Alerting multiple times

Hi,
I have defined an event alert in Purchasing module (for auto create approve) for the following table, PO_HEADERS_ALL. But I am getting alert mail many times for a single transaction. Any suggestion please?
Thanks in advance.

This would depend on the type of alert. May be u r using update as event.

Similar Messages

Is there any way to have FaceTime ring multiple times when someone wants to talk? Unless I am at my computer I would never I would never know someone wants to talk.

Not sure of the protocol and apologize if I have repeated my question which is "Is there any way to have Facetime ring (alert) multiple times when someone wants to talk? Unless I am at my computer, I would never know someone wants to make contact."

I reposted the question here where I'm getting advice:
http://discussions.apple.com/thread.jspa?threadID=1302031&tstart=0
S.

Same system being shown multiple time in Solution for Early Watch Report

Hi Gurus ,
I have some satellite system configured to Solution Manager . Today I can see the same system entry multiple time in the
Operations: Solution Monitoring -> Early Watch Alert.
eg .,
I have a system whose SID is ABC , i can see the ABC entry for todays date (i.e., 4 FEB 08) nearly 4 time .And this systems are not rescheduled for the next EWR (i.e scheduled for 11 FEB 08- since we have kept a period of 7 days )
Please suggest
Anthony

Hi Anthony,
There was an error, that EWA sessions for one systems were scheduled multiple times per week.
Please check [SAP Note 1083108 - Duplicate EarlyWatch Alerts|http://service.sap.com/sap/support/notes/1083108]
Search for SAP Notes with key words: EWA, multiple, duplicate.
Application area: SV-SMG-OP
What's the software configuration of your SolMan?
Best regards,
Ruediger

I keep getting a server error and my emails are not deleting and showing up multiple times

I am getting emails multiple times and they aren't deleting. They keep coming back. I then get a server errer that mail.me may be a false server pretending to be mail.me. Don't know how to fix this.

Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

ItemEditEnd called multiple times

Hi.
Am using a datagrid and using an item editor and item render for that. Item Renderer --> To give background color and Item Editor - to show a date picker. While implementing this, my need is to open a popup when we enter date. But, am getting the popup thrice , sometimes during "on change" and sometimes, when I press "Enter" or "Tab out" . When analyzed further, I noticed that itemEditEnd event is called thrice. Can anyone let me know the alternative for this please ? Here is my code.
<mx:AdvancedDataGrid width="1000" height="300" horizontalScrollPolicy="auto"
        id="dProvider" creationComplete="init()" verticalScrollPolicy="auto" editable="true" itemEditBeginning="checkIfAllowed(event)" selectionMode="singleCell" itemEditEnd="onEditEnd(event)">
                                private function onEditEnd(event:AdvancedDataGridEvent):void
                                     var oTaskPopupObj:TaskPopUp = new TaskPopUp();
                        PopUpManager.addPopUp(oTaskPopupObj,this,true);
                                                    //This part is called thrice !!!
I have been struggling to get rid of this issue. Would be very happy if I get a help quickly !
Thanks
Bala

Thanks for being patient and answering my questions.
And yes, the itemEditEnd is called multiple times, even for other scenarios. Find below a sample code, where-in, iam using date editor to validate the field entered. Here too, the itemEditEnd is called thrice( you can notice that the alert creeps up thrice). Let me know if you need anything else
Main mxml
[[ [Bindable]
private var compManDataDef:XML =<CompManData>
<row>
<Phase>Program Start</Phase>
<Date>Plan</Date>
<Gate>Enter Date</Gate>
<WBP>TBD</WBP>
</row>
<row>
<Phase></Phase>
<Date>Actual</Date>
<Gate>TBD</Gate>
<WBP>TBD</WBP>
</row>
private function onEditEnd(event:AdvancedDataGridEvent):void
Alert.show("in date validate");
<mx:AdvancedDataGrid width="100%" height="72%" horizontalScrollPolicy="auto" id="
dProvider" creationComplete="init()" dragEnabled="true" lockedColumnCount="5" editable="true" itemEditBeginning="checkIfAllowed(event)" selectionMode="singleCell" itemEditEnd="onEditEnd(event)">
<mx:columns>
<mx:AdvancedDataGridColumn dataField="
Phase"headerText="" width="
137" wordWrap="true" textAlign="center" itemRenderer="renderer.ColorwithLable" editable="false">
</mx:AdvancedDataGridColumn>
<mx:AdvancedDataGridColumn dataField="
Date"headerText="" width="
120" itemRenderer="renderer.ColorwithLable" editable="false"/>
<mx:AdvancedDataGridColumn id="
Gate" dataField="Gate"headerText="
Gate" width="120" editorDataField="newEmployeeType" labelFunction="dglfFormatDate" itemEditor="dateEditing" itemRenderer="renderer.ColorwithLable" />
<mx:AdvancedDataGridColumn id="
WBP" dataField="WBP"headerText="
WBP" width="120" itemRenderer="renderer.ColorwithLable"/>
</mx:AdvancedDataGrid>
editingDate.mxml......
<?xml version="1.0" encoding="utf-8"?><mx:HBox xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="initMe()" >
<mx:Script><![CDATA[
import mx.managers.PopUpManager;
import mx.controls.dataGridClasses.DataGridColumn;
import mx.controls.advancedDataGridClasses.AdvancedDataGridColumn;
import mx.controls.AdvancedDataGrid;
import mx.controls.advancedDataGridClasses.AdvancedDataGridListData;
Bindable]
public var tempVal:String = "";
public var newEmployeeType:String = "";
public var newEmployeeType1:String = "";
private function dateChanged(date:Date):void {
if (date == null)newEmployeeType =
elsenewEmployeeType = (date.getMonth()+1).toString() +
'/' + date.getDate().toString() + '/' + date.getFullYear().toString() ;}
private function initMe():void{tempVal = data.Gate;
if (tempVal != null) {dateField1.text =tempVal.toString();
]]>
</mx:Script><mx:DateField id="dateField1" yearNavigationEnabled="true" change="dateChanged(DateField(event.target).selectedDate)"/></mx:HBox
>

I am trying to print a snapshot taken from a PDF multiple times on one page.

Reader Will not print multiple copies of a snapshot on one page. I read the help files for Acrobat itself and all it said was take the snapshot and print it. Does anyone know if Acrobat can print multiple copies of the snapshot on one page?
From some reading in another forum page it looks like Acrobat can do it by saving the snapshot repeatedly with different names and the printing all of them at once. I really hate that workaround as I need to do this often.
Message was edited by: duckles10

I tried to do it using Reader. I have a one page PDF document with a UPS shipping label on one side and a special box label with a barcode on the other. This is designed to print on a standard 8.5 x 11 sheet of paper. There are many times when I need to be able to print the box labels more than once. At home, I do it by taking a snapshot of the box label and printing it to a Label printer as many times as I need it. The distributor who also ships items for me only has a full page printer but he can print 4 on a page labels on UPS provided stock. Reader won’t print a snapshot multiple times, the option is grayed out. What I wanted to know is if Acrobat itself can print that snapshot multiple times. I don’t think it can without being able to cut and save that PDF multiple times as separate files. That would be a slow and cumbersome operation. If it would take a snapshot or a single cut and save and print that PDF 4 times on a page it would be a reason to spend the money to buy the program because we need to perform this operation OVER and OVER on a regular basis. On some shipments we might need to print 12 or more extra box labels. We tape smaller boxes together for one UPS label and need to make sure EACH box gets a separate label. Otherwise they sometimes get lost on the other end.
Doing the save 4 separate PDFs process we might actually need TWO copies of Acrobat unless reader can print 4 on a page if it has 4 PDF’s to work from. I have not yet found a good way to save those snapshots from reader. I have tried since I found that it was possible to cut and save them in other formats but not PDF’s as reader can’t save them. The quality of the saved items in other formats is not acceptable. I recently discovered that Microsoft publisher which I have can save a document as a PDF. I’m going to see if I can import to that program next.

A music album is listed multiple times in my library but each listing only has a few songs in it-not the full listing. How can I combine them into one album and get rid of other duplicate listings?

Several music albums listed in my IPhone 5 music library are listed multiple times, but each one only has a portion of the songs listed. How can I combine them to make one album?

First....Thank you so much for your prompt reply. I am sorry for not getting back to you regarding your suggestion-I had computer issues that just got resolved. Also, this is my first foray into online chat rooms so I have a lot to learn to precisely state my issue! I did as you suggested and all the songs list the same album when I go into each song's "get info". However, I am not sure how to edit as you suggested. When I downloaded this album originally, for some reason it broke up into several albums each with different songs from the original album. I am trying to consolidate them back into one album in my library. I would greatly appreciate further assistance if you can. Also, I do not use "the cloud" to store any data and would like a good source of info on how to do this. Thanks so much for your patience!
SueZoo

How can I have use the same div ID multiple times on the same page?

Okay so a problem I encounter a lot is that often times I want to use the same div ID several times on the same page. An example of this is when I'm creating table like designs.
Let's say for instance I create a div ID called 'product-container'. I want to use 'product-container' multiple times on the same page but if I do this it is improper XHTML and will throw errors in any XHTML validator (you are only allowed to use a div ID once on any XHTML page in order for it to be standards compliant).
Now the first option is that I could define 'product-container' in my CSS style sheet multiple times by doing something like this...
#product-container {
     width: 300px;
#product-container-2 {
     width: 300px;
#product-container-3 {
     width: 300px;
#product-container-4 {
     width: 300px;
What you will see there however is that it seems pointless to define the same ID numerous times over (just adding a number on the end) when each ID is the exact same thing and has the exact same attributes.
Now what I have noticed is that there are some sites out there who manage to have the same ID appear several times in the code but add a number to it just like above. The difference is that they only have one definition for 'product-cointainer' in their CSS document but in their actual XHTML code they have IDs for 'product-container' but with numbers on the end like 2,3,4,5, etc. It's almost as if JavaScript or some other code is automatically appending a number on the end of the ID so the validator won't consider the markup to be invalid, but yet it knows that it's using the same 'product-container' style that is contained in the CSS style sheet.
I hope I explained this correctly. I'm just hoping to find a way that I can put the same div ID on a page multiple times without having to define it over and over again in my CSS.
Any help is much appreciated!

Because it seems like by using a class you can't make this position as
well as you can by using an ID. Am I wrong?
An ID name can be used only one time per page. A class name can be used multiple times per page.
.product {
width: 300px;
text-align:left;
color: #FF0000
border: 2px solid #666;
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

How to play one clip multiple times at the same time?

I am writing a little game where a certain sound has to be played quite frequently. I load it as a Clip and play it with
myClip.setFramePosition(0);
myClip.loop(0);If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
So here it goes: How can I play a single sound multiple times at the same time? Is that possible?
Edited by: andrasz on Feb 27, 2009 12:37 AM

If the sound has to be played again but is still being played by another event, the setFramePosition() method resets the sound and the first playing instance is cut off.
A workaround would be that each object that needs to play this sound would get its own copy, but that is not feasible due to heavy memory consumption.
So here it goes: How can I play a single sound multiple times at the same time? Is that possible?Ummmm, if you're using a clip, you'll have to maintain one copy per object that needs to play the sound concurrently. You could keep one master copy, and then create copies of the clip as necessary to play them, and then just dump the copies to decrease memory consumption.
A second idea would be to write your own Clip class. Esentially, all you would need to do is dump some sound data onto a TargetDataline to play it. It'll handle the buffering and playing at the correct speed itself. If that's all you did, you should be able to dump multiple times from the same instance and play it multiple times.
Obviously, that's just a theory. In practice, it may not work that way...

A single photo in Aperture smart album shows multiple times on Apple TV2.

Sometimes a random photo in my Aperture smart albums displays on my ATV2 multiple times..can I fix this? For example, currently a single picture shows up on the Apple TV in the photos taken "in the past week" smart album 124 times, and the same picture shows up in the "in the past month" smart album 15 times.
When I double check the picture in the original smart album on the computer, it appears correctly, i.e. only one time.
Suggestions?

I'm having the same problem. I deleted all the photos in the photostream then tried to drag a couple new ones in to see if they'd synch. Nothing is happening. I recently installed aperture (have about 125 gb in the library). If anyone has an idea what to do, i'm open to try something.

Calling stored procedure multiple times in the JDBC receiver

Hi,
I am calling the stored procedure(SP) to update a DB table in the JDBC receiver.
SP has 10 input parameters, and SP can receive one value for each parameter at a time.
In my case, i will have multiple rows to insert using SP.i.e multiple values for each parameter.
Its working correctly for a single value for each parameter, but when i have multiple values i want to call the SP multiples times.
Is this possible and how?
Thanks,
Varghese.

Varghese,
I think you can have multiple statements in the JDBC Adapter's XML, as in http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm.
Here the StatementName1 node can be inserted into your JDBC XML as often as you want.
Kind regards,
Koen

Photoshop is opening multiple times...WHY??? (please help).

When I double click on an image (from Bridge for example) to open in Photoshop it will open up CS6 and then sometimes when I open another image, instead of opening up in the same open Photoshop program, it will open up an additional Photoshop program. Both CS6, Version 13.0.6 x64. Super frustrating when sitting with a client and trying to add an image to a document and it opens up in a different program... Is there a way to see where Photoshop is opening from? Why would CS6 be opening multiple times???
I don't think I noticed this happening before I upgraded to Mavericks (yes, this has been happening for a while). I also have a back-up program called SuperDuper that mirrors my system on a separate hard drive. Could Photoshop be opening from there, too?
Thanks for any possible help!
Deron

Use Lion Recovery to reinstall the Mac OS X.

Hard lock ups multiple times a day - How can I troubleshoot?

My machine locks up hard multiple times a day. If I happen to be sitting in front of it, I observe that the image on the monitors stops changing. Mouse and keyboard will not work at all (including Magic key SysRq sequences). I cannot ping the box from another machine. The system has not made it to 24 hours of uptime for some weeks.
I am beginning to suspect that this may be an issue with the NVIDIA driver, but that's only a guess since it's the only thing I've seen before that can lock up a machine hard like this. I have checked journalctl and the Xorg logs, but don't see anything telling.
What should be my next steps toward solving this issue?

When it locks up, do any indicators on the keyboard blink? That would be an indication of a kernel panic.
If there are no blinking lights, does it unlock eventually?
Has the machine ever been stable?
Have you tried installing a RAM test in your boot loader and running it?
Next, I would start blacklisting any kernel module you don't absolutely need to see if you can isolate it that way.
Also, this looks ominous:
Apr 29 07:49:48 lore kernel: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
I redouble my suggestion you pare down loaded modules to try and isolate this.
Also, I see that it looks at the microcode
Apr 29 07:49:48 lore kernel: microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x11
But I don't see it being updated. That might be normal for your processor, but double check that and ensure you have the microcode update stuff installed in the boot loader correctly.

Jabber for Windows 10.5 shows contacts from Address Book multiple times?

What would cause Jabber for Windows 10.5.1 to show a contact multiple times from the address book when searching? See attached screenshot.

I tried removing firefox and rebooting/reinstalling Jabber with no luck. I reimaged my machine and loaded 10.5.2 fresh install with no previous versions and still getting the random crash. Also, I have users who say it has crashed on them during a WebEx and have had installation problems when upgrading from 9.x to 10.5.x. Version 9 is very solid, sticking with 9.7.5. I have about 10% of my test users having varying problems with version 10.5.x, waiting till the next release. Hopefully Cisco will spend a few more weeks testing the next one before publishing it on their site.
--edit--
Also, when you finally get frustrated and want to downgrade, Jabber 10.5.x doesn't uninstall completely and you end up with an error like the image attached when you try to install v9.7.5 for example and can't install Jabber even after rebooting. I had to run Microsoft Fix It install/Uninstall option and tell it to uninstall Jabber before Windows allowed me to install an older version of Jabber. Not too happy with this release. Strange enough though, some of my users have the exact same laptop I do, same windows build, same patches, etc, and it works fine for them. Anyway, not deploying this one. Good luck.

How to get the values multiple times for the specified element - ABAP IXML.

Hi all,
         i have requirement to get the values for the specified elements multiple times. eg:., if the element is used in the xml 4 times then i need to get all the 4 values. here is the sample xml,
<View mmRelease="6.30" mmVersion="2.0" mmTimestamp="1180099591892" name="Comp_viewtestView" package="sap.com" masterLanguage="en">
<AbstractView.InboundPlugs>
<InboundPlug name="ip2">
<ParameterizedFeature.Parameters>
<Parameter name="ippara2">
<Parameter.Type>
<Core.ForeignReference modelName="DtDictionary" package="com.sap.dictionary" name="binary" type="DtSimpleType"/>
</Parameter.Type>
</Parameter>
</ParameterizedFeature.Parameters>
</InboundPlug>
<InboundPlug name="hi">
<ParameterizedFeature.Parameters>
<Parameter name="hipara">
<Parameter.Type>
<Core.ForeignReference modelName="DtDictionary" package="com.sap.ide.webdynpro.uielementdefinitions" name="Visibility" type="DtSimpleType"/>
</Parameter.Type>
</Parameter>
</ParameterizedFeature.Parameters>
</InboundPlug>
Here i need to store the following values in internal table, the element to get the values are,
(1) InboungPlug name and the respective values of "Parameter name" and "Parameter type" name value.
The output will be of 2 records & values should be
Inbound plug name = ip2
Parameter name    = ippara2
Parameter type      = binary
2nd record
Inbound plug name = hi
Parameter name    = hipara
Parameter type      = Visibility
These 2 records should be in internal table and then i will be passing to database table...
Can anyone provide me the code for the above......
Thanks in advance,
Vishnu.

I didn't get ur requirement..
As per my understanding, upload the XML file into an internal table and then loop over the internal table and get the values for ptype and pname..
XML ABAP - may b helpfull
Edited by: Veeranji Reddy on May 7, 2009 2:10 PM

Alerting multiple times

Similar Messages

Maybe you are looking for