Alert: Trojan via iChat Do not accept file from Unknown Sources

See this page
http://www.ambrosiasw.com/forums/index.php?showtopic=102379&st=0
3:05 PM Friday; February 17, 2006

See other threads starting up.
http://discussions.apple.com/thread.jspa?messageID=1756003#1756003
8:15 PM Friday; February 17, 2006

Similar Messages

Playbook not accepting FILES from my nokia c7 via bluetooth

I got the playbook recently.
I have nokia C7 phone having JPG files and mp3 files. I wanted to transfer files from nokia phone to playbook.
I have done the following -
1. Bluetooth of the both the devices are ON and they are paired successfully.
2. FILE sharing option on playbook is also ON
3. however, when i send any file via bluetooth to playbook, my C7 says unable to connect.
I dont understand this. All the pairing and file sharing options are set correctly.
Please provide a solution ASAP.
I can also do the internet teethering from my c7 successfully, then why it doesnt transfer files via simple bluetooth. What am i missing?

At the present time there is no bluetooth file sharing on the playbook. Use a pc or Mac to put the files on an then transfer them to the playbook. At least you will have a backup of the files.
Be a Shepard and not an iSheep.

Help Please: External Hard Drive not accepting files from Macbook

My Desktop is a PC.
My laptop is a Macbook.
My External Hard drive is a Belkin High Speed USB 2.0 External Drive Enclosure Kit.
I am new to the Mac.
The Macbook recognises the External Hard Drive when plugged into a USB port. No problem.
I can drag any file from the external hard drive into the mac. No problem.
But I cannot drag any file from the Mac back into the External Hard Drive. (Jpegs, PSD, Doc etc-no file is accepted)
When I drag the file from the Mac to the External Hard Drive I get this message:
"The item “filename“ cannot be moved because “folder(external drive)” cannot be modified.
I did a get-info on the external drive and got this information-
'Format: Windows NT Filesystem
Ownership and Permissions: you can only read'
It defeats the purpose of my working on my laptop if i cannot bring the files back 'home' to the Hard Drive-What can I do to be able to bring files back into the external hard drive? Can someone please advise me?
I look forward to hear from you.
(My email address is [email protected])
Macbook Mac OS X (10.0.x) 13.3" Intel Core Duo 2.0GHz Laptop
Macbook Mac OS X (10.0.x) 13.3" Intel Core Duo 2.0GHz Laptop

if these macbooks are dual core(?) supporting mac and
windows is there not a way for me to work on a
file,save the file in windows and then drag it into
the external hard drive?
i guess not?
Not really.
On a related note and as an alternative, someone posted a way that I didn't think about which may get around having to do all that:
http://discussions.apple.com/thread.jspa?threadID=630540&tstart=45
i guess i'll have to go the partition route. all my
important files are on the external hard drive-who
can i trust to do this and how much can i expect to
pay for it?
I think I would try the above networking route first before playing around with the partition on the external.
I think it should work so long as the external drive on the PC is shared.

Xerox Phaser 4500 : "remote host did not accept file (32)"

Am trying to print to our networked Xerox Phaser 4500DT at work. Set it up as an LPR printer as I did with Tiger (setting it up as IPP gives a permission denied error when you try to print), and printed a test page. Worked fine.
Try to print any sort of useful document, however, and I get a "remote host did not accept file (32)" error, when it's spooled about 20% of the document. Anybody run into this, or have any ideas?
I've tried Leopard's built-in 4500 driver, and the Leopard driver from the Xerox website (which seems to be the same version anyway). I've also tried the trick of putting "lp" in the queue name field, which seems to have been the cause of this error for some people. No joy for me, though.

That seems to be an LPD error message, so you could try setting the printer up as either IPP or JetDirect, if the interface supports either one.

LSMW accept file from logical path?

Dear All,
Can LSMW designs for conversions accept file from logical path?
The requirement is during actual conversion execution -the conversion team can store files anywhere they want, configure logical file names/paths and use our LSMWs without needing program modifications.
Kindly let me know.
Thanks in Advance
Ranjan

Hai KCR
Using Tcode MM01 -- Maintain the source fields are
1) mara-amtnr char(18)
2) mara-mbrsh char(1)
3) mara-mtart char(4)
4) makt-maktx char(40)
5) mara-meins char(3)
the flate file format is like this as follows
MAT991,C,COUP,Srinivas material01,Kg
MAT992,C,COUP,Srinivas material02,Kg
AMT993,C,COUP,Srinivas material03,Kg
MAT994,C,COUP,Srinivas material04,Kg
MAT995,C,COUP,Srinivas material05,Kg
goto Tcode LSMW
give Project Name
     Subproject Name
     object Name
Press Enter -
Press Execute Button
It gives 13 radio-Button Options
do the following 13 steps as follows
1) select radio-Button 1 and execute
   Maintain Object Attributes
select Standard Batch/Direct Input
   give Object -- 0020
       Method -- 0000
   save & Come Back
2) select radio-Button 2 and execute
   Maintain Source Structures
   select the source structure and got to click on create button
   give source structure name & Description
   save & Come Back
3) select radio-Button 3 and execute
   Maintain Source Fields
   select the source structure and click on create button
   give
   first field
        field name    matnr
        Field Label   material Number
        Field Length 18
        Field Type    C
   Second field
        field name    mbrsh
        Field Label   Industrial Sector
        Field Length 1
        Field Type    C
   Third field
        field name    mtart
        Field Label   material type
        Field Length 4
        Field Type    C
   fourth field
        field name    maktx
        Field Label   material description
        Field Length 40
        Field Type    C
   fifth field
        field name    meins
        Field Label   base unit of measurement
        Field Length 3
        Field Type    C
save & come back
4) select radio-Button 4 and execute
   Maintain Structure Relations
   go to blue lines
      select first blue line and click on create relationship button
      select Second blue line and click on create relationship button
      select Third blue line and click on create relationship button
save & come back
5) select radio-Button 5 and execute
   Maintain Field Mapping and Conversion Rules
   Select the Tcode and click on Rule button there you will select constant
   and press continue button
   give Transaction Code : MM01 and press Enter
   after that
   1) select MATNR field click on Source filed(this is the field mapping) select MATNR and press Enter
   2) select MBRSH field click on Source filed(this is the field mapping) select MBRSH and press Enter
   3) select MTART field click on Source filed(this is the field mapping) select MTART and press Enter
   4) select MAKTX field click on Source filed(this is the field mapping) select MAKTX and press Enter
   5) select MEINS field click on Source filed(this is the field mapping) select MEINS and press Enter
finally
save & come back
6) select radio-Button 6 and execute
   Maintain Fixed Values, Translations, User-Defined Routines
   Create FIXED VALUE Name & Description as MM01
   Create Translations Name & Description as MM01
   Create User-Defined Routines Name & Description as MM01
   after that delete all the above three just created in the 6th step
   FIXED VALUE --MM01
   Translations --MM01
   User-Defined Routines --MM01
   come back
7) select radio-Button 7 and execute
   Specify Files
   select On the PC (Frontend) -- and click on Create button(f5)
                                  give the path of the file like "c:\material_data.txt"
                                  description : -
                                  separators as select comma radiao- button
   and press enter   save & come back
8) select radio-Button 8 and execute
   Assign Files
   Save & come back
9) select radio-Button 9 and execute
   Read Files
   Execute
   come back
   come back
10) select radio-Button 10 and execute
    Display Imported Data
    Execute and press enter
    come back
    Come back
11) select radio-Button 11 and execute
    Convert Data
    Execute
    come back
    Come back
12) select radio-Button 12 and execute
    Display Converted Data
    Execute & come back
13) select radio-Button 13 and execute
    Start Direct Input Program
   select the Program
   select continue button
go with via physical file
give the lock mode as 'E'
and execute
Thanks & regards
Sreenivasulu P

I do not accept messages from 17 hours to 23 11/09/12 12/09/12 hours of the year. For the above period I have no messages. Please let that happen. Is it possible to recover lost messages?

Good time.
I do not accept messages from 17 hours to 23 11/09/12 12/09/12 hours of the year.
Go through the iCloud in the mail, I also could not in the period.
I sent a few reports of problems to iCloud.
Now everything is restored. Thank you.
I use several devices: PC Win 7 and iPad OS 5.1.
The problem stalknulsya on both devices.
However, during the above period I have no messages.
Please let that happen. Is it possible to recover lost messages?
Thank you

Hi finecut,
I believe this Mac Mail Help info may help:
Backing up your mail
You can back up your mailboxes to a CD or another disk. To do this, you can either copy the Mail folder in your Library folder or create an mbox file, a common format for storing mail messages.
▪ To save the contents of all your mailboxes, hold down the Option key and drag the Mail folder to your desktop or to another disk. The Mail folder is in the Library folder in your home folder (~/Library/Mail).
Copying the Mail folder only backs up mail from POP accounts, or mail from an IMAP account that you've copied to On My Mac. When you are ready to restore the Mail folder, choose File > Import Mailboxes, select Mail for Mac OS X, and locate the Mail folder.
▪ To create an mbox copy of a mailbox, drag the mailbox from the mailbox list to your desktop.
▪ To create an mbox file with just some of your messages, select the messages, then choose File > Save As. In the Format pop-up menu, choose Raw Message Source, then enter a name and save the file.
You can copy mbox files to CDs or to other disks. When you want to restore your mail, choose File > Import Mailboxes, select "Standard mbox files," and locate the files.
hope that helps,
littleshoulders

Dispatcher yellow,J2EE status info unavailable,Could not get file from DB

Hello Experts,
I have successfully installed a ECC 6.0 server-ABAP +JAVA system (DB2 v9.5 FP4 windows server 2008-x64 bit).
Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17
I upgraded JSPM sucessfully from 14 to 17.Then i was trying to apply JAVA sp's one by one using single sp option JSPM tool.
I DEPLOYED the first sp component sucesfully but after that the next component gave warning in JSPM check that SDM is not started.
I checked MMC.Dispatcher was YELLOW and J2EE status info unavailable. Cannot use JCMON to start SDM..option 20 gives error--cannot access shared memory
I already tried Notes   784568 and 997510
Relevant logs:-
jvm_bootstrap.out
=================================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
Attempt to fully materialize lob data that is too large for the JVM.
Disable data source property "fullyMaterializeLobData" for locator-based lob implementation. ERRORCODE=-4499, SQLSTATE=null ERRORCODE=-4499, SQLSTATE=null
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Unable to synchronize native files for instance [ID140026]!
==============================================================================================
dev_jcontrol
=============================================================================================
Thr 4360] *** ERROR => JsfOpenShm: FtInit(SESSION, 2, 176) failed (got (rc = 0 operation successful), expected (rc = 8 already initialized)) [jsfxxshm.c   913]
[Thr 4360] *** ERROR => Can't create shared memory segment 69 (rc = 1) [jcntrxx.c    1749]
[Thr 4360] *** ERROR => Can't initialize JControl Administration [jcntrxx.c    273]
[Thr 4360] JControlCloseProgram: started (exitcode = -1)
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c   1243]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c   1250]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c   1257]
=================================================================================================
log_bootstrap_ID0140026.0
==========================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
============================================================================================
Eagerly looking forward to a solution from you experts..
Thanks,
Rakesh

Hi,
I am facing the same related problem with ECC 6.0.
My dispatcher started it is showing yellow- dialog queue standstill, J2EE status info unavailable
after some time dispatcher has stopped.
Please check my below trace file for dispatcher:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      03
sid        DEV
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    114
intno      20050900
make:      multithreaded, Unicode, optimized
pid        13108
Fri Nov 27 02:31:55 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 13108) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 114 successfully loaded
     shared lib "dw_xtc.dll" version 114 successfully loaded
     shared lib "dw_stl.dll" version 114 successfully loaded
     shared lib "dw_gui.dll" version 114 successfully loaded
     shared lib "dw_mdm.dll" version 114 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3903
Fri Nov 27 02:31:59 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapdev_DEV_03                           <
DpShMCreate: sizeof(wp_adm)          15800     (1436)
DpShMCreate: sizeof(tm_adm)          4232256     (21056)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1536)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 08290040, size: 4889440)
DpShMCreate: allocated sys_adm at 08290040
DpShMCreate: allocated wp_adm at 08292090
DpShMCreate: allocated tm_adm_list at 08295E48
DpShMCreate: allocated tm_adm at 08295E78
DpShMCreate: allocated wp_ca_adm at 0869F2B8
DpShMCreate: allocated appc_ca_adm at 086A5078
DpShMCreate: allocated comm_adm at 086A6FB8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 08727E78
DpShMCreate: allocated gw_adm at 08727EB8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 08727EE8
DpShMCreate: allocated wall_adm at 08727EF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Nov 27 02:32:00 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 13356
argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2919
argv[5] = -DSAPSYSTEM=03
argv[6] = -DSAPSYSTEMNAME=DEV
argv[7] = -DSAPMYNAME=sapdev_DEV_03
argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c   11753]
DpStartStopMsg: send start message (myname is >sapdev_DEV_03                           <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Nov 27 02:32:01 2009
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 114
Release check o.K.
Fri Nov 27 02:32:05 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2927) [nixxi.cpp    4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=13356)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Nov 27 02:32:40 2009
ERROR => W0 (pid 13364) died [dpxxdisp.c   14441]
ERROR => W1 (pid 13372) died [dpxxdisp.c   14441]
ERROR => W2 (pid 13380) died [dpxxdisp.c   14441]
ERROR => W3 (pid 13388) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 13396) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 13404) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 13412) died [dpxxdisp.c   14441]
ERROR => W7 (pid 13420) died [dpxxdisp.c   14441]
ERROR => W8 (pid 13428) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W9 (pid 13436) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W10 (pid 13444) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:50 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Thu Nov 26 21:02:50 2009
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA    13364 Ended         no      1   0        0
1 DIA    13372 Ended         no      1   0        0
2 DIA    13380 Ended         no      1   0        0
3 DIA    13388 Ended         no      1   0        0
4 UPD    13396 Ended         no      1   0        0
5 ENQ    13404 Ended         no      1   0        0
6 BTC    13412 Ended         no      1   0        0
7 BTC    13420 Ended         no      1   0        0
8 BTC    13428 Ended         no      1   0        0
9 SPO    13436 Ended         no      1   0        0
10 UP2    13444 Ended         no      1   0        0
Dispatcher Queue Statistics               Thu Nov 26 21:02:50 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          12
wake_evt_udp_now     0
wake events           total     8, udp     7 ( 87%), shm     1 ( 12%)
since last update     total     8, udp     7 ( 87%), shm     1 ( 12%)
Dump of tm_adm structure:               Thu Nov 26 21:02:50 2009
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Thu Nov 26 21:02:50 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:55 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapdev_DEV_03                           < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (13340) (SOFT_KILL)
Stop icman
killing process (13348) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:13340 HANDLE:1564)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:56 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:13340 HANDLE:1564)
wait for end of icman
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:57 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:58 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:59 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Please help me to start my SAP MMC.
Thanks

Can not delete files from Adobe reader

can not delete files from adobe reader.

Can you let us know a little more about what you are trying to do? Adobe Reader opens pdf files but does not store them so, there's nothing to delete.

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Will not print files from mobile phone says it **may have** a virus- and deletes the file

My HP photosmart premium with wireless ePrint, will not print files from mobile phone says it **may have** a virus- and deletes the file?!? My Fiance has the same phone, and I used it. It completed the file??? If I text message and E-mail address, my cell phone will come up as and E-mail address... has anyone else had this issue? Is it because I texted the the file? It didn't seem to be and issue on any of the other mobile phones used.... I am out of answers.... I tried to E-mail as well...
Thanks in advance

I have nearly the same problem, the printer discards my print job even when i have entered my email address as authorised senders.
Details from my other post:
I sent 2 emails to the printer:
- one is a 3 lines of text and numbers in a GIF file sent as an attachment
- another is a jpg circuit diagram paste in a word doc sent as an attachment
both are classified as spam and refused to print. i have no email coming back saying it failed (even i have checked "Email Job Status" in ePrint Settings.
So what will this HP printer print?
How can I switch this useless spam filter off?
I have get this filter off! I need this email printing to work reliably, that is a major reason I bought this printer
Any suggestions are welcomed...
HP's slogan on the box:
"Now you can print from virtually anywhere" (but get discarded every single time!)

I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

I updated LR5 to 5.7, its still not importing files from my D750. Any help would be appreciated.

I updated LR5 to 5.7, its still not importing files from my D750. Any help would be appreciated.

Did you try unchecking Sync Photos on the Photos tab of your sync settings and syncing? If this doesn't remove them, try creating an empty folder on your PC, then selecting to sync this folder on the Photos tab and syncing your phone. This should delete the existing photos prior to syncing the empty folder.
Also, you can transfer these photos to your computer if you need to by using an app like PhotoSync.

SMTP not accepting realys from OUTSIDE the local network

I come into the office today to find my SMTP server not accepting realys from the employees that work outide the local network.
we just keep getting "relay access denied" errors
here is postconf -n
running tiger server 10.4.7
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 0
mydomain = memphisdns.com
mydomain_fallback = localhost
myhostname = memphisdns.com
mynetworks = 192.168.0.0/24,127.0.0.0/24,216.37.68.34
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_keyfile =
unknownlocal_recipient_rejectcode = 550
Any ideas?

here is postconf WITH authentication turned on
which didnt work
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 0
mydomain = memphisdns.com
mydomain_fallback = localhost
myhostname = memphisdns.com
mynetworks = 192.168.0.0/24,127.0.0.0/24,216.37.68.34
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdpw_server_securityoptions = login,plain,cram-md5
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_keyfile =
smtpduse_pwserver = yes
unknownlocal_recipient_rejectcode = 550

Could not open file. Unknown file type.

The file would not open in Fireworks due to incorrect image paths. The image paths are corrected in dreamweaver and saved. The file now returns "Could not open file. Unknown file type."
So, then I made the same corrections with a text editor and saved the file. Same error when fireworks tries to open it.
in way over my head!

I've had that happen too. What worked for me was shutting FW down and rebooting my machine.

When i open an mp3 file from a source other than apple, does itunes create it's own file and can I then delete the original mp3?

when I open a music file from a source other than apple, does itunes create it's own file and can I then delete the original mp3?

If you use iTunes' default settings then when you add a file to iTunes it places a copy of the file in the iTunes media folder and it leaves the original in place. The exception is when you drag it to the Automatically Add To iTunes folder.
It does not convert the file. You can delete the original if you wish.

Alert: Trojan via iChat Do not accept file from Unknown Sources

Similar Messages

Maybe you are looking for