Alert the media: software update does not fix hardware flaw of droppd calls
Hard not to be sarcastic...but did anyone actually think that changing the size and number of signal strength bars would change a hardware reception issue?? Signal strength still degrades and calls still dropping with the "death grip".
Apple, PLEASE fix this *&^%$ phone!!!
Hello @2020mh , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues. I would like to help.
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend readding the OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.
Similar Messages
-
The last software update does not work putting page numbers on pages?
With the new update, it does not let me enter page numbers on pages. Please advise?
Oooops!
Thanks for that Jeff. Am running on empty (cerebrally) here in the wee small hours.
Peter -
When i click on general settings, the software update does not seem to come up? It wont let me download any apps.
I Want to download i0s 5
i have ipod touch 3rd genYou need to connect your iPod to iTunes on a computer and update from there.
Before updating, I recommend that you create a backup first, using : http://support.apple.com/kb/ht1766
Please note that iPod 3d generation only goes up to iOS 5.1.1
To update the iPod, use: http://support.apple.com/kb/ht4623
scroll down to the part that's about updating with iTunes.
Good luck
Stijn
Message was edited by: jesterwylde -
How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the first generation ipad.
The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972 -
I can't upgrade my MAC os from 10.7.5 to the latest available .
Usual way of software update does not help.
Keeps saying you have the latest update .To get beyond 10.7.5, you must go to the App Store and purchase an upgrade.
Currently Mavericks is free
Allan -
Apple software updates does not appear to do its automatic checks?
I have itunes installed on two almost identical Windows 7 based PC's and I have noticed that on one PC the Apple Software Updates do not appear to do its job by checking for updates automatically. If I run the software manually it will show if an update is available and allow me to install it but I never seem to get prompted automatically by Apple Software Updates even though its set to check weekly. My other PC does prompt. Both PC's have pretty much exactly the same software installed including firewall. Any reason why this would not appear to be working? Any way of checking if its actually carrying out the checks?
The reason I suggested moving the files to the Desktop is because if none of these files are responsible for the problem, you can then put them back--or at least put back the com.apple.systempreferences.plist file, which would have many things in it besides the setting for Software Update. If it is the cause of the problem it would be a good idea to replace it and redo your settings. But if it is NOT causing a problem you would not want to figure out what all needs to be reset, instead you can put the old one back. The two plists from the ByHosts folders can probably just be trashed, and new ones created when you reset preferences for Software Update, although the scheduler might do something else (I don't have many things on auto schedule so I don't know, the only thing in mine is Software Update settings).
Francine
Francine
Schwieder -
Why Software Updater does not install some updates automatically?
QuestionWhy Software Updater does not install some updates automatically?
AnswerSoftware Updater only installs security-related updates automatically. Non-security-related updates, and service packs installation are required to be initiated manually via the Software updates tab under the Policy Manager Console.
In Policy Manager 12, a checkbox Show non-security-related updates has been introduced under the Policy Manager Console > Software tab. Unchecking the checkbox hides the following update types:
Microsoft security tools
Non-security updates
Service packs
Note: This checkbox is Policy Manager Console-specific setting. If you change the setting in one Policy Manager Console, it would not affect another Policy Manager Console connected to the same Policy Manager Server.amrok90 wrote:
Updater does not detects 5800. I've reinstalled everything as it's stated (as, according to FAQ, sometimes the drivers may get corrupt). Restarted the PC. Nothing happened.
Presumably FOTA not an option for your 5800XM?
Happy to have helped forum with a Support Ratio = 42.5 -
My software update does not work: the icon jams and then times out, although web is online. How to resolve??
Snow Leopard DVD:
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
When you've installed SL it will be 10.6.3. You need to update that to 10.6.8 with the combo installer from http://support.apple.com/kb/DL1399 - that gives you access to the Mac App store.
Lion is only available by phone also - same number and they'll give you a download code to use in the Mac App Store.
If you're going to Mountain Lion you don't need to install Lion first - you can do it straight from Snow Leopard 10.6.8.
Specifications;
Snow Leopard 10.6.x:
Lion 10.7.x;
Mountain Lion 10.8.x:
As for Lion, but also must be one of these groups;
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminium, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
<sorry to repeat, guys, but following links isn't always a given with OPs> -
Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.
From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If extensions aren't causing the problem, see below.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found -
I am trying to install iOs 5.1 on myiPad but when I go to 'General' to 'Settings' the link 'Software update' is not visible. Any advice would be welcome.
This feature is only available on iOS 5 or later. You must still be running iOS 4. Connect your iPad to the computer you usually sync with and run iTunes software update.
-
The apple software updater will not update
the apple software updater will not update the following apps
iTunes
Quicktime player
iCloud
<Re-Titled By Host>There is a tech note on what to do when an install or update fails.
Often due to prior copies and cache of those on your system.
Some you have to uninstall but it will leave behind files and folders that then have to be manually removed.
Clone Windows just in case.
Run chkdsk
Cleanup
Use CCleaner or similar and repair the Registry might help too.
I just did a clean install Windows 10 Preview, and the one app I most feared installing installed and seems to be fine, iTunes 12.01+
http://www.apple.com/support/itunes/install/ -
Bridge update does not fix caching problems.
Dear Adobe,
The 5.0.1.23 update for Bridge CS6 does NOT fix the problem of constantly re-caching layered TIF files.
I originaly reported the problem here on May 16, 2012.
http://forums.adobe.com/thread/1007560
At that time I also submitted a bug report via photoshop.com, and received an e-mail response from Adobe support confirming the problem had been replicated in their lab and promising a fix in the next update.
I've since tracked several other reports of this bug and related cache problems.
I assume that, at best, we will have to wait another 6 months or more for the next update. How can I assure this bug will be addressed?redcrown on guard wrote:
The 5.0.1.23 update for Bridge CS6 does NOT fix the problem of constantly re-caching layered TIF files.
At that time I also submitted a bug report via photoshop.com, and received an e-mail response from Adobe support confirming the problem had been replicated in their lab and promising a fix in the next update.
Thank you for this bit of information. Maybe it means I can stop the deactivations/uninstall/reinstall/reactivate cycle to try yet another solution. And hopefully, this will stop the re-caching problem with other than tif files.
regards
*S* -
ITunes Software Update Does Not Work
In iTunes v 10.5.3.3 I click on Help, Check For Updates. iTunes responds with "A new version of iTunes (10.6) is available. Would you like to download it now?". I click on "Download iTunes".
The "Apple Software Update" Dialog Box appears but iTunes does not appear on the list. The only thing that appears on the list is "DVD or CD Sharing Setup Update." The only way for me to update iTunes is to manually download the iTunes application.
I have uninstalled and reinstalled iTunes. I get the same result. Is the problem the iTunes application or the Apple Software Update application? I am running Windows XP Professional.I repaired Apple Software Update. It is now reporting that I need a "Boot Camp Update". I do not use Boot Camp or have it installed on my system.
Doublechecking ... is your XP running natively on your computer, or is it a virtual installation on a system running Mac OS or Linux, or some other OS?
(Your ASU is behaving like your XP is installed on a BootCamp partition on a Mac system ... but if you aren't running BootCamp, it might be being confused by a virtual XP installation.) -
the iphone cannot be restore at this time because the iphone software update server could not be contacted or temperarily unavailable....
this error has been occred"Activation Server Temporarily Unavailable, contact Customer Care?"
99.9% of the time, the cause of this issue is the fact the phone was jailbroken/hacked to unlock it for use on networks other than the network the phone was originally locked to. Apple maintains a database of officially unlocked iPhones, and when Apple's servers detect phones such as yours, activation stops & you get the message you got.
So, either get a sim card from the carrier your phone was originally locked to, or get it officially unlocked, if you want to activate it. Because it appears that it was not officially unlocked. -
Update to 10.4.4 now software update does not work
Updated using the standalone installer and now Software Update will not launch, although I can run it from the Preference pane. Tried repair permissions. Ran cron scripts. Ran the combo update. Still no luck. Any ideas. Thanks.
Software Update will not launch, although I can run it from the Preference pane.
Confusing because they contradict each other. Where are you trying in the failed instance? From the About this Mac menu item? Please be a bit more specific. If my assumption is correct, then create a new admin user account, log into it, and see if it works there. Report back.
Maybe you are looking for
-
In my application, there is the option of dynamically creating a HTML page by using certain selection criteria which are displyed as dropdowns and checkboxes at the top of the screen, pressing a 'RUN' button populates the report/page and then pressin
-
How to see console output in Sun Java(TM) System Web Server 6.1 SP7?
Dear All, I am having Sun Java(TM) System Web Server 6.1 SP7 installed on Windows 2000 Prof. I have deployed few applications and they were running successfully. From debugging point of view, i like to see the output from System.out.println . Prior t
-
Cost center data distribution through change pointers
HI I need to distribute cost center data through change pointers Can anyone please tell me the steps i need to follow please dont give links, but would be helpful if some1 can tell me step by step and how to do testing, ie which tables i need to chec
-
Different behaviour of a plugin in CS6 and CS5.5
I've noticed a difference in a plugin behaviour in CS6 and CS5.5. The following call generates a PF_Cmd_ARBITRARY_CALLBACK in CS6. The PF_Cmd_ARBITRARY_CALLBACK appears later in a plugin work and doesn't work properly in CS6. Though in CS5.5 there is
-
I'm trying to export a 12 second comp and it's taking an extremely long time. I've tried and cancelled several times now, from both the AE render queue and bringing it into Media Encoder and exporting from there. In both locations, no matter what s