Alert: WebServices connectivity (Internal) transaction failure - The credentials can't be used to test Web Services.

Hi.
Could you please help me to resolve this issue.
I have SCOM 2012 installed to monitor environment with Exchnage 2010 SP3. There are 2 sites with Exchnage servers within the organization. There are 2 mailboxes being created to test both sites.
I am getting following alert:
Alert: WebServices connectivity (Internal) transaction failure - The credentials can't be used to test Web Services.
description: The test mailbox was not initialized. Run new-TestCasConnectivityUser.ps1 to ensure that the test mailbox is created.
Detailed information:
[Microsoft.Exchange.Monitoring.CasHealthUserNotFoundException]: The user wasn't found in Active Directory. UserPrincipalName: extest*****@****.local. Additional error information: [System.Security.SecurityException]:
Logon failure: unknown user name or bad password.
Diagnostic command: "Test-WebServicesConnectivity -MonitoringContext:$true -TrustAnySSLCertificate:$true -LightMode:$true"
EventSourceName: MSExchange Monitoring WebServicesConnectivity Internal
I have tried the next steps:
1. Verified that mailbox is exist and it's not locked (same for the second mailbox)
2. Deleted those mailboxes and created a new using new-TestCasConnectivityUser.ps1 verified that this mailbox is visible on all DC's accross the forest (both mailboxes)
and that temporary password was accepted;
3. Cleared the cache on the SCOM 2012;
4. Still getting the same alert
I will really appriciate any help.
Thanks.

Hi,
Hope these posts help you:
http://thoughtsonopsmgr.blogspot.ca/2013/11/exchange-server-2010-mp-no-synthetic.html
https://social.technet.microsoft.com/Forums/systemcenter/en-US/437f2bbb-cd96-40c3-8c56-6d4d176a9520/exchange-2010-mp-constantly-throws-webservices-connectivity-internal-transaction-failure?forum=operationsmanagermgmtpacks
Natalya
### If my post helped you, please take a moment to Vote as Helpful and\or Mark as an Answer

Similar Messages

What are the system ports that XI uses to invoke web services?

Hi guys,
Anyone knows what are the system ports that XI uses to invoke and to be invoked from web services?
I think it uses the port of AFW but I dont have sure
Thanks in advance,
Ricardo.

hi,
if you want to invoke a WS on the XI use
the j2ee port (5XX00)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Have an airplay enabled AV Receiver - how do i set up Airplay I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the

have an airplay enabled AV Receiver - how do i set up Airplay
I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
Do I need Apple TV or to change some settings somewhere?
Any help would be greatly appreciated

You are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
About AirPlay Mirroring in OS X Mountain Lion:
http://support.apple.com/kb/HT5404
iOS: Recommended settings for Wi-Fi routers and access points:
http://support.apple.com/kb/HT4199
Troubleshooting AirPlay and AirPlay Mirroring:
http://support.apple.com/kb/TS4215
Good luck in setting up 802.11 wirelesss network.

I have a SC-2042-RTD Board and the temperature reading I get are approxiximately 7 degrees high. Every thing is connected as specified in the manual. We are using a 3 wire RTD configuratuion.

I have a SC-2042-RTD Board and the temperature readings I get are approxiximately 7 degrees high. Every thing is connected as specified in the manual. We are using a 3 wire RTD configuratuion. The current excitation is set at 1mA but is actually 1.0035 mA from the board. The Daq card I am using is a DaqCard-A
I16XE-50.

Two quick things to check are: make sure the sensor does not exceed a max resistance of 8.5k ohms and do not leave any current excitation sources unloaded.
Also, check out chapter five of the SC-2042 user manaul (attached) about how to calibrate the device. This may help get rid of the bad readings.
Brian
Attachments:
SC-2042.pdf ‏166 KB

Why my iphone 4 connect to wifi, but when i open safari and search something it say i not connect.. but in the same house my sister using iphone4 too but she can online with the same router

why my iphone 4 connect to wifi, but when i open safari and search something it say i not connect.. but in the same house my sister using iphone4 too but she can online with the same router. i go and check over the detail of the network i connected, over the ip address and subnet mask have the numbers, but over the DNS and router don't have any number...isit the problem???? i can online at any other place but just my home cant...y????

Hey confuddled_chica!
Try the steps in the article below to troubleshoot this issue:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

The connection for a computer hook up can it be used for Sonos?

The connection for a computer hook up can it be used for Sonos?

The computer connection is known as a LAN Ethernet port.
Whether or not Sonos can connect to a LAN Ethernet port is probably a question for Sonos support.

I have a new Ipad and was trying to sync from Itune what is on my Iphone. It keeps saying "Ipad can't be used Apple Moble device service isn't started". ???? help It also said that on my Iphone just now when I was trying to connect to Itunes.

I have a new Ipad and was trying to sync from Itune what is on my Iphone. It keeps saying "Ipad can't be used Apple Moble device service isn't started". ???? help I then tried to connect my phone to Itunes and it is saying the same thing??? Help what is going on?

Right click 'computer' in your PC/laptop (whichever). Click 'Manage', then 'Services and Applications', then 'Services', you should see 'Apple Mobile Device' running or stopped. If you couldn't find 'Apple Mobile Device', it means you haven't download iTunes into your PC/laptop (whichever).
Cheers

An unrecognized HTTP response was received when attempting to crawl this item. Verify whether the item can be accessed using your browser.

I have 2 WFE behing F5 that handles ssl termination too. I have a site abc.xyz.com.
At aam i have
http://abc.xyz.com in default zone and https://abc.xyz.com in internal zone.
AT sharepoint content source; I have both http and https of the above site version.
DNS entry of abc.xyz.com is pointing at VIP in f5 which load balances this site at 2 different ips assigned to each web front end server.
Now when i run search in this content source, searchable item populates but there is error for http request telling An unrecognized HTTP response was received when attempting to crawl this item. Verify whether the item can be accessed using your browser.
Why is this happening?
Is it because requests are coming to f5 as https but search is returning it as http? Will SSL termination removal from f5 solve this issue which i really don't want to do? Will pointing dns entry to two ips in wfe instead of f5 VIP will work?
Adit

Hi,
I have seen a similar post from you, my understanding is that when you ran search in your content source, there was an error. You can take a look at the following thread:
http://social.technet.microsoft.com/Forums/en-US/94e999e3-4128-4674-97dc-e46e71fe0f46/search-service-setup-behind-f5-an-unrecognized-http-response-was-received-when-attempting-to-crawl
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Cannot find the WSDL as I expose a process to web service

Hi,
I have a simple process, and I try to expose it to a web service by using "Process Web Service", and I start the studio web server and test it with "http://localhost:8598/Lesson19-4WebService/webservices/ProcessService?WSDL" but no WSDL appear. Could you help me? Thanks in advance.
Best Regards,
Bill

Please find the following forum.
Process exposed as a web service does not work when deployed
This should resolve the issue.
Hope this helps.
Sarat

(261680070) Q WWO-13 What are the difference between WLS6.1 and WLS7.0 web services?

Q<WWO-13> What are the difference between WLS6.1 and WLS7.0 web services?
A<WWO-13> The differences are huge, so different in fact that 6.1 web services cannot
be deployed in 7.0. WLS7.0 and Workshop have much greater functionality than the
limited stateless session (RPC-style) and JMS destination (MSG-style) approach of
6.1. Workshop web services can interact with any type of EJB, any JMS destination
as well as other web services and directly accessing databases. The framework for
building the web service is better and more adaptable and Workshop provides a fully
integrated develop, deploy, test and debug environment. Additionally, WLS7.0 have
the capacity to be much better at performance since due to XML parser enhancements
and the addition of XML maps.

If you want to take existing WLS6.1 web services and convert them to WLS7.0 you can
do so quite easily. The WLS7.0 Ant still supports wsgen so you do not need to even
change your build.xml file. The generated web service however will be implemented
is a manner compliant with the WLS7.0 environment. More details are at:
http://e-docs.bea.com/wls/docs70/webServices/anttasks.html#1070576
"Adam FitzGerald" <[email protected]> wrote:
>
Q<WWO-13> What are the difference between WLS6.1 and WLS7.0 web services?
A<WWO-13> The differences are huge, so different in fact that 6.1 web services
cannot
be deployed in 7.0. WLS7.0 and Workshop have much greater functionality
than the
limited stateless session (RPC-style) and JMS destination (MSG-style) approach
of
6.1. Workshop web services can interact with any type of EJB, any JMS destination
as well as other web services and directly accessing databases. The framework
for
building the web service is better and more adaptable and Workshop provides
a fully
integrated develop, deploy, test and debug environment. Additionally, WLS7.0
have
the capacity to be much better at performance since due to XML parser enhancements
and the addition of XML maps.

HT201441 what if the user also forgot id apple? how to solve this problem? whether the iPhone can still be used?

what if the user also forgot ps apple? how to solve this problem? whether the iPhone can still be used?

Start here:
https://iforgot.apple.com

Error message: "The media can't be used because you don't have access privileges, or because it has no content or is corrupt."

I get the error message "The media can’t be used because you don’t have access privileges, or because it has no content or is corrupt." when I drag photos (or copy and paste photos) from iPhoto to Pages/Word.
It never used to do this and is really quite annoying, as I now have to find the file through finder to drag from there.
I had to rebuild the iPhoto library a few days ago, is it something to do with this?
Thanks in advance.

Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

I am getting a message - the iphone can not be used because the apple mobile devise service is not started - what does this mean - what do i need to do?

i am getting a message - the iphone can not be used because the apple mobile devise service is not started - what does this mean - what do i need to do?

See Here... http://support.apple.com/kb/TS1567

I just purchased harry potter and the deathly hallows digital copy but i just synced my ipod and its not there. i went back to get the copy again and its sasy the cose can only be used once. I dont have the movie and now i cant get it at all.

I just purchased harry potter and the deathly hallows digital copy but i just synced my ipod and its not there. i went back to get the copy again and its says the code can only be used once. I dont have the movie and now i cant get it at all. i paid for it when i bought the movie but now i dont own it at all. i feel cheated, somebody please help!

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Restore from back-up now "The media can't be used because you don't have access privileges...."

My wife bought a new MBA and restored from back-up. Now when she tries to drag a photo from iPhoto into a Pages document, she get's the error "The media can't be used because you don't have access privileges, or because it has no content or is corrupt". Interestingly, there is no problem dragging the photo into the finder.

What versoin of iPhoto and system are you running - 9.4.3 and 10.8 4? How did you restore from the backup? Are you able to view the photos when you double click on them in iPhoto? If not what do you see?
If I've guessed the versions correctly Apply the following fix to your library:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Options #1 to repair permissions and #4 to rebuild the database.
OT

Alert: WebServices connectivity (Internal) transaction failure - The credentials can't be used to test Web Services.

Similar Messages

Maybe you are looking for