Alert missing data, need some help.
We are running an alert that displays requisitions that are generated against a federal fund. The req's will appear daily until the become PO's and then the req will be displayed for the first day with the po number then it goes away. I finally got the code to work properly, testing it in TOAD and SQLPlus. When I run the same code using the alerts, it is not returning the req's that became po's.
Has anyone experienced this problem? (Code that runs correctly in TOAD/SQLPlus but not through the alerts)
I would be grateful for any input. Thanks!
It was a periodic alert. I got it to work I just went about it another way in the coding. Weird, but thanks!
Similar Messages
-
Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Thoughts???
thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess.
That would convenient, but sadly it is not the case. Sorry!
Either way your welcome and best of luck!
B-rock -
The backup disk image “/Volumes/Data/David Witkowski’s Mac Pro.sparsebundle” is already in use. Whenever Time Machine starts to backup to Time Capsuel I get the previous error message Where can I find this disk image?. I need some help to fix this.
Thanks,
David WThere are multiple answers and solutions if you look just to the right under the heading of More Like This.
-
I bought a new song on itunes, but for some reason it won't play on my itunes library or Ipod. It skips to another song. Need some help on this if you can spare your time.
Hello
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Best of luck,
Mario -
Need some Help configuring sip
Hi all ! ,
Im kind off new to sip calling and cisco telephony , but here goes ,: i have a 2821 router with CME installed
IOS : C2800NM-IPVOICEK9-M
Sofware version : 15.1(4)M4 / CME 8.6
Attached to GE0/0 is a CISCO 3750 switch
GEO - consisfts of 3 VLANS , the native
172.22.1.X
172.22.100.X VOICE
172.22.101.X DATA
my tftpserver = 172.22.1.150
i need some help configuring a sip trunk , i have 10 testing phonenumbers from vodafone , but i do not know where to start to get this working
i have tried
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml
but im getting stuck with what to fill in where .. is there anyone form NL whom has the same setup ? or similar ? or can give me some guidance on how to make the test callsok.. here goes
Building configuration...
Current configuration : 9721 bytes
! Last configuration change at 15:26:14 CET Thu Jan 2 2014
! NVRAM config last updated at 15:26:14 CET Thu Jan 2 2014
! NVRAM config last updated at 15:26:14 CET Thu Jan 2 2014
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
no aaa new-model
clock timezone CET 1 0
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-select 1 E1 0/0/0
network-clock-select 2 E1 0/0/1
dot11 syslog
ip source-route
ip cef
ip dhcp pool VOICE
network 172.22.100.0 255.255.255.0
option 150 ip 172.22.1.150
default-router 172.22.100.1
ip dhcp pool DATA
network 172.22.101.0 255.255.255.0
default-router 172.22.101.1
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
isdn switch-type primary-net5
voice service voip
ip address trusted list
ipv4 172.22.1.50
ipv4 172.22.1.51
ipv4 172.22.100.1
ipv4 172.22.101.1
ipv4 62.140.159.225
callmonitor
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
sip
registrar server expires max 3600 min 3600
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice register global
voice translation-rule 1
rule 1 /5123781291/ /601/
rule 2 /5123781290/ /600/
voice translation-rule 2
rule 1 /^112$/ /112/
voice translation-rule 3
rule 1 /^.*/ /0262610290/
voice translation-rule 4
rule 2 /600/ /5123788000/
rule 3 /601/ /5123788001/
rule 4 /^2(..)$/ /51237812\1/
voice translation-profile CUE_Voicemail/AutoAttendant
translate called 1
voice translation-profile PSTN_CallForwarding
translate redirect-target 4
translate redirect-called 4
voice translation-profile PSTN_Outgoing
translate calling 3
translate called 2
translate redirect-target 4
translate redirect-called 4
voice-card 0
crypto pki token default removal timeout 0
controller E1 0/0/0
framing NO-CRC4
pri-group timeslots 1-31
controller E1 0/0/1
framing NO-CRC4
pri-group timeslots 1-31
ip ftp username cisco
ip ftp password cisco123
ip tftp source-interface GigabitEthernet0/0.1
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
no keepalive
interface GigabitEthernet0/0.1
encapsulation dot1Q 1 native
ip address 172.22.1.51 255.255.255.0
interface GigabitEthernet0/0.20
encapsulation dot1Q 20
ip address 172.22.101.1 255.255.255.0
interface GigabitEthernet0/0.100
encapsulation dot1Q 100
ip address 172.22.100.1 255.255.255.0
interface GigabitEthernet0/1
no ip address
shutdown
duplex full
speed 100
interface Serial0/0/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface Serial0/0/1:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http max-connections 16
ip http path flash:gui
ip route 0.0.0.0 0.0.0.0 172.22.1.50
tftp-server flash:7941/apps41.8-4-1-23.sbn alias apps41.8-4-1-23.sbn
tftp-server flash:7941/cnu41.8-4-1-23.sbn alias cnu41.8-4-1-23.sbn
tftp-server flash:7941/dsp41.8-4-1-23.sbn alias dsp41.8-4-1-23.sbn
tftp-server flash:7941/jar41sccp.8-4-1-23.sbn alias jar41sccp.8-4-1-23.sbn
tftp-server flash:7941/cvm41sccp.8-4-1-23.sbn alias cvm41sccp.8-4-1-23.sbn
tftp-server flash:7941/SCCP41.8-4-2S.loads alias SCCP41.8-4-2S.loads
tftp-server flash:7941/term41.default.loads alias term41.default.loads
tftp-server debug
control-plane
voice-port 0/0/0:15
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/0/1:15
voice-port 2/0/0
voice-port 2/0/1
voice-port 2/0/2
voice-port 2/0/3
voice-port 2/0/4
voice-port 2/0/5
voice-port 2/0/6
voice-port 2/0/7
voice-port 2/0/8
voice-port 2/0/9
voice-port 2/0/10
voice-port 2/0/11
voice-port 2/0/12
voice-port 2/0/13
voice-port 2/0/14
voice-port 2/0/15
voice-port 2/0/16
voice-port 2/0/17
voice-port 2/0/18
voice-port 2/0/19
voice-port 2/0/20
voice-port 2/0/21
voice-port 2/0/22
voice-port 2/0/23
mgcp profile default
dial-peer voice 1 voip
description **Incomming Call from SIP Trunk**
translation-profile incoming CUE_Voicemail/AutoAttendant
session protocol sipv2
session target ipv4:172.22.1.50
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 2 voip
description **Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9........
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 3 voip
description **Outgoing Call to SIP Trunk **
translation-profile outgoing PSTN_Outgoing
destination-pattern 9[2-9]..[2-9]......
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 4 voip
description **Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9[0-1][2-9]..[2-9]......
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 5 voip
description **911 Outgoing Call to SIP trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 911
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 6 voip
description **Emergency Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9911
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 7 voip
description **911/411 Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9[2-9]11
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 8 voip
description **International Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9011T
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 9 voip
description **Star Code to SIP Trunk**
destination-pattern *..
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 10 voip
description **CUE Voicemail**
translation-profile outgoing PSTN_CallForwarding
destination-pattern 600
b2bua
session protocol sipv2
session target ipv4:172.22.1.155
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 11 voip
description **CUE Auto Attendant**
translation-profile outgoing PSTN_CallForwarding
destination-pattern 601
b2bua
session protocol sipv2
session target ipv4:172.22.1.155
dtmf-relay sip-notify
codec g711ulaw
no vad
sip-ua
authentication username 0262610290 password 7 15020A1F173D24362C realm 62.140.1
59.225
authentication username 0262610290 password 7 021605481811003348
no remote-party-id
retry invite 2
retry register 10
timers connect 100
registrar ipv4:62.140.159.225 expires 3600
sip-server ipv4:62.140.159.224
host-registrar
telephony-service
max-ephones 58
max-dn 192
ip source-address 172.22.100.1 port 2000
calling-number initiator
system message testing
cnf-file location TFTP tftp://172.22.1.150/
load 7960-7940 P00307020200.loads
load 7941 SCCP41.8-4-2S.loads
load 7941GE SCCP41.8-4-2S
time-format 24
dialplan-pattern 1 26261029.. extension-length 3 extension-pattern 9..
voicemail 600
max-conferences 12 gain -6
call-forward pattern 9.T
moh music-on-hold.au
web admin system name admin password password
dn-webedit
time-webedit
transfer-system full-consult
secondary-dialtone 9
directory entry 1 101 name 101
create cnf-files version-stamp 7960 Jan 02 2014 08:40:49
ephone-dn 1
number 290 secondary 0262610290
name Phone 1
hold-alert 30 originator
ephone-dn 2
number 291 secondary 0262610291
name phone 2
hold-alert 30 originator
ephone-dn 3
number 292 secondary 0262610292
name Phone 3
hold-alert 30 originator
ephone-dn 4
number 293 secondary 0262610293
name Phone 4
hold-alert 30 originator
ephone-dn 5
number 294 secondary 0262610294
label Phone 5
hold-alert 30 originator
ephone 1
mac-address 0019.E88F.3BDD
button 1:1
ephone 2
mac-address 001E.4A92.0A27
type 7961
button 1:2
ephone 3
mac-address 0012.43F5.03AF
button 1:3
ephone 4
mac-address 000F.F7AC.502A
button 1:4
ephone 5
mac-address 0019.E851.090A
button 1:5
line con 0
line aux 0
line vty 0 4
login
transport input all
scheduler allocate 20000 1000
ntp master
end -
TS1702 I need some help the apps were downloading slowly
The apps downloaded but it didn't cause it's stuck in downloading mode what should I do?
The iOS 6 update didn't work.
Please I need some help.
The apps didn't download.
Talking Angela and Ginger didn't download.
Talking Santa didn't update.Try moving the existing backup file to a safe location so that iTunes has to create an entire new file. The backup file is located here. You can delete that backup once you get a successfull backup.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory. -
Need some help...in need of a different way.
Hi, I'm new to Java and need some help. I have 2 questions that are similar in nature.
1st Question:
In a program that I'm writting I have a do-while loop which at the end brings up a dialog box that asks the user to enter '1' for 'Yes' or '2' for 'No' to continue.
I would rather have the option of having the user enter 'y' or 'Y' for Yes and 'n' or 'N' for No.
Here is what I have currently:
int x;
String data;
do{
//Blah blah code
data = JOptionPane.showInputDialog(null, "Enter 1 for Yes or 2 for No");
x = Integer.parseInt(data);
}while(x == 1);
x++;
2nd Question:
In another part of my program I have a Case statement that asks the user to enter a number or a letter from a list of choices. They can enter '2' , 't', or 'T'.
I would rather have all of this in an if-else chain. Is this possibe? if so, how would I do it.
Thanks.I would rather have the option of having the user enter 'y' or 'Y' for Yes and 'n' or
'N' for No. You can test the first letter of whatever the user inputs like this:String response = JOptionPane.showInputDialog(null, "Enter (Y)es or (N)o");
response = response.toLowerCase();
if(response.startsWith("y")) {
// the user entered something starting with y
} else if(response.startsWith("n")) {
// the user entered something starting with n
} else {
// what are you going to do?
}JOptionPane also has versions that would allow yes/no buttons. Eg, see:
http://java.sun.com/docs/books/tutorial/uiswing/components/dialog.html -
Please I need some help with a table
Hi All
I need some help with a table.
My table needs to hold prices that the user can update.
Also has a total of the column.
my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
I have tried using but as I need to set the toal with something like total
totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
Can any one please advise on some way I can get this to work ?
Thanks for reading
CraigHi there camickr
thanks for the help the other day
this is my full code....
package printing;
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
import java.text.DecimalFormat;
public class tablePanel
extends JDialog implements Printable {
BorderLayout borderLayout1 = new BorderLayout();
private boolean printing = false;
private Dialog1 dialog;
JPanel jPanel = new JPanel();
JTable table;
JScrollPane scrollPane1 = new JScrollPane();
DefaultTableModel model;
private String[] columnNames = {
private Object[][] data;
private String selectTotal;
private double total;
public tablePanel(Dialog1 dp) {
dp = dialog;
try {
jbInit();
catch (Exception exception) {
exception.printStackTrace();
public tablePanel() {
try {
jbInit();
catch (Exception exception) {
exception.printStackTrace();
private void jbInit() throws Exception {
jPanel.setLayout(borderLayout1);
scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
this.add(jPanel);
jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
scrollPane1.getViewport().add(table);
jPanel.setOpaque(true);
newTable();
addToModel();
addRows();
setTotal();
public static void main(String[] args) {
tablePanel tablePanel = new tablePanel();
tablePanel.pack();
tablePanel.setVisible(true);
public void setTotal() {
total = 0;
int i = table.getRowCount();
for (i = 0; i < table.getRowCount(); i++) {
String name = (String) table.getValueAt(i, 1);
if (!"".equals(name)) {
if (i != table.getRowCount() - 1) {
double dt = Double.parseDouble(name);
total = total + dt;
String str = Double.toString(total);
table.setValueAt(str, table.getRowCount() - 1, 1);
super.repaint();
public void newTable() {
model = new DefaultTableModel(data, columnNames) {
table = new JTable() {
public Component prepareRenderer(TableCellRenderer renderer,
int row, int col) {
Component c = super.prepareRenderer(renderer, row, col);
if (printing) {
c.setBackground(getBackground());
else {
if (row % 2 == 1 && !isCellSelected(row, col)) {
c.setBackground(getBackground());
else {
c.setBackground(new Color(227, 239, 250));
if (isCellSelected(row, col)) {
c.setBackground(new Color(190, 220, 250));
return c;
table.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
if (e.getClickCount() == 2) {
if (e.getClickCount() == 1) {
if (table.getSelectedColumn() == 1) {
table.setTableHeader(null);
table.setModel(model);
scrollPane1.getViewport().add(table);
table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
public void addToModel() {
Object[] data = {
"Price", "5800"};
model.addRow(data);
public void addRows() {
int rows = 20;
for (int i = 0; i < rows; i++) {
Object[] data = {
model.addRow(data);
public void printOut() {
PrinterJob pj = PrinterJob.getPrinterJob();
pj.setPrintable(tablePanel.this);
pj.printDialog();
try {
pj.print();
catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
Graphics2D g2 = (Graphics2D) g;
g2.setColor(Color.black);
int fontHeight = g2.getFontMetrics().getHeight();
int fontDesent = g2.getFontMetrics().getDescent();
//leave room for page number
double pageHeight = pageFormat.getImageableHeight() - fontHeight;
double pageWidth = pageFormat.getImageableWidth();
double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
double scale = 1;
if (tableWidth >= pageWidth) {
scale = pageWidth / tableWidth;
double headerHeightOnPage = 16.0;
//double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
//System.out.println("this is the hedder heigth " + headerHeightOnPage);
double tableWidthOnPage = tableWidth * scale;
double oneRowHeight = (table.getRowHeight() + table.getRowMargin()) * scale;
int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
double pageHeightForTable = oneRowHeight *numRowsOnAPage;
int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
if (pageIndex >= totalNumPages) {
return NO_SUCH_PAGE;
g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
//bottom center
g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages), (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
g2.translate(0f, headerHeightOnPage);
g2.translate(0f, -pageIndex * pageHeightForTable);
//If this piece of the table is smaller
//than the size available,
//clip to the appropriate bounds.
if (pageIndex + 1 == totalNumPages) {
int lastRowPrinted =
numRowsOnAPage * pageIndex;
int numRowsLeft =
table.getRowCount()
- lastRowPrinted;
g2.setClip(0,
(int) (pageHeightForTable * pageIndex),
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(oneRowHeight *
numRowsLeft));
//else clip to the entire area available.
else {
g2.setClip(0,
(int) (pageHeightForTable * pageIndex),
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(pageHeightForTable));
g2.scale(scale, scale);
printing = true;
try {
table.paint(g2);
finally {
printing = false;
//tableView.paint(g2);
g2.scale(1 / scale, 1 / scale);
g2.translate(0f, pageIndex * pageHeightForTable);
g2.translate(0f, -headerHeightOnPage);
g2.setClip(0, 0,
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(headerHeightOnPage));
g2.scale(scale, scale);
//table.getTableHeader().paint(g2);
//paint header at top
return Printable.PAGE_EXISTS;
class TableRenderDollar extends DefaultTableCellRenderer{
public Component getTableCellRendererComponent(
JTable table,
Object value,
boolean isSelected,
boolean isFocused,
int row, int column) {
setHorizontalAlignment(SwingConstants.RIGHT);
Component component = super.getTableCellRendererComponent(
table,
value,
isSelected,
isFocused,
row,
column);
if( value == null || value .equals("")){
( (JLabel) component).setText("");
}else{
double number = 0.0;
number = new Double(value.toString()).doubleValue();
DecimalFormat df = new DecimalFormat(",##0.00");
( (JLabel) component).setText(df.format(number));
return component;
} -
My airport problem has returned big time --Need some Help!!
Aloha once again:
I though that this was fixed by simply changing channels on my airport router, but that fix only lasted for a few days, but now it's back and even worse. Let me give you some background on this problem. Here's my original message concerning the problem:
I have my Airport Router connected to the Internet via DSLcable. I then tie my two computers into the internet via their airport cards. For about 6 months this system has been working just fine. Recently my desktop computer quit listening to the router and can no longer connect to the internet. It shows no signal strength and the name of the network on the Airport is not seen in the "connect to internet" panel. The same Airport works just fine on my LapTop and I am using it right now to get this message off to the internet.
I have fixed permissions, removed the airport card and cleaned the connector, the antenna plug and removed the system configuration folder from library preferences all to no avail!
This problem has been hounding me, intermittently, for over a year now What can I do to remedy this??? HELP!!!!
Dan Page
Maui, Hawaii
The suggestion to change channels, that came from this original request, worked but just for a very short time. Now I have to shut down my computer overnight to get connected and then it only lasts for several hours and the connection quits.
I thought maybe heat was a problem, but the last time it happened I opened the computer and played a large fan right on the card. This did not help. I shut it down for the night and it was fine the next morning for about 2 hours.
One new data point; if I turn off just the airport on my laptop computer overnight, that will fix the problem for a short time also.
Still need some help!!!
DanFirst, power off both the Time Capsule and AirPort Express.
Wait a few minutes, then power up the Time Capsule first, and let it run for a few minutes.
Temporarily, move the AirPort Express to the same room or close proximity to the AirPort Express and power it up.
If the Express powers up correctly, power it off again and move it approximately half the distance between the Time Capsule and the general area that needs more wireless coverage. Try to minimize obstructions like walls, ceiling, heavy furniture, etc as much as possible.
Please report on your results. -
Need some help with a Macally enclosure and a spare internal drive
Need some help with a Macally enclousure
Posted: Oct 1, 2010 10:55 AM
Reply Email
Aloha:
I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
Any suggestions?
Dan PageHi-
Drivers aren't typically needed for external enclosures.
Macally has none listed for that enclosure.
The same is true for the WD drive, internal or external; no drivers.
With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
How is the external connected?
Have you tried different cables, different ports?
Bad/damaged cables are fairly common.
Have you verified connections inside of the enclosure? -
Need some help with downloading PDF's from the net.
need some help with downloading PDF's from the net. Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen? any suggestions?
Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
Need some help with the Select query.
Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
DeveloperHello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer. -
We have a set of oracle clients running on T5220 zones that need some help
Greetings all -
We have a set of oracle clients running on T5220 zones that need some help.
If, for example, I execute the query "select (all) from dba_objects", trace output reports 90% of the elapsed time spent under "SQLNet message from client".
Here are OS details for the clients: Solaris 10 5/08 s10s_u5wos_10 SPARC
Running "uname -a" from the client gives:
(SunOS bmc-ste-app 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220)
Here are OS details for the dataserver: Enterprise Linux Enterprise Linux Server release 5.2
Running "uname -a" from the dataserver gives:
(2.6.18-92.1.6.0.2.el5 #1 SMP Thu Jun 26 17:44:55 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux)
The RDBMS is 10.2.0.4
Again, please note, there is no application in the picture here. We are just running a simple catalog query (select * from dba_objects) from sqlplus. Why the wait on something like this? The wait also occurs when a different query is used (select (all) from SYS.COL$ where rownum < 50000). And it doesn't matter if I used the full client or the instant client. I still get the same high-wait.
We had thought - maybe this is a network thing - so we put a test client on the same subnet as the dataserver. This helped - but not enough. The wait is still way too high even with firewalls taken out of the equation.
We've also looked at arraysize, SDU, kernel settings. And we've spent time going over tkprof, truss and sqlnet-tracing.
Has anyone ever had to solve this HIGH WAIT ON CLIENT issue? Is there a work around or some tweak I'm missing.
Is anyone configured like we are (linux dataserver, solaris clients)? If so - did you see anything like this?
tia -
Jim
Edited by: jim1768 on Mar 31, 2010 1:47 PM
Edited by: jim1768 on Mar 31, 2010 2:12 PM
Edited by: jim1768 on Mar 31, 2010 2:13 PMHello,
We have the exact same issue. Did you ever solve this issue? We have a t5220 and have just upgraded our 11.5.10.2 11i system on it from 9.2.0.8 32-bit sparc to 11.2.0.1 64-bit sparc. Things should be faster but arent, and our consultant has tracked it down to high wait times when the apps tier using forms connects to the database tier on the same box. So even though the t5220 is both server and client, there is something about the client sql connection.through TNS that his having trouble. Thanks for any information. We've also created an S/R with Oracle.
Note: I am well aware of the other issues with the CMT server series but this particular issue seems independent of the regular / known issues and remains a mystery to us. Other known issues with the CMT servers for SPARC:
Metalink Note 781763.1 (Migration from fast single threaded CPU machine to CMT UltraSPARC T1 & T2)
http://blogs.sun.com/glennf/resource/Optimizing_Oracle_CMT_v1.pdf
http://blogs.sun.com/glennf/tags/throughput
http://blogs.sun.com/glennf/entry/getting_past_go_with_sparc
http://www.oracle.com/apps_benchmark/doc/E-Bus-11i-PAY_ORA_SUN-T5220.pdf (this paper has some oracle init settings at the end. The kernel settings have been included in the OS upgrade)
http://blogs.sun.com/mandalika/entry/siebel_on_sun_cmt_hardware -
Need some help in LiveCycle Designer ES 8.2
Hi i need help with tables in livecyckle.
Example. I create one table with 32 rows and 8 numretic cells, and another table below with 1 row and 8 numretic cells.
In the big table i can input numbers and working fine.
now to my problem. Ex, i want to input number 12 in row 1 cell 3.and then again same number 12 in row 2 cell 3 and i want the result (24) in table 2 row 1 cell 3. is there anyboby who can help me with that See below
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
12
3
5
12
7
9
4
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
4
24
10
14
Best regards StigHi again Steve and thanx for the reply..send you a coupie of my file.
All text on it is in swedish so i can explain a little for you.
Text Veckodag is Weekday,Tim is hours. Frånv. is a shortname for sickness,
Dagtid is daytime Kväll is evening, Helg is weekends, Afton is Big weekend
like christmas day, s-helg is a shortname for big weekendsdays like day
after christmas day, Jour is jour. The field to the left with numbers is
date. Totalt is total
The only fields i need some help with is the field from Tim to Jour. And the
result should apear in the last fielt Totalt
Can also tell that im not so good in english but im learning. And the last
thing of all :Happy easter to you and thanxs again.
Stig in sweden My E-mail adress is [email protected] -
Need some help after inserting CMS system
Hi on my site ive inserted an CMS system from Cushy. It all work that isnt the problem. The problem is that my page is a mess now.. The only thing ive addes is a cms code so im hoping the solution isnt hard to do.
There are three pages that are complete changed.
The home page
http://www.vakantiewoningeninsuriname.nl/index.html
The text colomn right under is moved.How can i place this back?
on http://www.dorff.nl/ you can see how it was before i add the CMS.
The next page is:
http://www.vakantiewoningeninsuriname.nl/bezienswaardighedenparamaribo.html
You can see there is a lot extra space between the head and the text. And you see that the text is not only at the right side anymmore.
This is how it should be:
http://www.dorff.nl/bezienswaardighedenparamaribo.html
The same goes for this page:
http://www.vakantiewoningeninsuriname.nl/prijzen.html
And this is how it have to be:
http://www.dorff.nl/prijzen.html
Hope you can help, thank you for looking..
Regards BrianDear Nancy,
Thank you for your response,
I will try to explain again what is wrong. On my site you see this page:
http://www.vakantiewoningeninsuriname.nl/prijzen.html
Problem is that the picture below is on the right side of the page instead of the left like the other pictures.
On:
http://www.dorff.nl/prijzen.html
You can see how it should looks.. Pictures to the left and text on the right. Dont know what happened when im adding the Cuschy CMS. Hope you can see what is wrong.
Regards Brian
Date: Wed, 2 May 2012 13:04:14 -0600
From: [email protected]
To: [email protected]
Subject: Need some help after inserting CMS system
Re: Need some help after inserting CMS system
created by Nancy O. in Dreamweaver - View the full discussion
Change this:
Prijzen
Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
to this: <!Begin CushyCMS>
h2. Prijzen
Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
<!end CushyCMS> Nancy O.Alt-Web Design & PublishingWeb | Graphics | Print | Media Specialists http://alt-web.com/http://twitter.com/altweb http://alt-web.blogspot.com/
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4374962#4374962
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4374962#4374962. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Maybe you are looking for
-
GUI_DOWNLOAD problems with CR+LF when transfering from unicode system
Hi, I was successfuly used FM GUI_DOWNLOAD in a non-unicode systems for years. Lately I faced a challenge to rewrite my code for a unicode system. The configuration is: - SAP R/3 unicode system; - data to be downloaded at presentation server in a non
-
Is this the infamous iMac interface freeze?
I have a brand new Aluminum iMac that's less than a month old. After reading about other new iMac owners experiencing Mac OS freezing on them because of a possible graphics driver issue, I decided not to do the iMac 1.1 update while I was on Tiger. M
-
Problem with Airdisk: files not copying
This is a strange one: I copy large movie files (several hundred of MB) over to my Airdisk, the progress bar goes through the whole process - but the files do not show up afterwards. No error msg, they just aren't there. This happens in about 50 perc
-
hi sample table can be considered as scott.emp table CREATE TABLE "EMP" ( "EMPNO" NUMBER(4,0), "ENAME" VARCHAR2(10 BYTE), "JOB" VARCHAR2(9 BYTE), "MGR" NUMBER(4,0), "HIREDATE" DATE, "SAL" NUMBER(7,2), "DEPTNO" N
-
Add an Embedded Component to a Existing Screen?
Is it possible to Add an Embedded Component to a Existing Screen?