Alert Messages on backup/restore in db6cockpit

Hi All,
When i executed t code db6cockpit, it shows me an alert in backup/restore tree.
1. Database Backup
           database backup
                 last succesful backup - the last database backup is too far back in time
         log files
                userexit status - the user exit is not active
                missing log files - log files are missing or have not been archived successfully.
Please advise me....
Note: we schedule a weekly offline backup.

hi,
1) First you have to change db2 configuration parameter in DB.
In configuration you have to enable " First log archive method (LOGARCHMETH1)" this prameter. then take offline backup.
db2 connect to <DBSID>
db2 get db cfg
db2 update cfg <Parametername> <Parameter>
then take offline parameter.

Similar Messages

How do I get rid of the iCloud Backup alert message? I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset. Thanks

How do I get rid of the iCloud Backup alert message? I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset. Thanks

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

IPhone 4 will not restore my backup to iOS7, I am getting the message your backup was corrupt or is not compatible with the iPhone that is beinng restored

iPhone 4 will not restore my backup to iOS7, I am getting the message your backup was corrupt or is not compatible with the iPhone that is beinng restored

Restore it as a new device first, then try again. If it still won't work, you're hosed, unless you can get hold of the old device and try backing it up again.

HT5654 I have the lastest itunes software but I'm trying to restore a backup onto the new iphone 5s and I get an error message and cannot restore? Any advice

I have the lastest itunes software but I'm trying to restore a backup onto the new iphone 5s and I get an error message and cannot restore? Any advice

If iTunes is otherwise working properly start with TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, otherwise move on to Troubleshooting issues with iTunes for Windows updates.
tt2

HT1766 I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!! HELP! iCloud backup/restore did not work

I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!! HELP! iCloud backup/restore did not work either! How can I resolve this problem to restore from back up.

If you're not a developer then you really should not have upgraded.
I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

TS4036 I tried to restore my iPad from the cloud backup but the iCloud returned the following message 'no backup available'? This after happened after I created the backup today and the same was confirmed at the Apple Store attendant

I tried to restore my iPad from the cloud backup but the iCloud returned the following message 'no backup available'? This after happened after I created the backup today and the same was confirmed at the Apple Store attendant

Check the console app to see if there are any error messages. I had one app showing an issue (Pet Hotel) the error was (truncated):
ERROR: Restore message response: 102 rename error: File name too long (63) at path "/var/mobile/Library/SafeHarbor/com.pocketgems.tappethotel/Container/Documents/ savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHis tory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGa meHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/sa vedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHisto ry/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGame History/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/save dGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory /savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHi story/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedG ameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/s avedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHist ory/savedGameHistory/1313349538-pocket_gems_crash_report.txt" (MBErrorDomain/102)
I manually snyc'ed that particular app and then re-ran the restore and am now the proud owner of a working iphone. Not sure it is the same problem or app but looking in the console was the key!

How do i restore sms messages from backup

I had an appointment at the genius bar today and they restored my iphone 4 to factory settings. i was told all my texts (SMS and iMessage) were backed up. I was told to open an iTunes and setup the iPhone as a "new phone" rather than restore from my backup file. Does anyone know how I can restore just the SMS/iMessage part of the backup? thanks!

Actually, there's a way to restore deleted SMS directly from iPhone 5/4S/4/3GS.
If you've ever synced your iPhone with iTunes before, there is also another way: to recover from iTunes backup for all iPhones including iPhone 5 and iphone4S. You just need the help from an iPhone text message recovery tool.
Part 1: Directly recover deleted photos from iPhone 5/4S/4/3GS
1:Connect your iPhone to the computer
At first, please connect your iPhone to the computer and run the program after installing it.
2:Enter your iPhone's system and scan it (iPhone 5/4S users can skip this step)
After downloading the plug-in, you need to get into the device's scanning mode before scanning. You can follow the steps below:
1)Hold your iPhone and click the "Start" button.
2)Pressing the "Power" and "Home" buttons simultaneously for 10 seconds.
3)After 10 seconds, release the "Power" button, but keep holding "Home" for another 15 seconds.
3: Preview and recover iPhone messages
When the scan is completed, choose "Messages" to preview the detailed content. Mark those you want and click "Recover" to save them on your compute with one click.
Part 2: Scan and extract iTunes backup to recover iPhone SMS
1: Scan your iTunes backup for iPhone 5/4S/4/3GS
After installing and running the program, move to "Recover from iTunes Backup File" and you'll get the interface as follows. All your iTunes backup files have been found and displayed. Choose the one for your iPhone and click the"Start Scan" button.
2: Preview and recover iPhone SMS
Only need to check the "Messages" option and hit the "Recover" to save all the messages on your computer.
3:Do backup well
In order to save your important SMS messages, immediate backup is very useful and important. Please remember to backup them on your computer .

My ipad was is displaying an alert message " A wi-fi connection is required to download your apps and media". So it has been connected to the internet over night and this morning but is still displaying the alert message and it won't go away. what to do?

Hi,
My name is Norbert. I am having some difficulties restoring my icloud back up. My ipad was doing an icloud back up and the alert message displayed on the ipad after my internet was interrupted "A wi-fi connection is required to download your apps and media".
I got the internet working, my ipad is receiving internet network but the alert message is still displayed on the ipad and won't go away, to make matters worse the ipad is frozen and i can't do anything.
Please can anyone with a similar experience tell me what to do in this situation?
Thank you

Welcome to the Apple Community.
Have you tried a hard restart. Press the on/off button and homescreen buttons together until the device shuts down.

Windows Vista 64-bit and the Backup & Restore....

I've recently found out that Backup & Restore is not supported by Vista 64-bit. So, all the backups that did not complete and has the error message (0x8007002), all the backups are of no use. All of my documents, pictures, music, original
music materials, etc., are all gone. Can't even open the error-ed backups! Can my system be restore to it's original settings before the backup fiasco? I am at a lost to what can be done!
Sincerely (feeling hopeless)
Rapport1951

Please post in the appropriate Vista forum found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=windowsvistaitpro
This is a Windows 7 forum.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Ipad won't start; trying to restore thru itunes, but get the message - can't restore because ipad is not set up. What do I do now?

Ipad won't start; trying to restore thru itunes, but get the message - can't restore because ipad is not set up. It was set up and has been in use for about a year. What do I do now?

I Have seen people report this issue when they try to sync their devices but in never seen it when trying to restore an unresponsive iPad. I would sguggest trying recovery mode now.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
This procedure will totally erase the iPad so I hope that you have a backup that you can restore from....assuming that it works, that is.

Backup/Restore from PC Suite with N71 worthless

Hi,
I have used Backup from PC Suite (Version 6.82.22.0) to backup my N71 data before I gave the N71 to a repair shop. The N71 camera was not working.
After four weeks I got a N71 replacement. A brand new N71 with a different serial number which is not good because some S60 apps now no longer work.
But anyway the real surprise I got was after I run Restore from PC Suite to get all data back. The Restore finished without any error but almost nothing useful was restored!!
No Contacts, No Messages, No phone Setup (Themes, Bluetooth Config, Apps).
Huh???
Is this really how Backup/Restore from PC Suite with a Symbian S60 3rd Nokia N71 us supposed to work??
If yes, than Backup is utterly worthless!!
I am not aware that I did something wrong. I have used Backup regularly and never got any error messages.
But it is painfully obvious that the most important data from the phone are not saved!
All the Restore did was restore some audio and image files and the Notes contents.
Regards,
Gagome

you can check the backup log for the details of the backuped content. or try this tool to view the content of the .nbu.
What's the law of the jungle?

Alert message 1611

Could someone help me to exit from a recovery mode for my iphone? I've searched through many website and tried many ways but still can't have the problem fixed.
An alert message 1611 comes out when I wanted to get an updated itunes. I tried re-booting my pc. I tried unintalled itunes and all other Apple softwares and reinstalled them. I tried restoring my iphone. None of these works.
I also tried downloading iREB and LibUSB as demonstrated in Youtube, but found no way to download libusb-2in32.exe.
Please help...

Hi,
Disable anti virus software and turn off the Firewall on your PC.
Help here: Update and restore alert messages on iPhone, iPad, and iPod touch including Error 1611
Carolyn

Erase and sync issues (backup/restore)

Hello.
I have an issue with the backup/restore with my iPhone.
Sometimes, it is difficult to find an answer that fits your problem exactly on the forum! Lots of good stuff though!
This post will be little longer than normal, but I need to get all the facts on the table.
I'll try to keep this brief. Please hear me out!
From another post ...
https://discussions.apple.com/message/12273122
Kwopau stated ...
if you do a restore, you only have 2 options, Restore as new, meaning nothing will go on it
and you will just have to start fresh and no contacts will go in there.
The other option is "Restore from Back up _______" it will completely restore your phone
from your last back up and everything will be on there.
End of quote ...
Here is my situation.
I have a 3g 16GB iPhone.
I am still running IOS 3 (not IOS 4).
I do not use sync. I manually manage the music and books with iTunes.
I have an HP laptop.
A while ago, I had to completely rebuild the computer.
The computer has a new computer and user name (I don't know if this matters in iTune/iPhone matchup)?
I have not been able to connect the iPhone since then.
Let me rephrase that.
I can connect with iTunes. I can see all that is on the iPhone.
When I try to add or delete music or books on the iPhone with iTunes or set the manually manage check box, I get the following message ...
The iPhone "myname's iPhone" is synced with another iTunes library.
Do you want to erase this iPhone and sync with the this iTunes library.
Most commands appear to be grayed out, I can't add or delete anything.
I do not have anything in current iTunes library at the moment.
My fear is this.
If I do the erase and sync as suggested (iPhone message above) to the iPhone and then use the new iTunes library, will I be able to use the backup (I just created) to restore to the iPhone that I just reset?
If so, will it have contacts and all the other stuff?
I can afford to lose the music and books, and perhaps the apps on the iPhone.
I cannot afford to lose my contact list.
I need to find another way to backup the contact list, Outlook, etc?
If there other posts relative to this, please point me to them.
I am afraid to pull the trigger for fear that iTunes will not recognize the iPhone after the erase and sync and then not allow me to restore.
Perhaps someone can put my mind at ease and convince me that it will all be good if I proceed!
Thanks for you time and help in this matter ...
Bob

Do you know how to transfer purchases? Connect the iPad to the PC and launch iTunes. Click on the iPad nema on the left side of the iTunes window to select it. Then go to File>Transfer Purchases. That should put all of your purchased iPad content into the iTunes library on the PC.
Here are instructions in a very short, easy to follow article.
Transfer iTunes Library to a new computer
This discussion will be helpful to show you how to make the PC work wTunes from the iPad.
https://discussions.apple.com/thread/3305461
This is the discussion from which I borrowed the some of the text in my post from the discussion above.
https://discussions.apple.com/message/11527071#11527071
What puzzles me is that if you had updated with the PC, I would have thought that you would have backed up and synced with that PC as well, but read the articles and instructions and post back with questions.
You can email the pdf files to the iPad, or use iOS file sharing, and open and save them in iBooks or another pdf reader app, but start with getting your stuff onto the PC.

Oracle 11GR1, Backup / Restore etc.

Hi together
I'm looking for a DotNet API to control status messages, exception handling and so on in Oracle 11GR1.
Thanks for your Help

Rman is part of the database, and is the backup/restore tool. There is no other way then to use rman (in a normal deployment), except a cold backup (file copy).

System Copy/ Oracle Backup/Restore as part of migrating from 32 to 64-bit

Source system (I386): R3E47 Ext Set 2.00 SAP_BASIS 620 Kernel 640 Windows 2000, Oracle 10.2.0.4, non-unicode
Target system (x86-64/AMD64): R3E47 Ext Set 2.00 SAP_BASIS 620 Kernel 640 Windows 2000 Oracle 10.2.0.4, non-unicode
Am using method System Copy/ Oracle Backup/Restore to migrate from 32 to 64 bit (HOM System Copy).
Actions on source system:
a) Upgrade from 9.2.0.7 to Oracle 10.2.0.4
b) Used ora_br_copy.bat to generate CONTROL.SQL and init<sid>.ora
c) Switched logfiles
d) Performed offline backup
Actions on target system:
a) Installed Oracle 10.2.0.1 and patched it to 10.2.0.4
b) Used CD 51033746 "6.20/6.40 based products Installation Master (Edition May 2008)" to install the CI
c) Started installation of the DB instance selecting System Copy/ Oracle Backup/Restore (same <SID> for source and target systems)
Relevant input parameters used:
Database schema: SAPR3
Database character set: US7ASCII
d) When SAPINST stopped to allow for restoring of datafiles, logs and init<sid.ora>:
- copied datafiles and logs to the usual place
- copied CONTROL.SQL (edited to include utilrp.sql and utlrp.sql for the migration from 32 to 64) to the DB-instance intallation . directory.
- copied generated init<SID>.ora to the <ORACLE_HOME>\database
e) Resumed SAPINST.
David Byrne in a previous post suggested: "check your oracle alert file in case there are errors there you may need to update the word size for the 64bit install. Errors like this in the oracle alert file would suggest that.,
ORA-12012
ORA-06544: PL/SQL: internal error, arguments: [ORA-06544: PL/SQL: internal error, arguments: 56319], [, ], [, ], [, ], [
ORA-06553"
Well, I am getting ORA-06553: PLS-801: internal error [56319] but then my edited CONTROL.SQL (which is mainly a CREATE CONTROLFILE as it would be obtained with a ...BACKUP CONTROLFILE TO TRACE) includes at the end this:
shutdown immediate
startup upgrade
spool utlirp.log
@?/rdbms/admin/utlirp.sql
spool off
Shutdown immediate
Startup
Spool utlrp.log
@?/rdbms/admin/utlrp.sql
Spool off
exit
which is supposed to do just that... (I think)
Help, anyone?

> Trying to cheer me up, are you?
No
> It is NOT free that reorganization! Quite expensive, actually, paid for in time! But you're right... the database needed a reorg anyway :-\
True, not "free" - it takes time but the data will be nicely aligned then
> And why would I have to reconfigure all those 10.2 features? Everything's either in the database or init<sid>.ora, ain't it? And my database is a pretty 10.2.0.4 with all those nice features already activated...
No - not really auotmatically if you upgraded from 9.2 And "init<SID>.ora" is past, you nowadays use "spfile" If, of course, e. g. Automatic Undo was activated in 9.2 then it's there of course in 10.2 too.
> One sticky point... I haven't really read the r3load procedure yet and I will before I import, but... I would say I don't have to do anything about the 32->64 bit, right? I mean, it should behave properly while reloading on 64-bit...
The exported content is about 10 % of the size of the system, it's database and OS independent so yes, you can import it nicely on 32bit. Another tip: make sure you don't just use the default configurations for R3load, it will take a HUGE amount of time. Use the package splitter (builtin-in in sapinst) so you get a much higher parallelism when importing.
Markus

Alert Messages on backup/restore in db6cockpit

Similar Messages

Maybe you are looking for