Alert Monitor: Selection On Product Number

Hi experts,
I want to maintain an alert profile and try to enter several single product numbers in the selection dimensions.
But I can only enter 18 values in the column "value from" - that's it.
Does anybody knows how can I enter more single product numbers?
Thanks
novize

Similar Messages

Alert monitor in production

Hi Gurus I have the following questions regarding the alert profiles in production landscape and. Is there a way to transport the alert profiles from the AUD system.
Is it a good practice to make the alert monitors in the production system. i have made some excess do u think that I can delete them, because i think that doing this should not create any problems.
Thanks

Hi,
       If you need to transport the aalert profile then go to the table /SAPAPO/AM_PSET. Pass the alert profile name in the SET_ID field. Then select the contents of the row in the table /SAPAPO/AM_PSET then click on Table Entry in the menu and select transport entries. (Menu Path : Table Entry -> Trasnport Entry)
Use the program /SAPAPO/AMON_REORG to delete the unwanted alerts.
Regards,
Siva.
Message was edited by:
        sivaprakash pandian
Message was edited by:
        sivaprakash pandian

How set up alert Monitor with available to promise profile?!

Gurus,
I read a lot of notes about alert profile but I ´ve been in doubt.
I set the monitor alert in /sapapo/amon1:
- Selected alert type
- Selected some products and my allocation
- Assigned alert profile - defined the bucket
Check instruction:
- Activated "ATP Alert Act."
I vent seen any place to assign my alert profile in /sapapo/bop. Is it possible or necessary?
When I redetermine the alerts for my profile in /sapapo/amon1 any alerts are showed.
I don´t want to use macros to create alert.
I created a scenary to see an alert:
My scenary
Availability: 100
Order confirmed: 100
I changed my orders to 50.
Availability: 50
Order confirmed: 100
Execute alert monitor
Result: No warning
I´m glad for your attention...
Best Regards!

Thiago,
http://help.sap.com/bp_scmv250/BBLibrary/HTML/S21_EN_DE.htm
Best Regards,
DB49

CCMS Alert Monitor (edit monitor-configuration.xml. ?)

Hi Friends
I'm trying to change the default polling time for the CCMS Alert Monitor, 5 minutes instead of 30 minutes.
In http://help.sap.com/saphelp_nwpi71/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm you can read:
Accuracy
The default polling period for the monitor is 30 minutes. If you want to have shorter polling periods, you can change them in the SAP NetWeaver Administrator as follows:
1. Choose Availability and Performance Management ® Resource Monitoring ® Java System Reports (alias: /nwa/java-sys-reports).
2. Select an arbitrary Number of errors entry in the monitoring tree of the Adapter Engine (leaf node).
3. Choose Configuration in the right-hand pane.
4. Choose Edit in the dialog box that appears.
5. Change the polling period to 5 minutes, for instance.
6. Choose Save and wait until saving is finished (be patient, since this may take a while).
7. Choose Configuration Management ® Infrastructure Management ® Java Configuration Browser.
8. Choose apps ® sap.com ® com.sap.aii.af.app ® Monitoring Configurator ® monitor-configuration.xml.
9. In the xml file, change the polled-by-template period to the same value as above, for example, 5 minutes.
10. Save the modified xml file.
11. Choose Operations Management ® Infrastructure Management ® Start & Stop ® Java EE Services to restart the Monitoring service to apply the changes.
But in step 9, the xml file I've found in my PI 7.1 (SP6) is this:
<monitor-configuration>
<monitor-semantics />
<monitor-tree />
</monitor-configuration>
Also, there is no way to modify that file, you can only display it or download it.
can anyone tell me how to edit the file.
regards
raja

Hi Raja,
This is the same as doing the following:
You can locate the monitor-configuration.xml file in the SDA com.sap.aii.af.app.sda (inside META-INF folder). You can find this SDA in the install directory of PI installation. In this XML file please locate and edit the following tag:
<template-info template-name="SAP_XIJ2EE_RCRDS">
                        <polled-by-template period="30" unit="MINUTE">
                            <generating-resource
                                name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
                            <template-attribute-mapping>
                                <invoked-resource-method name="getMonitoringRecords"/>
                            </template-attribute-mapping>
                        </polled-by-template>
                    </template-info>
Change the above to the following *************
<template-info template-name="SAP_XIJ2EE_RCRDS">
                        <polled-by-template period="5" unit="MINUTE">
                            <generating-resource
                                name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
                            <template-attribute-mapping>
                                <invoked-resource-method name="getMonitoringRecords"/>
                            </template-attribute-mapping>
                        </polled-by-template>
                    </template-info>
The main change is the polled-by-template value from 30 mins to 5 mins as per your req ******
Construct back the SDA (you can search SDN for that) with this edited XML and then redeploy this SDA with the help of JSPM tool.
This will re-start the PI Server for the changes to come into effect.
I hope this helps.
PS: You can consult your BASIS consultant to locate this sda and re-deploy it on PI Server.
Regards, Gaurav.

GRC 10 ALERT MONITOR: FALSE/POSITIVES BIAS CALL TRANSACTION

Hi, everybody. I had an Issue related with GRC AC 10 alert monitor that is reporting that some users triggered SoD risks TR54 , TR01 and TR03 originated by transactions: ML81N - service entry against purchase order and FB05 - post with clearing. Both transactions are not available for those users because they don´t have the authorization profiles in the UMR or available in dialog mode.
Nevertheless we observed that both actions (ML81N and FB05) were invoked by a "CALL TRANSACTION" instruction from another program report.
I believe that this is a false positive alarm that were triggered even though the users have not assigned roles or functions of risk.
I will appreciate your comments.
Best Regards.
Victor Sarabia
IT GRC Manager

1) How do I not alert on first failure but initiate an immediate retry in 30 seconds and if retry fails then alert. This prevents false positives and is a feature that products such as uptrends performs as default
SCOM has no that kind of feature
2) How do I alert on with just one alert of transaction failure instead of each of the components of the transaction monitor failure. Example our first failure threw 10 alerts encompassing each part of the transaction
a) Right click web application transaction Monitoring object --> View Management Pack Object --> View Monitors
b) Expanse the web application transaction monitor --> entity Health --> Availability --> Web Application XXXX
c) Open the monitor properties of Request X -XXX and uncheck "Generate alerts for this monitor"
3) How do I create an uptime report to show monthly and quarterly uptime for the website based on the transaction monitoring.
a) go to Monitoring workspace --> Web Application Transaction Monitoring --> Web Application State
b) select the web application transaction entity and click Availability Report task on task pane
c) Select the report period and run
Roger
Roger

Alert Monitor config

Experts,
I was been trying to working on setting up the Alert Monitor in APO. But I am not sure how to configure and make it work. Till now I have done the following:
Created the Alert profile with AMON1 in the application specific alert profile.
Selected the alert type-Availability Check Shortage.
Defined the location/product
Linked the alert profile to overall alert profile.
Saved
Created an order wherein the availability was short.
It goes to APO for rule based atp wherein the order is not completely confirmed.
Checked the alert profile in that screen but I see no alerts.
Do let me know if I am doing it the right way. If not then please let me know the way to configure the alert monitor.
Thanks in advance
Karan

Hi Karan, I think you need to run alert determination in /sapapo/amon1 for the overall profile.

Multiple 0's displaying in Alert Monitor Screen SNC 5.1

When I display the alert monitor in SNC 5.1 and select one of the alert types, they quantity fields are displaying multiple zero's after the number. Has anyone seen this?

Thanks to both of you for the speedy response. I have already seen that article, as well as 790397.1 - PROCESS J000 And M000 Die [ID 790397.1]. I'm just a little confused as to why Oracle is saying it's an out of memory condition when there's nothing in the log or trace files (other than the condition matches a couple of articles they have) that support the conclusion. Don't get me wrong, I'm certainly not an Oracle on Windows expert, most of my stuff revolves around Linux/UNIX and I avoid anything windows like the plague, other than starting a putty session.
My understanding is that each process in a windows 32bit environment gets a 4GB Virtual Address Space, which is split into a lower 2GB application space and an upper 2GB kernel space. If the trace file is showing that only 1.6GB of physical memory has been consumed, wouldn't this indicate that there isn't a single process on the server that is even close to reaching it's 2GB limitation?

Questions on Alert monitor

Hi,
I have few questions on alert monitor.
1. If we create an alert and have it as default macro, does it display in interactive planning book without a alert profile assignment? or should we assign an alert profile to see alerts in planning book. I remember that we just need alert profile if we need to check the alerts in a separate screen for our convenience.
2. Is alert profile assignment specific to a user? If that's so, then how we assign different profiles to different users? any transaction? or are they specific to a selection or planning book or version?
3. In Application specific alert profile, in SDP tab, under "SDP - Database Macro Alerts", I see few alerts types apart from standard ones. These were actually our previous alert macros. How did they get created like a alert type?
4. I created a simple macro with change color of cell to red if a condition is satisfied. Also raise an alert for that and assigned it to default. When I go back to the SDP94 screen and run the macro, my cells are highlighted as red whenever the condition is satisfied but when I click on the alerts icons, I get a blue information message "No alerts exist for your selection". When I click on the icon, it gives me a window saying " Internal error analyzing SDP alert".
Can somebody help me understand what's going wrong?
Thanks.

I think you can select that standard type.
However since it was SAP delivered, we chose not to, and instead created more line items in SPRO with text such as "Alert Message 1" etc. We created numbers ranging from 9001 to 9010. While defining the custom alert, under alert type, it showed up these numbers that were setup in SPRO. I would assume that just like you pick up 9001, you should be able to pick up 4100 or 4101 (alert type numbers) which is the standard status alert. If you run out of the numbers, you would definitely need to add more in SPRO settings. Remember the alert text is picked from SPRO, where you can change and make it more meaningful so that users can do sorting on those alerts.

Short dump while running Alert Monitor

Hi,
I am getting a short dump while determining alert in Alert Monitor through T. Code /SAPAPO/AMON1. The error says as below:
Runtime Errors BCD_NO_SIGN
Short text : A packed number contains no sign.
What happened? : Error in the ABAP Application Program, The current ABAP program "SAPLKKBL" had to be terminated because it has come across a statement that unfortunately cannot be executed.
Information on where terminated : Termination occurred in the ABAP program "SAPLKKBL" - in "FB_OUTTAB_SORT2".

Hi Axon Generic,
Please checkon the following
1) In the overall profile of alert monitor, check the relative
time interval whether specified correctly
2) Under the alert profile in Overall profile, check the
threshold values are defined correctly
3) Check the SAP Note 151709 , 189061
Please confirm your findings.
Regards
R. Senthil Mareeswaran.

I have just upgraded to 10.6.7, and was browing the App. Store, I selected a product and it started to download, I cancelled the download, but it still registers in my purchases list, have I purchased that appl. and how can I cancel the purchase?

I have just upgraded to 10.6.7, and was browing the App. Store, I selected a product by mistake and it started to download, I cancelled the download, but it still registers in my purchases list, have I purchased that appl.? and how can I cancel the purchase in my purchases list?

I think that as soon as you click "Buy" and type in your details, the iTunes server is alerted that you have bought the item, even if it hasn't downloaded. Your "purchased" list is based on your account and not your computer so I'm afraid even if you haven't completed the download, you will be charged for it (but if you do now download it, you won't be charged again). This also means that you can't remove items from the purchased list.
Glad to be of help (I hope),
Jonathan

Alert Monitor with exceptions in WAD

Hi All,
I'm trying to use alert monitor in web application designer to show two queries with red, green and yellow statuses. In my web template, I have inserted two queries in two tables (both queries have exceptions) and alert monitor as web item. In properties(context menu), I choose infocube on which these queries are build,marked the red, yellow, green status ,mentioned them in list of columns entry and checked the display toolbar entry.
When I execute , It shows the display of alert monitor drop down box with functions (from Info provider, info area, queries..etc) and alert boxes for red, yellow and green. If I check on red box and uncheck other boxes, still I'm seeing all records with other status as well. There is no change in the query result if I switch from red , green or yellow. And also I am not seeing how many rows of red , green or yellow alerts which i should as i have selected in the list of columns entry.
I've set the exceptions in Reporting Agent for these two queries also.
Any Idea why I'm not getting the functionality of alert monitor. Do I need to set up something for alert monitor to work in reporting agent or in alert management in order to use .Am i missing something in configuration
Any ideas and solutions..
Thanks in advance,

LauQ,
Did you figure out the solution?? Is it something to do with the settings of exceptions in reporting agent. I strongly feel so, as the configuration for alert monitor is straight forward in WAD. There is a How to Guide document on..How to Intergrate BW reporting agent with Alert Framework. Did you have a look at it. I'm glancing it right now.. You can find in sdn.. May be that helps.. Please let me know if you get something... I'm still working on this issue..
Thanks ,
Veeru

ALERT MONITOR

Hello
I have configured the Alert Monitor, Alert is triggered, the message comes on the external mail.
But I have 2 questions related to the Alert Monitor.
1) Explain what the appointment of the following fields in the t-code ALRTCATDEF:
alrtcatdef -> Properties -> Max. No. of Dels
alrtcatdef -> Properties -> Expiry Time in Min.
If I understand correctly, these two parameters make it possible to limit the number sent to external e-mail messages to one Alert category for a specified period of time?
If so, I have this option does not work, it is ignored.
That is, point out in t-code ALRTCATDEF: 3 posts in 5 minutes. 10 generating error messages. I get 10 messages per mailbox.
(Error is generated by running a report, calling class PROXY, which obviously causes an error).
How to limit the number of outgoing messages to external mail Alert for one category for a specified period of time?
2) When an error occurs in the JDBC adapter (eg: "ORA-01400: cannot insert NULL into (" PI "." MY_TABLE "." FIELD_1 ")") can not get data from the container (t-code ALRTCATDEF):
SXMS_TO_ADAPTER_ERRTXT (Data Type - CHAR70)
SXMS_TO_ADAPTER_ERRLINES (Data Type - ALPF_STRING_TAB)
However, other containers, normally return their contents.
In t-code: alrtcatdef -> Long and Short Text -> Long Text (E-Mail, Fax) wrote the following:
Error in Adapter Engine: &SXMS_TO_ADAPTER_ERRTXT&.
Full text errors in Adapter Engine: &SXMS_TO_ADAPTER_ERRLINES []&.
How can I put in an error message JDBC adapter?
Software Component Version:
SAP_ABA: Release - 710, Level - 0007, Highest Support Package - SAPKA71007, Short Description - Cross-Application Component.
SAP_BASIS: Release - 710, Level - 0007, Highest Support Package - SAPKB71007, Short Description - SAP Basis Component.
ST-PI: Release - 2005_1_710, Level - 0003, Highest Support Package - SAPKITLQJ3, Short Description - SAP Solution Tools Plug-In.
PI_BASIS: Release - 2006_1_710, Level - 0007, Highest Support Package - SAPKIPYN07, Short Description - PI_BASIS 2006_1_710.
SAP_BW: Release - 710, Level - 0007, Highest Support Package - SAPKW71007, Short Description - SAP NetWeaver BI 7.1.

abhishek salvi wrote:>
>
How to limit the number of outgoing messages to external mail Alert for one category for a specified period of time?
> RWB --> Alert Rule Definition --> Suppress Multiple Alerts of this Rule
I know and use, but it has many disadvantages.
>
How can I put in an error message JDBC adapter?
> could not get your question....
>the second alert container that you defined will contain more alert details (number of characters).
The fact that SXMS_TO_ADAPTER_ERRLINES reflects more complete information about the error, I know. But I did not receive any information from SXMS_TO_ADAPTER_ERRTXT, and SXMS_TO_ADAPTER_ERRLINES.
Containers returns NULL, while the RWB in Message Monitoring error is displayed.

Alert Monitor Issue

Hi APO Experts,
I have a Planning Book/Data View which has 4 macros generating standard status alerts for the same book/view under different situations. Now when i create an over profile and an sdp profile for this book/dv and do the redetermine alerts after ruuning those macros in bg. Am not able to see all the alerts listed in the alert monitor even though scenario calls for the alerts to generated.
PB/DV --XX
Macro 1-- for KF1
Macro 2 -- for KF2
Macro 3--for KF3
Macro 4--for KF4.
After running the macros in the bg, when i load the selection in the pb, even though i see that for all the kf values populated in the pb should have created the alerts. i am not able to see those in the alert monitor. Please help me , where i am missing the link in setting up the alerts for the same planning book/dv having multiple macros generating the alerts.
Kindly help me, as we r in the testing phase and am not able to find a fix for this.
Kind Regards,
Sanjeev

Hi,
First of all , Assign the SDP profile in the interactive planning book by the dropdown menu and check by running the macro in interactive planning book that whether the alerts are generated in interactive view.
If the alert are generated in interactive view , then the issue could be due to default macros not included in your backgtround running step. Include the default macros in the background job as the first step.
If the alerts are not generated in the interactive view itself, then check for below points:
a) If the KF values fits into condition defined in alert macro ?
b) Are the KF , alert condition and planning book / data view defined inside the alert step same as required. Sometimes if you copy the alert macro from other planning book / DV macro then inside the alert step , the pb/dv remains old.
c) Are the PB/DV defind in alert profile same as required ? Is there any threshold maintained for alert ? Is the selection profile correctly maintained inside alert profile ?
I hope it should resolve your issue.
Let me know if it helps.
Regards
Gaurav

When installing acrobat XI pro the 'select a product' drop down menu does not include my product?

when installing acrobat XI pro the 'select a product' drop down menu does not include my product?

For future reference... if you have the trial version installed and plan to buy it after trying it out, there is no need to uninstall it. It can be activted to full use with the serial number from your purchase.
You should still be able to download and install the trial version and use your serial number to activate it. For the direct download link to the trial below, be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html

Reporting communication channel errors in emails from alert monitoring

Does anybody know how to capture the error message reported on the communication channel and send it in the dynamic text of the email configured for alert monitoring?
I get the mapping error messages but all other message container element values seem to be blank.
None of the container elements (standard) defined seem to have the channel error message. in PI 7.0
Thx

Hi,
You can get all the alerts that were captured by the adapter monitoring i.e, communicaiton channel errors etc.
we can also trigger similar alerts for Adapter also when any adapter truns in to RED.
in RWB->Alert configuration-> choose adapter engine errors also then you will get alerts for adapter failure also.
If you need create alerts for each communication channel. in RWB->Alert montoring->Adapter type-> instead of giving * select indival commnication channel
for this you need to have alter configured for each Commnication channel in Alrtcatdef and RWB. so for each in RWB you select corerspoding communication channel.
You can monitor the sender and receiver service in CCMS, but I don't think you can monitor the commuication channels.
http://help.sap.com/saphelp_nw04/helpdata/en/45/e32b64f87c6f74e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/28/83493b6b82e908e10000000a11402f/frameset.htm
Thanks
Swarup

Alert Monitor: Selection On Product Number

Similar Messages

Maybe you are looking for