Alert rules not displaying correctly in the RWB after transporting to QA

Hi Experts,
After transporting the alert rules from DEV to QA, the rules are not correctly displayed in the RWB in QA e.g. a star (*) is displayed in all the fields instead of the filter values which I have entered such as the "Sender Party"; "Sender Interface" etc. I am also not able to manually change the values in the RWB in QA anymore because the values are greyed out.
Strangely enough, the rules are correctly displayed inside the SXMSALERTRULES table in QA.
Do you perhaps know how to solve this issue so that the rules are also correclty displayed in the RWB after transporting?
Thanks and regards
Brendon

Having the same problem and looking for fix...

Similar Messages

Small caps not displaying correctly in the ePub file

Hello All,
I am using cs5.5 to generate ePub file, and I found that small caps contents not displaying correctly in the generated ePub file even the CSS looks correct. Please check and confirm, if anyone faced this issue? Also other formatting components are looks fine in the ePub file.
Thanks,
Praveen

@Jongware/Bob, thanks for your responses, I checked the ePub output using 'Adobe Digital Editions', and getting the same issue in 'Calibre', but in 'Sigil', it looks fine.
In CSS it has been declared like below:
span.SmallCaps {
font-variant : small-caps;
Here 'SmallCaps' is the character style applied for the 'small caps' contents.
Thanks,
Praveen

Link URL containing feed: is not displayed correctly in the status bar

When a link contains feed: in the URL, it is not displayed correctly in the status bar.
The actual URL is
a href="feed:http://www.....com/feed/"
but the URL shown in the status bar is
feed://http//www.....com/feed/
IE8 shows the correct URL in the status bar. Not sure if this is a problem, but thought I would report it.

Such a feed works for me even if it is displayed differently then you expect on the status bar.
<pre><nowiki>data:text/html,<a href="feed:https://support.mozilla.com/en-US/questions/758020/feed">feed</a></nowiki></pre>

Hierarchy variable inpu help not displayed correctly in the portal

Hi ,
I have a problem when trying to select Hierarchy in the variable selection screen hierarchy is not being displayed
correctly in the portal/browser . When running the same report in BEX Analyser and in RSRT with HTML option the
hierarchy displays correctly in the variable selection screen .
In Portal Var selection screen Hierarchy is displayed side by side ie horizontally not level by level.
Please help.

Thanks Venkat, Problem is solved with the note u mentined

Gmail usernames and passwords not displaying correctly - is the issue with Firefox?

I have 3 email accts and when I click username in Gmail those 3 would show and passwords would be remembered automatically. Now it shows these 3 and 2 others that have been used before, plus NO passwords displayed. In the past if this happened I refreshed page and it went back to the 3 accts - this is no longer happening. Could it be a firefox issue?
Also my autofill in Gmail is no longer working and I have seen other inquiries about that. Is there any info on how to fix these???

This is a known issue in Firefox 4 beta 12. You could wait til' the RC comes out, or you could grab one of the latest nightly builds availible here that fix this problem: ftp://ftp.mozilla.org/pub/firefox/nightly/latest-mozilla-central/
Just a note though, nightly versions of firefox are generally less stable than betas or releases. I am waiting for the Release Candidate to come out myself. (Should be early next week)

Main Sub not displayed correctly on the FPL9

Hello Experts,
We have requirement to credit the GL account only after payment is received against the specific receivable e.g. $ 20 charge posted on the account and $ 18 payment clears the charge partially then crediting the GL account for $ 18. In order to achieve this we are using statistical posting logic. First defined main sub (e.g. Statistical 00XX 00AA) with statistical key 'G' and mapped these statistical sub to real subs using posting area 1010 (e.g. Real 00XX 00BB). Also defined liability GL account for these real subs (00XX 00BB) in EK02 and in FQZB (against MAIN transaction "00XX" and not against SUBs). Now, the problem is - payment clears the $ 20 charge correctly, it credits the liability GL correctly, and it also updates tables such as DFKKOP with required new entry of (REAL SUB i.e. 00XX 00BB) line but it doesn't show that line correctly on the FPL9 screen. It shows cleared $ 18 line item with statistical MAIN SUB (00XX 00AA).
Am I missing something here? Could you please help me to resolve this issue. Please also let me know if you think there is better way to address this requirement.
Regards,
A-jay.

Hi Dany,
It sound like tyou are trying to localize your application to Japanese. You might want to take a loot at this link here
Joe Daily
National Instruments
Applications Engineer
may the G be with you ....

Leave not displaying correctly on the Portal.

Hi,
The leave displayed in IT 2006 and PT50 are more than what is displayed on the Portal.

Hi
pls check if your portal is pointing to the correct backed system, also check if you refresh the ivew does it change.
Regards
sameer

4x3 format SD tape import looks ok on monitor , but, the DVD produced does not display correctly ? The format looks slightly thinner in width?

I have been archiving old Hi- 8 SD tape and when displayed on the PC monitor looks right. And looks correct on a TV Monitor.
But, the DVD when produced looks right on a TV monitor but, thinner when imported back as a DVD into Adobe Premiere Pro , how can I adjust this ? I know a 1,000pixels instead of 720 would fix the issue, i have checked it in Photoshop.
I have others that need extra editing, as the previous Sequences have been removed from the computer ?

usually this is caused by pixel aspect ratio. premiere usually reads it properly, but if it doesn't you can change it to a new value. in the project bin, right click the file(s) and choose modify, interpret footage. there is an option for pixel aspect ratio, you can try some till one looks right. the 1.21 or 1.45 might do what you are looking for...

Fonts not displaying correctly in the Character panel.

This is a problem i have across most of my cs6 applications in particular Illustrator but also in photoshop and indesign.
It started after i upgraded my mac to OS X Yosemite from Mountain Lion, i had read else where about it being an issue in cs5 with the new transparency feature of Yosemite and that by checking reduce transparency in the accessibility options that the problem would be solved. This worked partially to correct the problem but there are still glitches with the drop down font preview menus. I have included some screen shots of how the menus look the first is from photoshop and the second from illustrator both after i have checked the reduced transparency option in system preferences.

Having the same problem and looking for fix...

Documents and spreadsheets not displaying correctly on the task bar

When I open a series of documents or excel spreadsheets, quite often they will appear as blanks on the task bar and I have to right click - restore to be able to see a preview or select them for editing. If I do normal left click on the document nothing
happens and they stay blank.
If I could get a picture of my desktop loaded it would show the cursor on MS word on the taskbar then above the taskbar a preview of the 4 sessions - 2 have documents you can see and 2 are blank. THe first 2 I had to right click restore to be able to see.
THe other 2 will be blank until I right click then restore

Hi Tmac4x4，
Please share us a screenshot as arnavsharma mentioned.
Please open the event viewer and check if there are any related error log. For more information about the event log, please refer to the following KB.
http://support2.microsoft.com/kb/308427
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Oracle 10g Taskbar not displaying to see the error after running the form in explorer

Hi
1- When we compile and run the form in forms 10g output in Internet Explorer and Avant Browser. can not see teh taskbar to see the error message, how to check the error when you run the forms in explorer there is no taskbar under the forms
2- When we compile and run the form in forms 10g output is displayed. ... Background has an "Oracle logo" where is the location of this Logo
Watiing for reply thanks.

Leopard007 wrote:
1- When we compile and run the form in forms 10g output in Internet Explorer and Avant Browser. can not see teh taskbar to see the error message, how to check the error when you run the forms in explorer there is no taskbar under the forms
Check the Module property: Console Window. If this property is null, then the Status Bar will not be displayed during runtime. You have to set this property for each form.
Leopard007 wrote:
2- When we compile and run the form in forms 10g output is displayed. ... Background has an "Oracle logo" where is the location of this Logo
The "Splash.gif" is located in the frmall.jar file. What is it you want to do? Do you want to use a different spash image during application startup? If yes, you can display a different startup splash image by using the splachScreen= parameter in the formsweb.cfg file. The replacement .gif file must be located in the directory specified in the imageBase= parameter. Keep in mind that this file will need to be signed or you will get a security warning.
Craig...

Wordpress sites are not displaying correctly on my mac after mountain lion upgrade (on all browsers - chrome, safari, firefox)

I am having trouble viewing anything that is on wordpress, including the wordpress site. This means I cannot view my own wordpress blog too properly - no images are viewable, only plain text and hyperlinked text. This happened immediately after I upgraded to Mountain Lion. My Mac is mid-2010. Everything else works fine. Thanks.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Music app does not display some of the artists' names correctly

It's so annoying. I have a few artists, whose names are not displayed correctly by the music app. In the following, I'm gonna take the band "Annisokay" as an example.
I, first of all, had this artist named as "annisokay". Everything was alright. Today, I decided it would look better with a capital A, so I changed the name to "Annisokay". I synced my iPhone with iTunes and checked the music app afterwards: In the music app, the name is still displayed as "annisokay". I connected the iPhone to my MacBook again and checked the "On this iPhone" tab in iTunes. There, the name is correctly displayed as "Annisokay".
I've tried deleting all the music on the iPhone and syncing it again, restarting my iPhone, deleting the music from iTunes and importing it again, changing the names to some gibberish and changing it back again, but nothing worked!!
So, to sum up, whatever I'm trying, in the end the artist's name (Artist & Album Artist) is defined as "Annisokay" and is displayed like that in iTunes itself and in the "On this iPhone" tab, but in the music app on the iPhone it's "annisokay". That's very annoying. Has anybody else ever encountered this problem? Is there someone who can help me to solve it?

Hi Phani
Attached please find the ini file as requested.
I look forward to your response.
Kind regards
Mark
Geometric Progression
Cutting thru complexity
Tel: (+2721) 794 8332 or (0861) 000-615
Fax: (+27 11) 252 8089
Website: <http://www.gpifm.com/> http://www.gpifm.com
Authorised FSP (Licence No: 43224)
Bankseta accredited (No:557066)
BOTA accredited
<http://lnkd.in/sybY4S> linkedin3

Umlauts not displayed correctly

Hi,
We have developed a screen in 12.1 and the umlauts (German & Spanish) are not display correctly. Is there a language pack / custom actions we need deploy for this to work properly?
Regards,
Chanti.

Its those special characters with a pair of dots on their head, like ä etc. These are not being displayed properly in the Web UI screens after upgrading to 12.1.
These special characters are coded in the alert/warning/error messages in a .js file. Two things here -
i) When we did the migration from 11.5 to 12.1, those got transformed to a [] (read squarebox) sorts. Are these something that the migration tool can't handle as desired?
ii) We fixed these characters manually in the code in 12.1. But when we run the script they are still not displayed correctly in the Web UI, for instance ä is being displayed as A~, something like that. Wondering if we need to deploy some custom actions or add a line at the top of .js or .html code?
Regards,
Chanti.

HTML Content not displayed correctly in UWL

Hi all,
I have setup UWL to connect to SRM 5.0 system. I have no problem retrieving alerts from the backend. However, alerts with HTML content are not displayed correctly in the UWL. Instead of parsing the HTML content, the html tags are displayed instead.
Am I missing some configurations here?
Thanks in advance.

Hi Benny;
Please see:
My Oracle Support FAQ [ID 747242.5] << What are the browser requirements for accessing My Oracle Support?
If you have still problem you can go wiht SR
Regard
Helios

Alert rules not displaying correctly in the RWB after transporting to QA

Similar Messages

Maybe you are looking for