Alert subscription data source module encountered errors while running

Hello All,
After I configured subscriptions with many monitors, error alerts appear at SCOM(scom 2012 r2) console in active alert page.
I googled it and found some topics at TechNet but I could not figure it out. Alert description is shown below
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: The incoming request has too many parameters. The server supports a maximum of 2100 parameters. Reduce the number of parameters and resend the request.
One or more workflows were affected by this.
Workflow name: Subscriptioneaa7b044_b3c1_4198_be71_ffaaf66a163f
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: STS
Any idea?
Thanks

As I understand, this issue occurs and remains after I configure a subscription with too many rules and/or monitors( i.e al available rule and/or monitor of a management pack).
After I had deleted those subscription with many rule/monitor, this issue was resolved.
Any idea?

Similar Messages

Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

Hi, We recently started getting these errors a couple times a day. There are 12 of them in total. We also have exactly 12 subscriptions. Does this indicate some db issue causing all of these
to fail?
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: Subscription8b108a3e_4e3d_4fd0_b67e_cbfc21cd10b8
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: A Company Management Group
Thanks Lance

Hi,
Do you have hotfixes applied?
http://blogs.technet.com/kevinholman/archive/2009/01/27/which-hotfixes-should-i-apply.aspx
Also, I found a relevant thread for your reference.
Alert subscription data source module encountered errors while running</u1:p>
http://social.technet.microsoft.com/Forums/systemcenter/en-US/50557249-7f97-4b67-9729-f7088202385b/alert-subscription-data-source-module-encountered-errors-while-running?forum=operationsmanagergeneral</u1:p>
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

We have been seeing this error in the Operations Manager Event Log for quite a while.
Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: MMEA_1348391424
Instance name: aaa.bbb.com
Instance ID: {88AED57C-5627-0C0B-E5C1-A9176A7E64CD}
Management group: SCOMr2
I haven't been able to spot any network outage on the management servers, or the database servers to indicate a problem. It usually happens at night, and when I look at the health explorer, the entity is healthy.
Please would someone help me in finding the root cause of this issue and what can be done to avoid it.
There were no backups running when this alert was generated. As far as I'm aware, everything was idle.
I would appreciate any help.
Karan

Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
Based on the Error it seems the below for me
1. Either SCOM is unable to connect to the operationsmanager / operationsmanagerDW for its transactions on subscriptions
2. Or the SMTP server which your SCOM is using to relay emails has closed the connection.
So my suggestion would be you check the above for issues.
Gautam.75801
There were no network hiccups that I can see. Minimal disk activity. I've looked for any signs of database load, and haven't seen anything that jumps out.
Emails were going through just fine. These alerts get emailed to me, and if the SMTP server is 'closed' SCOM is usually quite sensitive and alerts about that too. I've seen it.
KB

Event 33618, SMCMDB Subscription Data Source Module

I have been searching throughout the forums, and I have not been able to find anything that is related to this error code
"The database subscription notification could not be authorized. Notifications will be sent without authorizing the subscription's owner for the instances being notified.
The following errors were encountered:
Exception message: Subscription runtime found instances that were unauthorized for the subscription's owner. Change the owner's user role scope to include the instances or change the subscription criteria to filter by groups or queues that the subscription's
owner is allowed to see. Notifications will be sent without authorizing the subscription's owner for the instances being notified.
Subscription id: 1f1618b8-b618-8998-2731-55627bab6900
UnauthorizedIds: 92d033a4-a78a-0b69-1aa9-7a71c7177e52, ae11c594-6c82-bd5d-cac5-1229ee4445aa
One or more subscriptions were affected by this.
Subscription name: WorkflowSubscription_e9605630_af8c_4cb9_958c_1b129870b4d9
Instance name: SLA Workflow Target: SR - Low Priority
Instance ID: {7DB92431-99C1-7DC7-3E2F-F3DDF78E43B6}
I am seeing a few of theses every now and then, but i am not able to pinpoint the "UnauthorizedIds" Has anyone run into this error or know how to search by IDs maybe by like powershell or from the console? It doesn't seem to be impacting performance
or holding up any workflows. I was just wanting to find out what is generating this event.

Well, this look like someone has set up a subscription, probably in personal notifications, that is trying to read data from an object that the person doesn't have access to. I've never seen this error before, but that's probably because i advise all of
my clients to avoid the condition where analyst do not have at least read access to any config item or work item, for the reason that people who can't see things in the database can't answer user's questions about the item they can't see.
you can probably find the objects that are causing this issue using the following PowerShell command from the
SMLets
Get-SCSMObject -ID $Guid

SAP BW Bex Queries as Data source WIS 10901 Error while refreshing

Hi,
I have created a Web Intelligence report based on Universe upon SAP BEx queries.
When I refresh the report, I get the following error:
A database error occured. The database error text is: the supplied XML is not valid. [Measures].[4ASYKV5XU5T].(WIS 10901)
Report was fine for a day. I started showing error from today.
This is my first report and Universe based on SAP BEx queries. I do not have knowledge of SAP system as well.
Please help.
Nanda Kishore B

Hey Nanda kishore B,
It is because that Measure object definition changed @BEx. Measures.4ASYKV5XU5T
Can you check @BEx query for any latest changes??
OR
Go to Universe Designer:
1. Open Universe
2. View == Refresh Structure
3. Can you see any updates now?? OK
4. Save Universe
5. Export it
Now open the Report. It will work now, if all Objects are there at Bex query & Universe level.
Along with this Do integrity check @Universe also before exporting.
Gracias...!!
Let's play with Aurora (BO XI 4.0)

Service Check Data Source Module Events

Hello,
I seem to keep having this alert the event number is 11771, i could really use some help here on how to fix this issue if possible.... these errors are being generated from SCE BY SCE
Thanks,
Danny
Date and Time:
2/4/2010 5:19:14 AM
Log Name:
Operations Manager
Source:
Health Service Modules
Generating Rule:
Collect Service Check Data Source Module Events
Event Number:
11771
Level:
Warning
Logging Computer:
sce01.xxxxxx.com
User:
N/A
Description:
Error getting state of service
Error: 0x8007007b
Details: The filename, directory name, or volume label syntax is incorrect.
One or more workflows were affected by this.
Workflow name: Microsoft.SQLServer.2008.DBEngine.FullTextSearchServiceMonitor
Instance name: ESSENTIALS
Instance ID: {023CAC69-7B83-207A-5F48-D808815B4919}
Management group: SCE01_MG
Event Data:
View Event Data
< DataItem type =" System.XmlData " time =" 2010-02-04T05:19:14.0140371-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > SCE01_MG </ Data >
< Data > Microsoft.SQLServer.2008.DBEngine.FullTextSearchServiceMonitor </ Data >
< Data > ESSENTIALS </ Data >
< Data > {023CAC69-7B83-207A-5F48-D808815B4919} </ Data >
< Data > 0x8007007b </ Data >
< Data > The filename, directory name, or volume label syntax is incorrect. </ Data >
</ EventData >
</ DataItem >

also here's this weeks critical errors from SCE by SCE
Date and Time: 2/24/2010 9:55:44 AM
Log Name: Application
Source: Windows Server Update Services
Event Number: 13002
Level: 1
Logging Computer: sce01.xxxxxxxxxx.com
User: N/A
Description:
Client computers are installing updates with a higher than 25 percent failure rate. This is not normal.
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T09:55:44.1666165-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > Client computers are installing updates with a higher than 25 percent failure rate. This is not normal. </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 4:25:43 PM
Log Name: Operations Manager
Source: Health Service Modules
Event Number: 11852
Level: 2
Logging Computer: sce01.xxxxxxxxxxxxxxxx.com
User: N/A
Description:
OleDb Module encountered a failure 0x80004005 during execution and will post it as output data item. Unspecified error : Login timeout expired Workflow name: Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor Instance name: sce01.xxxxxxxxxxx.com Instance ID: {5B7CC866-45FF-A2AE-8D33-0AC661F68861} Management group: SCE01_MG
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T16:25:54.2642632-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > SCE01_MG </ Data >
< Data > Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor </ Data >
< Data > sce01.xxxxxxxxxxx.com </ Data >
< Data > {5B7CC866-45FF-A2AE-8D33-0AC661F68861} </ Data >
< Data > Login timeout expired </ Data >
< Data > 0x80004005 </ Data >
< Data > Unspecified error </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 10:47:13 AM
Log Name: Operations Manager
Source: Health Service Script
Event Number: 4001
Level: 1
Logging Computer: sce01.xxxxxxxxxxxxxxx.com
User: N/A
Description:
GetSQL2008BlockingSPIDs.vbs : Cannot login to database [sce01.xxxxxxxxxxxxxxx.com][ESSENTIALS:master] .
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T10:47:15.8121021-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > GetSQL2008BlockingSPIDs.vbs </ Data >
< Data > Cannot login to database [sce01.xxxxxxxxxxxxx.com][ESSENTIALS:master] . </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 10:46:05 AM
Log Name: Operations Manager
Source: Health Service Modules
Event Number: 11852
Level: 2
Logging Computer: sce01.xxxxxxxxxxxx.com
User: N/A
Description:
OleDb Module encountered a failure 0x80004005 during execution and will post it as output data item. Unspecified error : [DBNETLIB][ConnectionOpen (PreLoginHandshake()).]General network error. Check your network documentation. Workflow name: Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor Instance name: sce01.xxxxxxxxxxxxx.com Instance ID: {5B7CC866-45FF-A2AE-8D33-0AC661F68861} Management group: SCE01_MG
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T10:47:14.1579111-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > SCE01_MG </ Data >
< Data > Microsoft.SystemCenter.SqlBrokerAvailabilityMonitor </ Data >
< Data > sce01.xxxxxxxxxxxxxxxxxxx.com </ Data >
< Data > {5B7CC866-45FF-A2AE-8D33-0AC661F68861} </ Data >
< Data > [DBNETLIB][ConnectionOpen (PreLoginHandshake()).]General network error. Check your network documentation. </ Data >
< Data > 0x80004005 </ Data >
< Data > Unspecified error </ Data >
</ EventData >
</ DataItem >
Date and Time: 2/24/2010 3:50:12 PM
Log Name: Operations Manager
Source: Health Service Modules
Event Number: 31400
Level: 1
Logging Computer: sce01.xxxxxxxxxxxx.com
User: N/A
Description:
An exception occured processing a group membership rule. The rule will be unloaded. Subscription ID: 1ac6ba80-bb85-4699-82a2-f3c584b06965 Rule ID: bb91657f-32db-4f72-2ed6-e7ac94f0e167 Group ID: b20e0f37-c8d3-afcc-e21e-473b019fd826 Group type name: Microsoft.Dynamics.AX.Management.Pack.DynamicsServer.Group Exception: Microsoft.EnterpriseManagement.Common.DataAccessLayerException: Invalid property name: IsDynamicsInstalledAttribute_CE6F4AC6_0A15_BE42_323A_65A3BC8AB307 at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.GetColumnDefinitionForProperty(String propertyName, QueryDefinition queryDefinition) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateWithProperty(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicate(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.CreateCriteriaTextAndParameters(SqlCommand sqlCommand, QueryDefinition queryDefinition, XmlReader criteriaReader, XmlNamespaceManager xmlNamespaceManager) at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlCommandBuilder.CreateCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, String criteriaXml, Dictionary`2 parameterValues) at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.CreateSqlCommandForSelectType() at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.QueryGenerator.ExecuteSnapshotQuery(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.EligibleBySnapshotResults(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.GetRelationshipChangesForSnapshot(MembershipRule membershipRule, Guid groupInstanceId, Guid groupTypeId, Guid relationshipId, IList`1 groupKeyNameValuePairs, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateSnapshot(MembershipSubscription subscription, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipCalculationManager.SnapshotCalculation(MembershipSubscription membershipSubscription, DatabaseConnection databaseConnection)
Event Data:
< DataItem type =" System.XmlData " time =" 2010-02-24T15:50:12.2844774-06:00 " sourceHealthServiceId =" 5B7CC866-45FF-A2AE-8D33-0AC661F68861 " >
< EventData >
< Data > 1ac6ba80-bb85-4699-82a2-f3c584b06965 </ Data >
< Data > bb91657f-32db-4f72-2ed6-e7ac94f0e167 </ Data >
< Data > b20e0f37-c8d3-afcc-e21e-473b019fd826 </ Data >
< Data > Microsoft.Dynamics.AX.Management.Pack.DynamicsServer.Group </ Data >
< Data > Microsoft.EnterpriseManagement.Common.DataAccessLayerException: Invalid property name: IsDynamicsInstalledAttribute_CE6F4AC6_0A15_BE42_323A_65A3BC8AB307 at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.GetColumnDefinitionForProperty(String propertyName, QueryDefinition queryDefinition) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicateWithProperty(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParsePredicate(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 typeContextId, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.ParseCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, Nullable`1 managedTypeIdContext, XmlReader criteriaReader) at Microsoft.EnterpriseManagement.Mom.DataAccess.ParameterizedCriteriaBuilder.CreateCriteriaTextAndParameters(SqlCommand sqlCommand, QueryDefinition queryDefinition, XmlReader criteriaReader, XmlNamespaceManager xmlNamespaceManager) at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlCommandBuilder.CreateCriteria(SqlCommand sqlCommand, QueryDefinition queryDefinition, String criteriaXml, Dictionary`2 parameterValues) at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.CreateSqlCommandForSelectType() at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.QueryGenerator.ExecuteSnapshotQuery(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.EligibleBySnapshotResults(MembershipRule membershipRule, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.GetRelationshipChangesForSnapshot(MembershipRule membershipRule, Guid groupInstanceId, Guid groupTypeId, Guid relationshipId, IList`1 groupKeyNameValuePairs, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateSnapshot(MembershipSubscription subscription, DatabaseConnection databaseConnection) at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipCalculationManager.SnapshotCalculation(MembershipSubscription membershipSubscription, DatabaseConnection databaseConnection) </ Data >
</ EventData >
</ DataItem >

Concurrent manager encountered an error while running sql*plus for your concurrent request create internal order

Hi
We have a big problem, We can't create internal orders, when I run the CREATE INTERNAL ORDER, it finish with ERROR:
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
this is the log:
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POCISO module: Create Internal Orders
+---------------------------------------------------------------------------+
Current system time is 26-JUL-2013 09:21:09
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
Begin create internal sales order
Updating Req Headers
14 Reqs selected for processing
Top of Fetch Loop
Source Operating Unit: 82
Selecting Currency Code
Currency Code : MXP
Selecting Order Type
Order Type ID:1001
Selecting Price List from Order Type
Deliver To Location Id: 196
Inserting Header : 3908784
Getting the customer id
Getting the customer id: 15334
Unhandled Exception : ORA-01403: no data found
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
78
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 26-JUL-2013 09:21:14
+---------------------------------------------------------------------------+
Some suggestion for resolve it??
Thanks & Regards.

In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
If yes, please let me know the path and command to set the kernel value.
Thanks
Amith

Concurrent Manager encountered an error while running Oracle*Report

Hi,
I Ran a request and request is erroring out.Request ID 2727080
when i tried to review the log message it says
ar60run: relocation error: /apps/visora/8.0.6/network/jre11/lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
I'm attaching the log file below. Please suggest me the possible outcome.
Inventory: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
INVORGES module: Organization Hierarchy Exceptions Report
Current system time is 22-FEB-2008 12:37:32
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_LEGAL_ENTITY_NAME='India_Legal'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/apps/visora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to: /apps/visora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 17600
ar60run: relocation error: /apps/visora/8.0.6/network/jre11/lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 127
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 2727080.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 22-FEB-2008 12:37:32
Thanks
Amith

In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
If yes, please let me know the path and command to set the kernel value.
Thanks
Amith

BAM Deployment error - Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. --- Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "ServerName".

HI,
I am getting below error while deploying BAM activity ...Pls help me resolve this issue.
Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. ---> Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server
"ServerName". ---> System.Data.SqlClient.SqlException: An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or
[] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed.
Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias
to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An
object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column
name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing
or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For
SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements,
verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column
has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For
other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements,
look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock,
Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at
System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean
sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteBatches(String cmdText) at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String
cmdText, CommandType cmdType, Boolean inTransaction, Transaction transaction) --- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String cmdText, CommandType cmdType, Boolean inTransaction,
Transaction transaction) at Microsoft.BizTalk.Bam.Management.ViewModule.Create(XmlDocument defXmlDoc) at Microsoft.BizTalk.Bam.Management.WorkerModule.DispatchOperation(OperationType operation, XmlDocument defXmlDoc) at
Microsoft.BizTalk.Bam.Management.BamManager.ProcessOneBamArtifactType(BamArtifactType bamArtifact, OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.ManageInfrastructure(OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.Deploy()
--- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.BamManager.Deploy() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.HandleDeployAll() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.DispatchCommand()
at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Run() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Main(String[] args)

Your View Name, OLAP Cube Name and certain other restrictions listed @http://msdn.microsoft.com/en-us/library/aa561577.aspx
Please review your BAM Definitons.
Regards.

ORA-03147 error while running Alert

I am getting “ORA-03147: Missing mandatory TTC field” error while running an alert. I can share error screenshot and the alert query, if needed. (not putting right now as the query is huge)
Please note that alert query runs perfectly fine in PLSQL Developer.
Any prompt suggestion/help is appreciated.

Please find the alert query and error screenshot at below links:
https://docs.google.com/leaf?id=0B6W2rsWyyNGMMmJhNjQ5OTAtZGM1Ni00ZTY3LWJmNTEtM2RiYmUyYmJiNzFl&hl=en_US
https://docs.google.com/document/d/1yseUqYQYYPwnoMhnN1s1WFpkb1FjpWLniALGTHdhzfw/edit?hl=en_US
I cannot access the files in the above links.
Thanks,
Hussein

Concurrent Manager encountered an error while running Oracle*Report for you

hi
our team is running a report.but encountered
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DELV_ID='8022'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.0.2 - Production on Mon Jun 21 11:26:16 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 451508.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Beginning post-processing of request 451508 on node DEMO at 21-JUN-2010 11:26:17.
Post-processing of request 451508 failed at 21-JUN-2010 11:26:17 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 21-JUN-2010 11:26:17
+---------------------------------------------------------------------------+how to solve it?when i am searching in this error in cmctl log there is nothing for it.
i have lnched a SR on this they told to run it by appsrwrun.sh.how to run this report by appsrwrun.sh??
rgrds
Edited by: new2appsdba on Jun 21, 2010 4:19 AM

Hi,
how do you suspect its a OPP related issue??what is OPP?
Enter value for request_id: 451508
old   5: AND fcpp.concurrent_request_id = &&request_id
new   5: AND fcpp.concurrent_request_id = 451508
    REQ_ID NODE_NAME
LOGFILE_NAME
    451508 DEMO
/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[demoap@demo ~]$ vi /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[6/20/10 1:37:36 PM] [main] Starting GSF service with concurrent process id = 94508.
[6/20/10 1:37:36 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[6/20/10 1:37:37 PM] [Thread-16] Service thread starting up.
[6/20/10 1:37:37 PM] [Thread-15] Service thread starting up.
[6/21/10 11:12:00 AM] [OPPServiceThread0] Post-processing request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Executing post-processing actions for request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Starting XML Publisher post-processing action.
[6/21/10 11:12:00 AM] [94508:RT451495]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:12:00 AM] [UNEXPECTED] [94508:RT451495] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451495.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:12:00 AM] [94508:RT451495] Completed post-processing actions for request 451495.
[6/21/10 11:22:27 AM] [OPPServiceThread0] Post-processing request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Executing post-processing actions for request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Starting XML Publisher post-processing action.
[6/21/10 11:22:27 AM] [94508:RT451505]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:22:27 AM] [UNEXPECTED] [94508:RT451505] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451505.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:22:27 AM] [94508:RT451505] Completed post-processing actions for request 451505.
[6/21/10 11:26:17 AM] [OPPServiceThread1] Post-processing request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Executing post-processing actions for request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Starting XML Publisher post-processing action.
[6/21/10 11:26:17 AM] [94508:RT451508]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:26:17 AM] [UNEXPECTED] [94508:RT451508] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451508.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
                                                              at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:00:59 PM] [94508:RT451533] Completed post-processing actions for request 451533.
[6/21/10 12:17:51 PM] [OPPServiceThread0] Post-processing request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Executing post-processing actions for request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Starting XML Publisher post-processing action.
[6/21/10 12:17:51 PM] [94508:RT451573]
Template code: XXWEBB_EXP_INV
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 12:17:51 PM] [UNEXPECTED] [94508:RT451573] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451573.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:17:51 PM] [94508:RT451573] Completed post-processing actions for request 451573.
[6/21/10 12:19:19 PM] [OPPServiceThread0] Post-processing request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Executing post-processing actions for request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Starting XML Publisher post-processing action.
[6/21/10 12:19:19 PM] [94508:RT451577]
Template code: WILEXINVREP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[062110_121919525][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[062110_121919526][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[062110_121919526][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[062110_121919526][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=demo.webbindia.com)(PORT=1527)))(CONNECT_DATA=(SID=DEMO)))]
[062110_121919527][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[062110_121919527][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[062110_121919528][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[062110_121919528][][EXCEPTION] [DEBUG] [APPLTMP]:[/t01/demoap/inst/apps/DEMO_demo/appltmp]
[062110_121919528][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[062110_121919528][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.version]:[1.5.0_08-b03]
[062110_121919528][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[062110_121919528][][EXCEPTION] [DEBUG] [dbcfile]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[062110_121919528][][EXCEPTION] [DEBUG] [path.separator]:[:]
[062110_121919528][][EXCEPTION] [DEBUG] [APPLCSF]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Server VM]
[062110_121919528][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[062110_121919528][][EXCEPTION] [DEBUG] [user.country]:[US]
[062110_121919529][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[062110_121919529][][EXCEPTION] [DEBUG] [user.dir]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log]
[062110_121919529][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.5.0_08-b03]
[062110_121919529][][EXCEPTION] [DEBUG] [CLIENT_PROCESSID]:[30369]
[062110_121919529][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[062110_121919529][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/endorsed]
[062110_121919529][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[062110_121919529][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919529][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[/tmp]
[062110_121919529][][EXCEPTION] [DEBUG] [line.separator]:[
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[062110_121919529][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[062110_121919529][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919530][][EXCEPTION] [DEBUG] [cpid]:[94508]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.jnu.encoding]:[UTF-8]
[062110_121919530][][EXCEPTION] [DEBUG] [oracle.apps.fnd.common.Pool.leak.mode]:[stderr:off]
[062110_121919530][][EXCEPTION] [DEBUG] [java.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386/server:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/../lib/i386:/t01/demoap/apps/tech_st/10.1.3/lib32:/t01/demoap/apps/tech_st/10.1.3/lib:/t01/demoap/apps/apps_st/appl/cz/12.0.0/bin:/t01/demoap/apps/apps_st/appl/iby/12.0.0/bin:/t01/demoap/apps/apps_st/appl/pon/12.0.0/bin:/t01/demoap/apps/apps_st/appl/sht/12.0.0/lib]
[062110_121919530][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[062110_121919530][][EXCEPTION] [DEBUG] [java.class.version]:[49.0]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.management.compiler]:[HotSpot Server Compiler]
[062110_121919530][][EXCEPTION] [DEBUG] [queue_appl_id]:[0]
[062110_121919530][][EXCEPTION] [DEBUG] [os.version]:[2.6.18-164.11.1.el5xen]
[062110_121919530][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[062110_121919530][][EXCEPTION] [DEBUG] [user.home]:[/t01/demoap]
[062110_121919530][][EXCEPTION] [DEBUG] [user.timezone]:[GMT+05:30]
[062110_121919530][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
--------------------------------------------------------------------------------lots of lines ----------------------------------------
[GC 17474K->10837K(24648K), 0.0037890 secs]
[GC 17685K->11057K(24648K), 0.0035530 secs]
[GC 17905K->11271K(24648K), 0.0029030 secs]
[GC 18119K->11488K(24648K), 0.0024650 secs]
[GC 18336K->11702K(24648K), 0.0023940 secs]
[GC 18550K->11919K(24648K), 0.0025010 secs]
[GC 18767K->12133K(24648K), 0.0024460 secs]
[GC 18981K->12344K(24648K), 0.0024020 secs]
[GC 19192K->12575K(24648K), 0.0024790 secs]
[GC 19423K->12781K(24648K), 0.0025650 secs]
[GC 19629K->12991K(24648K), 0.0024010 secs]
[GC 19839K->13212K(24648K), 0.0024430 secs]
[GC 20060K->13427K(24648K), 0.0024160 secs]
[GC 20275K->13641K(24648K), 0.0024440 secs]
[GC 20489K->13857K(24648K), 0.0024410 secs]
[GC 20705K->14073K(24648K), 0.0024570 secs]
[GC 20921K->14284K(24648K), 0.0024340 secs]
[GC 21132K->14504K(24648K), 0.0024580 secs]
[GC 21352K->14719K(24648K), 0.0024620 secs]
[GC 21567K->14935K(24648K), 0.0024600 secs]
[GC 21783K->15151K(24648K), 0.0024360 secs]
[GC 21999K->15365K(24648K), 0.0024180 secs]
[GC 22213K->15004K(24648K), 0.0204220 secs]rgrds
Edited by: new2appsdba on Jun 22, 2010 1:43 AM
Edited by: new2appsdba on Jun 22, 2010 2:12 AM
Edited by: new2appsdba on Jun 22, 2010 5:37 AM

Program was terminated by signal 6 Concurrent Manager encountered an error while running Oracle*Report

Hi,
My concurrent request failed due to
Program was terminated by signal 6
Concurrent Manager encountered an error while running Oracle*Report
stat_low = 6
stat_high = 0
emsg:was terminated by signal 6
Error occurred during initialization of VM
Could not reserve enough space for object heap
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xf7176d3e, pid=17695, tid=4096898752
# JRE version: 6.0_32-b05
# Java VM: Java HotSpot(TM) Server VM (20.7-b02 mixed mode linux-x86 )
# Problematic frame:
# V [libjvm.so+0x5f5d3e] ParallelScavengeHeap::tlab_capacity(Thread*) const+0xe
# An error report file with more information is saved as:
# /oracle/tst3/inst/apps/tst3_ora-web2/logs/appl/conc/log/hs_err_pid17695.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
what could be the reason behind this error.
If any one knows this Please help me..
Thank You

Hi,
Please provide your environment details.
Is this a custom program? was this report working fine? If yes, what changes were made lately?
Thanks &
Best Regards,

Create Data Source Module using OMB

I am not seeing how to create Data Source modules using OMB. I am assuming there is a property of OMBCREATE ORACLE_MODULE that I am overlooking. If anyone can provide assistance, it would be greatly appreciated.
Thanks,
craig

Hi,
Yes, there is a OMBCREATE command for creating Oracle Modules. And as per the Scripting ref Guide ( Page 4-157 owb 9i scripting guide) -
OMBCREATE ORACLE_MODULE 'src_module' SET PROPERTIES (DESCRIPTION, BUSINESS_NAME) VALUES ('this is an Oracle module', 'source module') This will create an Oracle module named "src_module", its description is "this is an Oracle module", and business name is "source module".
HTH
Mahesh

Error while running Deferral for August month in RERX module

Hi Form,
Can any body help me as I am getting error while running Deferral run for August month. Error Description is
"Accrual subobject IS10000000001000057/4BC487BDCA9200E8E1008000AC10025F not found"
We had already taken advance rent for the customer and Deferral is running fine till July month but in August month this error is coming.
Please help me out.
Thanks & Regards,
Shailendra Tyagi

Hi Shailendra,
please check the SAP note 1263230 and the mentioned report Z_REFX_CORRECT_ACEHEADER.
This should help to solve the reported issue.
Regards,
Christian

Error while running a test case in Jcaps 6 JDBC project

I encountered an error while running the testcase for a JDBC BC project in Jcaps 6.
BPCOR-6135:A fault was not handled in the process scope; Fault Name is {http://docs.oasis-open.org/wsbpel/2.0/process/executable}selectionFailure; Fault Data is null. Sending errors for the pending requests in the process scope before terminating the process instance
Caused by: I18N: BPCOR-3023: Selection Failure occurred in BPEL({http://enterprise.netbeans.org/bpel/DBSample/Db}Db
Kindly suggest a solution

It seems to be a very common error. Try checking your map assignments when the source (from) is empty (null). These mappings with null values may produce the error you are facing...
Good luck!

Alert subscription data source module encountered errors while running

Similar Messages

Maybe you are looking for