Alert Mail when Notification Mailer goes down

Hi all,
Is it possible to fire an alert whenever the Workflow Notification Mailer goes down ?
Regards,
Mash

hi Mash,
Is it possible to fire an alert whenever the Workflow Notification Mailer goes down ?EBs release version and platform
please see this
Alert to monitor Workflow notification mailer services
;) AppsmAsti ;)
Sharing is Caring

Similar Messages

Is there a requirement to restart the JMS/Weblogc Server everytime when the DB goes down?

Question:
When the Database is shutdown gracefully everything was fine.
But when the Database is brought down with shutdown abort the MDB consumer will never consume messages from the topic again. And we need to restart the WebLogic Server in order to get the messages consumed again.
So is there a requirement to restart the JMS/Weblogc Server everytime when the DB goes down? If not, what type of failures will require the JMS/WLS restart?

On a DB failure, a WL JDBC store service will make a brief attempt to reconnect before shutting itself down along with any services that depend on the store.
It isn't necessary to restart the entire WebLogic Server JVM to bring the affected service(s) back if you can use the Automatic Service Migration feature. ASM can automatically restart a failed service on a different WL Server in the same cluster, and/or can try a restart-in-place for the service if the service's original host WL Server JVM is still running. The Automatic Service Migration (pdf) white-paper has a thorough discussion of this area.
In addition to ASM, there's also a "whole server migration" option that can automatically restart or migrate an entire WL server.
Tom

IOException when remote client goes down in Linux

Hello all -
This my first post here. I have ran into a bit of an issue with some code I have written. I have written a small client/server application that works on the premise that if the remote application ends, the socket will be broken, and an IOException will be thrown. I then catch the IOException and then end the particular thread associated with that socket. This works fine in Windows, but when I kill the remote application in Linux, an IOException is never thrown on the server, it's as if the socket is still there even tho the application ended. I'm thinking there is something different that happens when I kill a process in Linux vs Windows. I have tried using the SIGINT, and SIGTERM switches for kill but they made no difference. Does anyone have any idea, admittedly I am a Linux noob, thanks!
-Kam

If the server is reading when the client goes down it won't get an IOException, it will get an EOS condition: read() returns -1, readLine() returns null, readXXX() for any other X throws an EOFException.

Why does it say im using 3.8gb of mail when my mail is deleted?

why does it say im using 3.8gb of mail when my mail is deleted< yes even the trash

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the text on the line below to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

How to display visited sites in a different color? For example, when I'm going down an ebay search list.

How do I make settings so that visited sites have a different color hypertext? For example, when I'm going down an ebay search list I want to know what items I already viewed.

* Make sure that the History is set to at least 1 day: Tools > Options > Privacy > History: "Remember visited pages for at least"
* Make sure that you do not start Firefox in Private Browsing mode (Tools > Stop Private Browsing is grayed, see [[Private Browsing]])
* To see all History and Cookie settings in Tools > Options > Privacy, choose the setting "Firefox will: Use custom settings for history"
Your above posted system details show outdated plugin(s) with known security and stability risks.
* Shockwave Flash 10.0 r12
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Need to send a mail while safty stock goes down compare with actual stock

Dear experts,
I Need to send a mail to concern persion while stock goes down compare with safty stock. We plan to put a check at the point of MARD table updation, Because we not able to put a check at the all transaction codes, So please LET ME KNOW HOW TO PUT A CHECK AT STANDARD TABLE UPDATION?
Thanks in adv,
jayakumar.M

Your best bet may to be place your check in the a user exit for goods movements. The enhancement is MB_CF001, the component is EXIT_SAPLMBMB_001.
Hope this helps,
Mark

Need to send a mail while safty stock goes down

Dear experts,
I Need to send a mail to concern persion while stock goes down from safty stock. We plan to put a check at the point of MARD table updation, Because we not able to put a check at the all transaction codes, So please LET ME KNOW HOW TO PUT A CHECK AT STANDARD TABLE UPDATION?
Thanks in adv,
jayakumar.M

Hi Jai,
According to my understanding,
As soon as the stock goes down from the safety stock a mail should be triggered.
Probable solution (in my opinion)
create a flag in the table set it whenever the stock value goes down.
make calculations like (safety stock as today - safety stock previous date) = 0 if not set the flag and construct a workflow withe receiver settings based on the flag field and trigger a mail to the concerned person.
This is just my idea.
Try it and revert
Thanks and Regards
Srikanth.P

How do I set TB so it does NOT alert me when junk mail arrives?

I keep TB up most of the time in the background while I work because I frequently get emails from my clients and family during the day. The problem is that I also get a lot of junk mail and so TB is also constantly notifying me of this junk mail. This distracts me from my work and takes time from my working day to check what just came in when I hear the notification. I would like to have the option in Settings to select which accounts (I have 4) and which folders within each account should notify me. I need to have ready access to the junk folders so I can check them occasionally for legitimate mail but I don't need to know every time something arrives there. I would like to be notified when new mail arrives in one of the Inbox's but not when it arrives in a Spam or Bulk or Junk folder. Thank you, DaveWK

I don't think you can. New mail is new mail. There might be something on the add-on site. https://addons.mozilla.org/en-US/thunderbird/

Strange "Database Alert" message when opening Mail

For the last several days, each time I launch Mail, it retrieves mail and then up pops an alert:
"inconsistencies in your sync information for bookmarks were detected and have been repaired."
What is that all about?
It's annoying. How can I fix it?

I receive the same result with contacts

ASA has to be failed over when primary ISP goes down.

I have an outside 7206 router that is configured with BGP. Behind that I have an ASA 5520 with a failover. Everytime my primary ISP goes down I have to failover the ASA to restablish a connection to the secondary ISP. When the primary comes back on line I have to fail it over again. I have had Cisco TAC look at the ASA and they didn't see anything misconfigured on the ASA. Doesn't seem to be any problems with the router config either. Any Ideas on what could be causing this?

Thanks for your responses. Sorry, I'm new to this. Here are the configs and a simple pic of the primary asa and router the way thery are deployed. I've been dealing with issue for a while. Hoping to get some help here.
7206 router:
show runn
Building configuration...
Current configuration : 4678 bytes
version 12.3
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
hostname lee-border
boot-start-marker
boot-end-marker
enable secret 5 **********************
no aaa new-model
ip subnet-zero
ip cef
ip name-server 206.77.62.152
interface FastEthernet0/0
no ip address
shutdown
duplex half
interface GigabitEthernet0/1
description Univ. of Texas OTS for ISP and Inet2
no ip address
duplex full
speed 100
media-type rj45
negotiation auto
interface GigabitEthernet0/1.7
description Internet2 Access
encapsulation dot1Q 7
ip address 192.88.12.238 255.255.255.252
interface GigabitEthernet0/1.16
description THENet-Access
encapsulation dot1Q 16
ip address 207.80.110.134 255.255.255.252
interface GigabitEthernet0/1.743
description UT OTS TX-BB Peering
encapsulation dot1Q 743
ip address 192.124.228.114 255.255.255.252
interface GigabitEthernet0/2
description Phonoscope ISP Service
ip address 66.60.235.146 255.255.255.248
duplex full
speed 100
media-type rj45
negotiation auto
interface GigabitEthernet0/3
description Lee College Internal LANs
ip address 68.232.208.241 255.255.255.240 secondary
ip address 68.232.208.1 255.255.255.248
duplex full
speed auto
media-type rj45
negotiation auto
interface ATM1/0
no ip address
shutdown
no ima-group
no atm ilmi-keepalive
interface ATM1/1
no ip address
shutdown
no ima-group
no atm ilmi-keepalive
interface ATM1/2
no ip address
shutdown
no ima-group
no atm ilmi-keepalive
interface ATM1/3
no ip address
shutdown
no ima-group
no atm ilmi-keepalive
interface ATM1/4
no ip address
shutdown
no ima-group
no atm ilmi-keepalive
interface ATM1/5
no ip address
shutdown
no ima-group
no atm ilmi-keepalive
interface ATM1/6
no ip address
shutdown
no ima-group
no atm ilmi-keepalive
interface ATM1/7
no ip address
shutdown
no ima-group
no atm ilmi-keepalive
interface FastEthernet2/0
no ip address
shutdown
duplex half
interface FastEthernet4/0
no ip address
duplex auto
speed auto
interface FastEthernet4/1
no ip address
shutdown
duplex auto
speed auto
router bgp 46094
no synchronization
bgp log-neighbor-changes
network 68.232.208.0 mask 255.255.240.0
network 198.216.112.0 mask 255.255.252.0
network 207.80.120.0 mask 255.255.252.0
neighbor 66.60.235.145 remote-as 22442
neighbor 66.60.235.145 description Phonoscope
neighbor 66.60.235.145 next-hop-self
neighbor 66.60.235.145 send-community
neighbor 66.60.235.145 version 4
neighbor 66.60.235.145 soft-reconfiguration inbound
neighbor 66.60.235.145 route-map Lee-out out
neighbor 192.88.12.237 remote-as 276
neighbor 192.88.12.237 description Internet2 Peering
neighbor 192.88.12.237 send-community
neighbor 192.88.12.237 version 4
neighbor 192.88.12.237 route-map I2-in in
neighbor 192.88.12.237 route-map Lee-I2-out out
neighbor 192.88.12.237 password 7 132C4546070901
neighbor 192.124.228.113 remote-as 6922
neighbor 192.124.228.113 description UT-Commodity
neighbor 192.124.228.113 send-community
neighbor 192.124.228.113 soft-reconfiguration inbound
neighbor 192.124.228.113 route-map OTS-in in
neighbor 192.124.228.113 route-map OTS-out out
no auto-summary
ip default-gateway 192.124.228.113
ip classless
ip route 68.232.208.0 255.255.240.0 Null0 250
ip route 68.232.209.0 255.255.255.0 68.232.208.2
ip route 68.232.211.0 255.255.255.0 68.232.208.2
ip route 68.232.212.0 255.255.252.0 68.232.208.2
ip route 68.232.216.0 255.255.248.0 68.232.208.2
ip route 198.216.112.0 255.255.252.0 Null0 250
ip route 198.216.113.0 255.255.255.0 198.216.115.1
ip route 198.216.114.0 255.255.255.0 198.216.115.1
ip route 207.80.8.0 255.255.255.0 198.216.115.1
ip route 207.80.120.0 255.255.252.0 Null0 250
ip route 207.80.120.0 255.255.255.0 198.216.115.1
ip route 207.80.121.0 255.255.255.0 198.216.115.1
ip route 207.80.122.0 255.255.255.0 198.216.115.1
ip route 207.80.123.0 255.255.255.0 198.216.115.1
no ip http server
access-list 90 permit 68.232.208.0 0.0.15.255
access-list 90 deny any
access-list 91 permit 198.216.112.0 0.0.3.255
access-list 91 permit 207.80.112.0 0.0.15.255
access-list 91 deny any
route-map OTS-out permit 10
match ip address 90
route-map Lee-out permit 10
match ip address 90
route-map I2-in permit 10
set local-preference 200
route-map Lee-I2-out permit 10
match ip address 90
route-map Lee-I2-out permit 20
match ip address 91
route-map OTS-in permit 10
set local-preference 150
line con 0
stopbits 1
line aux 0
stopbits 1
line vty 0 4
password 7 *****************
login
end
ASA (Primary)
logging permit-hostdown
mtu Outside 1500
mtu inside 1500
mtu LeeDMZ 1500
mtu management 1500
failover
failover lan unit secondary
failover lan interface failover GigabitEthernet0/3
failover link failover GigabitEthernet0/3
failover interface ip failover 172.16.1.1 255.255.255.0 standby 172.16.1.2
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any LeeDMZ
asdm image disk0:/asdm-623.bin
no asdm history enable
arp timeout 14400
global (Outside) 1 68.232.211.1-68.232.223.253
global (Outside) 1 interface
global (Outside) 1 68.232.223.254
global (Outside) 2 68.232.209.25
global (LeeDMZ) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0 tcp 16384 12000
nat (LeeDMZ) 2 access-list NAT_NEW_ISA
nat (LeeDMZ) 1 192.168.10.0 255.255.255.0
static (inside,Outside) 68.232.209.10 10.1.200.253 netmask 255.255.255.255
static (inside,LeeDMZ) 10.1.0.0 10.1.0.0 netmask 255.255.0.0
static (inside,LeeDMZ) 192.168.3.0 192.168.3.0 netmask 255.255.255.0
static (inside,Outside) 68.232.209.53 10.1.254.3 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.5 192.168.10.5 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.6 192.168.10.6 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.51 192.168.10.51 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.37 192.168.10.37 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.75 192.168.10.75 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.101 192.168.10.101 netmask 255.255.255.255
static (inside,LeeDMZ) 192.168.2.0 192.168.2.0 netmask 255.255.255.0
static (LeeDMZ,Outside) 68.232.209.102 192.168.10.102 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.38 192.168.10.38 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.23 192.168.10.23 netmask 255.255.255.255
static (inside,Outside) 68.232.209.136 10.1.7.37 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.111 192.168.10.111 netmask 255.255.255.255
static (inside,Outside) 68.232.209.8 10.1.13.8 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.103 192.168.10.103 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.92 192.168.10.92 netmask 255.255.255.255
static (inside,Outside) 68.232.209.4 10.1.6.2 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.219 192.168.10.219 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.217 192.168.10.217 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.206 192.168.10.206 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.234 192.168.10.234 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.33 192.168.10.33 netmask 255.255.255.255
static (inside,Outside) 68.232.209.246 10.1.1.246 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.11 192.168.10.11 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.100 192.168.10.100 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.120 192.168.10.120 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.70 192.168.10.70 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.36 192.168.10.36 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.50 192.168.10.50 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.22 192.168.10.22 netmask 255.255.255.255
static (inside,Outside) 68.232.209.121 10.1.1.121 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.20 192.168.10.20 netmask 255.255.255.255
static (inside,Outside) 68.232.209.203 10.1.55.203 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.15 192.168.10.15 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.25 192.168.10.25 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.55 192.168.10.55 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.143 192.168.10.143 netmask 255.255.255.255
static (LeeDMZ,Outside) 68.232.209.34 192.168.10.34 netmask 255.255.255.255
access-group out-in in interface Outside
access-group 170 in interface inside
access-group dmz in interface LeeDMZ
route Outside 0.0.0.0 0.0.0.0 68.232.208.1 1
route inside 10.1.0.0 255.255.0.0 10.1.200.1 1
route inside 192.168.2.0 255.255.255.0 10.1.200.254 1
route inside 192.168.3.0 255.255.255.0 10.1.200.254 1
route inside 192.168.5.0 255.255.255.0 10.1.200.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
url-server (inside) vendor websense host 10.1.1.66 timeout 10 protocol TCP version 1 connections 5
aaa authentication ssh console LOCAL
filter url except 10.1.4.4 255.255.255.255 0.0.0.0 0.0.0.0
filter url except 10.1.4.136 255.255.255.255 0.0.0.0 0.0.0.0
filter url except 10.1.4.30 255.255.255.255 0.0.0.0 0.0.0.0
filter url except 0.0.0.0 0.0.0.0 192.168.10.36 255.255.255.255 allow
filter url except 0.0.0.0 0.0.0.0 192.168.10.22 255.255.255.255 allow
filter url except 0.0.0.0 0.0.0.0 192.168.10.100 255.255.255.255 allow
filter url except 0.0.0.0 0.0.0.0 10.1.1.27 255.255.255.255 allow
filter url except 0.0.0.0 0.0.0.0 10.1.1.30 255.255.255.255 allow
filter url except 0.0.0.0 0.0.0.0 10.1.89.2 255.255.255.255 allow
filter url except 0.0.0.0 0.0.0.0 10.1.1.11 255.255.255.255 allow
filter url except 0.0.0.0 0.0.0.0 10.1.1.61 255.255.255.255 allow
filter url except 0.0.0.0 0.0.0.0 10.1.1.7 255.255.255.255 allow
filter url except 0.0.0.0 0.0.0.0 192.168.10.38 255.255.255.255 allow
filter url except 0.0.0.0 0.0.0.0 10.1.89.10 255.255.255.255 allow
filter url except 10.1.56.189 255.255.255.255 0.0.0.0 0.0.0.0
filter url except 10.1.4.15 255.255.255.255 0.0.0.0 0.0.0.0
filter https except 10.1.4.30 255.255.255.255 0.0.0.0 0.0.0.0
filter url except 10.1.1.0 255.255.255.0 0.0.0.0 0.0.0.0
filter url http 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 allow
filter https 443 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 allow
filter ftp 21 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 allow
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.1.4.29 255.255.255.255 management
http 10.1.4.30 255.255.255.255 management
http 10.1.4.31 255.255.255.255 management
http 10.1.4.4 255.255.255.255 management
snmp-server host inside 10.1.1.215 community *****
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
service resetoutside
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map Outside_map 1 match address Outside_1_cryptomap
crypto map Outside_map 1 set peer 216.168.57.82
crypto map Outside_map 1 set transform-set ESP-3DES-SHA
crypto map Outside_map interface Outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
subject-name CN=LEE-ASA
crl configure
crypto ca trustpoint ASDM_Lee
enrollment self
subject-name CN=LEE-ASA
crl configure
crypto isakmp enable Outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 10.1.4.29 255.255.255.255 management
telnet 10.1.4.30 255.255.255.255 management
telnet 10.1.4.31 255.255.255.255 management
telnet 10.1.4.4 255.255.255.255 management
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 LeeDMZ
ssh 0.0.0.0 0.0.0.0 management
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address 10.1.4.0 255.255.255.0
threat-detection scanning-threat shun duration 3600
threat-detection statistics host
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
url-block url-mempool 2500
url-block url-size 4
dynamic-filter updater-client enable
dynamic-filter use-database
dynamic-filter enable interface Outside
dynamic-filter drop blacklist interface Outside
dynamic-filter whitelist
address 192.168.10.0 255.255.255.0
address 10.1.1.6 255.255.255.255
address 10.1.1.2 255.255.255.255
dynamic-filter blacklist
address 46.249.59.47 255.255.255.255
address 95.215.2.8 255.255.255.255
address 94.75.201.36 255.255.255.255
ntp server 64.250.229.100 source Outside
ntp server 24.56.178.140 source Outside prefer
webvpn
username **********************************
username **************************************
username ************************************
tunnel-group 216.168.57.82 type ipsec-l2l
tunnel-group 216.168.57.82 ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect dns migrated_dns_map_1 dynamic-filter-snoop
inspect rtsp
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email
[email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:************************************: end

Unable to access DFS shares when server 1 goes down

Hello all,
I have a test domain I am building in order to prepare for a new domain we are going to create. We currently have an SBS 2003 that is reaching the end of its' life. We are going to start fresh. I have setup domain-based DFS along with DFS folder replication
for each of the folders. So far, all is working ok, up to this point.
Replication is occurring as it should and my Hyper-V test machines can connect to the mapped drives via the DFS namespace.
\\domain\namespace\target folder
However, once I shut down the primary server (SRV01) I am no longer able to access the shares. The namespace servers tab on the center window of the namespace MMC, has both SRV01 and 02 listed. I receive no errors except "Unable to connect to \\domain\namespace\target
folder because it is unavailable". It is not "failing over" to the secondary available server.
Once I power SRV01 back up, connectivity is then restored to the folders and mapped drives. Is there something I should check for, or am missing?
Any and all insight is appreciated.
Dario Garcia

Hi,
1. Run DFSUTIL /pktinfo to see if the referral target is still the primary server when it is actually down.
If so, run DFSUTIL /pktflush to flush the cached information and try to access the namespace again.
2. If 1 cannot help, whether DNS is also configged on primary server? If so, as it is down,
\\domain may not be recognized.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

Secondary DNS failing to redirect clients when Primary DNS goes down

I have a single domain with two Windows 2008 servers, DC1 (physical) and DC2 (virtual). Both servers run DNS and are GC servers, and the entire domain is on the same subnet (192.168.0.x).
All clients on the network are configured to use DC1 as primary DNS, DC2 as secondary DNS.
DHCP is enabled only on DC1. (This might be part of the issue, not sure).
The problem is that when DC1 goes down for a reboot or repair, we lose access to the internet from our clients. Trying to pull up any website results in a "Page cannot be displayed" error. DC2 is available during this time and can be
pinged from any client but does not resolve DNS requests, even if I specify it as the primary DNS server on one of my workstations. However I can log on to DC2 locally and browse the web.
Here are the results of a DCdiag /dnsall from DC2 (I bolded areas of concern):
Directory Server Diagnosis
Performing initial setup:
   * Connecting to directory service on server DC2.
   * Identified AD Forest.
   Collecting AD specific global data
   * Collecting site info.
   Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=mydomain,DC=com,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
   The previous call succeeded
   Iterating through the sites
   Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=mydomain,DC=com
   Getting ISTG and options for the site
   * Identifying all servers.
   Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=mydomain,DC=com,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
   The previous call succeeded....
   The previous call succeeded
   Iterating through the list of servers
   Getting information for the server CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=mydomain,DC=com
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   Getting information for the server CN=NTDS Settings,CN=DC2,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=mydomain,DC=com
   objectGuid obtained
   InvocationID obtained
   dnsHostname obtained
   site info obtained
   All the info for the server collected
   * Identifying all NC cross-refs.
   * Found 2 DC(s). Testing 1 of them.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\DC2
      Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... DC2 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\DC2
      Test omitted by user request: Advertising
      Test omitted by user request: CheckSecurityError
      Test omitted by user request: CutoffServers
      Test omitted by user request: FrsEvent
      Test omitted by user request: DFSREvent
      Test omitted by user request: SysVolCheck
      Test omitted by user request: KccEvent
      Test omitted by user request: KnowsOfRoleHolders
      Test omitted by user request: MachineAccount
      Test omitted by user request: NCSecDesc
      Test omitted by user request: NetLogons
      Test omitted by user request: ObjectsReplicated
      Test omitted by user request: OutboundSecureChannels
      Test omitted by user request: Replications
      Test omitted by user request: RidManager
      Test omitted by user request: Services
      Test omitted by user request: SystemLog
      Test omitted by user request: Topology
      Test omitted by user request: VerifyEnterpriseReferences
     Test omitted by user request: VerifyReferences
      Test omitted by user request: VerifyReplicas
      Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
See DNS test in enterprise tests section for results
......................... DC2 passed test DNS
   Running partition tests on : ForestDnsZones
      Test omitted by user request: CheckSDRefDom
      Test omitted by user request: CrossRefValidation
   Running partition tests on : DomainDnsZones
      Test omitted by user request: CheckSDRefDom
      Test omitted by user request: CrossRefValidation
   Running partition tests on : Schema
      Test omitted by user request: CheckSDRefDom
      Test omitted by user request: CrossRefValidation
   Running partition tests on : Configuration
      Test omitted by user request: CheckSDRefDom
      Test omitted by user request: CrossRefValidation
   Running partition tests on : mydomain
      Test omitted by user request: CheckSDRefDom
      Test omitted by user request: CrossRefValidation
   Running enterprise tests on : mydomain.com
      Starting test: DNS
Test results for domain controllers:
DC: DC2.mydomain.com
Domain: mydomain.com
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
                  Microsoftr Windows Serverr 2008 Standard
(Service Pack level: 2.0)
is supported
NETLOGON service is running
kdc service is running
DNSCACHE service is running
                  DNS service is running
DC is a DNS server
Network adapters information:
Adapter [00000006] Intel(R) PRO/1000 MT Network Connection:
MAC address is 00:0C:29:91:59:68
IP Address is static
IP address: 192.168.0.249
DNS servers:
192.168.0.105 (DC1.mydomain.com.) [Valid]
127.0.0.1 (DC2) [Valid]
The A host record(s) for this DC was found
Warning: The AAAA record for this DC was not found
[Error details: 9501 (Type: Win32 - Description: No records found for given DNS query.) - mydomain.com]
                  The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders Information:
192.168.0.105 (DC1.mydomain.com.) [Valid]
192.168.0.7 (<name unavailable>) [Invalid (unreachable)]
Error: Forwarders list has invalid forwarder: 192.168.0.7 (<name unavailable>)
TEST: Delegations (Del)
Delegation information for the zone: mydomain.com.
Delegated domain name: _msdcs.mydomain.com.
DNS server: DC1.mydomain.com. IP:192.168.0.105 [Valid]
TEST: Dynamic update (Dyn)
Test record _dcdiag_test_record added successfully in zone mydomain.com
Test record _dcdiag_test_record deleted successfully in zone mydomain.com
TEST: Records registration (RReg)
Network Adapter
[00000006] Intel(R) PRO/1000 MT Network Connection:
Matching CNAME record found at DNS server 192.168.0.105:
a32fcfbd-16bb-4697-a23d-20fc3b8c274c._msdcs.mydomain.com
Matching A record found at DNS server 192.168.0.105:
DC2.mydomain.com
Warning:
Missing AAAA record at DNS server 192.168.0.105:
DC2.mydomain.com
[Error details: 9501 (Type: Win32 - Description: No records found for given DNS query.)]
Matching SRV record found at DNS server 192.168.0.105:
_ldap._tcp.mydomain.com
Matching SRV record found at DNS server 192.168.0.105:
_ldap._tcp.ac09921d-4553-475e-b25c-059742ac0552.domains._msdcs.mydomain.com
Matching SRV record found at DNS server 192.168.0.105:
_kerberos._tcp.dc._msdcs.mydomain.com
Matching SRV record found at DNS server 192.168.0.105:
_ldap._tcp.dc._msdcs.mydomain.com
Matching SRV record found at DNS server 192.168.0.105:
_kerberos._tcp.mydomain.com
Matching SRV record found at DNS server 192.168.0.105:
_kerberos._udp.mydomain.com
Matching SRV record found at DNS server 192.168.0.105:
_kpasswd._tcp.mydomain.com
Matching SRV record found at DNS server 192.168.0.105:
_ldap._tcp.Default-First-Site-Name._sites.mydomain.com
Matching SRV record found at DNS server 192.168.0.105:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.mydomain.com
Matching SRV record found at DNS server 192.168.0.105:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.mydomain.com
Matching SRV record found at DNS server 192.168.0.105:
_kerberos._tcp.Default-First-Site-Name._sites.mydomain.com
Matching SRV record found at DNS server 192.168.0.105:
_ldap._tcp.gc._msdcs.mydomain.com
Matching A record found at DNS server 192.168.0.105:
gc._msdcs.mydomain.com
Warning:
Missing AAAA record at DNS server 192.168.0.105:
gc._msdcs.mydomain.com
[Error details: 9501 (Type: Win32 - Description: No records found for given DNS query.)]
Matching SRV record found at DNS server 192.168.0.105:
_gc._tcp.Default-First-Site-Name._sites.mydomain.com
Matching SRV record found at DNS server 192.168.0.105:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.mydomain.com
Matching CNAME record found at DNS server 192.168.0.249:
        a32fcfbd-16bb-4697-a23d-20fc3b8c274c._msdcs.mydomain.com
Matching A record found at DNS server 192.168.0.249:
DC2.mydomain.com
Warning:
Missing AAAA record at DNS server 192.168.0.249:
DC2.mydomain.com
[Error details: 9501 (Type: Win32 - Description: No records found for given DNS query.)]
Matching SRV record found at DNS server 192.168.0.249:
_ldap._tcp.mydomain.com
Matching SRV record found at DNS server 192.168.0.249:
_ldap._tcp.ac09921d-4553-475e-b25c-059742ac0552.domains._msdcs.mydomain.com
             Matching
SRV record found at DNS server 192.168.0.249:
_kerberos._tcp.dc._msdcs.mydomain.com
Matching SRV record found at DNS server 192.168.0.249:
_ldap._tcp.dc._msdcs.mydomain.com
Matching SRV record found at DNS server 192.168.0.249:
_kerberos._tcp.mydomain.com
Matching SRV record found at DNS server 192.168.0.249:
_kerberos._udp.mydomain.com
Matching SRV record found at DNS server 192.168.0.249:
_kpasswd._tcp.mydomain.com
Matching SRV record found at DNS server 192.168.0.249:
_ldap._tcp.Default-First-Site-Name._sites.mydomain.com
Matching SRV record found at DNS server 192.168.0.249:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.mydomain.com
           Matching
SRV record found at DNS server 192.168.0.249:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.mydomain.com
Matching SRV record found at DNS server 192.168.0.249:
_kerberos._tcp.Default-First-Site-Name._sites.mydomain.com
Matching SRV record found at DNS server 192.168.0.249:
_ldap._tcp.gc._msdcs.mydomain.com
Matching A record found at DNS server 192.168.0.249:
gc._msdcs.mydomain.com
Warning:
Missing AAAA record at DNS server 192.168.0.249:
gc._msdcs.mydomain.com
[Error details: 9501 (Type: Win32 - Description: No records found for given DNS query.)]
Matching SRV record found at DNS server 192.168.0.249:
_gc._tcp.Default-First-Site-Name._sites.mydomain.com
Matching SRV record found at DNS server 192.168.0.249:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.mydomain.com
Warning: Record Registrations not found in some network adapters
TEST: External name resolution (Ext)
Internet name www.microsoft.com was resolved successfully
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 192.168.0.7 (<name unavailable>)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 192.168.0.7
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 192.168.0.105 (DC1.mydomain.com.)
All tests passed on this DNS server
Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
DNS delegation for the domain _msdcs.mydomain.com. is operational on IP 192.168.0.105
DNS server: 192.168.0.249 (DC2)
All tests passed on this DNS server
Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: mydomain.com
DC2
PASS WARN FAIL PASS PASS WARN PASS
......................... mydomain.com failed test DNS
      Test omitted by user request: LocatorCheck
      Test omitted by user request: Intersite

Looks like it may be trying to forward to a machine that's down (DC1 and another 192.168.0.7) and root hints aren't available.
Check out this article:
http://technet.microsoft.com/en-us/library/ff807391(v=ws.10).aspx
See if you can enable DNS access through the firewall to the Internet if it's not already available. Try to match whatever forwarder settings are on DC1, or remove them entirely and let the server resolve DNS from Internet root servers. Alternativly,
you could change your forwarder to a public DNS server you have access to, your ISP should supply this or you could test with something common like 4.2.2.2.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Mail - when replied mail mail still open

In Mail when you open a message and reply the orginal message is still open behind. Means when you have sent the reply ypu have to close the original mail manually. Use to be automatic closed.

On your iPad, open your mail and TAP & HOLD on the Keynote Attachment, then
Select Open In > Keynote. This will open your file in Keynote on your iPad

"Cannot Get Mail" When Checking Mail on Yahoo Account after 1.1.2 update

I recently updated iPhone to 1.1.2 and now cannot get yahoo email. 1.1.1 worked fine. When I attempted to check for e-mail on iPhone it returns error "Cannot get mail: The user name or password for "imap.apple.mail.yahoo.com" is incorrect." I have checked my username and password and I am positive that it is correct. I just logged onto the yahoo mail website with the same username and password that I entered into my iPhone. BTW, I have only alphas for a password and I also tried updating my password online and then modifying the iPhone to match. It authenicates the password when updating the account but will receives the same error above when attempting to update e-mail. I just have the standard yahoo account which shouldn't matter because it is the one that i used on 1.1.1. I have tried everything i can think of and just cant seem to get it to work so I'm hoping someone here can help me out. Thanks

I have a new iPhone with 1.1.2 and have this same problem. My Yahoo mail is set up correctly, and I can send mail from the mail client, which shows up when I check my 'sent' folder on yahoo using the browser interface from my computer.
I can't check mail - I get the "The user name or password for "imap.apple.mail.yahoo.com" is incorrect. Since I can send email from the iphone, and then see what I sent on both my work email and in my 'sent' folder, it's not a user or pw setup problem.
I tried turning it off and on and that didn't do it. I have a free yahoo account, so I believe I have to use the Y! option.

Alert Monitoring and Notification Mails

I have a requirement to configure CCMS in XI system in such a way that the alerts trigger mails to the outlook users.
This is required in J2EE engine also.
Please tell the T-Codes and Steps.
Thanks

Hi Asad,
When your CCMS is not configured you can only do individual monitoring.
To configure the same you must decide which system is to be the central system for the SCR.
To know what SCR is and to know more about it please go through this link.
https://help.sap.com/saphelp_nw04s/helpdata/en/1e/ec9e38f0d92936e10000009b38f8cf/content.htm
After doing the same please follow these steps.
Log on to the system that is to contain the central repository.
- Choose CCMS ® Configuration ® Alert Monitor, or call transaction RZ21.
- Choose Technical Infrastructure ® System Repository ® Set Repository Role.
- The system displays the Set Repository Role in Central System Administration screen. Choose Central Repository.
And also go through the following links. This I guess will help you solve your problem and I guess it answers your question.
https://help.sap.com/saphelp_nw04s/helpdata/en/e5/15a0380d134f6fe10000009b38f8cf/content.htm
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Regards,
Abhy
PS: Award points for helpful answers.

Alert Mail when Notification Mailer goes down

Similar Messages

Maybe you are looking for