Alert Log time showing a different time

Hi,
Our Oracle 10g database is hosted on HP-UX B.11.31 U ia64 server. Recently after Rebooting the server
we noticed the time in the alert.log and the time in the server is entirely different.
when we queried the date in the database and in the server it shows the same time, but the alert.log is giving
the different time.
Whether anyone experienced this sort of problem and plz share how you rectified it

"When you query the time from database say select sysdate from dual, it is taken from system time"
It is a bit more complicated.
When you use the BEQueath protocol, the time is taken from the system clock, modified by the TZ variable for your session.
When you connect using the listener, the time is taken from the listener, modified by the TZ variable for the listener session.
When you are on RAC, the listener inherits the time from the global services daemon, modified by the TZ variable for the global services daemon.
I had to investigate this, as Oracle 9i doesn't understand the M3.5-M10:4 syntax I need to make sure the summertime switches on the Europan moment.
Regards,
Sybrand Bakker
Senior Oracle DBA

Similar Messages

Objects to show at different times on a slide not showing up

Hi Everyone,
I hope this problem is minor and that I’m just missing a small step but here it goes…
I’m using Captivate 4 and I’ve only been using it on one particular computer. I updated a captivate project that I’ve been working on since September and I’ve finished all the edits (added a picture, changed a few words) as requested by colleauges when all of a sudden, some objects that were suppose to show at different times on the slide were not showing up at all. The frustrating part is I actually finished the project! When I do a preview within the edit view, the objects appear as it should, however, when I publish it or do a preview on wepage, the objects are not appearing at all (ie a word at 10 sec, another at 20 sec). Anway, there were only 3 slides acting like this, all with objects are suppose to show up at different times on the slide (these were not the slides that I recently edited). My video works fine, my quiz works fine, and I’ve uploaded an initial version of my work on a Pathlore LMS with no problems (publish specs: flash 8, AS2).
I have several other projects that are less complicated (ie no video, no objects showing at different times within the slide) and they are OK. I’ve checked on other computers and same problem.
I tried deleting the slides, and redoing it again within the same project but still wont work I tried copying everthing on a new project with the same size with no luck.
I tried making a 2 slide project with objects showing up at different times and it works.
Is my project corrupted in some way? What are the possible culprits for this problem?
I really hope I don’t have to start from scratch…
Thanks in advance!

Hi there
While it's certainly possible that the project has somehow become corrupt, you might find that simply closing and restarting Captivate changes things.
Have you tried that? I've seen it where bits and pieces are suddenly missing. After I restarted, things were just fine again.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Droid X showing 3 different times at once

Droid x displays 3 different times simultaneously. At this moment the lock screen show 9:23 pm the digital clock widget on my home page shows 10:25 pm and the small clock in upper right show 10:21
I've tried rebooting both with and without auto update turned on
It is unpredictable when my alarm will go off and I have lots of times too choose from to get someplace on time...
Should mention that this past weekend (during DST) I traveled from MA to NS Canada. But have traveled to Nova Scotia many times without having this issue.
how do I fix?
Wayne

Oh no, WayneL! That's not good.
I would like to help.
Just as bearone21 mentioned, this can be application related as well as location related. What zip code are you located in? Have you downloaded any particular Clock widgets? If so, remove the widget and see if the time shows correct. Also, let me suggest you power off the device and remove the battery for approximately 30-60 seconds, then once powered back on reprogram by dialing *228 and select Option 1. Once reprogrammed, see if the time displays correctly.
Let me know the results of your testing so I see if we need to further troubleshoot.
Thanks,
AnthonyTa_VZW
VZW Support
Follow us on Twitter @VZWSupport

When i set a event on my mac it shows a different time on my iphone

what is the solution, event time set on my imac, say 8am shows on my iphone cal as 4pm?

See if this quote from this page helps:
'Turn on Calendar time zone support
Choose General > Date & Time and turn Time Zone Support on. WhenTime Zone Support is on, Calendar displays event dates and times in the time zone set for your calendars. When Time Zone Support is off, Calendar displays events in the time zone of your current location.'
I don't have an iPhone to check but the implication seems to be that there is a separate setting for the calendar itself.

Alert log file show me this error

Alert<DB Name>.log
=================
Tue Aug 31 12:13:00 2010
Errors in file /u01/app/oracle/admin/<DB Name>/udump/<Instance Name>ora5520.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
Tue Aug 31 12:13:00 2010
Completed: ALTER DATABASE OPEN
Tue Aug 31 12:13:00 2010
db_recovery_file_dest_size of 3072 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
==================
<DB Name>ora5520.trc file
=================
/u01/app/oracle/admin/<DB Name>/udump/<DB Name>ora5520.trc
Oracle Database 10g Release 10.2.0.3.0 - Production
ORACLE_HOME = /u01/app/oracle/product/10.2.0
System name: Linux
Node name: <DB Name>-invdev-ora-1
Release: 2.6.18-128.el5
Version: #1 SMP Wed Dec 17 11:42:39 EST 2008
Machine: i686
Instance name: <Instance Name>
Redo thread mounted by this instance: 1
Oracle process number: 15
Unix process pid: 5520, image: oracle@<DB Name>-invdev-ora-1 (TNS V1-V3)
*** SERVICE NAME:() 2010-08-31 12:12:59.130
*** SESSION ID:(159.3) 2010-08-31 12:12:59.130
Thread 1 checkpoint: logseq 2033, block 78039, scn 67047227
cache-low rba: logseq 2033, block 80480
on-disk rba: logseq 2033, block 80921, scn 67048897
start recovery at logseq 2033, block 80480, scn 0
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00313: open failed for members of log group 1 of thread 1
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 220Kb in 0.38s => 0.57 Mb/sec
Total physical reads: 4096Kb
Longest record: 2Kb, moves: 0/748 (0%)
Longest LWN: 48Kb, moves: 0/17 (0%), moved: 0Mb
Last redo scn: 0x0000.03ff15c0 (67048896)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 52/52 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 1442/1494 = 1.0
*** 2010-08-31 12:12:59.517
KCRA: start recovery claims for 52 data blocks
*** 2010-08-31 12:12:59.640
KCRA: blocks processed = 52/52, claimed = 52, eliminated = 0
ORA-00313: open failed for members of log group 1 of thread 1
*** 2010-08-31 12:12:59.641
Recovery of Online Redo Log: Thread 1 Group 1 Seq 2033 Reading mem 1
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 52/52 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 1494/1494 = 1.0
ORA-00313: open failed for members of log group 1 of thread 1
Error in executing triggers on database startup
*** 2010-08-31 12:13:00.526
ksedmp: internal or fatal error
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
Please guys can any one tell me what's prob.
It's Oracle 10G R2 Linux Machine. also it's development environment.

Hi,
Look at the thread
Database startup error message
Regards,

How do i create a new event in a different time zone in iCal ios7?

New update seems to have made this disappear in iphone.
I'm also looking for same solution on MacBook Pro
THanks
j

Several settings in Settings > Mail, Contacts, Calendars affect Calendar and your calendar accounts. These include:
Syncing of past events (future events are always synced)
Alert tone played for new meeting invitations
Default calendar for new events
Default time for alerts
Calendar time zone support, to show dates and times using a different time zone
Which day starts the week

Creating appointments in a different time zone with accuracy

I have my computer setup to set the date and time automatically. I also have iCal set to my current time zone. How do you create appointments for times in a different time zone with accuracy while you are in your current time zone?
For example, when I prepare for a business trip, I set my agenda in iCal while I'm at home. All of these appointments show up in my current time zone. When I get to my destination the times for my appointments are incorrect. I live in New York, but have a meeting in LA. The meeting is at 8:00 am PST. When I'm home, I set the appointment for 8:00 am, but by default, it is EST. When I get to LA, even if u change the time zone settings, the appointment shows up as 5:00 am PST. Do I need to set the appointment for 5:00 am while I'm at home in New York to take into account the time difference? Seems confusing and difficult to manage on a continual basis.
Any suggestions?
Mac

To elaborate further - what the current iOS manual says about times zones is:
_*When Time Zone Support is on, Calendar displays event dates and times in the time zone of the city you selected. When Time Zone Support is off, Calendar displays events in the time zone of your current location as determined by the network time.*_
Does that mean with time zone support off that when you move from one time zone to another and your phone readjusts its time setting that the appointment times are changed also or does it mean that the assumption is made that the event time is to be left as is. I believe it is the latter, but the description makes it sound to me like the opposite.
I do know that if one has time zone support enabled and you are in FL with an appointment with a California time zone enabled the time shown for the event will be 3 hours later. The description seems to say the opposite, but that was my experience in the past. In addition if time zone support is enabled and you change time zones, the time shown for the appointment will be changed.
For me at least a much clearer descrpition of what time zone support does is needed.
+*We need a checkbox that says adjust appointment time to correspond with time zone you are in in comparison to zone of event, and a checkbox that says:absolutely don't change the times I enter for events.*+
Message was edited by: waldhaus1

Standby atabase in different time zone than Primary databse

I am curious to know, If my primary database is in NY and I am planning to have my DR in London.
Is this configuration possible by having primary and standby host box having different time(as their time zones) I am thinking issues about how oracle will cordinate shipment of archive logs which are in different time zones.
I know one way to configure it....
even If box is in London, Box will be having time of NY timezone on host..

I would expect, though, without having had a chance to test it, that you might run into problems using various time-based DataGuard configurations and settings. For example, if you configured your standby to wait X minutes before applying logs from the production server, I would tend to suspect that you'd have issues.
In the event of a failover, you might also have application-level issues related to "duplicate" dates. If your application runs continuously across daylight savings time switches, you're probably fine, but a lot of apps aren't doing anything in that one hour a year that the clocks fall back an hour and discover that they're not quite as bulletproof as they'd expect.
Justin

Different times on two iPhones 4s

My wife and I have two iPhone 4s' on Verizon. We live in Phoenix, which never moves its time. Our phones each show a different time. Aren't the times linked to the cell towers? Any idea as to what gives.

Try restore from backuo using iTunes.
If no joy, restore as new without the backupand sync manually
If the problem persist, talk to you carrier.

Generic Alert log metric

I'm trying to figure out how to setup the generic alert log metric to run a corrective action based on a warning .
So when i try to work with the generic alert log metric .
it provides a time/line number which has an all others with a warning and a critical .
if i tried to add a new line with a % in the time/line number and warning expression it wont let me add it .
what am i doing wrong here . Obviously since this is the alert log i will not know the time or line number of when i will recieve this error unless i'm reading something wrong here.

if i tried to add a new line with a % in the time/line number and warning expression it wont let me add it . Try "%" (in quotes)

Gap sequence in alert log, but not according to v$archive_gap

I'm pretty certain i'm missing something straight-forward here, but just not seeing it at the moment, so any assistance would be useful.
I'm using RDBMS 11.1.0.7 on Linux RHEL 4.
I have a Physical standby.
The alert log is showing a gap in the sequence of approx 100 files. However, if I query v$archive_gap I get 'no rows returned'.
Logs are continuing to be shipped from the primary without any issues, but are obviously not being applied waiting for the 'gap' to be restored.
I'm rapidly coming to the conclusion I will have to re-build the standby, but any pointers that may help prevent this would be useful.
I have re-built the broker configuration.
Thanks in advance.

show parameter log_archive_dest;
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string location="/u01/ora/arch
/DEV", valid_for=(ALL_LOGFI
LES,ALL_ROLES)
log_archive_dest_10 string
log_archive_dest_2 string service="dstarst", LGWR ASY
NC NOAFFIRM delay=0 OPTIONAL c
ompression=DISABLE max_failure
=0 max_connections=1 reopen=
30 db_unique_name="DEVST" ne
t_timeout=15 valid_for=(onlin
e_logfile,primary_role)
log_archive_dest_3 string
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string ENABLE
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string ENABLE
log_archive_dest_state_3 string enable
log_archive_dest_state_4 string enable
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable

Alert.log showing different time stamps

SR 6582667.992
AIX5L 5.3
The alert,log shows the following:
Thu Oct 18 15:16:55 2007
ALTER DATABASE CLOSE NORMAL
Thu Oct 18 19:16:55 2007 ----------------------------> Time changed
SMON: disabling tx recovery
SMON: disabling cache recovery
Thu Oct 18 19:16:55 2007
Shutting down archive processes
Archiving is disabled
Thu Oct 18 19:17:00 2007
ARCH shutting down
ARC1: Archival stopped
Thu Oct 18 19:17:05 2007
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC0: Archiving disabled
ARCH shutting down
ARC0: Archival stopped
Thu Oct 18 19:17:07 2007
Thread 1 closed at log sequence 100
Successful close of redo thread 1
Thu Oct 18 15:17:07 2007 -------------------------------------------> Time changed back
Completed: ALTER DATABASE CLOSE NORMAL
Thu Oct 18 15:17:07 2007
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thu Oct 18 15:17:12 2007
Any Idea why this is happening.
I have obtain the OS script that does the shutdown an startup, it is in the SR.
Thank for the help.
Loren

Hi,
Some one or some process is updating date on your server. Following is an example:
I started my database and then modified the date and following is the information recorded in the alert log.
QMNC started with pid=20, OS id=3164
Sat Oct 20 00:44:23 2007
Completed: alter database open
Sat Oct 20 00:07:36 2007
Shutting down archive processes
Sat Oct 20 00:07:41 2007This is how I modified time on my PC.
C:\Documents and Settings\momen>time
The current time is: 0:45:07.36
Enter the new time: 00:05:00Regards

Multiple channel data with different time stamp logging

I have peaks and valleys from multiple channels with different time stamp but I am not able to log to a single file. Any idea on how to do this?
Attachments:
Single Point Peak Valley Log.vi ‏53 KB

Hi Dennis,
Sorry for that I have modified the VI.
Because the peak and valley of every channel will occur at different time and I want to log the peak/valley with the time stamp.
How can I log them on the same file.
Attachments:
Single Point Peak Valley Log_Mod.vi ‏53 KB

Iowait time out warnings in my alert log

New sqlplus connections were failing when
Checked the alert log I see warnings
And some wait events in v$session_wait
So what could be the reason will this be resolved if I add more redo log groups. Or is the problem some where else if so what should I look more.
WARNING: aiowait timed out 5 times
Tue Feb 21 06:41:23 2006
WARNING: aiowait timed out 4 times
Tue Feb 21 06:48:36 2006
WARNING: aiowait timed out 6 times
COUNT(*) EVENT MAX(SECONDS_IN_WAIT)
2 SQL*Net message from client 5280
1 SQL*Net message to client 0
4 buffer busy waits 864
1 db file parallel write 9994
4 enqueue 3983
3 log file switch (checkpoint incomplete) 1393
1 pmon timer 3
5 rdbms ipc message 1829858

There seems to be a serious problem with your I/O system. Check for disk corruption or known OS issues. Have you patched the OS?
For less ideal solutions, you could try out following options:
1-
Set this parameter, and restart the instance
disk_asynch_io = false
dbwr_io_slaves=10
2- Increase the size of Buffer cache and sort area size
3- restart the instance
regards.

Different times showing for an event

I received in invite from someone who is one hour behind me. He sent me a test invite ("Fake 2") for 10am my time, which is 9am his time.
In the Calender, the time is shown correctly, but when I click on it, it shows his time zone. Why is that? Why won't it show the time of the meeting in my time zone? Note that on my iPad, I see 10am in both cases.
This looks like this has something to do with the "Turn on time zone support" preference. However, I'd like to be able to use that function to change times if I want to set my Calendar to different time zones I'm visiting but see the actual time of the event in my time zone when I click it. If not, it can be a bit confusing to see two sets of times.
What am I missing?
Thanks,
Tony

Dispatching event from any component by either by using this or simply without this
can not be listen by each and every componet of the application,depends upon where you have write addListner. Check Event life cycle
in the flex. While if you are using the system manager for dispatching the event and
also for listenting the event so in that case you will always listen the event.
You can visit this link for making it simple to use and understand.By this way you can always listen your event
inside any component in your application.
http://shardulbartwal.wordpress.com/2009/04/15/managing-custom-events-in-flex-30-in-a-easy -way/
Hope it will help you.
with Regards,
Shardul Singh Bartwal

Alert Log time showing a different time

Similar Messages

Maybe you are looking for