Alert! The page yu are trying to view cannot be shown because an erros in the data trabnsmission was detected. What is causing this error?

when visiting the website www.ontwowheels.nl I get the error:
Alet. The page you are trying to view cannot be shown because an erros in the data transmission was detected. I than have to clear my history before I can see the page once. After a visit I get the Aleret again. What can cause this error? When I use IE there is not such a problem. Also when I use IE TAB all is fine

From the http log: 
 
nsHttpTransaction::ParseHead [count=236] 
nsHttpTransaction::ParseLine [HTTP/1.1 304 Not Modified] 
nsHttpResponseHead::ParseVersion [version=HTTP/1.1 304 Not Modified] 
Have status line [version=11 status=304 statusText=Not Modified] 
nsHttpTransaction::ParseLine [Content-Type: text/html] 
ParseContentType [type=text/html] 
nsHttpTransaction::ParseLine [Content-Length: ] 
invalid content-length! 
nsHttpTransaction::Close [this=4e23aa0 reason=804b001d] 
nsHttpConnectionMgr::ReclaimConnection [conn=d1e980] 
STS dispatch [3b04b20] 
nsHttpConnection::CloseTransaction[this=d1e980 trans=4e23aa0 reason=804b001d] 
nsHttpTransaction::Close [this=4e23aa0 reason=804b001d] 
 
Firefox is receiving malicious content-length 
Reason 804b001d ->> NS_ERROR_CORRUPTED_CONTENT 
A transport level corruption was found in the source document. for example 
a document with a calculated checksum that does not match the Content-MD5 
http header.

Similar Messages

My Computer freezes and the screen turns white. What would cause this?

My mac miniComputer freezes and the screen turns white. What would cause this?

Here is what was in the utilities for my console.
10/22/13 9:41:59.000 AM kernel[0]: CoreStorage: fsck_cs has finished for group "3FD474FF-B711-4557-9B01-67EB19C49BDA" with status 0x00
10/22/13 9:41:59.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE HDD HTS541010A9E662 Media/IOGUIDPartitionScheme/Macintosh HD@2/CoreStoragePhysical/CoreStorageGroup/Macintosh HD
10/22/13 9:41:59.000 AM kernel[0]: BSD root: disk1, major 1, minor 4
10/22/13 9:41:59.000 AM kernel[0]: jnl: unknown-dev: replay_journal: from: 65415680 to: 68414464 (joffset 0x13218000)
10/22/13 9:41:59.000 AM kernel[0]: IOThunderboltSwitch<0xffffff80159d4a00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
10/22/13 9:41:59.000 AM kernel[0]: IOThunderboltSwitch<0xffffff80159d4a00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
10/22/13 9:41:59.000 AM kernel[0]: USBMSC Identifier (non-unique): 10000E000C7F9033 0x59f 0x621 0x0, 2
10/22/13 9:41:59.000 AM kernel[0]: jnl: unknown-dev: journal replay done.
10/22/13 9:41:59.000 AM kernel[0]: Kernel is LP64
10/22/13 9:41:59.000 AM kernel[0]: hfs: Removed 6 orphaned / unlinked files and 475 directories
10/22/13 9:41:59.000 AM kernel[0]: BCM5701Enet: Ethernet address a8:20:66:0d:fc:25
10/22/13 9:41:59.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address 20:c9:d0:97:55:7f
10/22/13 9:41:59.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
10/22/13 9:41:59.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished():
10/22/13 9:42:06.456 AM com.apple.kextd[12]: not watching F3408C38-5457-3475-AD1D-D360F815C3AD -> no volume lock to grant
10/22/13 9:42:06.547 AM fseventsd[59]: event logs in /.fseventsd out of sync with volume. destroying old logs. (86493 21 86554)
10/22/13 9:42:06.584 AM hidd[58]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
10/22/13 9:42:06.586 AM hidd[58]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
10/22/13 9:42:06.590 AM kdc[56]: label: default
10/22/13 9:42:06.590 AM kdc[56]: dbname: od:/Local/Default
10/22/13 9:42:06.590 AM kdc[56]: mkey_file: /var/db/krb5kdc/m-key
10/22/13 9:42:06.590 AM kdc[56]: acl_file: /var/db/krb5kdc/kadmind.acl
10/22/13 9:42:06.598 AM airportd[74]: _processDLILEvent: en1 attached (down)
10/22/13 9:42:06.640 AM coreservicesd[76]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
10/22/13 9:42:06.682 AM mDNSResponder[50]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
10/22/13 9:42:06.000 AM kernel[0]: Previous Shutdown Cause: 3
10/22/13 9:42:06.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
10/22/13 9:42:06.000 AM kernel[0]: IOBluetoothUSBDFU::probe
10/22/13 9:42:06.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x828A FirmwareVersion - 0x0066
10/22/13 9:42:06.000 AM kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- this = 0xffffff80168d6c00 ****
10/22/13 9:42:06.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- controller = 0xffffff80168d6c00
10/22/13 9:42:06.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
10/22/13 9:42:06.000 AM kernel[0]: DSMOS has arrived
10/22/13 9:42:06.000 AM kernel[0]: IOPPF: AppleIntelCPUPowerManagement mode
10/22/13 9:42:06.000 AM kernel[0]: createVirtIf(): ifRole = 1
10/22/13 9:42:06.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
10/22/13 9:42:06.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff801682f000
10/22/13 9:42:06.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
10/22/13 9:42:06.000 AM kernel[0]: Created virtif 0xffffff801682f000 p2p0
10/22/13 9:42:06.000 AM kernel[0]: m_tail has not been written to hardware: m_tail = 0x00000000, hardare tail register = 0x00001d08
10/22/13 9:42:07.714 AM configd[18]: setting hostname to "kathy-winters-mac-mini-3.local"
10/22/13 9:42:07.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
10/22/13 9:42:07.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
10/22/13 9:42:07.717 AM configd[18]: network changed.
10/22/13 9:42:08.210 AM fseventsd[59]: log dir: /.fseventsd getting new uuid: 5C426A11-1379-4AD6-AFD9-DF4963B9C3CB
10/22/13 9:42:08.000 AM kernel[0]: macx_swapon SUCCESS
10/22/13 9:42:09.264 AM mds[49]: (Normal) FMW: FMW 0 0
10/22/13 9:42:09.446 AM com.apple.SecurityServer[15]: Session 100000 created
10/22/13 9:42:10.000 AM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 10-Megabit, Half-duplex, No flow-control, Debug [796d,0101,0de1,0300,0021,0000]
10/22/13 9:42:14.849 AM appleeventsd[64]: main: Starting up
10/22/13 9:42:16.255 AM com.apple.usbmuxd[39]: usbmuxd-323 on Jul 29 2013 at 23:21:29, running 64 bit
10/22/13 9:42:19.119 AM com.apple.SecurityServer[15]: Entering service
10/22/13 9:42:19.177 AM systemkeychain[79]: done file: /var/run/systemkeychaincheck.done
10/22/13 9:42:19.185 AM configd[18]: network changed: DNS*
10/22/13 9:42:19.187 AM mDNSResponder[50]: D2D_IPC: Loaded
10/22/13 9:42:19.187 AM mDNSResponder[50]: D2DInitialize succeeded
10/22/13 9:42:19.223 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 5 seconds
10/22/13 9:42:19.621 AM netbiosd[83]: Unable to start NetBIOS name service:
10/22/13 9:42:20.363 AM kdc[56]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
10/22/13 9:42:20.629 AM apsd[70]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
10/22/13 9:42:20.629 AM apsd[70]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
10/22/13 9:42:20.993 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
10/22/13 9:42:21.081 AM digest-service[105]: label: default
10/22/13 9:42:21.081 AM digest-service[105]: dbname: od:/Local/Default
10/22/13 9:42:21.081 AM digest-service[105]: mkey_file: /var/db/krb5kdc/m-key
10/22/13 9:42:21.081 AM digest-service[105]: acl_file: /var/db/krb5kdc/kadmind.acl
10/22/13 9:42:21.083 AM digest-service[105]: digest-request: uid=0
10/22/13 9:42:21.104 AM corestoraged[99]: 0x7fff720a4180 unlockLVF: LVF=E089D621-8D4E-44B9-82E5-DBFC72F26660, "AES-XTS", status = "Unlocked"
10/22/13 9:42:21.106 AM rpcsvchost[109]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
10/22/13 9:42:21.109 AM digest-service[105]: digest-request: init request
10/22/13 9:42:21.113 AM digest-service[105]: digest-request: init return domain: BUILTIN server: KATHY-WINTERS-MAC-MINI-3
10/22/13 9:42:21.301 AM coreservicesd[76]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
10/22/13 9:42:21.305 AM com.apple.kextcache[113]: /: helper partitions appear up to date.
10/22/13 9:42:21.801 AM awacsd[68]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
10/22/13 9:42:21.804 AM awacsd[68]: InnerStore CopyAllZones: no info in Dynamic Store
10/22/13 9:42:22.008 AM locationd[54]: NOTICE,Location icon should now be in state 0
10/22/13 9:42:22.000 AM kernel[0]: en1: 802.11d country code set to 'US'.
10/22/13 9:42:22.000 AM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
10/22/13 9:42:22.000 AM kernel[0]: MacAuthEvent en1 Auth result for: d8:c7:c8:5b:d5:d0 MAC AUTH succeeded
10/22/13 9:42:22.000 AM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
10/22/13 9:42:22.000 AM kernel[0]: AirPort: Link Up on en1
10/22/13 9:42:22.000 AM kernel[0]: en1: BSSID changed to d8:c7:c8:5b:d5:d0
10/22/13 9:42:22.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
10/22/13 9:42:22.195 AM loginwindow[53]: Login Window Application Started
10/22/13 9:42:22.244 AM WindowServer[114]: Server is starting up
10/22/13 9:42:22.247 AM WindowServer[114]: Session 256 retained (2 references)
10/22/13 9:42:22.247 AM WindowServer[114]: Session 256 released (1 references)
10/22/13 9:42:22.254 AM WindowServer[114]: Session 256 retained (2 references)
10/22/13 9:42:22.705 AM WindowServer[114]: init_page_flip: page flip mode is on
10/22/13 9:42:23.271 AM kdc[56]: KDC started
10/22/13 9:42:23.578 AM configd[18]: network changed: v4(en1+:173.250.178.195) DNS+ Proxy+ SMB
10/22/13 9:42:23.581 AM WindowServer[114]: mux_initialize: Couldn't find any matches
10/22/13 9:42:23.586 AM configd[18]: setting hostname to "d-173-250-178-195.dhcp4.washington.edu"
10/22/13 9:42:23.589 AM UserEventAgent[11]: CFPreferences: user home directory for user mobile at is unavailable. User domains will be volatile.
10/22/13 9:42:23.590 AM UserEventAgent[11]: Captive: en1: Probing 'University of Washington'
10/22/13 9:42:23.599 AM WindowServer[114]: GLCompositor enabled for tile size [256 x 256]
10/22/13 9:42:23.599 AM WindowServer[114]: CGXGLInitMipMap: mip map mode is on
10/22/13 9:42:23.607 AM UserEventAgent[11]: Captive: Online (not captive)
10/22/13 9:42:23.609 AM configd[18]: network changed: v4(en1!:173.250.178.195) DNS Proxy SMB
10/22/13 9:42:23.632 AM WindowServer[114]: WSMachineUsesNewStyleMirroring: true
10/22/13 9:42:23.632 AM WindowServer[114]: MPServiceForDisplayDevice: Invalid device alias (0)
10/22/13 9:42:23.632 AM WindowServer[114]: Display 0x1c80d8d2: GL mask 0x4; bounds (0, 0)[1920 x 1080], 17 modes available
Main, Active, on-line, enabled, boot, Vendor 472, Model 235, S/N 23505592, Unit 2, Rotation 0
UUID 0x00000472000002352350559200000000
10/22/13 9:42:23.633 AM WindowServer[114]: Display 0x003f003c: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffff003f003c
10/22/13 9:42:23.633 AM WindowServer[114]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
10/22/13 9:42:23.637 AM WindowServer[114]: Created shield window 0x5 for display 0x1c80d8d2
10/22/13 9:42:23.637 AM WindowServer[114]: Created shield window 0x6 for display 0x003f003c
10/22/13 9:42:23.637 AM WindowServer[114]: Created shield window 0x7 for display 0x003f003d
10/22/13 9:42:23.638 AM WindowServer[114]: Display 0x1c80d8d2: GL mask 0x4; bounds (0, 0)[1920 x 1080], 17 modes available
Main, Active, on-line, enabled, boot, Vendor 472, Model 235, S/N 23505592, Unit 2, Rotation 0
UUID 0x00000472000002352350559200000000
10/22/13 9:42:23.638 AM WindowServer[114]: Display 0x003f003c: GL mask 0x1; bounds (2944, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
UUID 0xffffffffffffffffffffffff003f003c
10/22/13 9:42:23.638 AM WindowServer[114]: Display 0x003f003d: GL mask 0x2; bounds (2945, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
10/22/13 9:42:23.638 AM WindowServer[114]: CGXPerformInitialDisplayConfiguration
10/22/13 9:42:23.639 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; Vendor 0x472 Model 0x235 S/N 592467346 Dimensions 20.51 x 11.54; online enabled, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
10/22/13 9:42:23.639 AM WindowServer[114]: Display 0x003f003c: MappedDisplay Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
10/22/13 9:42:23.639 AM WindowServer[114]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
10/22/13 9:42:24.078 AM ntpd[100]: proto: precision = 1.000 usec
10/22/13 9:42:24.338 AM WindowServer[114]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x00004193, unit 0, caps QEX|QGL|MIPMAP, vram 1156 MB
10/22/13 9:42:24.338 AM WindowServer[114]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
10/22/13 9:42:24.342 AM loginwindow[53]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
10/22/13 9:42:24.628 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 10 seconds
10/22/13 9:42:24.873 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
10/22/13 9:42:24.882 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
10/22/13 9:42:25.125 AM com.apple.launchd[1]: (com.apple.xprotectupdater[36]) Exited with code: 252
10/22/13 9:42:25.410 AM WindowServer[114]: Created shield window 0x8 for display 0x1c80d8d2
10/22/13 9:42:25.410 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/22/13 9:42:25.427 AM launchctl[126]: com.apple.findmymacmessenger: Already loaded
10/22/13 9:42:25.441 AM com.apple.SecurityServer[15]: Session 100004 created
10/22/13 9:42:25.472 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
10/22/13 9:42:25.542 AM configd[18]: network changed: v4(en0+:128.95.5.135, en1) DNS! Proxy! SMB
10/22/13 9:42:25.548 AM configd[18]: setting hostname to "d-128-95-5-135.dhcp4.washington.edu"
10/22/13 9:42:25.567 AM locationd[134]: NOTICE,Location icon should now be in state 0
10/22/13 9:42:25.573 AM UserEventAgent[127]: cannot find useragent 1102
10/22/13 9:42:25.600 AM loginwindow[53]: Login Window Started Security Agent
10/22/13 9:42:25.667 AM SecurityAgent[136]: This is the first run
10/22/13 9:42:25.667 AM SecurityAgent[136]: MacBuddy was run = 0
10/22/13 9:42:25.676 AM WindowServer[114]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x1c80d8d2 device: 0x103f34110 isBackBuffered: 1 numComp: 3 numDisp: 3
10/22/13 9:42:25.869 AM SecurityAgent[136]: User info context values set for kathywinter
10/22/13 9:42:25.990 AM WindowServer[114]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
10/22/13 9:42:26.013 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/22/13 9:42:26.026 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/22/13 9:42:26.295 AM loginwindow[53]: Login Window - Returned from Security Agent
10/22/13 9:42:26.298 AM loginwindow[53]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
10/22/13 9:42:26.308 AM loginwindow[53]: USER_PROCESS: 53 console
10/22/13 9:42:26.321 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
10/22/13 9:42:26.755 AM com.apple.launchd.peruser.501[148]: (com.apple.gamed) Ignored this key: UserName
10/22/13 9:42:26.755 AM com.apple.launchd.peruser.501[148]: (com.apple.gamed) Ignored this key: GroupName
10/22/13 9:42:26.756 AM com.apple.launchd.peruser.501[148]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
10/22/13 9:42:26.760 AM loginwindow[53]: Connection with distnoted server was invalidated
10/22/13 9:42:26.765 AM distnoted[154]: # distnote server agent absolute time: 42.067362814 civil time: Tue Oct 22 09:42:26 2013 pid: 154 uid: 501 root: no
10/22/13 9:42:27.409 AM UserEventAgent[153]: cannot find fw daemon port 1102
10/22/13 9:42:27.844 AM com.apple.SecurityServer[15]: Session 100005 created
10/22/13 9:42:28.028 AM WindowServer[114]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
10/22/13 9:42:28.048 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
10/22/13 9:42:28.168 AM mds[49]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
10/22/13 9:42:28.169 AM mds[49]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
10/22/13 9:42:31.327 AM timezoned[183]: bootstrap_look_up failed (44e)
10/22/13 9:42:31.336 AM timezoned[183]: bootstrap_look_up failed (44e)
10/22/13 9:42:34.612 AM mds[49]: Unable to talk to lsboxd
10/22/13 9:42:34.674 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 20 seconds
10/22/13 9:42:34.768 AM com.apple.time[153]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
10/22/13 9:42:37.163 AM awacsd[68]: Exiting
10/22/13 9:42:38.863 AM com.apple.launchd.peruser.501[148]: (com.apple.AddressBook.abd) Throttling respawn: Will start in 9 seconds
10/22/13 9:42:42.685 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.685 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.714 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.714 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.733 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.733 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.752 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.752 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.771 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.771 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.789 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.789 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.808 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.808 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.827 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.827 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.845 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.845 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:42.864 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
10/22/13 9:42:42.864 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
10/22/13 9:42:43.000 AM kernel[0]: Sophos Anti-Virus on-access kext activated
10/22/13 9:42:46.750 AM com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[131]) Exit timeout elapsed (20 seconds). Killing
10/22/13 9:42:49.603 AM SystemUIServer[175]: CGSCopyWindowShape: pid (175) passed NULL window
10/22/13 9:42:49.603 AM SystemUIServer[175]: could not update menu bar region, 1000
10/22/13 9:42:49.603 AM SystemUIServer[175]: CGSSetWindowTransformAtPlacement: Singular matrix [0.000 0.000 0.000 0.000]
10/22/13 9:42:49.817 AM coreaudiod[197]: Enabled automatic stack shots because audio IO is inactive
10/22/13 9:42:53.000 AM kernel[0]: jnl: disk2s6: flushing fs disk buffer returned 0x5
10/22/13 9:42:54.715 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 40 seconds

My macbook pro is just over 3 years old now and off and on during this time the screen will just go all black. Lately this blackout is lasting longer and I was wondering what is causing this. I am afraid that this will not come back on in the future.

My MacBook pro is just over 3 years old now and the screen has totally blacked out for a few seconds at a time. It will come back on in a few seconds with the exception this past month it has stayed black for a longer period of time like one minute. It scares me to think that one of these times it won't come back on. I have noticed it happens more often when I am using just the battery power. Does anyone have any idea what causes this? just to mention my battery was not low when this happens.
Message was edited by: jmckl

jmckl,
if your MacBook Pro is a 15-inch Mid 2010 model (“MacBookPro6,2”), then it might be exhibiting the defect that is documented on this Apple Support page. If your black screen is due to this defect, then that page states that Apple will service this problem on this specific model of MacBook Pro gratis, for three years from the date of purchase. However, some commenters here have noted that sometimes the servicing is done gratis without having proof of the date of purchase. If you have an Apple Store near you, you might consider bringing your MacBook Pro there to have them check for the presence of this defect.
It is only the 15-inch Mid 2010 model that has this problem; no other model suffers from it.

What is causing this error message? FlashPlayerPlugin_11_9_900_117.exe-Application Error the exception unknown software exception (0xc0000710) occurred in the a

I keep getting this error message every time I open certain sites such as Facebook, Wayfair, etc. I have uninstalled Flash many times and re-installed it many times but keep getting this message.

I had the same problem.
I went through the troubleshoot and it's not the extensions etc.
The Adobe Flash Player Plugin version 11.9.900.117 seems to be the problem.
Flash still plays fine, just the pop-up happens and not sure why.
If it's annoying you, try installing the older version:
Uninstal this version (v11.9), and re-install the older version (v11.8)
You can find older versions on :
''http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html''
To test this, I installed this version :
''(Released 9/10/2013) Flash Player 11.8.800.168 (156.2 MB)''
It downloads a zip file, which contains 7 files, I ran the file :
''flashplayer11_8r800_168_win.exe''
And now the pop-up does not happen.
==================================================
Note 1: I did this:
:1: uninstall v11.9
:2: open firefox (so I'm opening up firefox without flash)
:3: go to youtube = a popup to install flash appears, click to install
The version it offered was not 11.9, but 11.8 : strange! why not v11.9?
: anyway, if you try to install v11.8 this way, it always fails
==================================================
Note 2:
This problem only happens on my main home desktop and does not happen on my other machines (which all are Firefox Sync-ed, so all running same extensions etc...)
Strange!
==================================================

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

As fast as I delete photos from Camera Roll, the space is eaten up - what is causing this?

My photo is fit to burst so I've been deleting a bunch of pictures which are already backed up elsewhere (and also in the icloud)
However, as I'm going through and deleting hundreds of pictures, I see the freed up space only equivalent to about 200mb then suddenly the free space has gone.
I do NOT have wifi sync set up so what could be causing 'something' to eat up this newly freed up space?

I have indeed found that after deleting lots of different stuff to free up space on the phone, you do need to reboot it, then it detects the newly freed up space correctly - essential for all the new and seemingly much larger iOS 8 updates

I get at the end of php docs, what is causing this

So im my header, index, and other php docs, I notice >>>>> at the end of the docs when I save it. Every tag is closed so I have no idea what could be casuing this. Any idea? What can I do to fix this issue?

Without a link, it's impossible to say for sure. But my guess is that you have errors in your parsed code.
Upload your page to your remote server and run it through the W3C validation tool.
http://validator.w3.org/
Nancy O.

My Centro's touchscreen powers on by it'self at random draining the battery. Anyone know what can cause this. Verizon replaced my first Centro and the replacement does it also.

null
Post relates to: Centro (Verizon)

I just found a solution and I've been working on this problem off and on for a long time. I never use my centro for email or Internet, yet it would spontaneously power down and restart, it might hang up, and it always drained power within a few hours.
On another site, someone asked the question -- was this my first Palm or did I have one previously? Once that question was asked, I was reminded that I'd had previous Palm units, each containing different applications. So, I went to apps (home button then select applications from top left screen then select Delete). From there I was able to scroll down and verify what applications I'd had on my two prior Zires. I deleted functions that didn't come with the Palm Centro (a couple of third-party apps I no longer used, Expense DB, File Info and others). I also followed the solutions posted by others to turn select IR to Cradle, unchecked automatically select SMS messages (phone button - Options - Preferences - Connection - Edit - then select Cradle/Cable). My Centro had Network locked, so I couldn't do anything about that. I also went to VoiceDial from Main Menu - Settings - Choice Lists and unchecked each and every category). Then I performed a soft reset, re-synced and my battery (after 22 hours shows power at 96%. I'm thrilled. I just hope the good news continues. Good luck with your unit.

My MacBook laptop will suddenly instruct me to shutdown. A black transparent message appears and instructs me to shutdown. Then when I reboot, it tells me to send the info to Apple. What is causing this to happen?

MacBook laptop suddenly posts a black transparent message on my screen in several different languages instructing me to shutdown the computer. After rebooting, another message appears instructing me to send the information to Apple. This has begun to happen on a regular basis. What is the issue?

That's a kernel panic. the cause can be a software conflict or a hardware problem, so it's not easy to say without more information what can be done.
Here is the Knowledgebase article which may help you diagnose the problem;
http://support.apple.com/kb/TS3742
If you need further help to understand the article or need clarification on any points, by all means post back here.

IE Error: "The content you are trying to view is not supported in the current Document Mode..."

My Captivate 7 project (HTML5) runs just fine on my computer in IE11. My client tried to run it from IE9 and got the following error:
"The content you are trying to view is not supported in the current Document Mode of Internet Explorer. Change the Document Mode to Internet Explorer 9 Standards and try to view the content again. To change the Document Mode, press F12, Click Document Mode:, and then select Internet Explorer 9 Standards."
My guess is that they're running it over their LAN, and IE is subsequently running in quirks mode.
I've changed the metadata in index_SCORM.html from
<meta http-equiv="x-ua-compatible" content="IE=10">
to
<meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1">
we'll see if that fixes it....

TLCMediaDesign wrote:
I've seen a lot of threads about getting rid of these kind of messages. Those messages are there for a reason most of the time. If you have CSS animations or other HTML5 standards that cannot be rendered in IE9 they won't magically start working becuse you got rid of a message. I use IE9 since that is the minimum standard for the client. I have never seen that message publishing to HTML5 content.
IMO, if your client has IE9 I think that you should develop with IE9 in mind not IE11.
When you say "develop with IE9 in mind not IE11" do you mean use SWF instead of HTML5? I used the standard question types, and a converted PowerPoint presentation. I didn't add anything out of the ordinary.

My iPad2 browser doesn't support web pages I'm trying to view what should I do

My iPad2 browser doesn't support web pages I'm trying to view what should I do?

If they are pages that contain flash, then as flash isn't supported ( http://www.apple.com/hotnews/thoughts-on-flash/ ) your options are limited.
Depending on what sites you are trying to access, you might find that some of them (probably more so if they are news sites) have their own apps in the App Store which might let you get some of the content that you want (and there is the built-in YouTube app). Also there are browsers such as Skyfire which 'work' on some sites - but judging by the reviews not all sites. If you want to play flash games then you are probably out of luck if you want to play on-line though the iSwifter app might work on some of them, but again some flash games have app versions in the store.

I did everything lllaass suggested and removed most of the itunes related components, but when I tried to remove itunes, I got the message, "The feature you are trying to use is on a network resource that is unavailable" so I was not able to uninstall it.

I did everything lllaass suggested and removed most of the itunes related components, but when I tried to remove itunes, I got the message, "The feature you are trying to use is on a network resource that is unavailable" so I was not able to uninstall it.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1)

The mapping: XML_NV you are trying to load cannot be found in the classpath

Hi Experts,
We have a EDI to JDBC scenario wherein the incoming EDI files (ANSI X12) will picked up by XI and sends to Backend system and it was working fine. Today when i check the file folder, the EDI files are not picking up by XI system and when I check the Communication channel the below is the error message. Can anybody let me know how to workaround for this issue?
Error: javax.resource.ResourceException: --- Conversion of synchronous request from module chain ended with errors ---[Error:ID=1010;LEVEL=1] BICMapping runMapping() The mapping: XML_NV you are trying to load cannot be found in the classpath! Maybe you forgot to compile or to activate the mapping! DESCRIPTION: BICMapping Error: The mapping [not specified] you are trying to load cannot be found in the right path! Maybe you forgot to compile or to activate the mapping!
Your help is highly appreciated.
Regards
Faisal

Dear Abdul
If the mapping is there and the PI system is throwing an error that "Mapping not Found" then please try refreshing the cache.
First try Partial and if it does'nt work then go for Full Cache Refresh.
Alternatively if yours is a Java mapping, try relading the code (zip file) and activate the channel.
Sourabh

I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages)

I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

Alert! The page yu are trying to view cannot be shown because an erros in the data trabnsmission was detected. What is causing this error?

Similar Messages

Maybe you are looking for