Alert Watch: can not define a MB unit for network inbound

I want to create a alert rule for the cloud service, this rule is defined as the network inbound is less than 100MB within one hour, what makes me confused is that I can not find a MB unit, only byte unit can be used. Can anyone help or repost this issue
to azure team?

Hi,
It's very strange, when I edit the alert rule that build yesterday, it gives me the error as below, however, I edit it with a new value 10000, it works as normal, and I receive the alert email (content: 'Network in GreaterThan 10000 (Count) in the
last 5 minutes' was activated for CloudService: ), please try to create a new alert rule, and give further information here.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.

HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper. I would like to have a custom size to work with a card making program.

Can you help me out?
I have an HP Officejet Pro 8600 N911a
When I try to print to a custom print size (2.75" x 6" in my case), I get the same error everyone else is reporting: "Paper detected does not match paper size or type selected. Make sure the paper size or type is correct to continue the job."
I am currently trying to print using Microsoft Word for Mac 2011 version 14.4.5, but I have the same problem with printing from Adobe Reader 9.8.5 or Preview 8.0.
I am running OS X Yosemite 10.10.
My printer's firmware is "up to date" as of 28-Aug-2014.
This is what I did:
1. Open System Preferences from the Apple menu.
2. Click on the Printers & Scanners icon.
3. Click on the + sign under the list of printers to add a printer
4. Click on IP
5. Enter my IP address in the Address field (verified as "valid and complete host name or address")
6. Ignore Protocol field (default is Line Printer Daemon - LPD)
7. Ignore Queue field (default is blank for default queue)
8. Ignore Name field (default is IP address)
9. Ignore Location field (default is blank)
10. Under the Use dropdown menu, I select "Select Software"
11. HP Deskjet 9800 is not an option.
I searched for 9800, but there is no HP printer with that number in the options.
I tried selecting "HP DeskJet 980C - Gutenprint v5.2.3" to see if that would work, but I received the same error message as above. I tried selecting other random HP printers, but so far I've had no luck.
I've been googling about for a way to manually add a printer driver to this "Select Software" list, but I've found nothing (apparently, no one else wants to do this). I did not find a driver download for the HP DeskJet 9800 for OS X Yosemite 10.10 on the Drivers & Software section of the hp.com website.
Additional details on settings for Microsoft Word for Mac 2011 version 14.4.5:
Selected File > Page Setup from menu
Under the Paper Size drop down menu, I selected manage custom size.
- Click + to add a paper size
- Enter "2.75" in width and "6 in" height in the paper size fields.
- Enter "0 in" as the User Defined Non-Printable Area for top, left, right and bottom.
- Double-clicked Untiled in the custom size list and rename the size as Receipt
- Click OK to return to the Page Setup dialog box
Under Settings: Page Attributes:
- Format for "HP Officejet Pro 8600"
- Paper size: Receipt
- Orientation: "tall/portrait"
- Scale: 100%
- Click OK
Select Format > Document and set all page margins to 0.25"
Thank you.

Can not add new program unit in form

We have a form developed using developer 6i in which we can not add new program units. If new program unit is added and form is saved and closed then after opening the form again, newly added program unit can not be seen in object navigator as well as it can not be found using search. Such form fails to compile as the calls for new program unit exists but the program unit is lost. The problem persists even if another copy of form is made using Save As option.
What could be the reason of this problem?
Thanks

Hmmm... I have never had the problem. Two forms I have been working on lately are 1808 KB and 1424 KB. This is their compiled-and-saved size. Their "cleaned up" size is 792 KB and 604 KB.
<p>Do you know about the semicolon - semicolon replacement trick for reducing fmb size? Read this thread:
<br> Re: FMB size shrinks dramatically
<br>And a related thread:
Re: Why does this happen - find ';', replace with ';'?
<p>I sure wish Forms had a Preferences setting labelled: Remove compiled code when saving.

The tax code entered is not defined in the country for this company code

HI ALL
when we relase billing document to finance i am getting this below error
Diagnosis
    The tax code entered is not defined in the country for this
    company code.
System Response
Procedure
    Check and, if necessary, correct the entry.
Procedure for System Administration
    If it is not an input error, check and possibly change the
    system settings.
    To do this, choose Maintain entries (F5).
    1. Check whether the required tax determination procedure
        is assigned to the relevant country. the Procedure
        field is in the detail screen.
    2. Create a new tax code if required.
Thanks & Regards
Aarman

You can define the tax code for your country using the following menupath in customizing:
IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales and Purchases>Calculation-->Define tax codes ........... in the next screen enter your country and then the tax code you wish to create and press enter. You would be then directed to another screen, where you would maintain the description and whether it is a Input tax or Output tax and then maintain the appropriate tax percentage and save.
Your country should also be assigned to a calculation procedure. You check the same using the same menupath as mentioned above: .............Tax on Sales and purchases>Basic Settings>Assign country to calculation procedure........In the next screen, enter the appropriate tax procedure for your country. Eg: for country DE assign tax procedure as TAXD and save.
Hope this helps.
Regards
SATYA

Role VN not defined in master record for vendor 1000000465

dear alll,
while preparing PO, with one vendor system is giving the below message and
when observed the vendor master data,last view vendor partner roles not updated.
If i go ahead with the same vendor, after giving tax code, taxes tab not getting open to calculate taxes
Despite,condition records are there for the respective condition types with the key combination material,vendor,plant why system is not picking taxes?
Role VN not defined in master record for vendor 1000000465
Message no. ME329
Diagnosis
The vendor may only operate as a partner for other vendors (e.g. as ordering address or invoicing party), not as the vendor who actually fulfills the order.
Procedure
u2022 If this is a warning message, you can ignore it.
u2022 If this is an error message add partner role VN to the vendor master record:
Perform function
some times taxes getting calculated properly but in print priew, tax related informaton(values) missing.
what might be the possible reason? please suggest the way

Message no. ME329
Check these threads
[Re: steps to create PO for service order |Re: steps to create PO for service order]
[How to change the wording of System Messages?|How to change the wording of System Messages?]
thanks
G. Lakshmipathi

How can I define the possible entries for "invoicing process" at fkkinv_ma?

At the transaction code fkkinv_ma, I fill in the fields "Date ID" and "Identification" but I have a problem with the field of "Invoicing Process". When I psh theF4 button, there comes no search help. What should I do? Should I define the possible entries first? If I should, how can I define the possible entries for "invoicing process"? How is the customization done?
Thanks in advance for the answers.

You have to define them in the IMG
Financial Accounting (new)
Contract Account Recievable and Payable
Business Transactions
Invoicing
Invoice Types
You have to set up a number range, decide what type of Financial transactions should not be invoiced -- like Dunning Charges
then you have to have a developer create the form and form class of invoice.

Role VN not defined in master record for vendor

Hi Experts,
I have created new partner role (Z1) coping VN and I am using only that in Vendor master. When I create a PO, it still asks for partner role VN to be defined in vendor master. I have checked in partner schema's and the partner role VN is not mandatory. I want to use only customized role Z1 in PO's. Please let me know why the system throws the message "Role VN not defined in master record for vendor XXXX" ?
Thanks and Regards,
Venkata Prasanna R

if you use partner functions, then VN is a mandatory role, regardless if it is set optional.
There is some coding which only checks on VN partner.
E.g. in message processing like described in OSS Note 457497 - FAQ: Message processing in purchasing:
In Customizing, I have configured the partner role OA (ordering address) for message determination and I have assigned this role to the vendor master. However, why is message determination performed for the corresponding vendor (role VN) and not the ordering address (role OA)?
Answer:
In the purchase order, correct message determination can be processed only with partner role VN (vendor). If you select the "New partner role determination" (NEUPR) checkbox in Customizing of the message determination for purchase orders, the system proposes all partners for message determination and it transfers the role VN (vendor).
*If you do not select this checkbox, only the role OA (ordering address) is used for message determination, but the role is changed to VN (vendor) for program-technical reasons.
It is a restriction of the SAP Basis components that faxes can be sent to vendors only*.

Hello. My trial version of PSP has expired where I can find the serial number to enter if the suscribption form? I'm stuck ans can not purchase the yearly bundle for cloud creative

Hello
I have used the trial version of Dreamweaver and Photoshop; Both have then expired. When I try to purchase an yearly suscribption, during the process, there is step 3 which ask le to enter the serial number, but I do not have access to these number anymore. What should I do?
Thnaks

Hello
Your answer is not fixing the pb I’m facing; Attached a screen shot of the issue I face.. Can you help urgently please? thanks
Le 17 avr. 2015 à 18:57, jomarielawrence <[email protected]> a écrit :
Hello. My trial version of PSP has expired where I can find the serial number to enter if the suscribption form? I'm stuck ans can not purchase the yearly bundle for cloud creative
jomarielawrence <https://forums.adobe.com/people/jomarielawrence?et=watches.email.outcome> marked Sumit Singh <https://forums.adobe.com/people/Sumit+Singh?et=watches.email.outcome>'s reply on Hello. My trial version of PSP has expired where I can find the serial number to enter if the suscribption form? I'm stuck ans can not purchase the yearly bundle for cloud creative <https://forums.adobe.com/thread/1819540?et=watches.email.outcome> as helpful. View the full reply <https://forums.adobe.com/message/7447312?et=watches.email.outcome#7447312>
Marked as helpful:
Hi Jean,
Please refer the solutions given in the following help article.
https://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html <https://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html>
Hope this helps.
Regards,
Sumit Singh
Following Hello. My trial version of PSP has expired where I can find the serial number to enter if the suscribption form? I'm stuck ans can not purchase the yearly bundle for cloud creative <https://forums.adobe.com/thread/1819540?et=watches.email.outcome> in these streams: Inbox

You have not defined CO account assignment for an account that is relevant

Hi All,
While psoting the billing doc to accounting it is giving error as:
You have not defined CO account assignment for an account that is relevant to cost accounting.
Please let us know about error and which team and where we configure that?

Hello ,
one of the G/L accounts for which you have specified in revenue accoutn determination (T code -VKOA) has a setting which requires assignment ot a CO object.
check for the g/accounts detremined, goto FS00 enter the g/l account and the company code
Click on the Edit cost element tab. chcek the entries there, if ther is a entry it means cost assignemtn is reuqired
check with the FICo consultant , if this is really requried and what is the object desired.
based on that , you can have the object , if it si related to sales order then WBS element, internal order etc can be input
Hope This helps
Thanks
akasha

Can we change the organisational unit for a particular position?

Hi Friends,
Can we change the org.unit for a particular position?What is the procedure?
Thank you very much..
Sai

Hi sai,
I m not getting your question, Can u pls elaborate this one.
This thread has been marked as answered, u can start a new thread for the same.
Regards,
Tomesh
Message was edited by:
Tomesh Sahu

In Firefox 4.0 with a Server with a self signed certificate using IPv6 I can not add a "Security Exception" for this certificate.

In Firefox 4.0 I have a server ... it contains a self signed certificate. Using IPv6 I can not add a "Security Exception" for this certificate.
1. I log onto the server (using IPv6). I get the "Untrusted connection page" saying "This connection is Untrusted"
2. I click on "Add Exception.." under the "I understand the Risks" section.
3. The "Add Security Exception" dialog comes up. soon after the dialog comes up I get an additional "Alert" dialog saying
An exception occured during connection to xxxxxxxxx.
Peer's certificate issuer has been marked as not trusted by the User.
(Error code sec_error_untrusted_issuer).
Please note that this works in Firefox 3.6.16 (in IPv4 and IPv6). It also works in Firefox 4.0 in IPv4 only IPv6 has an issue. What's wrong?

Exactly the same problem, except I'm using FF v6 for Windows, not FF v4 as for the lead post. This is for a self-cert which IS trusted, although the error message says it isn't.

TS3694 I forgot my password and could not open until it is said "connect to iTunes". I connected to iTunes. for three hours, I restored it. But it is still not restarted. what can I do? I can not use my iPad 3 for three days. Please help me!

I forgot my password and could not open until it is said "connect to iTunes". I connected to iTunes. for three hours, I restored it. But it is still not restarted. what can I do? I can not use my iPad 3 for three days. Please help me!

Try and force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.

Slave instance can not synchronized with the master for a long time

Hi,
Slave instance can not synchronized with the master for a long time, and the gap of LSNs between slave and master are more and more larger. The transfer bytes per second between master and slave is 118MB/s , upper limit to the ethernet card. Why???
ENVIRONMENT:
1. A network program which we called mcdb is based on BDB 4.8.30. It is used to accept get/set requests and then query data from bdb or save data to bdb.
2. mcdb implements replication with bdb replication manager api. The default start replication policy is DB_REP_ELECTION, rep ack policy is DB_REPMGR_ACKS_ONE_PEER and rep priority is 100.
3. The bdb data files, bdb log files, region files and rep files are all in the same home directory.
4. There are two instances of the mcdb are separately on two standalone servers which has no other programs. These two instances are in one replication group which can elect a master automatically.
5. The master instance is online, which has lots of requests (get, set, delete).
ACTIONS:
1. Start two mcdb instances on two servers and the two instance make a replication group. Slave has already synchronized with the master.
2. Stop the slave for a long time (more than 20 hours).
3. Start the slave instance to synchronize data with master.
RESULT:
1. the gap of LSNs between slave and master are more and more larger.
2. db_stat of master and slave:
master db_stat:
467170     Number of PERM messages not acknowledged
9245     Number of messages queued due to network delay
172415     Number of messages discarded due to queue length
25880     Number of existing connections dropped
3407     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.146 (eid: 0, port: 30011)
Environment configured as a replication master
331726/3574994     Next LSN to be used
0/0     Not waiting for any missed log records
328872/466092     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
2323     Number of duplicate log records received
0     Number of log records currently queued
6768     Maximum number of log records ever queued at once
55284     Total number of log records queued
120M     Number of log records received and appended to the log (120475988)
111     Number of log records missed and requested
2147M     Current master ID (2147483647)
2     Number of times the master has changed
0     Number of messages received with a bad generation number
8505306     Number of messages received and processed
12     Number of messages ignored due to pending recovery
471869     Number of failed message sends
12M     Number of messages sent (12959945)
0     Number of new site messages received
1     Number of environments believed to be in the replication group
990543     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup complete
6244678     Number of transactions applied
0     Number of startsync messages delayed
1     Number of elections held
1     Number of elections won
No election in progress
0.057097     Duration of last election (seconds)
8944103     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
5273M     Number of records added to a bulk buffer (5273592170)
10M     Number of bulk buffers sent (10490865)
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
slave db_stat:
0     Number of PERM messages not acknowledged
0     Number of messages queued due to network delay
0     Number of messages discarded due to queue length
1454     Number of existing connections dropped
0     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.147 (eid: 0, port: 30011)
Environment configured as a replication client
329544/2916048     Next LSN expected
330433/2013808     LSN of first log record we have after missed log records
329543/5500501     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
5256M     Number of duplicate log records received (5256599432)
3925284     Number of log records currently queued
3925285     Maximum number of log records ever queued at once
4880561     Total number of log records queued
3578038     Number of log records received and appended to the log
1912297     Number of log records missed and requested
0     Current master ID
1     Number of times the master has changed
0     Number of messages received with a bad generation number
12M     Number of messages received and processed (12980442)
2     Number of messages ignored due to pending recovery
0     Number of failed message sends
1912307     Number of messages sent
0     Number of new site messages received
0     Number of environments believed to be in the replication group
0     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup incomplete
110568     Number of transactions applied
80     Number of startsync messages delayed
0     Number of elections held
0     Number of elections won
No election in progress
0     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
0     Number of records added to a bulk buffer
0     Number of bulk buffers sent
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
Edited by: 899585 on 2013-1-4 下午10:54
Edited by: 899585 on 2013-1-4 下午10:55

Hi,
Unfortunately, this issue is beyond the level of what is supported over the forum. Performance related issues are extremely complex and require an in-depth understanding of your environment and dedicated support. In a generic sense, you can look at this as a basic queueing problem. You have a server that went down and work is still coming in. When the server gets started it is possible that it may never catch up depending on new work coming in and the rate at processing the old work.
So what would you do in this case --- one thing would be to reduce the new work coming in. In HA terms this would be slowing the master down and you can increase DB_REP_ACK_TIMEOUT for this. Another thing you could do is add fresh servers to help reduce the workload. In HA terms, this would be the equivalent of restarting the client and give it a fresh look at everything. Another thing you could do is replan the system and load balance. In HA terms, it would mean something like take a hot backup of the master and reinit a client from scratch.
If you are interested in getting a dedicated support person working on this concern, please let me know and we can move forward down that path. Just respond to the thread with your email address and I will get in contact with you so we can pursue that approach.
thanks
mike

Error!! Can not find the delivery details for the delivery Id :

hi all,
I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
Error!! Can not find the delivery details for the delivery Id :
hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
I am not sure whats causing the issue and why i am not getting complete bursted files out.
Please suggest
Thanks
Ronny

I guess, you are in 10.1.3.3.2 :),
in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
check th release notes
can you send me the xml and bursting query you have, i can try simulating in my local.

Nternal ERROR: Can not find the ACL containter for object ...

We are using OWB 10.2.0.3. We tried to introduce two basic roles to prevent user A from accessing certain parts of our project. Somehow (I cannot really say how) we ended up in the error message below whenever we want to modify the security properties of an object.
Neither in metalink nor in the oracle forums I could find any hint about that error.
Can anyone help??
Thanks in advance, Maren
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
     at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:166)
     at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2743)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:820)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1449)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:649)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:660)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:623)
     at oracle.wh.ui.common.WhSecurityHelper.securityCheck(WhSecurityHelper.java:112)
     at oracle.wh.ui.console.commands.EditObjectCmd.performAction(EditObjectCmd.java:107)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

Hi Maren
Like you I get this error and do not know what steps caused it.In my scenario I have some mappings that give the error and some that do not - the repository user gets the error but the repository owner does not.
Thinking back over the last number of months (as this project contains 7-8 months od work - we do have exports of the project) I think the ones giving the error are those that perhaps were copied from another to start the coding but I cannot be sure.
I have read the metalink note mentioned above as well as the the queries posted by Oleg and yourself. The queries posted are slightly different, one has a where clause
fco.classname = 'CMPACLContainer' (Maren's)
and the other
fco.classname='CMPMap' (Oleg's).
Was this intentional Maren on your behalf for your problem to be fixed?
We are using 10.2.0.3.33 OWB client and 10.2.0.3.0 OWB repository.
Thanks
Edwin

Alert Watch: can not define a MB unit for network inbound

Similar Messages

Maybe you are looking for