Alert text truncation
Hi all,
Am showing messages with the Alert control. Am didn't aet any width and height property for the alert box whenever showing messages. In some cases the messages getting truncated in the alert box and a vertical scrollbar shown in the alert box.
How avoid message truncation in Alert control?
Thanks and Regards,
Manikandan.S
Actually i meant wrong... The text getting hidden and we have to scroll the mouse to see the remaining text. Actually Alert control designed for to resize its width and height based on the text length only. If yes means when the text will truncate?
Similar Messages
-
How to capture alert text messages defined in RWB to CCMS
Dear Team,
I have configured for Alerts in RWB to capture Integration and Adapter Engine failure messages.
I am getting a detailed description of alert text in the alert inbox.
Example:Error found in MAPPING.EXCEPTION_DURING_EXECUTE for the MAPPING Category in the Message ID XXXX for the Interface XXXX from the Sender Party XXXX.
Now my requirement is I need to capture the detailed text message in CCMS.
Note: I have added the rule CCMS_GET_MTE_BY_CLASS and specified R/3 system ID (SID) and MTEClass as SXI_RWBAlerts in RZ20.
I am getting only the Number of active alerts for the defined Alert Category and the number of alert rules created in RWB.
Number of active alerts 2
Assigned alert rule: 1 Alert for Application Category error
Assigned alert rule: 2 Alert rasied for all IE/AE failures
What is the method need to be assigned to capture the error text messages from RWB?
Please do the needful.
Regards
B.DheepaHi Dheepa,
unfortunately that's not possible with SAP default. Then you need to build your own CCMS node and get informations from alert tables (you can check report RSALERTDISP to get the involved ABAP tables). I'm not sure if it makes sense because you have only limited text length for CCMS alerts and RWB alerts are mostly longer (with more information). Maybe another possibility is to create an analysis method and add it to your RWB node to start report RSALERTDISP when alert is clicked in SolMan. I cannot provide you detailed information about it because I have no experience yet, it's only to share my ideas...
Regards
Markus -
Message IDs in alert text in Solution manager
Hi Experts,
we are using Solution manger for alerts in SAP PI message monitoring .
is it possible to add PI message ids in alert text via solution manager?
if yes, please give us step by step document/ link.
thanks in advance...
regards,
SrinivasHi,
Did you try adding container variable SXMS_MSG_GUID in alert category definition?
Alert Configuration – Step by Step Guide
Regards,
Muni. -
Hi,
I'm using XI alert mechanism (RWB > Alert Configuration), and in case of err RECEIVER_GENERAL_ERROR i'm able to raise the alert. in this specific case, the raised error is (can be read at RWB>Communication Channel Monitoring ):
JCO.Exception while calling MEASUREM_DOCUM_RFC_SINGLE_001 in remote system (RfcClient[RFC_Receiver]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Measuring point -1 does not exist
my Q is:
How can i collect the above text message and add it to the alert text?
Regards
Uri
Edited by: uri karagila on Oct 15, 2009 1:06 PM
Edited by: uri karagila on Oct 15, 2009 2:45 PMHello
Check the link below for the info you can gather using the Container Variables.
Creating Alert Categories
http://help.sap.com/saphelp_nw70/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
Regards
Mark -
Post Author: RScipione
CA Forum: Performance Management and Dashboards
I'm using Business Objects Enterprise XI Release 2 and am having trouble with some alerts I am creating in a rule in InfoView. According to the documentation I've seen, I should be able to use functions in the title and text of the alert, but I can't get it to recognize the functions. If I put "metric1" (no quotes) in the text, I get the metric value, but if I try "MetricValue(metric1.id, 0)", I get an error when I try to run the rule titled "Fail to run the action" and "Error evaluating action expression. #v1 .ID, 0) Success". The alert is generated, but the text is "MetricValue(#v1.ID, 0)", not the value of the metric.
Can anyone tell me what I might be doing wrong? Is the documentation I read incorrect?
Thanks in advance for any replies,
RichardPost Author: RScipione
CA Forum: Performance Management and Dashboards
I'll reply to my own post so that others might benefit from the response I got from customer support.
It is possible to use functions in alert text, but the function must be preceeded by #f and followed by %. So to get the example from my previous post working, I used:
#f MetricValue(metric1.id, 0) %
The 'f' is case sensitive by the way. -
Hi,
I want to add alert text to my sms from ALM.
What parameter do I need to maintain in Method?
The parameter name I have is SUBJECT_ALERT. What would be the parameter value for alert text.
Any help would be appreciated.
Please help.
Points gauranteed.
--Raguu make use of short and long text in alert category to maintain the text for alerts.
-
How can i change alert text size?
hello everyone
how can i change alert text size?
thanksWhat about using the properties of the alert, there are several settings for the font (also one for the size)
-
Hi Guys,
ANy idea how to read the CCMS alert texts into an ABAP program?
Need to capture the alert texts of a red alert in CCMS and display via a program.
pls help.
Will reward points if useful.
Thanks a lot
LeezaHi,
Check these link,
http://help.sap.com/saphelp_sm32/helpdata/EN/d7/28cbcf6dfd455ca8257bf5939a7c48/content.htm
http://help.sap.com/saphelp_sm32/helpdata/EN/d1/3b17419b24f06fe10000000a1550b0/content.htm
This should help.
Feel free to revert back.
-=-Ragu -
Dear @all;
do you know how I can change the Alert text language for my system log alert messages? In this case the MTE text is EN and the Alert Text is DE... where are these language settings active?
ALERT for CRP icocma11_CRP_00 R3Syslog BasisSystem at 20100406 123847 ( Zeit in UTC )
System: CRP at 20100406 143847 ( Zeit in CET )
YELLOW CCMS alert for monitored object BasisSystem
Alert Text:Lösche Modus 001 nach Fehler 061
System:CRP
Segment:SAP_CCMS_icocma11_CRP_00
MTE:CRPicocma11_CRP_00R3SyslogBasisSystem
Client:100
User:MONITOR
Thx and kind regards
RenéOK very strange... I've deactivated the back ground dispatching and activated it after them. I was logged in in EN and now it works fine...
thx
SAP_CCMS_CENSYS_DISPATCHER DDIC
SAP_CCMS_CENSYS_EVENT_REPEATER DDIC
ALERT for PTO \ TPZSP02_PTO_00 \ R3Syslog \ Security at 20100406 135103 ( Time in UTC )
System: PTO at 20100406 155103 ( Time in CET )
RED CCMS alert for monitored object Security
Alert Text:User DDIC locked due to incorrect logon
System:PTO
Segment:SAP_CCMS_TPZSP02_PTO_00
MTE:PTO\TPZSP02_PTO_00\R3Syslog\Security
Client:100
User:DDIC
Severity: 50 -
Hi,
I want to add alert text to my sms from ALM.
What parameter do I need to maintain in Method?
The parameter name I have is SUBJECT_ALERT. What would be the parameter value for alert text.
Any help would be appreciated.
Please help.
Points gauranteed.
--RaguHello,
Please take a look at function module SALO_SEND_ALERT_TO_ALM (function group SALO) as an example. Pay attention to lines:
set long text
swc_set_table lt_container salrt_dynamic_longtext lt_streamtext.
swc_set_element lt_container salrt_dynamic_texttype 'RAW'.
set short text
CLEAR lt_streamtext.
ls_streamtype = 'CCMS ALERT'.
APPEND ls_streamtype TO lt_streamtext.
I hope this helps in some way.
Regards,
Darryl -
Hi Expert ,
I have to shorten the length of Alert text from 10 lines to 3 lines
So that it can be accomodate in smll SMS form and able to send it on
Production mobile.
How it can be done on solution manager where all the alerts are centrally configured. ?
Thanks in advance
Regards,
KamalHi
Refer http://help.sap.com/saphelp_nw04s/helpdata/en/c4/3a7ea5505211d189550000e829fbbd/content.htm to customize your alerts . Also refer the guide http://help.sap.com/saphelp_nw04s/helpdata/en/28/83493b6b82e908e10000000a11402f/frameset.htm
Check http://help.sap.com/saphelp_nw04s/helpdata/en/c4/3a7eb2505211d189550000e829fbbd/content.htm (the descriptive text for the node) .
Regards,
Nibu Antony
Edited by: Nibu Antony on Jun 15, 2010 7:52 PM -
Alert Text: Something Happened
When I restart or start up my computer I get this warning from
FCP...Alert Text: Something Happened...Any ideas?well if you had entered the title of this post into search you would have your answer already, but as I recall the answer is something like this: go into sys prefs, accounts, startup items, delete something called "alert" or something like that.
-
Post Author: Butters
CA Forum: .NET
Hi All,
I've seen a couple of posts regarding text truncation on a crystal report. However, I'm new to crystal reports and I wasn't the person who created the report so am unsure of the settings, and why my text output is being truncated.
Scenario
We have a number of C# classes that create the necessary Report Document objects, set the file path details, output options etc and call the Export method to create the PDF document. However, the text that exists before the file is created, is truncated in the output.
The report file has a Field on (IFieldObject) that is set to retrieve the necessary text, with "Can Grow" set to true. It renders 20 pages of rtf text but doesn't convert as necessary because the text is truncated and therefore incomplete.
I can see that this is a problem in the C# sharp code, and suspect it is more to do with the report (rpt) file and this specific field.
Any help would be greatly appreciated.
Thanks
ButtersPost Author: Argan
CA Forum: .NET
There have been patches for this that allow a registry key called Forcelargerfonts.
By default, newer versions force the font to be smaller on pdf exports to keep truncation from happening. If you are using an old version (say bundled vs.net 2002, 2003, cr9, etc) then you may not have this. Check the kbase to see if there is a patch for your version of CR. -
XI Alert Text (Modifyinng long text using BADI ALERT_MODIFY_TEXT)
Hello, Has anyone been able to successfully implement the BADI ALERT_MODIFY_TEXT ?
The export parameters of the BADI contains an internal table called CT_LONG_TEXT which I am updating with a simple "hello world" message. However, I cannot see this text inside the long-text field in me Alert Inbox in the RWB.
I am certain that the badi is being invoked (I am inserting an entry to a custom table to ensure that - and also, I have written out the original contents of CT_LONG_TEXT which contains the original long text which I configured in ALRTCATDEF), however, no changes to the CT_LONG_TEXT seems to go through..
Is there anything else I need to do? In my ALRTCATDEF config, I have also tried to use the "Dynamic Text" option but to no avail.
Thanks in advance for your help.Post Author: RScipione
CA Forum: Performance Management and Dashboards
I'll reply to my own post so that others might benefit from the response I got from customer support.
It is possible to use functions in alert text, but the function must be preceeded by #f and followed by %. So to get the example from my previous post working, I used:
#f MetricValue(metric1.id, 0) %
The 'f' is case sensitive by the way. -
Session Timeout Alert text is not getting displayed on web ui.
Hello,
In "Session Timeout Alert" pop up we are facing one issue. The pop up is getting displayed as per the value in rdisp/plugin_auto_logout parameter i.e. 1800. But the text is not getting displayed.
I have implemented the SAP Note 1877120 also. Any inputs to resolve this issue.
Thanks.Hi Sigrid,
When we do pre activities related to OTR, need to save it in standard name space only ? could you guide me pls.
in the below we have Alias and package are standard.
1.) There are 4 texts which needs to be configured via SOTR_EDIT to get the translation according your languages implemented in your CRM.
a.) Start doing it by opening transaction SOTR_EDIT.
b.) Change to the language you would like to use.
c.) As ALIAS enter first CRM_IC_CMP_FRAME/SESSION_PING_TITLE. Click on Create and confirm the following dialogues.
d.) Enter CRM_IC_CMP_FRAME as package and the object type as WAPP.
e.) Finally enter the translation according your language from the english version (length of text: 25):
"Session Timeout Alert !"
f.) Save you changes
Repeat the steps a.) to f.) with the following aliases and options:
Jimmi
Maybe you are looking for
-
After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly. I also get error code 7 (Windows error 1114), saying itunes wasn't installed correctly. Tried removing Itunes and installing again, but get
-
How to configured pricing procedure to sales order type
Dear Sir, Please tale me how to configure / change pricing procedure to sales order type. we have required to change pricing procedure from a to b for particular sales document type. Regards BK GAIKWAD
-
Calculation and posting of discount on Payment and on net amount
Hello, My client would like to configure posting of discount on payment. The discount should be calculated on the net amount and should also adjust the VAT input tax amount. Example: PO: 100 EUR, VAT 10 EUR, Gross amt = 110 EUR, Invoice re
-
Each time I try to click on ANY file folder or desktop icon, windows installer starts and begins re-installation of the 9.5 upgrade! After installing 9.5.1, same problem There was no such problem until I upgraded form the orignal software Adobe Pro
-
The main menu does not show in explorer/PC!!
I have a problem that i hope somebody can solve. When i am publishing my site from iWeb directly to me.com the website is working fine. If i export the website and then preview it in explorer on PC the main menu does not appear for some reason. I wou