Alert long text not visible
Hello,
I have a problem triggering an alert with dynamic text out of a bpm. The alert is triggered correctly (I can't see any dump in tzhe log files), I can see the alert in my alert inbox, but the long text isn't filled. I'm using SAP Netweaver 2004s SP 9 (SAP Basis 7.00).
Then I tried the same preocedure in a SAP Netweaver 2004 SP 15 (SAP Basis 6.40) with the same settings, and it worked fine. I can see the long message in the alert inbox. The only differnce was, that in 2004s the alert classification 'Webflow Alert' didn't exist, so I had to create it.
Does anybody know, where the problem could be?
Thanks,
Thomas
Hi,
Just check that the length of the message is not more then the required limit. If thats the case it sometimes does not show the message.
Else, just try re-activating that step again by making some dummy chnages.
This problem happens at times when you are using dynamic variables .
Regards
Vijaya
Similar Messages
-
Alert : long text not complete
Hi all,
I manage specific alerts in my BPM.
I have defined it as "dynamic text" alerts in ALRTCATDEF.
These alerts are well thrown by PI however I can see only the first caracter of the long text.
My version is PI 7.0 SP8.
Is it a known issue ?
Thanks in advance,
J.C.Hi JC,
This may not be an issue at all...and just the way alerts are shown in the inbox.
Just right click on the table cell where you see the first character of the text, right click and select "view source".
You should be able to see the long text within the HTML source.
Though not a solution but this can be used to test out the alert.
Regards
Gaurav
PS: Please reward points for helpful answers. -
After creation producton order long text not visible inCO03
Hi
while creating production order with co01 i entered long text in longtext tab of the production order
after that in display mode co03 that long text is not visilbe. tell me why and what are the setting required.
thanks
RAVIwhen i am creating production order
i enter materil, plant, order type
after that in producto header screen
i enter total quantiy 1 and scheduling type current date in genaral tab
after that i go to long text tab i enterd long text and i saved the order
then i check in co03 the long text in entered not visible.
i am in single tc code that time co01
thanks
ravi -
I create a long text using 'SAVE_TEXT' but when I go to XD03 it is not there. When I run 'READ_TEXT' I can then see the text.
How do I see the text in the transaction XD03?
I did put an 'X' in the 'INSERT' field of 'SAVE_TEXT' function module, but this didn't help.
Please help.hi,
u can use CREATE_TEXT FUNCTION MODULE to upload long text.check the record which you are uploading to xd03.
for example
for aco3 long text is uploaded based on asnum
the file is
asnum long text
SAL-345 To upload long text
that is asnum value should be in capital numbers,check it.
regards
siva -
Hi
I have configured Service Desk for Solution managter. Wen the user create a support message it appears in the solution Manager but i am unable to see the long text that the user has written. How can i cross check it and where the long text appears. How can I resolve itHi ,
Then this is something to do with the text determination procedure for your transaction type SLFN.
Check what are all the text ID's in that text field(e.g Description , Log , reply.... etc). Whether for all the text ID's it is blank?
Check what is the text determination procedure assigned to SLFN? In standard SLFN0001 is used.
Then check in the configuration in the path
SAP Solution Manager -> Scenrario Specific Settings ->Service Desk -> Text determination procedure-> Text object -CRM_ORDERH ->procedure (SLFN0001)-> definition of procedure and check the changes column of the texd id's.
If the changes column is selected as 'P' it is an editable field in support message, if it is 'R' then it will be display.
Check for your text determination procedure.
Hope this resolves your problem,
Thanks,
regards,
Srinivas.
You can view the text entered by the person in the trasnaction data tab -> overview. you can verify the data in this field with the data entered from help-> create support message
Edited by: Srini24 on Apr 29, 2010 2:31 PM
Hi Muhammad,
+Also please check if the text determination procedure is defined in your transaction type SLFN. Even if it is left as blank you willhave the field as 'grey'+ in the path
solution manager-> scenario specific settings ->service desk -> general settings->define transaction type->SLFN
please check and confirm.
Award points if issue is resolved.
regards,
Srinivas
Edited by: Srini24 on Apr 30, 2010 1:37 PM -
Routing Long text not populated using LSMW
I need help with the ROUTING LONG TEXT using LSMW. I'm using the standard LSMW direct input program /SAPDMC/SAP_LSMW_IMP . I'm confused with NAME field while loading the data. I have tried to create the routing long text manually after successful creation i opened the Longtext at header screen and opened GOTO--> HEADER there i have seen TEXT NAME is constructed based on CLIENT || N || GROUP || GROUPCOUNTER || INTERNAL_COUNTER (CLIENT||N||PLNTY||PLNNR||PLNAL||ZAEHL - field names) I used the same logic to construct the test data for another routings which were created and doesn't have the long text. I have run the lsmw program and executed successfully but when i open the routing in CA03 i dont see the long text populated.
Test data used looks like this:
OBJECT NAME TDID SPRAS TEXTFORM TEXTLINE
ROUTING N500000890100000001 PLKO E * THIS IS A TEST1
ROUTING N500000890100000001 PLKO E * THIS IS A TEST2
ROUTING N500000890100000001 PLKO E * THIS IS LINE3
ROUTING N500000910100000001 PLKO E * LONGTEXT1
ROUTING N500000910100000001 PLKO E * LONGTEXT2
My question here is do i need to construct the NAME as i have mentioned above or do i need to just send the Routing Group number into the file for the NAME field. Help me understand what do i need to populate into NAME field.
Please help with the mistake i have done.
Pretty much appriectiated for your replies.You asked the same question in two different forums multiple times:
Standard LSMW to load Routing Long text
Re: LSMW : Long text not visible after the import of data
Please use same one thread for one question.
I gave you most of the needed information assuming you know how to do LSMW in the first thread itself.
You need to have the following fields in your source structure in addition to other fields like long text
MANDT
PLNTY
PLNNR
PLNAL
ZAEHL
In the step Maintain Field Mapping and Conversion Rules assign the source field MANDT to the variable NAME and then again place the cursor on the variable NAME and assign variable PLNTY, (now you have two source field assigned to same variable) similarly assign all the remaining 3 source fields PLNNR, PLNAL, ZAEHL. (now you have 5 source field assigned to same variable).
Now select the variable NAME by placing the cursor click on Rule (Insert Rule) and select the radio button Concatenation .
Make sure that in your input file you have leading zeros for PLNNR PLNAL and ZAEHL etc. like below
50000089, 01, 00000001
Also, you don't need maintain the value of OBJECT, TDID, SPRAS, TEXTFORM as source fields. You can directly maintain them as constants in Maintain Field Mapping and Conversion Rules by click on the push button Rule . -
Vendor text not visible in SAP R/3
Hello All,
When a purchase order is created in SRM with additional text - ie. Vendor text. ( Either at item or header level) This text is not visible when viewing the purchase order in SAP R/3.Does it not come default ??? i am expecting the text to be reflected In the text tab in the item detail section.
Does it require any BADI or config for the same to reflect in R/3
Regards
~RupeshHi
You can transfer the long text to the backend through the R/3 backend <b>bbp_po_inbound_badi</b>. Your code must be placed in the <b>BBP_MAP_BEFORE_BAPI</b> method.
<u>Use any of the SRM BADIs :</u>
1) BBP_ECS_PO_OUT_BADI
2) BBP_CREATE_BE_PO_NEW
3) BBP_CREATE_PO_BACK
4) BBP_LONGTEXT_BADI
<b>Please go through the links below -></b>
Re: Extended Classic Scenerio and Vendor Text
Re: MM - SUS: transfer text of the purchase order from R/3 to SRM
Do let me know.
Regards
- Atul -
Hi
I have configured alerts for a BPM Scenario. I have enabled the dynamic text . I am able to see the alert in the Alert inbox, But in the long text it shows only one character.
I am working in XI 7.0 SP level 8. What could be the problem.
With regards
VaradharajanHi
835031 cannot solve the problem as this note is for 2004s SP1 and Vardharajan is on SP08 same as me and I am having the same problem. But still haven't got any solution.
Let me know Vardharajan if you have solved this problem!
-K -
Hi all!
I have a problem when a BPM throws an alert with dynamic text from a control step:
- If the control step have the next text: &var_container&
The long text in the alert inbox is filled with the content of the var_container.
- If the control step have the next text: Message with id &var_container& failed
The long text in the alert inbox is empty...
Thanks in advance,
RobertoMessage ID is not accessible inside a BPM and hence the problem.
Why is not accessible -> Look at this really interesting thread.
Re: Message id in BPM
What is the solution - workaround from Michal
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
Regards
Bhavesh -
Digital graph cursor text not visible after build
We are using Labview 2011. Our application has been using digital graphs, with cursor text to define digital transition information since Labview 7.1. We have ported our application to Labview 2011 (and also 8.6.1 in which it works fine). While in the Labview development environment, the cursor text displays correctly. However when we build it, and run the .exe, we cannot see the cursor text. Our debugging efforts have been in vain - the xy locations are correct, but the cursor text is not visible.
We want to standardize our next version software on 2011 (even though the Labview 2011 version is 4x larger and 2.2 x slower than the Labview 7.1 version) because we need x64 support, and want to run in Linux as well. We have spent considerable time trying to find out what is wrong, but the debugging time is very long to go through the thought - build - run cycle.
Any help on why this might be would be gratefully appreciated.
- Bart Schroder, CleverscopeBart,
Can you please post a screenshot of your code as well as what's happening when you run your code?
Thanks,
Renee M
Applications Engineer
National Instruments
Regards,
Renée M
Applications Engineer
National Instruments -
Text Area for long text not appearing properly for BBP_POC_DISPLAY Service
Hi,
In our development we have added additional Icon at ITS in Process PO transaction and onclicking that icon Web dynpro AB screen called with the Purchase Order No of selected row .(SRM 5.0)
There is one more icon in Web dynpro screen on click of that Purchase order service open in ITS with display mode .This is achieved with service BBP_POC_DISPLAY from Web Dynpro-AB.
This is also working ok only the issue is in Document tab of PO The Text Area for long text appear at Top .This functionality is working fine with BBP_POC service from ITS .
Has anybody faced this kind of issue ?
Thanks,
SMSHi SMS,
I am unsure of the additional component you are talking about. In general, issues with text area misplacing, is solved by note 1067625. May be you can check it.
thanks,
Ashwin -
Long text not displayed in outpur of adhoc query
Hi,
I am trying to run an ad hoc query in which i need the Org unit long text in the output.
When i run i only see the short text of the Org unit.I tried changing the output display option as 'Value and text' and 'text' both but it shows the short text only.
Could you please suggest what changes i need to make to the infoset to view the long text of the Org unit.
elp will be highly appreciated.
sushilThe help text does not say that this is the case for routings (and I dont know it either as I never loaded text for routings).
Of course you can read your text with the function module, as you enter the keys like you done it to load the text.
But this is not a proof at all.
In 90 % where the text does not appear it is just a matter of the used key. maybe forgot to have leading zeros in the name field.
Best you enter a text manually in a route, then you use SE16 with table STXH to find this record, and then you compare the key fields of this record with the key fields of a record you created with the upload.
if this is all okay, then it might have to do with a text indicator in the normal tables of the routing. -
Why is my text not visible in text boxes?
I have a set of text boxes that I have used throughout my book as little sidebars providing tips to the reader. These text boxes lay out beautifully within iBook Author. When I preview on my iPad, the text within these boxes becomes invisible. The text is still there — if I double tap on the iPad to use the search function, the text can be selected and shows up in the search box, but is still invisible.
I am hoping this is some kind of user error on my part that can be easilly corrected. It appears to affect all two dozen tips I have inserted into the doccument. However, when I create a new text box it seems to function fine, even when following all the same steps to lay it out. You will see this in the green box in I stuck in example for the purposes of obtaining your help. (Please help! )
All the affected text boxes were cut and pasted from the original, so perhaps I set something wrong? It's odd that the preview does not match the iPad layout.
Here are some screenshots to make it more clear. First, the layout in iBooks Author:
Then a screenshot from the iPad after it has been previewed:
It may also be noteworthy that as the preview loads into the iPad, the text is visible, then vanishes as soon as the upload is complete. The small page previews on the ipad when 'zoomed out' to the overview also show the text, though when you go to the page it is still blank. Here is what the small page view looks like:Did you confirm the text/box is 'to the front'...on the top of everything in that same location? Should work if so.
Yes.
Are they any other elements that are maybe hiding there?
No.
Did you try another font color or font?
Yes. Font, style and color (black, white, grey, green purple) do not appear to have any effect.
Are the boxes anchored graphics...
No, they are free floating but the problem persists if I anchor them.
and is the text in a box on top of the graphic?
No, the text is integrated. The box was made by creating a text box.
Even with different answers, this problem should not occur — if the text were hidden behind something, it should show that way within the program and the small preview, no? -
DW8 text not visible in design view
I have imported a site from DWMX(6?) to DW8.
In DWMX everything is visible in design view.
In DW8 the text is NOT visible in design view unless I switch off rendering using CSS (Display Styles Off), but displays fine in a browser.
If I switch off rendering using CSS I can see and edit the text but it is not remotely WYSIWYG
The pages are created from templates and were originally created using DW4 or DW3.
The site URL is http://www.decisionmodels.com/
There has to be a simple solution to this but I just cant find it.
Charlesfont verdana { font-family: Verdana, Geneva, sans-serif; }
I changed the font from default because one of the old fixes I found for Dreamweaver suggested that... I could change it back.
You are aware that this is not a legitimate CSS selector, right?
Forgive my ignorance, but what does this mean? Does it refer to my font selection? Or something else?
It means that your selector "font verdana" is not a legal selector. It says to find all "verdana" tags that are descendents of a font tag. Clearly there is no valid HTML tag called "verdana". If it was your intention to create a rule that would allow you to format text as verdana, or geneva or sans-serif, then that would have to be done with a CLASS selector, e.g.,
.font_verdana { font-family: verdana, geneva, sans-serif; }
Note the leading 'dot' and the underscore - spaces are not allowed in selector names. -
Long Text not transfered from Notification to Order
Hi Experts,
We have 4.6 c version where in the Long Text from Notification created does not gets transfereed to Order if Order is created through Notification.
Does any one knows about any config missing or any note which needs to be applied.
Also if we go for E.C.C 6.0 do we need to maintain the config
Plant Maintenance and Customer Service->Maintenance and Service Processing->Maintenance and Service Order >Functions and Settings for Order Types>Define Notification and Order Integration
instead of or in addition to the config
Plant Maintenance and Customer Service->Maintenance and Service Processing->Maintenance and Service Notifications >Notification Creation>Notification Types-->Assign Notification Types to Order Types
Appreciate your valuable input in this regards
Thanks
ManishHi
These are the some of the notes related to ur issue...
I am not sure its gonna solve... but check it.. u might get some idea
[445628|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=445628]
[661800|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=661800]
Pl Note : i think in 4.6c it not available kindly check in Define notification and order data in one screen whether option is available or not
- Pithan
Maybe you are looking for
-
Assistance pls: ~50% links not working on page, iWeb 3.0.4
I built a new page on a longstanding iWeb site last night, uploaded it (to my own domain hosted at Earthlink) and discovered that about 50% of the links on the page are not working, though all the links are formatted identically. Here's the page: htt
-
Very Strange AFP/SMB file service issue, slow, intermittent connections.
There's a bit of a saga to this, so please stay with me. X-Serve G5, first loaded with 10.3.2, and over 2 years upgraded to 10.3.9. All the server has ever done is be a standalone file server to Mac only. There is no AD/OD intergration, or any fancy
-
Maintain outgoing EDI-connection data for partner 199093 during ORDRSP
Hi Experts, We are trying to send the "Order Confirmation" using "ORDRSP" IDOC message type. So we created the new Output type as ZBA0 (Copy of BA00) and assigned with the sales output pricing procedure. Then we maintained the "partner
-
How enable my AMD adapter using the device manager
The message that comes up after updating my AMD driver is this: The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter. Please update your AMD graphics driver, or enable your AMD adapter using the Display
-
Hi Every one... am new to SAP am learning WebDynpro Java.. now am working on Multiple selection on a table but its giving error like ur cardinality is not supportin Multiple Selection. i changed cardinality as 0..n. please help me Thaks Ramesh Edited