Alert using ABAP or FM

Hello,
Is there a FM to create an alert ? I need to create alerts while running a report in real time data. I think I can not use Alert Monitor.
regards,
shan

Hello Shan,
Try using this function module '/SAPAPO/ADV_ALERT_SET'.
Regards,
SIva.

Similar Messages

Using ABAP Proxy

I am researching a way to integrate SAP system with ABAP Proxy. I have sevareal questions.
1. Is it possible to use XI alerting for ABAP
2. Is it possible to use application acknowlendgement with asynch ABAP Proxy.
3. When I generate ABAP class in SPROXY transaction do I need to change it by hand or I can to map this proxy to RFC function or BAPI? Is it possible to generate interface in XI by BAPI or RFC and then generate ABAP Proxy?
What is the advantage of ABAP Proxy? I think it requres more ABAP coding...
I have read some blogs but I haven't got answer

Hi, Sergey.
I can try to answer questions 2 and 3. Regarding 1, unfortunately, I haven't tried yet.
2. Yes, definitely.
If you are programming a client proxy (outbound, that is sending data to XI and then to another system) you can require ack and in case the receiver system is able to produce ack (for instance inbound ABAP or Java Proxy), it will be routed back to the sender system.
If you are programming a server proxy (inbound, that is receiving data from XI), raising an exception inside ABAP code will put the R/3 message in "Application Error". The fact that this ack is routed back to XI and to the sender depends on who sent the original data to your proxy: as far as I know, just BPM is able to require ack.
3. Don't confuse RFC with Proxies. The technology behind is really different. Either you use RFC/BAPI stuff (and in this case from an XI perspective you are using RFC Adapter) or proxies (using XI Adapter).
When you generate with SPROXY you have to:
1. write your own abap code to manage data if that's an INBOUND MESSAGE INTERFACE
2. nothing if it's an OUTBOUND MESSAGE INTERFACE, except find the right point in the system where to invoke it (report, customer exit, module pool or whatever).
Finally, the great advantage of proxies is XI native protocol usage. It doesn't require more ABAP. The ABAP code is the same you would put in a function module. The difference is that with proxies you are in an ABAP Object context, which is not the case of functions.
Hope this is exhaustive for you!
Alex
Message was edited by: Alessandro Guarneri

Alerts in ABAP

Hi all,
is alerts creation ,configuration and triggering the alert possible using ABAP in ECC .If it is possible in this way please mention the approach of these.If not how and where this alert creation is possible.
Thanks a lot in advance ,
Venkat

Hi,
[Alerts in ABAP|http://www.sdn.sap.com/irj/scn/advancedsearch?query=alertsinABAP]
What's wrong with putting your subject in the above search field?
Regards,
Clemens

How to populate columns in IVIEW using ABAP FM ?

Hi All,
I need to populate columns in IVIEW using ABAP FM. I had developed a FM which is working fine in SAP ABAP. Now Functional people has done the configuration for this FM to MSS.
When we go to the IVIEW in MSS, My FM is not getting triggered in the MSS portal, it is not displaying any values in that particular column of IVIEW. I dont know why.
Can anybody help me out? If u need any more details i'll provide that..

Hi,
If you need only two why to fetch three ?
Just doing it by yourself will show you what will happen.
Regards
Yoonas

Creating a long text using ABAP code.. fm SAVE_TEXT

When you create an order via IW31 one of the options is to click on the text button and create a long text. I am basically trying to mimic this action from within my ABAP code.
The text id details are as follows:
Text Name 500000015000046 which is (5000000 + order number)
Language EN
Text ID KOPF Order header text
Text Object AUFK Order text
If i manually create the text within the transaction i am then able to view and update it via function modules READ_TEXT and SAVE_TEXT. But if the text has not already been created READ_TEXT obviously returns nothing as it does not exist and SAVE_TEXT does not seem to created it!
Anyone know how i would go about creating this text using ABAP code?
Hope this make a bit of sense
Thanks in advance
Mart

I have implemented the code as i think it should be. See below, can any see what is wrong. If i add init_text it makes no difference and adding the commit_text just makes it hang
DATA: IT_TEXTS type standard table of TLINE,
 wa_texts like line of it_texts,
 wa_txtheader type THEAD.
wa_txtheader-TDID = 'KOPF'.
wa_txtheader-TDSPRAS = 'EN'.
wa_txtheader-TDNAME = '500000015000056'.
wa_txtheader-TDOBJECT = 'AUFK'.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
 CLIENT = SY-MANDT
 HEADER = wa_txtheader
 INSERT = 'X'
 SAVEMODE_DIRECT = ' '
 OWNER_SPECIFIED = 'X'
LOCAL_CAT = ' '
IMPORTING
FUNCTION =
NEWHEADER =
TABLES
 LINES = IT_TEXTS
EXCEPTIONS
 ID = 1
 LANGUAGE = 2
 NAME = 3
 OBJECT = 4
 OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Using ABAP Webdynpr How to Upload File and download file in SAP R/3

Hi SAP GURUS ,
                         I wanted to save employee profile from ESS to SAP so i am creating ESS Application .
For that I go with BDS Approach and create test program for this I got success while uploading file in my folder
which i have created with the help of class and content repository . but when i Using ABAP Webdynpro , i got error FM "BDS_BUSINESSDOCUMENT_CREATEF" message " error_kpro " .
                       Also I wanted to use KM for storage of Documents and wanted to retrive with help of ABAP Webdynpro .
                       So pls tell me / mailed me the process , approach and if you have examples .
    Thanks in Advance ,
     Vishwassap at gmail

Hi Vishwas,
Check out the thread [Efficient way of saving documents uploaded|Re: Efficient way of saving documents uploaded by users; and check the blog by Raja Thangamani.
Also check the thread [Export Images through Function Modules   |Export Images through Function Modules;.
Hope it helps you.

Use abap report program to print bar code instead of smartforms

Do anyone know how to use abap report program to print bar code?

Hi Celina,
http://searchsap.techtarget.com/tip/1,289483,sid21_gci839063,00.html
I hope this will help, also it depends on the barcode type like ARTNR-code 128...
Regards,
Sudhi

Crystal report using ABAP from SAP ECC6.0 EHP 3.0

Hi Gurus,
Can i create crystal report using ABAP in SAP ECC 6.0 EHP 3 . as i am not able to see this link in SPRO.
IMG > SAP NetWeaver > Application Server > SAP List Viewer > Maintain SAP GUI Specific Settings.
Kindly guide me urgently.

http://help.sap.com/saphelp_slc/helpdata/en/27/c9ee1951fc4fb9ac322ac7e6fa7372/content.htm
If I understood your question correctly.
Have a look in the link above.
It is possible to use Crystal Reports from ALV.
Tammy Powlas also has some good guides on how to do this.
The ABAP however is not covered that much.
Best Regards
Ingrid

How can i update data of DSO and Cube using ABAP??

Hello Experts
I have a requrement in which i need to update/ delete data from DSO and cube based on certain keys using ABAP.
Please let me know how can i modify contets of cube or active table of DSO.
Thanks
Sudeep

Hi
I have requirement such that i need to update certain key figures in DSO after certain time.
for eg. say record with key a is loaded to DSO and currospoding key figure was loaded with value 10
after few days because of certain parameters changing in system i need to modify key figure value.
currently i am doing same using 1 self transformation i.e. by loading same data again in same DSO.
Amount of data is very huge and causing performance issues in system.
now A is not key but i need to modify record for few combinations which apperar multiple times in DSO.
Same DSO data is loaded into Cube regularly.
I may need to update data after gap of few weeks as well.
This design will be used as template and needto keep whole logic generic.
So wring Function module can make it generic.
Thanks
Sudeep

Read Infopackage selection from a table using ABAP

Hello Experts,
I have a flat file consisting of 3 columns which I want to use as selection fields for the Infopackage. Now, is it possible to load this flat file to an ODS or a master data table and then write some ABAP in the Infopackage to read the values of the columns and populate the selection fields.
This is what I want: The columns of the flat file are - Company Code, Doc number, Fiscal Year
Now, I loaded this file into a tables (around 2 million records) and then use ABAP to populate the entire file into the selection tab of the Infopackage.
What would be the best approach for this?
Thanks in advance
Vivek

Hi,
It's possible in theory. Just one thing, too many selections in an InfoPackage may not work (I remember about 1,000 or 10,000, not very sure).
I'd like suggest loading a range rather than so many selections. For example, say you have below documents:
1000
1001
1005
1010
Then just load from 1000 to 1010, and create a start routine in your update rule/transformation. There you can do this:
1. select records from the table where you store flat file, using the same selection (1000 to 1010)
2. For every records in DATA_PACKAGE, using READ TABLE statement to check whether that record exist in the table. If not exist then simply delete it from DATA_PACKAGE
I think that would have much better performance. Let us know if you have further questions.
Regards,
Frank

Error in using ABAP OLE wrong cell value

Dear All..
I'm facing a problem while using ABAP OLE..
the problem is the ABAP OLE writes the wrong value in Excel file
the value is 121.000 but it written in Excel file : 121
the weird thing is .. other value of 9.000.000 written correctly in Excel File .. and also lots of other values..
i've trace the value until it goes to the method of :
CALL METHOD OF h_excel 'Cells' = h_zl
     EXPORTING
       #1 = i_row
       #2 = i_col.
   SET PROPERTY OF h_zl 'Value' = i_value.
   GET PROPERTY OF h_zl 'Font' = h_f.
   IF i_bold = 'X'.
     SET PROPERTY OF h_f 'Bold' = 1.
   ENDIF.
   and the values of variable i_value is still correct which is : 121.000 but after writing in excel it becomes 121
   i believe it will become faulty at the specific amount with format of XXX.000 because if I changed the value to 121.001 it displays correctly in Excel file..
i_value is a pass value from variable ld_val with data type of is --> ld_val(20) type n.
is this are originally bugs from the OLE ? how to solved it ?
please advice ..

yes it is clear, but how excel manage the passed data is unclear.
However, to solve you can try this:
DATA : ld_val(20).
WRITE value1 TO ld_val CURRENCY CURR.
REPLACE ALL OCCURRENCES OF '.' IN ld_val WITH space.
CALL METHOD OF h_excel 'Cells' = h_zl
     EXPORTING
     #1 = i_row
     #2 = i_col.
   SET PROPERTY OF h_zl 'Value' = ld_val.
   GET PROPERTY OF h_zl 'Font' = h_f.
   IF i_bold = 'X'.
     SET PROPERTY OF h_f 'Bold' = 1.
   ENDIF.
Regards,
Angelo.

Getting an error when i am execution a BI query using ABAP.

Hi Expert,
I am getting an error when i am execution a BI query using ABAP. Its Giving me this Error "The Info Provider properties for GHRGPDM12 are not the same as the system default" and in the error analysis it saying as bellow.
Property Data Integrity has been set differently to the system default.
Current setting: 0 for GHRGPDM12
System default: u2019 7 u2018
As I am very new to BI and have very limited knowledge, so I am not able to understand this problem. Can any one help me to resolving this issue. Previously it as working fine, I am getting this error last 2 days.
when i am debugging , I am getting error from
create instance of cl_rsr_request
CREATE OBJECT r_request
EXPORTING
i_genuniid = p_genuniid.
this FM. Its not able to create the object. Can any one please help me out.
Thanks in advance.
Regards
Satrajit

Hi,
I am able to solve this problem
Regards
Satrajit

Unallowed RFC-XML Tag (SOAP_EINVALDOC) - Web Service using ABAP Proxy

Hi there
I am trying to consume a Web Service using ABAP Proxies. I have done the following in the system:
I configured the HTTP and HTTPS Proxy settings.
I created a package with package interfaces SAI_TOOLS and SAPPINT included under the Use Access tab.
I created the proxy classes by using the WSDL provided by the system I'm trying to interface with.
I created my HTTP destination RFC via SM59.
I configured a logical port for the proxy.
I developed the ABAP code for calling the proxy.
In the code the exception CX_AI_SYSTEM_FAULT gets raised with error message "Unallowed RFC-XML Tag (SOAP_EINVALDOC)" when I call the method for passing data to the destination system in the proxy class.
I had a look at SM21 and the following message was written in the log:
"SOAP Runtime: SOAP Runtime exception: 111 occurred in method XP_READ_TAG of class CL_SOAP_XP at position 1
SOAP Runtime: Exception message: Unallowed RFC-XML Tag (SOAP_EINVALDOC)". I also looked at SAP Note 919886 which states that it can be dumps in the system, missing configuration or the path prefix of the RFC destination that is incorrect. I cannot find any ST22 entries. The trace file looks as follows:
SAP System ID: DGH
Client: 009
User: COLESKG
System time: 072910
System date: 20070531
SAP Release: 700
Host: hd307c
Operating system: AIX
DB System: ORACLE
Program: ZUK_IPA00003
Processing State: 0
Location: Client
Transport Binding: http://schemas.xmlsoap.org/soap/http
SOAP Application: urn:sap-com:soap:runtime:application:client
SOAP Runtime Protocol: http://www.sap.com/webas/630/soap
/runtime/protocol
SOAP Protocols: <initial>
Request Message: <initial>
Response Message: <initial>
Fault: <initial>
Registry: <initial>
SOAP Roles: <initial>
Trace Level: 3
Logging Level: 2
Monitoring Level: 0
Security Profile: <initial>
WS Security Protocol: <initial>
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Try to create client application for Proxyclass:
ZES_CO_PROCESS_EMPLOYEE_BATCH LP name: DEFAULT
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Client application created
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Try to initialize client application
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->IF_SOAP_APPLICATION_CS~INIT() Try to initialize application
urn:sap-com:soap:runtime:application:client
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Create new runtime CL_SOAP_RUNTIME_CLIENT
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->REGISTER_APPLICATION() Try to register application
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->REGISTER_APPLICATION() Application registered
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Read type of transport binding from
configuration
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->INTERNAL_CLIENT_INIT() Create new transport binding type
http://schemas.xmlsoap.org/soap/http
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~INIT() Try to initialize
http://schemas.xmlsoap.org/soap/http
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~INIT() http://schemas.xmlsoap
.org/soap/http initialized
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~REQUEST() Try to create request message
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~REQUEST() Request message created
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~RESPONSE() Try to create response message
INFO 07:29:10: SOAP Transport Binding CL_SOAP_TRANSPORT_BINDING_ROOT->IF_SOAP_TRANSPORT_BINDING~RESPONSE() Response message
created
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Try to initialize
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Check transport binding
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT() Create runtime protocol
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Try to initialize SOAP Runtime-intrinsic
Protocol as SENDER with Priority 5
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Try to create trace header/part
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Trace header/part created
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Try to create logging header/part
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->INIT_MODULES() Logging header/part created
INFO 07:29:10: SOAP Runtime Protocol CL_SOAP_RUNTIME_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Protocol initialized
INFO 07:29:10: SOAP Runtime CL_SOAP_RUNTIME_CLIENT->INIT()
Initialized
INFO 07:29:10: SOAP Protocol CL_SOAP_PROTOCOL_FACTORY->CREATE()
Try to create instance for http://www.sap.com/webas/630/soap
/runtime/session/protocol::http://www.sap.com/webas/630/soap
/runtime/session/protocol/srt640_impl
INFO 07:29:10: SOAP Protocol CL_SOAP_PROTOCOL_FACTORY->CREATE()
Instance of CL_SOAP_SESSION_PROTOCOL created for http://www.sap.com/webas/630/soap/runtime/session/protocol::http://www.sap.com/webas/630/soap/runtime/session/protocol/srt640_impl
INFO 07:29:10: SOAP SESSION Protocol CL_SOAP_SESSION_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Try to initialize SOAP Session Protocol
as SENDER with Priority 5
INFO 07:29:10: SOAP SESSION Protocol CL_SOAP_SESSION_PROTOCOL->IF_SOAP_PROTOCOL~INIT() Protocol initialized
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT_GEN->CONFIGURE_FEATURES() Try to configure features
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_CLIENT_BY_DESTINATION() Try to
create ICF Client for DESTINATION = ALSB
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_CLIENT_BY_DESTINATION() ICF
Client created by DESTINATION
INFO 07:29:10: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->IF_SOAP_HTTP_TRANSPORT_BINDING~SET_DESTINATION_URL_PATH() Set
DESTINATION PATH = /SapHRSmartIntegrationWeb/processes/ProcessEmployeeBatch.jpd
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT_GEN->CONFIGURE_FEATURES() Features configured
INFO 07:29:10: SOAP Application CL_SOAP_APPLICATION_CLIENT->IF_SOAP_APPLICATION_CS~INIT() Application urn:sap-com:soap
:runtime:application:client initialized
INFO 07:29:10: SOAP LP Registry CL_SRT_LP_MAINTENANCE->CREATE_CLIENT_APPL() Client application initialized
Trace file opened at 20070531 073030 GMT SAP-REL 700,0,95
Error in module XMLParserGetNextElement:773
Id @(#) $Id: //bas/700_REL/src/krn/rfc/xrfcpars.c#2 $
Unallowed RFC-XML Tag
Error in module XMLConverterReadTag:3061
Id @(#) $Id: //bas/700_REL/src/krn/rfc/xrfccnvrt.c#5 $
Unallowed RFC-XML Tag(24)
Error in module ab_soap:4392
Id @(#) $Id: //bas/700_REL/src/krn/rfc/abxrfccal.c#2 $
failed with return code 1
It then must be something in the config. Has anyone got any idea why this message is encountered?
Kind Regards
Gustav Coleske
Message was edited by:
Gustav Coleske

Hi,
I have the same problem as described.
Can you give me a little more information about the error you have solved in the proxy.
Thanks for help
John

Render error while running interactive forms using ABAP

Hi all,
   I am trying to create an adobe form using ABAP through SFP T-code. While I am trying to execute it, it is generating a Render Error. The error message is as follows:
Exception       SYSTEM_ERROR
Message ID:          FPRUNX                     Message number:           001
Message:
ADS: The render error log file has been written to D:\u(200101)
But in the file, it is showing 'NO ERROR REPORT FOUND'.
I have also tested by FP_PDF_TEST_00 program if the connection with the server is fine. It is showing it is fine. I have tested with JAVA code as well. It is also showing that connection is fine.
I could'nt get the reason for the error. It would be great if anyone can help me in this issue.
Thanks in advance.
gopal

Dear Gopal,
please use the search function. This question has been answered many times here in the forum.
Best regards,
Dezso

How to upload excel file in Webdynpro application using ABAP

Hi Experts,
Am developing a webdynpro application in which it will take an excel file as input and display the contents in the form of a table in output. I am able to upload tab delimited text file and populate the table using the below code but not able to do the same with .xls file. Pls let me know if I need to use a different function module for upload excel file.
get single attribute
wd_context->get_attribute(
    EXPORTING
      name = `DATASOURCE`
    IMPORTING
      value = l_xstring ).
CALL FUNCTION 'HR_KR_XSTRING_TO_STRING'
    EXPORTING
      in_xstring = l_xstring
    IMPORTING
      out_string = l_string.
SPLIT l_string AT cl_abap_char_utilities=>newline INTO TABLE i_data.
Bind With table Element.
LOOP AT i_data INTO l_string.
    SPLIT l_string AT cl_abap_char_utilities=>horizontal_tab INTO TABLE fields.
    READ TABLE fields INTO lv_field INDEX 1.
    fs_table-name = lv_field.
    READ TABLE fields INTO lv_field INDEX 2.
    fs_table-age = lv_field.
    APPEND fs_table TO t_table1.
ENDLOOP.
lo_nd_data = wd_context->get_child_node( 'DATA_TAB' ).
lo_nd_data->bind_table( T_TABLE1 ).
Thanks,
Subathra

Dear Exports
Can anyone guide me how to uplode the .xlsx or ..xls formatted excel file using abap webdynpro without converting it to .txt file. Because my client requirement is only to upload the excel file. because to convert the .xlsx flie to .txt file it will be time taking and cost expanssive. Another requirement is suppose today i have create a application for uploading a file which has 8 columns and 10 rows. suppose tomorrow the client will make some changes in that flat file means the client will add 2 extra columns and 10 more columns in that fil. and will upload that file. Then the new file will be display on the browser or old file. but my requirement is to display the new file in browser.
Can anyone kindly help to solve my problem. I am completely fresher in this field and I need to do it as soon as possible. Please help to solve the problem.
Regards
Rashmita

Alert using ABAP or FM

Similar Messages

Maybe you are looking for