Alerts are being trigerred for only a few interfaces

Hi,
We have created a new alert category and added the container objects SXMS_MSG_GUID and SXMS_FROM_SENDER.And in the ALERT_RULE we have specified to raise alerts for all i.e, we have specified * for sender,receiver etc..,
     When i go into Alert inbox and see there are a few alerts being generated.Which shows that there is no error with the alert category.But these alerts do not belong to my interface(where it is a mapping error in for my interface SXMB_MONI).Than in alert rule again i have changed the sender service to my service than in moni i can see that the mapping failed but there is no alert trigerred for the same.
   But when i don't specify the sender service in alert category it shows the various alerts.
Please let me know what we have done wrong.
Thanks,
Bhargav

Hi,
Its not a best practice to define one Alert rule for all the interfaces....U can create one Alert category and using that u can define different rules for each interface....
Iam not saying what u have done is worng...but its not a good practice...how ur client is permiting u to do one rule  for all the intrefaces....and while creating the Alert category better u deinfe all the container which are helpful to know what is the error is.
SXMS_MSG_GUID
SXMS_RULE_NAME
SXMS_ERROR_CAT
SXMS_ERROR_CODE
SXMS_FROM_PARTY
SXMS_FROM_SERVICE
SXMS_FROM_NAMESPACE
SXMS_FROM_INTERFACE
SXMS_TO_PARTY
SXMS_TO_SERVICE
SXMS_TO_NAMESPACE
SXMS_TO_INTERFACE
these are some containers...
i have some docs how to create the alert category...let me know if u need i will forwad them ....
Regards,
Phani

Similar Messages

  • Images burn into the screen after being there for only a few minutes?

    What's wrong with my mac if images burn into the screen after being there for only a few minutes?
    I can have an icon, like a folder or something, on my desktop for only a few minutes and then when I move it an image of it will be burned into the screen for another few minutes. Same thing happens with having a webpage open for a few minutes or word document. What part of my computer is malfunctioning and is Apple responsible for repairing it?

    Hi,
    Does it happen on all desktops applications as well as Modern UI Apps? Since this issue only happened recently, I suspect a newly-installed third party program causes this issue, please check these programs if possible.
    We can also boot into clean boot mode, test the issue.
    http://support.microsoft.com/KB/929135
    Run a virus scan to eliminate some malware\virus
    Similiar issue
    https://social.technet.microsoft.com/Forums/en-US/125204a0-937e-4bc6-bb60-8fe3244b4514/all-windowsapplications-keep-minimizing-on-their-own-windows-81?forum=w8itprogeneral 
    Yolanda Zhu
    TechNet Community Support

  • Hi I have adobe CC for teams, a team member is having problems opening indesign we are being asked for a serial number, ive checked on our admin account and he is one our our registered 'members'. I wasnt the person who set this up originally so I'm a bit

    Hi I have adobe CC for teams, a team member is having problems opening indesign we are being asked for a serial number, ive checked on our admin account and he is one our our registered 'members'. I wasn't the person who set this up originally so I'm a bit lost, i cant seem to find any serial numbers on the my account section and it seems we have no registered products? can you help?

    Hi There,
    We have checked the details of your team, all seat are assigned properly.
    Now there are few details that we would need in a Private Message so that I can assist you appropriately.
    Name of the user:
    Email of the user:
    Meanwhile, try the below mentioned links.
    Creative Cloud applications ask for serial number
    Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
    [Note: Details that we need is critical, make sure you send them in via Private Message only.]
    Thanks,
    Atul Saini

  • Started downloading CD's to iPod classic. Plenty of spacr left, but Ipod stopped syncing with my music/play list. Sync notification appears for only a few seconds then stops. Sync scroll bar on music/play list never scrolls. Any suggestions?

    Started downloading CD library to iPod. Plenty of space remaining, but it quit syncing with my music/play list. Sync notification appears for only a few seconds then stops. Sync scroll bar on music/play list never starts scrolling. Any suggestions?

    Which version of iTunes and which iPod Classic model are you using?
    Have you tried to Reset the iPod and download again?

  • When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it

    When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it.
    I have been playing whole movies before from VLC without problems.
    Any Ideas?

    Welcome to the Apple Community.
    Yes it's network issues or settings that cause these types of problems most of the time.
    The following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

  • Ipod recognized by computer for only a few seconds?!

    My ipod froze up while it was plugged into the computer. I unplugged it and reset it, but now it keeps showing a folder or a battery w/ an exclamation mark when i plug it into the AC adapter. When I plug it into the computer, it'll show the same icons, but then will be recognized by the computer for only a few seconds flashing the "do not disconnect" screen. Is there any way I can fix my ipod? I've tried to update the software on it, but that doesn't work since the computer only recognizes the ipod for only a few seconds. Any help is much appreciated. Thanks!

    Try the instructions in this article; if disk use isn't enabled for the iPod, it will disappear from the computer after the synchronization process is complete.
    (20795)

  • After installing ios 5.1 on my iphone 4s, some apps are being closed automatically after a few seconds. I've tried a restart and a total reset. nothing seems to work. Any solutions?

    After installing ios 5.1 on my iphone 4s, some apps are being closed automatically after a few seconds. I've tried a restart and a total reset. nothing seems to work. Any solutions?

    The problem Apps may need to be updated. Or maybe your iTunes account needs to just update itself on your iPhone. To do this, install a free App from the App Store on your iPhone. Tap App Store app on iPhone, select and install a free App. When that is done try the problem Apps to see if they work OK again.

  • TS1389 I have tried all of the suggestions and still keeps asking me to authorize my computer for only a few songs that I have purchased.... HELP???!!!

    I have tried all of the suggestions and still keeps asking me to authorize my computer for only a few songs that I have purchased.... HELP???!!!

    Delete and redownload them if doing so is free in your country.
    (69918)

  • Sales doc items with the status CLSD ARE being selected for month-end

    We are working to improve month-end processing time for Sales Orders  We use SAPKKA12 to set CLSD status on line items
    SAP Help states: be sure that the status CLSD (closed) is set for all sales document items that you do not want to include in the period-end closing process. The sales document items with the status CLSD are then not selected for processing in the period-end closing process. Use report program SAPKKA12 to set the status.
    This use to work (in 4.0). I have been on other projects and just brought back to this after several years (now in 5.0).  Testing today shows that orders with CLSD status are being selected for month-end process.
    Any ideas why this is so?  System is selceting over 300,000 orders when well over half of them are set to CLSD.  I do get a message that the order is not relevant to processing, but selecting the order and logging the message take time. and the logs are VERY long.
    thanks

    Does any one else have this issue  that Sales documents with status CLSD are selected by RA (KKAK)?
    In just one of our jobs, i get this Basic List
    Perform actual results analysis      31273      
    Not relevant                                                 103894
    Error                                                        2306      
    Objects Selected                                    137,473
    75% of the orders are CLSD.  and the system is still counting them. (we do not out put information messages)
    I do understand that the orders are not analyzed,  but all documentaion states that CLSD status is not selected, and in our 5.0 system, they are selected.  In our 4.0 system, they were not selected.
    Does this truely work for anyone in a 5.0 system?
    Thanks
    Althea

  • Alerts are not working for Site collections in a content database

    Hi,
    We have been into a strange issue that alerts are not working for site collections from a particular content database. When user subscribed for the alerts, they are getting mail about their subscription but not after that for any new items/documents added
    or changes happen in the list/document library.
    We have tried with Immediate as well as scheduled alerts both are not working.
    FYI, Alerts for all other site collections from different content database for the same web application are working without any issues.
    Any help would be appreciated.
    Thanks
    Ramkumar

    Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
    job-immediate-alerts
    job-daily-alerts
    job-weekly-alerts
    Please check this wiki -
    Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

  • Master - some records : Detail - for only a few i(not all)records in master

    Hi
    I have a requirement like master and detail. However I do not wish to see the details of everything that is there in the master but only a few records (based on some criteria). Example:
    Id Desc Col3 Col4
    1 1 desc 1col3 1col4
    2 2 desc 2col3 2col4
    3 3 desc 3col3 3col4
    id col5 col6 col7
    3 abc def ghi
    4 4 desc 4col3 4col4
    How can I have such a layout in which detail shows details of only selected records present in the master?
    Any help appreciated big time.
    Thx!

    1. create two queries. master and detail and link on the fields of interest.
    2. on the layout, have repeating frames. one for the master and inside the master frame, a repeating frame for the detail.
    hope this is what you are looking for..

  • Watch TV shows on a TV as they are being broadcast for the first time.

    Please explain to me how I can access regular TV channels to watch TV shows as they are broadcast. For example, we tried to watch "Poldark" on PBS, couldn't get it. I finally had to buy it from iTunes and it wasn't cheap. Does all TV have to be paid for these days? (we just got our first flat screen HD TV). And what about shows that are time sensitive, like the news or say ordinary shows channels like "Animal Planet" or HGTV. How do you access shows on these channels?We can't find the channel lineup that I've seen when watching TV with friends. How do you access that on Xfinity. I really wish had gone with AT&T - I need some user friendliness here.

    Do you have a Comcast TV subscription and a Comcast supplied cable box or DVR connected to your TV?  That is what you use to watch live TV.  It would be no different with U-Verse.  You can also connect an antenna to the TV to pick up the local network stations if your close enough to a city with TV stations.
    If your streaming and have a streaming box like a Apple TV or Roku, then the networks like PBS have some shows and series available on their app, but not live TV.

  • Change focus order for only a few components

    Hi,
    I have a frame with lots of components, I wish to change the TAB order of only 2 components in that frame. I know that I have to use my own FocusTraversalPolicy and set it using setFocusTraversalPolicy(). But this requires me to handle ALL the components in the getComponentAfter() and getComponentBefore() which I dont like, I need to handle this for only 2 components.
    Any Ideas ?
    Cheers
    Sunil

    Never mind, found a solution for my case. The policy can be set on a tabbed pane, for only the components on it (even if it isn't a cycle root). In other cases, like a panel, nothing prevents from defining the components before first and after last, both outside the panel...
    T.

  • Except for telephone ringtone, all alerts sound for only a few seconds following latest os update

    After updating my Z10 to the latest operating system this week, I found that alerts for my BBM, Wotsapp, Sms and email only sound for about 8-10 seconds.  My ringtone for calls is played in full though.
    All of the alerts used the correct tones (.mp3 tracks); nevertheless, I reset them by navigating each app to the correct alert.  But nothing changed.
    Is there a way to resolve this please?  I need more time to hear an alert when not in a quiet environment.
    Has anyone else had the same problem?
    Many thanks.

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • Why does my song play for only a few seconds?

    I purchased & downloaded an entire album from itunes but the first song, the title track, will only play for a few seconds before skipping to the next song. It's a 3min long tune but all I get is 3-4 seconds of play. How can I ensure that I get the entire track that I paid for?

    If you can do a second download in your country delete the track completely from your iTunes library, then re-download.
    Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud and iTunes Match Availability by Country - http://support.apple.com/kb/HT5085 ); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this).  Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple recommends  "you always back up your iTunes library in the event that a purchased item is no longer available on the iTunes Store."

Maybe you are looking for