Alert occurred while loading metadata

Hello
I have the following message when lauching SUPM 2.0
Alert occurred while loading metadata - Error occured from portal component
any ideas ? is there any logs ?
Thanks
Chea-Lie

I not too long ago came across your write-up and have been reading along. I wish to express my admiration of your writing ability and capability to create readers read from the starting for the finish. I'd like to read newer posts and to share my thoughts with you.

Similar Messages

Bex Report Designer: Error while loading metadata

hi experts,
I am working with BI7 Bex Report Designer and we are using SP9. when i tried to load the Query in Report Designer its giving below error.
Error while loading metadata.
Check the Query and portal settings.(but the query is working fine in Analyzer).
and its giving message class RSBOLAP, message number 018 and Description is java system error: incoming call is not authorized.
when i double click the error its giving below error details.
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
could you plz suggest me how to rectify the problem.
regards
vadlamudi

Hi vadlamudi
The error message RSBOLAP 018 means, that the ABAP stack can't communicate with the Java Stack.
1) Please ensure, that the user, used for the Report Designer, is valid in the Portal too. Depending on the user management setup this means that there either needs to be the same user or an assigned user in the Portal.
2) In case the user is valid, it means a basic misconfiguration according to note 937697. In this case please run the Support Desk Tool and ensure, that all checks are green. Please ensure, that the latest version of the Support Desk Tool is used.
Regards,
Janine

D4O-1009 An error occurred while loading the worksheet

hye everbody
i create a worksheet in discoverer plus olap but i get the error *"D4O-1009 An error occurred while loading the worksheet"..*
even i uninstall the catalog and install the catalog..
when i create the worksheet and saved..of i exit..and try to open back...it show this error..
this is the diagnosis for the connection...
<D4OCheckConfig version="1.0.0.0">
<Check key="JDK version" value="1.6.0_16"/>
<Check key="BI Beans internal version" value="3.2.2.0.24"/>
<Check key="Discoverer Plus OLAP version" value="10.1.2.07.75"/>
<Check key="Discoverer version" value="10.1.2.48.18"/>
<Check key="port" value="-1"/>
<Check key="Connect to database" value="Successful"/>
<Check key="JDBC driver version" value="10.1.0.3.0"/>
<Check key="JDBC JAR file location" value="\TOSHIBA\disco\plus_files\d4o_double.jarjar"/>
<Check key="Database version" value="10.2.0.1.0"/>
<Check key="OLAP API Server version" value="10.2.0.1.0"/>
<Check key="OLAP AW Engine version" value="10.2.0.1.0"/>
<Check key="OLAP Catalog version" value="10.2.0.1.0"/>
<Check key="BI Beans Catalog version" value="3.2.2.0.24"/>
<Check key="Discoverer Catalog version" value="10.1.2.07.75"/>
<Check key="Authorized for Discoverer Plus OLAP catalog" value="Yes"/>
<Check key="OLAP API JAR file version" value="9.2"/>
<Check key="OLAP API JAR file location" value="\TOSHIBA\disco\plus_files\d4o_double.jarjar"/>
<Check key="Load OLAP API metadata" value="Successful"/>
<Check key="Number of metadata folders" value="3"/>
<Check key="Number of metadata measures" value="19"/>
<Check key="Number of metadata dimensions" value="17"/>
this is the error when i save the error in a notepad...
oracle.dss.d4o.common.D4ORuntimeException: D4O-1009 An error occurred while loading the worksheet.
oracle.dss.bicontext.BINamingException: BIB-14099 Unknown naming exception.
oracle.dss.bicontext.BINamingException: BIB-14067 Persistable object threw exception during lookup on method setXMLAsString; component class oracle.dss.dataSource.QueryServer; exception null.
i not have any clue...why this thing occur..
any idea why this thing occur...
thanks in advance....
regards,
rao..

Hi Rao
Please don't keep creating new postings for the same issue as it is hard to keep answering multiple posts about the same thing.
If you have done all of the things suggested by Keith in my previous reply, which as I say is what I would have done, then you really ought to raise this as a service request to Oracle.
I'm advising this because the particular error you are encountering does not come up in my database of fixes neither could I find any reference to it in either the OTN or MetaLink forums. This needs to be brought to Oracle's attention.
Best wishes
Michael

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

I have no problem connecting my i-phone programs to my tv through apple tv. but one program from an application from appstore don't go through apple tv. It says an error occured while loading the content.This is just for one program. All other works good.

My apple TV works fine with my I-Phone 4s. But one program from one of the application I downloaded from the app store dont work. When I load that a message comes "an error occured while loading this program" This is only for one program all other most of the time works good. Any one knows why ?

Hi there Mundaplackel!
I have an article here for you that can help you troubleshoot the functionality of that app that you have purchased from the app store, and should be able to give you some steps that will help you resolve the issue:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks for using the Apple Support Communities!
Cheers,
Braden

An error has occurred while loading the report

Hello all,
I'm trying to view a Crystal Report from my CRM application and I receive the follow error message, but only when trying to view it on a laptop:
An error has occurred while loading the report. Please contact technical support.
Has anyone else run into this problem?
Thanks!

Hello Eddie,
please post some more information about your problem.
What is the name of your CRM app?
Who developed this app?
Did it never work or do you get this error only now?
Always or only sometimes only?
In what versions and on what patchlevel are you working ?
Thanks for some more info
Falk

What does "Error 10" mean? "An error occurred while loading your project. 10"

Does anyone know what "Error 10" means? For the first time, I'm getting a message that says, "An error occurred while loading your project. 10". I'm getting this message when I try to open a project that I created yesterday.
I'm using Adobe Premiere 6 on a Windows 7 machine. I have over 20 gigs of open space on the drive with all the project and support files. And this machine with 2 gigs of RAM never has a problem opening other similar Premeire project files with even more still images plugged in.
All of my Premiere project files have always opened with no problem. A similar file that this project file was created from with all the same base elements still opens with no problem.
This file almost finishes the "Loading Project - checking files..." process, but then I get the error message.
I had also saved a duplicate backup file for the project in question and it will not open either, so I believe that rules out a corrupt file... it is only this one project that I created yesterday that will not open. This project file is only about 5.7 megabytes in size.
This file has many still images plugged in to it, but all the same images are plugged in to another base file that still opens correctly.
I've also tried closing all other apps to save memory but I still get the error. I've also tried opening this problem file from within the application and I still get the same error message.
I read some troubleshooting information on the Adobe website about files that give error messages that will not open and it recommended adjusting the size of the virtual memory paging file in the system settings to twice the amount of RAM that is installed instead of being on the automatic setting, so I followed the instruction verbatim and restarted my machine and I still get the error message.
I've also read other troubleshooting info on the Adobe site that recommends to "delete the application preferences file" and "recreate the plugin cache file", but I'm not sure if "Error 10" indicates that those things are the correct procedures to use.
I could re-create this project file, but it has many tricky cutting and motion setting edits that will be difficult to reproduce and it took me a full day to create this project file.
Also, yesterday before initially closing this file, I was able to successfully render a test version to an AVI file and that video file plays fine, but neither the original project file nor the duplicate will open... I'm always getting the "An error occurred while loading your project. 10" after the file almost finishes the "Loading Project - checking files..." process... it almost finishes opening but then I get the error message.
Thanks for any input on this problem. You can see the error message screenshot below.
digi

Thanks Bill... me too.
After writing to Dennis Radeke on an Adobe.com blog about this and getting his very limited response, I wrote to him quoting something I read on the wiki page that you sent me the link to...
Adobe blog:
http://http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html#co mment-2701
Wiki page link that you gave me:
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
Here's what my response today was...
Thanks for your reply DR.
My old version of Premiere 6 works perfectly on Windows 7. I’ve created over a thousand different Premiere project files on this 5 year-old PC that was updated to Windows 7 last year.
All of my other Premiere 6 files open and maintain their original editability and all the features in this ancient version of Premiere work very well.
I own and use mostly Mac machines but I have one 5 year-old PC with a 160 gig hard drive with Windows 7 that I run Premiere 6 on because it’s a thousand dollar program that I had from 10 years ago that I didn’t want to repurchase. Buying a newer PC 5 years ago was far less expensive than buying a new copy of Premiere. Some people seem to think, “Wow, just buy a new version of the software for a thousand dollars and a new computer with a 5 Terabyte hard drive.”, but that isn’t always the reality of some peoples financial situation.
With 20 gigs of open HD space, all of my previous, even more complex Premiere 6 files still open and edit just fine. It is only this one file that I created Thursday that won’t re-open after closing it for the first time. Since the backup copy of that file won’t open either, and all the support files open, play and work in other previous project files, I’m thinking that there is some glitch that happened when saving this file that is corrupting it now, making it unable to be re-opened.
Based on prior advice on multiple topics about Premiere 6 from people on the Adobe forum who use only newer versions of Premiere, most information that applies to the brand new Premiere Pro CS5 still seems to apply to the old Premiere 6.
I found that holding down Shift-Option while opening Premiere 6 trashes the preferences file. This became my work around since I can’t locate the preferences file based on your path noted (in your blog) nor via the other prefs file path published on the Adobe website.
But unfortunately, trashing the prefs file, resetting the plugin cache file, increasing the virtual memory paging file size, importing the problem project file in to a new project, nor anything else is working to allow this file to open.
Now I’m looking in to XML:Wrench to see if that can find the corruption in this file, but I’ve had a malware warning from one download source and the xmlwrench.com website says their download is only a demo version, but no price is listed… this seems somewhat strange and possibly deceptive.
But I read something on an Premiere Pro wiki page , quoted below, at this URL, that seems to be pertinent, and though my version of Premiere may be ancient, it seems that, according to this user’s concerns, Adobe is still having problems with current versions of Adobe software creating corrupt files…
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
QUOTE:
“Can someone please advise – why on EARTH we should have to download XML Wrench and manually fix a corrupt Adobe project??? This is something common to all the Adobe “Support” forums on issues like this, and the many others that plague Adobe’s product (and I’m not being a mindless troll – I’ve been forced to use it for years so I do know the usability and other issues it has): it seems that people are excited because they’ve found a “fix” (which is more like a work-around) – purely because they’re understandably ecstatic that all their hard work isn’t comPLETEly lost.
However, Adobe should be making sure their product isn’t so buggy! This issue should be fixed (as just one example). Adobe should be finding out what causes the corruption in the first place and fixing it. And whether it’s some other codec on the system that’s caused it is no excuse – their software should have better error management built into it. I’ve seen other issues where an Adobe support representative has happily replied: “oh, that’s a known issue since version [3 versions back] – don’t worry, most users are aware of the work around for it: just select and move all of the items in your timeline each time you open the project and you’ll be fine!”
I’m sorry to rant on – but can some other users please explain the above to me? (i.e. why aren’t more people annoyed about this and complaining to Adobe to fix these things).”
UNQUOTE
All of this coming from an experienced user of Adobe products complaining about needing XML:Wrench to fix corrupt Adobe files seems relevant.
In addition, why does no one, including the Adobe knowledge base, have any info about what “An error occurred while loading your project. 10″ means?… why isn’t there a database that identifies Adobe error numbers by the simple number itself? The only info I was able to find identifying “Error 10″ on the Adobe site was a software installation error, not a project loading error.
Now I find myself chasing a clean download of XML:Wrench in order to hopefully fix this corrupt file. Whether I’m using Premiere 6 on a 160 gig hard drive with 20 gigs of open space or Premiere Pro CS5 on a 5 Terabyte hard drive with 3 Terabytes of open space, the problems, according to other users, seem to be the same as ever with corrupt Adobe Premiere files, based on what I’ve been reading across the internet.

Exception occurred while loading _WL_TIMESTAMP FILE

Hi all,
I have an application packaged in a EAR file, but when I deploy through the Weblogic Server Administration console, i get a strange error:
<Error> <EJB> <BEA-010003> <Exception occurred while loading WLTIMESTAMP FILE.
java.io.FileNotFoundException: /opt/bea/domains/bpm/servers/BPMServer/cache/EJBCompilerCache/1bscgreimm37w/_WL_GENERATED (Too many open files)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.(FileInputStream.java:106)
at weblogic.ejb.container.deployer.EJBDeployer.getFileHash(EJBDeployer.java:464)
at weblogic.ejb.container.deployer.EJBDeployer.compileIfNecessary(EJBDeployer.java:586)
at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:1154)
Truncated. see log file for complete stacktrace
>
java.lang.NullPointerException
at weblogic.utils.FileUtils.remove(FileUtils.java:274)
Searching over the Oracle/BEA documentation i found this :
BEA-010003 Error: Exception occurred while loading WLTIMESTAMP FILE.
Description Exception occurred while loading WLTIMESTAMP FILE. Forcing recompilation: ioException
Cause The container generates WLGENERATED file, which stores the server version of the appc compiler. if the current server version is different from the version specified in WLGENERATED file, appc recompiles the beans. There was an error reading this file.
Action The container will automatically recompile the beans.
But if the container compiles the beans again, why in the deployments view, it doesn't work, and the application is never at Active state?
Any help is appreciated!
Thiago

Looking at your stack trace, I don't believe the issue is directly related to the WLTIMESTAMP file but rather it looks like you have hit the limit on the number of open file descriptors for your process (note that the stack trace says "Too many open files" immediately after reporting what file it failed to open). Looks like you either have an FD leak or your OS/shell limit on the number of open file descriptors allowed per process may be set too low for what you are trying to accomplish.

Apple TV2 throwing "An error occurred while loading this content"

Hi
I have purchased an Apple TV2 recently and tried to watch rental movies. Preview of all the movies working fine but after rental is consistently giving error "An error occurred while loading this content". I have 8Mbps line and can rent movies from my PC and also from iPad. But Apple TV is giving this error.It also gibe similar error while trying to watch video podcasts of bigger size. I have done the recent apple TV update but no luck. Frustrating. Any help from any one. I have now rentals on my Apple TV that can not viewed and going to expire in 3 weeks.
Regards
Anil

are you renting these movies directly from the appleTV or are you renting/downloading from iTunes on a computer then streaming to appleTV?

Sidecar.xml not uploading 'an error has occurred while loading sidecar.xml. Sidecar.xml is invald'

Hi all,
If anyone could throw some light as to why im receiving this error it would be hugely appreciated
'an error has occurred while loading sidecar.xml.
Sidecar.xml is invalid. Error #1090'
i've used this method for filling in all the fidly bits and ordering the folios for about a year now and never had any issues with it.. until i was about to publish our issue yesterday.... and of course a problem had to crop up..
I did update to the latest mandatory folio builder version, i wonder if this is the problem?
i have tried all the seeminly obvious solutions, logging in an out of the folio builder, resaving teh .xml file , restarting the computer. swearing.. none of them worked.. :S
Anyways thanks in advance

For the benefit of others searching for on this issue in the future, the problem was with the sidecar.xml document. One of the tags elements had an extra "<" in it, which resulted in the XML being malformed.
Neil

MFT-5031_Error occurred while reading metadata of file

Am facing the error below while using OMFT to transfer files to a remote FTP server.
Error occurred while reading metadata of file.
Action
Check the adapter properties and try again. If the problem persists, contact Oracle Support Services.
Error Description
MFTException [threadName=JCA-work-instance:JMSAdapter-0, errorID=a4322627-8aa5-4796-ae77-3e1576f2e3dc, errorDesc=MFT-5031_Error occurred while reading metadata of file [KE03122014FTSAF26336.AD2] from endpoint [FTPEndPoint: Host:[KRATESTSVR], Port:[5454], User:[Safcom], Folder:[/Files]]., cause=oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: file://wsdl/FileListing_ptt.wsdl [ FileListing_ptt::FileListing(part,part) ] - WSIF JCA Execute of operation 'FileListing' failed due to: Error in listing files in the remote directory. Error in listing files in the remote directory. Unable to list file in remote directory. ; nested exception is: BINDING.JCA-11430 Error in listing files in the remote directory. Error in listing files in the remote directory. Unable to list file in remote directory. Please make sure that the ftp server settings are correct. ]
Error Text
Error occurred while reading metadata of file [KE03122014FTSAF26336.AD2] from endpoint [FTPEndPoint: Host:[KRATESTSVR], Port:[5454], User:[Safcom], Folder:[/Files]].

Yes i am also running with same version 7.0(1) SR5 but
this error is showing me when i am configuring resources to a new agent if i go directly from RMCM it works fine
please let me know if some has solution on this.
Waiting for your replys.
Thanks & Regards

WPC Error- Cannot render container : An error occurred while loading the do

Dear All
we are on SP13 / EP 7 ..we have created sites using WPC and when we try to trasnport with GUIDSs we got to know that SP13 does not suport GUIDs ..so i have deplyoed SP14 WPC abd the interfase looks differnt and it gives erros ..again i undeployed the SP14 WPC and deployed the SP13 WPC , after that interfase looks ok but we are getting an error in when we try to edit pages through WPC..
following messgae appera when we open up a page to edit in WPC
Cannot render container : An error occurred while loading the document from the resource content
we found this exception in error log in Server..
couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
#1.5 #00145ECC9C6700780000002500000B80000463656B4E6BC6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(142)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###Couldn't read content with ID -1. Select again...#
#1.5 #00145ECC9C6700780000002600000B80000463656B4E78E6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###couldn't retrieve contents with id -1#
#1.5 #00145ECC9C6700780000002700000B80000463656B4E812B#1235187149283#com.sapportals.wcm.WcmException#sap.com/irj#com.sapportals.wcm.WcmException.WcmException(62)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Plain###couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
     at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.getInternalStream(DBContentInputStream.java:345)
     at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.<init>(DBContentInputStream.java:50)
     at com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.selectDocumentContent(BasicPersistenceDB.java:1632)
     at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:143)
     at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:95)
     at com.sapportals.wcm.repository.ContentImpl$ContentWithPrefetchedInputStream.<init>(ContentImpl.java:402)
Please tell us how to fix this error
regards
Buddhike

Need to upgarde to SP14

INS-08106: Unexpected error occurred while loading the 'InventoryUI'

Hello.
Have done alot of installs over time, but this error has me stymied. Here are the givens:
2-node Linux RHEL 5 OS
Will ASM over fiber (using ASMLib)
Attempting to install Oracle 11gR2 (11.2.0.3.0)
SSH is working and runcluvfy gives no errors on wither nodes.
When running through the installer, I am on the "specify Installation Location" menu.
I input Oracle Base: /apps/oracle
I input Software Location: /apps/grid/product/11.2.0/grid_1
I hit NEXT and afeter a short time, I get the following error:
INS-08106: Unexpected error occurred while loading the view 'InventoryUI' associated to state 'inventory.'
No further details are given.
I look in the install log for this run and see these last final lines (no errors appear in this log prior):
INFO: Gathering system details
INFO: Checking specified location on remote nodes... (btw - specified path DO exist w/correct perms/ownership)
INFO: size stimation for Completeinstall is 5632.0
INFO: Completed validating state <CRSInstallLocationUI>
INFO: Verifying route INVENTORY_ABSENT
INFO: Get view names [InventoryUI]
INFO: View for [InventoryUI] is oracle.install.ivw.common.view.InventroyUI@58046530
INFO: Initializing view [InventoryUI> at state <inventory>
INFO: Fetching existing UNIX groups
INFO: Terminating all background processes
INFO: Terminated all background procecces
SEVERE: [FATAL] [INS-08016] Unexpected error occurred while loading the view 'InventoryUI' associated to state 'inventory.'
CAUSE: No additional information available.
ACTION: Contact Oracle Support Services or refer to the software manual..
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:1032
INFO: Advice is ABORT
INFO: Adding ExitStatus FAILURE to the exist status set
INFO: Finding the most appropriate exist status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Grid Infrastructure
INFO: Unloading Setup Driver
I realize I can open an SR in MOS, but was hping that maybe someone in this forum had encountered this error previosly and might have some sugestions or a solution that worked for them. The only same error code in MOS relates to to:
Unexptected error occurred while loading the view 'GridPlugPlayInfoUI' associated to state 'GridPlugPlayInfoUI', but this has a fix in /etc/hosts, but is NOT the same error I am getting.
Thank you in advance for any help.
Matt

/etc/hosts file was ok as-is.
Here was the underlying problem that has now been fixed:
We had three user goups associated with user Oracle. They were oinstall, dba, and oper
In /etc/groups, "oper" was not present. During the install, but prior to the actual pressing of the "Install" button, check(s) are made between the groups tied to the installer user and what groups are associated with the same user in /etc/groups. Once "oper" was added to the /etc/groups file, the error disappeared and the install proceeded.
Problem solved. Thanks for any earlier inputs.
Matt

INS-08106] Unexpected error occurred while loading the view 'GridPlugPlayInfoUI'

Hi
I got the below error message while installing the Oracle 11g R2 Database Grid software on Oracle Linux 6.4 OS using vnc viewer.
"INS-08106] Unexpected error occurred while loading the view 'GridPlugPlayInfoUI' associated to state 'GridPlugPlayInfoUI'."
Please let me know how to overcome this error and proceed with the installation.
Contents of the error log file:
java.lang.NullPointerException
at oracle.sysman.oii.oiin.OiinNetOps.addNICInfo(OiinNetOps.java:144)
at oracle.sysman.oii.oiin.OiinNetOps.computeNICList(OiinNetOps.java:109)
at oracle.sysman.oii.oiin.OiinNetOps.<init>(OiinNetOps.java:76)
at oracle.sysman.oii.oiin.OiinNetOps.getNetOps(OiinNetOps.java:90)
at oracle.sysman.oii.oiix.OiixNetOps.getFullHostName(OiixNetOps.java:49)
at oracle.install.library.util.MachineInfo.getFullHostName(MachineInfo.java:109)
at oracle.install.library.db.RAC92Info.is92RACPresent(RAC92Info.java:115)
at oracle.install.ivw.crs.view.InstallTypeGUI.onEvent(InstallTypeGUI.java:120)
at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:508)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor.access$001(AbstractGraphicalFlowExecutor.java:39)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:99)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:98)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:458
oracle.install.commons.flow.FlowException: [INS-08106] Unexpected error occurred while loading the view 'GridPlugPlayInfoUI' associated to state 'GridPlugPlayInfoUI'.
at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:510)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor.access$001(AbstractGraphicalFlowExecutor.java:39)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:99)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:98)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: java.lang.NullPointerException
at oracle.install.library.crs.CRSInfo.getDefaultIPAddressForGNSVIP(CRSInfo.java:584)
at oracle.install.ivw.crs.view.GridPlugPlayInfoUI.onEvent(GridPlugPlayInfoUI.java:373)
at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:508)
... 12 more
---# End Stacktrace #-----------------------------

Hello,
It's a Bug.
Try selecting all languages and give a try ...
Bug 9632373: UNEXPECTED ERROR OCCURRED WHILE LOADING THE VIEW 'GRIDPLUGPLAYINFOUI'
<Moderator Edit - deleted MOS Doc content - pl do not post such content - it is a violation of your Support agreement>
Thank you

Alert occurred while loading metadata

Similar Messages

Maybe you are looking for