Alert monitor for Forecast Exceptions?

Does Flexible Planning offer any type of Alert monitor for flagging Forecast Exceptions? We're creating a statistical forecast in MC94 and would like to set up some automatic triggers or alerts. I know APO has this functionality, but I have yet to be able to find any type of exception reporting.
Any help would be greatly appreciated.
Thanks.

Hi,
Do you still have the issue, Please let us know if you need further help.
BR
Claire

Similar Messages

Alert Monitoring for tcodes!

Hi Experts,
I need to monitor ST22(Short Dumps),SM13(update requets through CCMS.Please let me know how can we set up alert monitoring for particular tcodes?

Hi,
For this first you need to install CCMS agents first, if you have solution manager is landscape(It should actually) you can monitor same from solman.
[Here is the link |http://help.sap.com/saphelp_nw70/helpdata/en/e2/eff640fa4b8631e10000000a1550b0/content.htm]
Then you can send mail trigger from solution manager for update errors and dumps as well.
Regards,
Gagan Deep Kaushal

PI 7.11 - Alert creation for RFC Exceptions does not work

Hi folks!
In our PI 7.11 SP04 system we have created an Alert Category as well as an Alert Rule to be informed about errorneous messages in the Integration Engine (ABAP).
The scenario is synchronous SOAP Axis to sRFC, where the RFC answers with an exception that is transferred to a SOAP Fault response message.
Now we see messages with Application Errors in the Integration Engine, but no alert is created. Having a look at the alert creation log using report SXMSALERT_LOGREADER shows us that the system even does not try to create an alert for these messages. Alerts are only created for errors in the Adapter Engine.
Question:
Why does the system not create alerts in this case and how can we achieve this?
Thanx for any hint!
Kind Regards,
Volker

Hi!
Additional information for all:
When forcing an error like "receiver not found" both kinds of alerts are created: AE Alert and IE Alert. Thus in general the alert configuration and the alert rule for IE errors are correct and working - only not for RFC exceptions ....
Regards,
Volker

Alert monitor for messages in error status

Hi, it is possible to configure de Xi Alert Monitor to show in the message body the error that shows the message monitoring?
In the SOAP header when there is an error y can see a tag "error" and it shows this info (for example):
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">STARTUP_EXCEPTION</SAP:Code>
<SAP:P1>com.sap.aii.utilxi.prop.api.PropertiesException</SAP:P1>
<SAP:P2>Unable to read configuration data (ExchangeProfil~</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error occurred while starting the Java application "IntegrationServices"; restart the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
It is a way to show any of this information in the message body that sends the Alert monitor?
Regards.
Mariano.

Hi,
you will not be able to get the entire msg payload of SXMB_MONI in alert.
But you can create a alert category and in its Long text you can have variables for Error Category and Error Text. So you will get alert mails with Error category and Error Text.
Regards,
Rajeev Gupta

CCMS Operating System Alert Monitor for Filesystem

Hi,
In alert monitor set for operating system, for some filesystems the freespace & percentage_used were showing zero and saying value is obsolete.
But those filesystem were existing with some space used in it.
How to make that particular filesystem alert to reflect the space which is used.
Please advise.
Thanks in Advance.
Thanks
Arun.

Hi Sunny,
Thanks for your quick response.
For OS file alerts oscol.ini is responsible. But i am getting the same prob with most of the alert monitor.
Those are collected the data some weeks ago. Not reflecting the current status.
Eg: CPU_Utilization Alert also showing last week date and showing the current utilization.
Is there any other program need to be run to get those alert monitor set to get update.
Please advise.
Thanks
Arun

Alert monitor for long running background jobs

Hello,
I have to configure an alert moniter for long running background jobs which are running more than 20000 secs using rule based. I have created a rule based MTE and assigend MTE class CCMS_GET_MTE_BY_CLASS to virtual node but i dont find a node to specify the time.
could any one guide me how can i do this.
Thanks,
Kasi

Hi *,
I think the missing bit is where to set the maximum runtime. The runtime is set in the collection method and not the MTE class.
process: rz20 --> SAP CCMS Technical Expert Monitors --> All Contexts on local application server --> background --> long-running jobs. Click on 'Jobs over Runtime Limits' then properties, click the methods tab then double click 'CCMS_LONGRUNNING_JOB_COLLECT', in the parameters tab you can then set the maximum runtime.
If you need to monitor specific jobs, follow the process (http://help.sap.com/saphelp_nw70/helpdata/en/1d/ab3207b610e3408fff44d6b1de15e6/content.htm) to create the rule based monitor, then follow this process to set the runtime.
Hope this helps.
Regards,
Riyaan.
Edited by: Riyaan Mahri on Oct 22, 2009 5:07 PM
Edited by: Riyaan Mahri on Oct 22, 2009 5:08 PM

CCMS - Alert monitor configuration

Hi
We are configuring the CCMS Alert monitor for monitoring the R/3 systems. We are referring sap help and sap notes, but also we are looking for document which instructs the complete configuration, will be appreciated if share the same.
regards,
rajesh

Hi rajesh,
Have you checked the iTutor files in
http://service.sap.com/rkt --> SAP Solution Manager 4.0 --> Technology Consultants and System Administr
These are really good documents with step by step instuctions and screen
Thanks
Prince Jose

CCMS agents, alert monitoring, SNMP traps

Hi Guys,
I have a question. There is a requirement about monitoring. Any documenation or links will be really appreciated.
My client needs me to use CCMS agents, alert monitoring for both ABAP and JAVA stacks, SNMP traps, sending SNMP traps, interface CCMS with third party monitoring tools. Mostly, the ,monitoring is done thru RZ20.
Anybody can point me in right direction or material.
Thanks
Venky

Hi,
Check these CCMS Weblogs. Really good ones...
/people/federico.babelis2/blog/2006/04/26/ccms-rule-based-monitors-configuration-guide-for-dummies
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Feel free to revert back.
--Ragu

Alert Monitor with exceptions in WAD

Hi All,
I'm trying to use alert monitor in web application designer to show two queries with red, green and yellow statuses. In my web template, I have inserted two queries in two tables (both queries have exceptions) and alert monitor as web item. In properties(context menu), I choose infocube on which these queries are build,marked the red, yellow, green status ,mentioned them in list of columns entry and checked the display toolbar entry.
When I execute , It shows the display of alert monitor drop down box with functions (from Info provider, info area, queries..etc) and alert boxes for red, yellow and green. If I check on red box and uncheck other boxes, still I'm seeing all records with other status as well. There is no change in the query result if I switch from red , green or yellow. And also I am not seeing how many rows of red , green or yellow alerts which i should as i have selected in the list of columns entry.
I've set the exceptions in Reporting Agent for these two queries also.
Any Idea why I'm not getting the functionality of alert monitor. Do I need to set up something for alert monitor to work in reporting agent or in alert management in order to use .Am i missing something in configuration
Any ideas and solutions..
Thanks in advance,

LauQ,
Did you figure out the solution?? Is it something to do with the settings of exceptions in reporting agent. I strongly feel so, as the configuration for alert monitor is straight forward in WAD. There is a How to Guide document on..How to Intergrate BW reporting agent with Alert Framework. Did you have a look at it. I'm glancing it right now.. You can find in sdn.. May be that helps.. Please let me know if you get something... I'm still working on this issue..
Thanks ,
Veeru

How can I edit the Alert Description for a SQL Agent Job monitor, specifically Job Duration.

I'm setting up some sql agent job monitoring, I need to monitor for Job Duration.
This is easy enough, I just create the overrides and set the parameters and it alerts as expected, however there is no alert text. The alert does me no good with out an alert description. How can I change this?
Paul Arbogast

Paul
It is not an easy way for your just copy that monitor and modify it. If you has interest, you may use MP2XMLDumper tool to export SQL server monitoring MP , modify relate moniotr and import it into SCOM.
You can download MP2XMLDumper tool from
http://blogs.technet.com/b/cliveeastwood/archive/2007/08/22/mp2xmldumper-version-2-0-export-opsmgr-mp-s-to-xml-using-mp-name-export-criteria.aspx
Roger

Monitoring and Alerting tools for Business Object Data Integrator

Hi,
We have Business Objects DI installed in AIX 5.3 environment. Please advise any type of monitoring and alerting tools for DI.
Monitor tools to monitor Job servers(like job service and web services running properly) and also to monitor long running extraction jobs and alerting the same. Thanks.
Thanks.
Raj.

Hi Thomas
Though both the tools objectives are for Data integration, the purpose for both tools are different.
SAP BODS/ BOBJ Data Integrator is an ETL tool which involves combining data residing in different sources and providing users with a unified view of the data
SAP PI is a Middleware/EAI tool which have a mechanism/technology that connects different parts of an application or a series of applications
SAP BOBJ Data Integrator
Bulk Data Integration
Extraction Transformation and Loading
Deals of huge volume of data
SAP PI
It is process based integration of application data
It is a middle ware which integrates various project applications into a common programming package that can be operate/access as a single application
SAP NetWeaver PI is SAP’s implementation of Service-oriented Architecture (SOA) middleware and facilitates the integration of business processes that span different departments, organizations, or companies.
SAP PI uses SAP NetWeaver Application Server and message servers where in fail over cases the messages can be resent again.
The below differences will gives you more clarity
Verdict is we can use both the tools for data transfer/migration and for choosing the tool depends upon the business requirement
Please reply back if you need more information.
Regards
Murthy

Giving alert descriptions for logfile monitoring

Hi,
Can somebody please helo me to know this better.
we would be using xml for creating management packs, while creating a MP for logfile monitoirng how would you give the alert description for multiple errors in single logfile.txt
Eg:
Logifle path => E:/temp/test.txt
i want to monitor 3 strings in the above path (error / duplicate / restart), how would i give the alert description in a sngle monitor
Alert description == $Data/Context/Params/Param[1]$

Thanks for the answer Suresh,
but the above alert description
$Data/Context/Params/Param[1]$ is working only for simple logfile detection
<LogFileDirectory>E:\logfiles\Logs\</LogFileDirectory>
<LogFilePattern>IPCDataService.log</LogFilePattern>
<LogIsUTF8>false</LogIsUTF8>
<Expression>
but it is not working for
<RepeatedLogFileDirectory>E:\logfiles\Logs\</RepeatedLogFileDirectory>
<RepeatedLogFilePattern>IPCDataService.log</RepeatedLogFilePattern>
<RepeatedLogIsUTF8>false</RepeatedLogIsUTF8>
<RepeatedExpression>

SNMP, Alerts for OutOfMemory Exceptions

We are using WLS6.1 on Tru64. Using SNMP, can we generate alerts for OutOfMemory
Exceptions that occur on any Managed servers in a cluster?

We are using WLS6.1 on Tru64. Using SNMP, can we generate alerts for OutOfMemory
Exceptions that occur on any Managed servers in a cluster?The SNMP MIB defines the following entries in the jvmRuntimeTable:
jvmRuntimeHeapFreeCurrent INTEGER,
jvmRuntimeHeapSizeCurrent INTEGER,
you can set CounterMonitor on these attributes through the Console and set thresholds
to send you alerts when the heap reaches a certain limit.
hope this helps,
Mihir

Raising event when value for a parameter in alert monitor changes

Hi All,
We are using Redwood Cronacle version 7 and have connected it to SAP solution Manager System to get the central monitoring data. Now we want to raise a particular event whenever value for a specific parameter in alert monitor gets changed.
I had a look of already present functions in JCS_MON package, but was not able to find any pre-existing function.
Any pointers on how to achieve this...
Thanks a lot.
Best regards,
Vithalprasad

Hi Anton,
Thanks for your reply. We want the event to be raised on one of the parameters which is coming from SAP solution Manager. This event is required to be raised every time the value of that parameter gets changed from its current value. So it is not possible to define some severity where value can be defined.
One way can be to store the previous value in one custom table in repository and keep on checking with the present value. Once the difference is found then raise the even & replace the current value with the new value. But just want to know if there is some better solution for this.
Thanks a lot.
Best regards,
Vithalprasad

In Alert Monitor - Is it possible to add Price or Cost as Column Value?

Hey Folks
I am trying to define a methodology to manage and work on the exceptions in the Alert Monitor,
and I would like to carry on the ABC analysis based on Price or Cost?
The alert monitor was defined prior to my time on this latest project.
Would it be simple to add or difficult to link the price from values from whatever table they come from,
to show as column fields? so they ABC analysis can use that column as the Ratio one?
If anyone think this is feasible let me know.
thanks for your feedback
JD Loera

Hello!
Awesome, thanks for the response, I will put that in my project list and will link with the Basis/ABAP team.
Cheers!
Business Procees note to all out there in *APO DP Business Processes and Planning.*
If you use the alert monitor, as you know you can define there macro generated alerts and analyise through the variances from Target and Actual Values.
Also, you can still use the ABC analysis there, to identify A B C of the results that you get ( in the example above, % of variance )
However, from a Business Process bang for your buck and time. By adding the Material Cost or Price, the Demand Planner or SNP Planner can also do the ABC analysis based on the price as well, and really then identify the items with higher value to work with,as those are important to always keep in check. (ABC from the fiancial point of view so to speak)
Cheers all, worth to think about for your own Alert Monitor processes.
JD Loera

Alert monitor for Forecast Exceptions?

Similar Messages

Maybe you are looking for