memory parameters in the JVM and the database.
Oracle has suggested to apply the latest Forms patches according to this Note: Doc ID 437878.1
Thanks in advance.
Kind regards,
Francisco Mtz.

Integrating with Oracle EBS using XMLGateway issues

Hi all,
I'm trying to integrating with Oracle EBS using XMLGateway, and I meet some issues. Here are the steps I did.
1) Update DATA_MAP.xgm file and DATA_TEST.dtd file into XMLGateway repository
2) Define transactions in EBS client:
Party Type: Supplier
Transaction Type: Cat
Transaction Subtype: Dog
Transaction Description: test for cat and dog
Standard Code: OAG
External Transaction Direction: IN
External Transaction Type: Cat
External Transaction Subtype: Dog
Queue: APPLSYS.ECX_IN_OAG_Q
3) Define trading partners in EBS client
Operating Unit: Vision Operations
Trading Partener Type: Supplier
Trading Partener name: ****
Trading Partener site: ****
Company Admin email: [email protected]
... other transaction info defined in step 2)
4) Send inbound message using OTA send Inbound Page. It succeed.
a. The return page display status code 1000 with status discription OK.
b. From the transaction monitor, I can see the inbound message was processed successfully.
c. From the database, I can see that this inbound message first arrived in ecx_inqueue table, and then moved to ecx_in_oag_q_table. And last disappeared from the ecx_in_oag_q_table. That means XMLGateway process the inbound message in transaction queue successfully.
5) Send inbound message using SOAPUi. It failed.
a. The return page display status code 200. That means the inbound message has been sent to inbound message queue successfully.
b. From transaction monitor, I cannot see this request record.
c. From the database, I can saw that this inbound message first arrived in wf_ws_jms_in table, then disappeared. It didn't moved to transaction queue which I selected when defined transations, so I guess it wasn't processed by XMLGateway. Using the following SQL, but cannot find error reason.
select * from ecx_inbound_logs where process_id='******************'
select * from apps.ecx_error_msgs where error_id='*****'
I guess the reason is something happend to prevent inbound message to move from inbound message queue to transaction queue. So XMLGateway cannot process this inbound message.
From XMLGateway user guide, I understand that there are three kinds of inbound queues(ECX_INBOUND which OTA uses, WF_WS_JMS_IN which soap over https uses, WF_JMS_IN which JMS uses), does't mention what are the corresponding transaction queues? Can they share the same transaction queue? Also see from this user guide, ecx_in_oag_q (transaction queue) is only for ecx_inbound queue. But when I try to define a transaction in EBS client, it seems that only ecx_in_oag_q can be chosen. I wondered why my second senarios failed when I used the same transation and trading partner. The message already arrived at wf_ws_jms_in and then disappeared. Is that because I selected the wrong transaction queue when defining transactions? But it was really cannot select any other transaction queues there. Or I missed some steps when using SOAP over HTTP/S?
Appreciate you can give me some suggestions. Hope to hear your voice. Thanks in advance.

Hi,
Regarding the integration what type of integration you want.
Can you please elaborate?There are some integration tools releases by Oracle for the integration.
Regards
Pramod

Oracle EBS 11i Installation issues

Dear All,
I am trying to install Oracle EBS 11i on Redhat Enterprise Linux 4.5
[oracle@machine1 /]$ cd /Stage11i/startCD/Disk1/rapidwiz/
[oracle@machine1 rapidwiz]$ ./rapidwiz
Note: i have started the installation logged as user oracle which is member of groups oinstall and dba
the installatio starts without warning but suddenly installation aborted by giving the message check the log
/u01/oracle/proddb/9.2.0/appsutil/log/PROD-macnine1/021804050.log to see the errors
when i checked the specified log file ,some errors found here described below
runProcess_6
Statusstring Executing Command: adlnkoh.sh
adlnkoh.sh started at Mon Feb 18 18:32:18 UZT 2008
logfile located in /u01/oracle/proddb/9.2.0/install/make.log
Error while running adlnkoh.sh. Please check logfile
Errors while running adlnkoh.sh
There was an error while running the command -
/u01/oracle/proddb/9.2.0/temp/PROD_machine1/adrun9i.sh APPS APPS
/u01/oracle/proddb/9.2.0/appsutil/install/adlnkoh.sh: line 198:
/u01/oracle/proddb/9.2.0/bin/sqlplus: No such file or directory
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file
for details.
and when i check the log file /u01/oracle/proddb/9.2.0/install/make.log
many errors found like these
chmod 6751 /u01/oracle/proddb/9.2.0/bin/oracle
chmod: cannot access `/u01/oracle/proddb/9.2.0/bin/oracle': No such file or
directory
make: [ioracle] Error 1 (ignored)
mv /u01/oracle/proddb/9.2.0/rdbms/lib/oracle
/u01/oracle/proddb/9.2.0/bin/oraclemv: cannot stat
`/u01/oracle/proddb/9.2.0/rdbms/lib/oracle': No such file or directory
make: [ioracle] Error 1 (ignored)
chmod 6751 /u01/oracle/proddb/9.2.0/bin/oracle
chmod: cannot access `/u01/oracle/proddb/9.2.0/bin/oracle': No such file or
directory
make: [ioracle] Error 1 (ignored)
Completed...
/u01/oracle/proddb/9.2.0/bin/oracle did not relink properly.
Please review relink errors in this log file
The user Oracle (by which installation is in progress) has all privileges on base directory /u01 (used for 11i install)
Here is the permissions for both directoried Stage11i and /u01
Code: Select all
drwxr-xr-x 7 root root 4096 Feb 15 13:03 Stage11i
drwxr-xr-x 3 oracle oinstall 4096 Feb 18 17:05 u01

Now i had started the installation again and once again unable to do this
i had seen the errors while checking the logfile created during installation
Statusstring Creating the database controlfile...
adcrdb.sh started at Fri Feb 22 21:37:23 UZT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/oracle/testdb/9.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /u01/oracle/testdb/9.2.0/Apache/perl/bin:/u01/oracle/testdb/9.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/testdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/Stage11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
LD_LIBRARY_PATH : /u01/oracle/testdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/testdb/9.2.0/ctx/lib
Executable : /u01/oracle/testdb/9.2.0/bin/sqlplus
The log information will be written to
     /u01/oracle/testdb/9.2.0/appsutil/log/TEST_machine1/adcrdb_TEST.txt
Creating the control file for TEST_machine1 database ...
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Feb 22 21:37:33 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size          452204 bytes
Variable Size          402653184 bytes
Database Buffers     167772160 bytes
Redo Buffers          10629120 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
blocks
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u01/oracle/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.localdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size          452204 bytes
Variable Size          402653184 bytes
Database Buffers     167772160 bytes
Redo Buffers          10629120 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified controlfile
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 3284
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size          452204 bytes
Variable Size          402653184 bytes
Database Buffers     167772160 bytes
Redo Buffers          10629120 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000 blocks
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u01/oracle/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.localdomain"
ERROR at line 1:
ORA-01109: database not open
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
exit_code=1
Checking for errors ...
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
ORA-01507: database not mounted
ORA-01109: database not open
ORA-01109: database not open
ORA-01507: database not mounted
ORA-00205: error in identifying controlfile, check alert log for more info
ORA-00210: cannot open the specified controlfile
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 3284
ORA-06512: at line 1
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
ORA-01507: database not mounted
ORA-01109: database not open
ORA-01109: database not open
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Feb 22 21:39:16 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
Cannot create control file for TEST
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for TEST instance

Any document id for set up the alerts in oracle EBS

Hi,
Any document id for set up of alerts in oracle EBS. Or any site address for basiscs of setup of oracle alerts.

Hi,
Please see "Oracle Alert User's Guide" available at:
Applications Releases 11i and 12
http://www.oracle.com/technology/documentation/applications.html
You can also refer to:
Note: 868449.1 - How To Determine If An Environment Is Set Up With Response Processing Alerts?
Note: 396315.1 - Oracle Alert Documentation Resources, Release 12
Note: 104698.1 - Setup & Usage (Oracle Alert)
Note: 271367.1 - Oracle Alert Alert Check Setup Test
Regards,
Hussein

Error while running a customize report in oracle ebs

Hi ..
can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
XXIFMS: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Current system time is 03-JUN-2011 11:09:24
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DATE_FROM='2010/04/01 00:00:00'
P_DATE_TO='2011/06/03 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
stat_low = 9
stat_high = 0
emsg:was terminated by signal 9
ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 9
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JUN-2011 11:09:24

Please post the details of the application release, database version and OS.
Is the issue with this specific concurrent program?
Can you find any errors in the CM/OPP log files?
Please see if these docs help.
On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
Thanks,
Hussein

Getting 404 error when trying to login to Oracle EBS page

Hi,
I had installed Oracle EBS 12.0.4 last year and everything was running fine until last week. Last week, we suddenly started seeing this issue - when trying to login to the Oracle EBS page, we are getting the 404 page not found error.
I have EBS installed on 2 VMs (virtual machines) - one VM has the application server and other VM has the database server. I logged on to the aplpication server to do some debugging and noticed 2 things ->
1.The Oracle Fullfillment service was not running. I started it, it was up for some time but then it stopped on its own. This happens everytime - after successfully starting the service, it shuts down after sometime. There is nothing in the event viewer except this message "The service may have terminated abnormally, please see the log file generated by the service for more details." I checked the log file, but there is nothing significant inside the log file. Maybe I need to increase the log level. Can any one tell me how can I do that?
2. Reviver.exe was crashing intermitently on the application server. I belive reviver tries to establish the connection between the application and database server after its broken.
So I am thinking now that maybe the connection between the app server and the database server is getting broken intermittenlty and this is the root cause of all the problems.
I dont know how to verify whethe my analysis is correct or not? And it it is, how to resolved it? Is there a setting or a configuration file in which you have to specify the database server details (ip address / host name etc). Can you tell me where can I find this setting?
Or culd there be something altogether different that is causing the page not found error?
Thanks in advance,
Megha

Hussein,
The problem is partially solved - I am not getting the 404 error now. The issue was not with the netsvc file. Please see the resolution in NOTE:412980.1 (oafm,forms and oacore not starting up after IP adress change).
The OC4J services are imperative for any URL for java code. With just the Apache listener running, examples of URLS that will work are ->
http://HOST.DOMAIN:PORT/OA_MEDIA/FNDLOGOL.gif
http://HOST.DOMAIN:PORT/
Any URL for Java code will fail at this stage when OC4J services are down. For example this URL will fail: http://myHost.oracle.com:8000/OA_HTML/ServletPing.
But now, I am getting 500 Internal server error. Let me know if you kno anything about this error ->
oracle.apps.fnd.cache.CacheException at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1485) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:354) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:211) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:171) at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148) at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1259) at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1114) at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:1083) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1050) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:1037) at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:595) at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:941) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:926) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:891) at oracle.apps.fnd.common.AppsContext.<init>(AppsContext.java:751) at oracle.apps.fnd.common.WebAppsContext.<init>(WebAppsContext.java:1014) at oracle.apps.fnd.sso.Utils.getAppsContext(Utils.java:525) at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:120) at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230) at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831) at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)Caused by: oracle.apps.jtf.base.resources.FrameworkException: Error in IAS Cache: java.lang.NullPointerException: null Connection at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:712) at oracle.apps.jtf.cache.CacheManager.getInternal(CacheManager.java:4802) at oracle.apps.jtf.cache.CacheManager.get(CacheManager.java:4624) at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:216) ... 33 moreCaused by: oracle.apps.jtf.base.resources.FrameworkException:
An exception occurred in the method CacheAccess.get
null
The base exception is:
null Connection at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607) at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218) at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249) ... 37 more

Neeed for Sales Assistance issue in oracle istore

Hi All,
I have an issue on Need for sales rep assistance notification mail in oracle EBS.Mail sending to the address with out any issue.But mail does not having &QUOTEDETAILWITHTAX details.Means Product , # of Units Shippable? , Net Amount are missing.I have set required Profile option also.My mail as like below.
Quote Details:
Product # of Units Shippable? Net Amount
Sub Total:
$166.01
Shipping and Handling: $25.00
Tax (estimated): $0.00
Total: $191.01
IMPORTANT: Do not reply to this email. If you need to contact us, send
an email to [Customer Care Email Id].
Thank you again for shopping with us.
Edited by: 993255 on Mar 12, 2013 3:34 AM
What i need to do for getting product,unit of shippable,net amount?
Thanks
Edited by: 993255 on Mar 12, 2013 3:38 AM

Hi,
You will have to debug into procedure ibe_workflow_pvt.Generate_Detail
this procedure is resposible for population of &QUOTEDETAILWITHTAX .
Try executing various queries from this procedure by replacing l_quote_id with quote_header_id.
Thanks,
Hrishi

Unable to open XML report in Oracle EBS r12

Hi,
I have new installation of Oracle EBS r12 (12.1.1) on linux.
To test the XML report, I changed the output of standard report 'Active Users' from 'Text' to 'XML' and defined the data definition and template for this report.
I am unable to see the output for XML reports. The report completes without error, however I cannot open the output file.
The browser opens for fraction of a second and then closes down. My client machine is Windows 7 and I used Microsoft words 2010 to build template
I used the 5.7.201 version of BI publisher to create the rtf template.
Please help me to resolve this issue.
Thanks

I changed the output of standard report 'Active Users' from 'Text' to 'XML' and defined the data definition and template for this report.
looks like xml publisher report, so output for concurrent must be 'XML'
******* I have changed the output of concurrent program 'Active Users' from 'Text' to 'XML'
I am unable to see the output for XML reports.
how you see it?
******* I tried to open the report by clicking on 'Output' button from view request screen of EBS.
did you try after concurrent completed check 'diagnostic -> view xml'?
******* I haven't tried this. Will do now.
The report completes without error, however I cannot open the output file
what is error?
******* There is no error, the request completed successfully. When I tried to open the output file by clicking 'output' button, the browser doesn't open.
did you check OPP log?
******* There is nothing in the OPP log.
if concurrent failed so first of all check your code - data template and package (if used)
******* I used the standard EBS report 'Active Users' and just changed the output from 'Text' to 'XML' and attached the rtf template.

Oracle EBS 11.5.10.2 Installation Steps

Although this is by no means exhaustive or the most accurate, all contributions and/or corrections are welcome
As I attempt to reply the numerous calls and emails I have been getting, firstly sorry guys, I have been settling down at a new job, and haven’t had time to locate my implementation notes, however find below the steps I followed with a successful result.
Installing Oracle E-Business (EBS) Release 11i (version 11.5.10.2)
Linux Installation – SLES 9 Rel 1
•     Please follow these instructions – I could not have written a better set of instructions :
http://www.novell.com/coolsolutions/feature/16009.html
NOTE: Although this is written for SLES 9.1, I believe this will work for any Linux variant.
Also, make sure you have installed openmotif 2.0 or higher to make sure the forms server starts and remains running
Windows 2003 Server SP 1
Environment:
Windows 2003 Server was installed as an environment on VMWare Server (The free one).
Hardware Spec:
P4 800 Mhz CPU
2GB (Physical RAM) and 1GB (Virtual RAM)
250 GB (Physical HDD), 120GB (Virtual HDD)
DVD RW
DECLARE
At this point I have to say a few things:
1.     I have not attempted installing on any other version of Windows, so if you try with another version, I may not be able to answer your questions, although I believe it should not be any different.
2.     I would believe you can or have access to the internet and can download or find most of the resources needed.
3.     I would assume you have installed the Windows 2003 Server with SP 1, Internet Explorer and Outlook. Also, have included an IP address, a server name with its domain extensions in the host file.
4.     I would assume that you have created one group – dba , two users applmgr and oracle and included them in the dba and administrator groups
5.     I would assume that you are at least familiar with the terms and usage of abbreviations in this sort of environments.
6.     I would also assume you have reviewed and have made allowance to meet the required specification in terms of hardware (I did not attempt an installation on the USB HDD, so may not be able to help, if this applies to your situation)
BEGIN
     Prepare Environment
Download and have read the following software:
1.     Java Development Kit 1.3 (or higher version)
http://java.sun.com/downloads/index.html
2.     Active Perl – This is needed for the staging script adautostg.pl http://www.activestate.com/store/productdetail.aspx?prdGuid=81fbce82-6bd5-49bc-a915-08d58c2648ca
3.      Visual C++ - This is needed for many of the real-time code compilation
http://msdn.microsoft.com/vstudio/express/visualc/download/
4.      CYGWIN
http://www.cywin.com/setup.exe     (Free open source, never expires!)
OR
MKS Toolkit (Evaluation copy, 30 Trial or get a licence for about $500)
http://www.mkssoftware.com/eval/
This is necessary for certain unix-only available utilities required to implement/compile Oracle E-business Suite, such as which, make, cc, etc.
5.     The DVDs or downloaded zipped copy of the entire Oracle E-Business Suite software for Windows 32-Bit ( I did not attempt on a 64-Bit processor, though I believe it should not be different, but see the necessary documentation if that is your situation)
http://edelivery.oracle.com
6.     Jinitiator – This is required to run the forms on your system (Although a first attempt to view any of the form interfaces downloads and requests this be installed first) http://www.oracle.com/technology/software/htdocs/devlic.html?url=http://otn.oracle.com/software/products/developer/htdocs/jinit.htm
NOTE:
•     DO NOT Install into the default directories and do not allow spaces in file directories/path when installing the software, somehow experience has shown that the Oracle EBS does not handle spaces in file directories well, and results in untold hardship if ignored. E.g Default installation folder for an software installation may suggest C:\Program Files\ JDK 1.5, MAKE SURE you alter this to something like C:\JDK15. DO THIS FOR ALL SOFTWARE INSTALLED
•     After each software installation, please reboot the system before installing the next piece.
•     Make sure that all the paths to the bin folders for all software installed is included in the environment variables, and verify by typing path in the command prompt to display all paths listed
•     If using CYGWIN (like I did, as I could not afford a software expiring on me nor could afford $500 for a test). You may choose all the modules available, but you do not need all (it will be an overkill to have the entire unix utilities and libraries on your windows box, unless you plan on learning unix commands or into heavy development requiring a unix environment, without wanting a unix machine) MAKE SURE you choose all the library options, all the development options and that should be OK. Then confirm after the installation by typing which, cc (or gcc), make(gnumake), ls, gawk(awk), grep (egrep) (IMPORTANT:Where one of the other in brackets exists, copy and rename the copy as the alternative). As a double sure – copy all of these into C:\Bin directory.
•     If the Oracle EBS is downloaded, unzip all the files into the folder and ignore any suggestions that it will over-write other files such as the component.label files
Installation Proper
•     Run adautostg.pl – which you will find in the StartCD i.e the first file downloaded and unzipped. This will attempt to rearrange the installation files in the order in which the installation wizard – rapidwiz prefers and identifies the folders. (Saves you hand-holding the wizard by having to interact during the installation, pointing it to the relevant folders/files if not run) to create the staging area.
•     Run Rapidwiz – either by double clicking the rapidwiz.cmd in the startcd folder (this would be the one in the staging area) or from the command prompt
•     As required, point rapidwiz, to the bin folder of cygwin e.g C:\cygwin\bin (if this is as installed) in the place where it requires the MKS Toolkit
•     Pre-installation Checks – rapidwiz intelligently tests all the necessary software and requirements before installation starts. A corresponding message to each parameter suggests the opinion of the rapidwiz whilst a green tick indicates the parameter is sufficient, other indicators may need reviewing. Please make sure you resolve each issue before progressing with the installation. This may lead to a waste of time if not resolved.
•     Choose a single-node installation
(if just testing or practicing, you may also choose a multi-node if this is what you want.)
•     If all the modules are not needed (I installed all), you may have to choose which modules you require, and state where you want the modules installed.
•     Assuming all parameters are passed and installation begins, the different stages of the installation steps can be followed by the on-screen messages or log file reviews (each logfile directory will be displayed on the screen during the installation of each context).
•     Post Installation Checks – Rapidwiz does some checks after an installation, whether successful or not, and provides a report. When an installation is successful. It confirms and provides the url to login. The default username and password for the system administrator is usually sysadmin / sysadmin. You are encouraged to create another user immediately.
For all who asked, depending on how far up your hardware scales in terms of specifications, the installation may take about 3 hours (at least mine did) or more.
Login on to Oracle EBS !
The URL required for logging on to the OAM (Oracle Application Management - For the Apps DBAs) and OEBS (Oracle E-Business Suite - essentially for the Functional Implemeters/Consultants ) - The entire gamut (They are shown as hyperlinks), should be as follows;
http://hostname(servername.domainname.com):8000/
where hostname is the same as specified in your host file e.g servername.domainname.com or .whatever-u-like
and
8000 - is the default port, but you may have chosen your own port and that should be used in such a case.
N.B - The Forms server is often started when an attempt is made to access such an interface after login in to the OEBS. However, in my own case, it did not until I made sure openmotif 2.1 was installed on my SuSE Linux Enterprise Server 9.1. The windows installation started without any issues.
If all attempts fails….
You may have to try and try again by deleting all installation files and starting all the installation steps again. It will help if you know how to edit your registry settings to delete all reference to oracle e-business (not all reference to oracle though, as some odbc-related entries have been installed by Microsoft and require your registry settings to function)
Alternatively, send me your box, your mailing address and a token (money of course, and I may be able to set it all up for you) – JOKING!
CAVEAT: I will not be held responsible if anything unsavoury happens to your system in the course of you following the steps I have highlighted above either correctly or incorrectly. However, if you are successful, please sing my praises all over the forum and ask that I be rewarded by Oracle!
Olu

Hi
If anyone need the document to "How to install Oracle Applications 11i on Windows 2003" i can forward the document with screen shots with detailed steps.
Reg
Dwaraka

Oracle EBS 11.5.10.2 not working in IE 9 on Windows 7 64-Bit

Hi,
I upgraded our Oracle EBS(11.5.10) to 11.5.10.2+DB 11g R2+Sun JRE.
Some users having IE 9 on Windows 7 (64-Bit) are not able to access the Forms based products, though this combination is mentioned in Note: 290807.1.
Please let me know if any work around is there for this issue. Users don't want to use FireFox.
Rgds,
Thiru

Please post the complete error message as requested above.
Also, check Apache and the application.log file for any errors.
In Steven Chan blog its mentioned that the following is supported for R11i.
32-bit Windows 7, 32-bit browsers, 32-bit JRE
64-bit Windows 7, 32-bit browsers, 32-bit JRE
Our users are having 64-Bit Windows 7 and IE 9. Since I didn't know if the IE 9 was 32-bit or 64-Bit , I removed the IE 9.
64-Bit Windows 7 is not allowing 32-Bit IE to be installed.You do need to install a 32-bit of IE9.
I have all the pre-requisites mentioned in the blog.Please post the complete error message.
Thanks,
Hussein

Oracle EBS GL Journal Line Description not being extracted by ETC

It seems that the ETL for Oracle EBS (R12) includes the JE Batch Name, the JE Header Name/Description, and the JE Line Number. However, it does not include the JE Line Description. We have been able to meet all of our requirements based on out-of-the-box ETL and are trying to avoid customization. Has anyone run into this issue and has any customized the ETL to accomodate the need.

yes most of the times there are alot of customizations ...
If you are doing any customization to out of the box ETL job then you will do that in custom folders such as custom_sde or custom_sil. Now your modified etl job is in a new Informatica folder in order for this new etl job to run by DAC you need to create a new folder in DAC with the same name as in informatica and associate it with corresponding informatica folder.
Please refer to the DAC Guide Section 5 for more step by step information !!
Hope this helps !!

Oracle EBS 12.1.3 and SOA 10g hardware sizing

Hi All,
To give you the background, we have integration requirements where in one of the interface about 20000 sales orders come in the system everyday and they have about 3-5 lines per sales order. Most of these orders come between 3-6 PM. We have 50 other interfaces along with this but this is a major one. Client is concerned about performance and so we have to give right design and right hardware sizing so that the system is able to handle all the load without causing performance issues. We are planing to use Oracle EBS 12.1.3 and SOA Suite 10.1.3.5 (10g)
Any processes, documentation on how to go about hardware sizing, tools will be helpful
Thanks,
Rahul

Any Updates??

How to upload data into form of Oracle EBS R12 using ATS ver 9.0

Hi experts,
Could you please guide me how to upload data into form on Oracle EBS R12 using Oracle Application Testing Suite verson 9.(The simpliest way)
For example: I need to create user account on Oracle EBS. Normally, I use Dataloader to upload the data, however it just can upload one by one record, cannot upload multi record at same time. Moreover if the performance of server is low, so I will get the issue when using dataloader.
Thanks in advance
Best Regards
Hieu

Hi you can create Virtual users to enter data. Note than you have to name the objects accordingly.
For Example default recording provided by Open script is ObjectNAME_(Index No of the object).
when you record one iteration the name of any object would be ObjectNAME_(0)
You can then create virtual users so the index will increment as the total number of Virtual users increases. Also you have to handle which row of your test data would get mapped to which Virtual user in the script run session.
Thanks

Oracle ebs is not opening in mozila

Dear Experts,
I am having oracle ebs 12.1.3 and it is opening in internet explorer whilst its not opening in Firefox Mozila 26.I am able to login but after that page is not opening ,
Could you please share your remarks to sort out this issue?. I have removed and reinstall the Mozilla also.
Thanks

Hi,
Try on a certified version
https://blogs.oracle.com/stevenChan/entry/firefox_24_certified_with_oracle
Recommended Browsers for Oracle E-Business Suite Release 12 (Doc ID 389422.1)
Regards
Yoonas

Alert issue in oracle EBS

Similar Messages

Maybe you are looking for