ALERTS CLASSIFICATION is missing after transport the ALERTS from dev to QA

Hi Experts!
I have an doubt in Transporting the Alerts Category.
In Development Server we have created a ALERT CLASSIFICATION as PI_ALERTS and under this i am having two ALERT CATEGORY. i have transported the ALERT CATEGORY and Rules. Now in Quality the two ALERT Categories are grouped under ALL CLASSIFICATION and the CLASSIFICATIOON which i created is not there in QA and also my alerts are not working in QA.
Can anyone help to solve this issue.
Thanks in Advance,
Preethi.

Hi!
I have created the alert classification mannually in QA. I have transported the alert rules from DEV to QA.
Now i am getting the mails in the alert inbox but i have used some alert containers but in the mail the value fro the alert container is not displaying.
Can any one give me an idea.
Regard's
Preethi.

Similar Messages

ALV Title Not Display after transporting the Programme from DeV to Qlty

Hellow Experts,
i developed one ALV report with two screens, i transported the report from Development server to Qulaity server.
in Development server report are working fine but in Qulaity server after transporting the TiTle of ALV not display , plz give me some hint , below is my code to display alv title
DATA: alv_grid       TYPE REF TO cl_gui_alv_grid.
DATA:alv_grid_ref type ref to CL_GUI_ALV_GRID.
DATA: layout    TYPE lvc_s_layo.
layout-grid_title = 'Daily Material Reports.' .
DATA: fieldcat TYPE lvc_t_fcat.
I m using ALL METHOD alv_grid->set_table_for_first_display method for display alv .
Thanks,
Regards
Neha.

Hi neha,
use the sap/help link to solve your issue,
[http://help.sap.com/saphelp_erp2004/helpdata/en/0a/b5533cd30911d2b467006094192fe3/content.htm]
if not use the below example code ,
Heading 3 :h3 Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
DATA:
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
For example :
Set grid title
gs_layout-grid_title = 'Flights'.
CALL METHOD go_grid->set_table_for_first_display
            EXPORTING
           i_structure_name = 'SFLIGHT'
is_layout      =gs_layout*
           CHANGING
          it_outtab   = gi_sflight.
Regards,
Saravana.S
Edited by: saravanasap on Dec 21, 2011 8:13 AM

RC 8 error while transporting the query from Dev to Qa - Element missing

Hi All,
I have made a multiprovider by copying one existing one.
I have copies one of the Bex queries using RSZC from the source to Target MP.
While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR)
Has anyone seen similar types before. Any inputs will be highly appreciated.
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM
Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M
End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045
Post-import methods of change/transport request BDAK959603 completed
     Start of subsequent processing ... 20110517070025
     End of subsequent processing... 20110517070045
Kind regards,

Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

While transporting the objects from dev to q or production what are the err

Hi all,
While transporting the objects from one system to another what are the errors we get?
Thanks
Kiran Kumar

Hi Kiran,
The purpose of the Forums is to help people with problems, not to "fish" for answers to what appear to be interview questions. There are many ways to become educated in SAP Administration, such as training classes and help documetnation. Please choose these avenues for your questions instead of making these kind of posts in the Forums.
Best Regards,
Matt

Error while transporting the badi from dev to quality server

Dear Freinds
         Iam getting the error " Method Execution   21.11.2007 11:55:03    (8) Ended with errors "
        i expended the error (with return code as 8) and i found th below errors
Multiple active implementations for definition HRECM00_CALCBASE
Errors occurred during post-handling AFTER_IMP_SXCI for SXCI L
AFTER_IMP_SXCI belongs to package SECE   --- what does this mean??
The errors affect the following components:
    BC-DWB-CEX (Customer Enhancements)
What exactly this error iam not able to trace . Before releasing the object from the
development server i have see any error's are there the extended check hasnt given me any errors either.
The help for this error says that
"Procedure
Deactivate the implementations active for this BAdI definition one by one until not more collisions occur.
You should use transaction SE18 (Utilities -> Adjustment -> Multiple-use interfaces) to solve thes conflicts systematically."
i have did what sap has said ............. i can see that in the quality server a custom badi
of FI module has been in error. Will this be a reason for my badi ...which doesnt have any error..
any one have idea on this error pleae let me know.
regards
saymala r.

hi Raju,
i tried after giving full access but again same error:-
please see the error log below:-
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset PETFAS
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
BPF: Error reading master data
No access to environment 'PETFAS'
End of data checker messages for Appset PETFAS
End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
    EPM-BPC-NW-TRA (Transport)
any suggestion..
thanks,
Ambika

OBJECT SKIPPED while transporting the objects from DEV to QA.

Hi All,
While transporting the objects to Quality, I'm getting a warning saying Objects are skipped.
Can anyone please explain how to get rid of this error? We are facing this issue almost for all the transports which we are moving and the objects do not get transported to the next environment. We have to ask BASIS to use overwrite functionality while transporting to fix this each and every time we face an error.
If any SAP notes are available then please share it to me.
Thanks in Advance.

Hi Srikanth,
Objects of the selected object types exist in your system as changeable even if this system is globally set to not changeable. As a result, these objects are no longer connected to the transport system.
check here........
http://help.sap.com/saphelp_nw04/helpdata/en/0e/a7343e8c7f6329e10000000a114084/content.htm
for this try contact basis team.
Thanks,
Vijay.

Error while transporting Data sources from DEV to Qual

System : SCM 5.0 (SP 8), BI 7.0 (SP 12)
1) We are trying to transport Data source objects from Development server to Quality server.
2) Data sources of Type R/3 and Web Service.
3) We are able to transport the objects from Dev.
4) Once we import the objects to Quality server, the objects are becoming into INACTIVE stage.
Please help... Thanx in advance..
Regards
Manoj

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

After Transporting the request RFC Destination is empty in SWCV and BEA

Hi All,
we are using SAP NW Mobile 7.1 SP08
After transporting the SWCV & Backend adapter, in the transported system the RFC Destination is empty
Please help me to fix this issue.
Thanks and Regards,
Joseph Beevin.

Hi,
When an SWCV is trnasported to a another system,the backend destination will be empty in the target system.,We need to configure the bakcned destination in the target sytem through the DOE Adimin.
DOE_ADmin Portal -->Configuration --->Backend Configuration.
In the backend configuration,select the SWCV for which the destination needs to be configured.Select the parameter "RFC DESTINATION FOR BACKEND"
When the SWCV is selected all the active Data Objects will be listed in the table below
Insert the above parameter to the parameter list(the table below)
Give the name of the availlable backemnd destination name in the "text value" column of the table for each data object and save it.
Now the backend destination is configured correctly in the target system.Please try this..
Regards,
Muralikrishna T.

Replication of Datsources after Transporting the BI request.

Hi,
I am transporting the request from BI DEV to BI PROD. While transporting the request, do i need to replicate the datasources before transporting the request. Do i need to create Source systems before transporting the BI requests from DEV to Production..Pls Suggest.
Thanks,
Siva.

Hi Siva,
If there is any changes done in data source. If yes then you need to transport the data source in source system and then replicate itin production system and then Transport your BW request.
What do you mean by create source system, it might already be created you do not have to create it. If source system is not existing in your BI then you need to create it by creating RFC connection.
Regards,
Kams

Not able to transport the BI Content(Dev) to Production.

Hi Gurus,
<h6>I'm transporting BI Admin Cockpit to prod and its ending with errors.
I've successfully moved it to QA but while moving to Production it is ending with errors.</h6>
<h5>I'm trying to push the below listed objects:</h5>
<h6>0TCT_VC11                    InfoCube</h6>
<h6>0TCT_IS11                     InfoSources </h6>
<h6>0TCT_DS11     DW1CLNT500           Transfer_structure/Transfer_Rules</h6>
<h6>0TCT_DS11      DW1CLNT500           DataSources(3X)</h6>
<h6>ZPAK_4D8CABGMHNNDBZR20LDDZB07Y      InfoPakage </h6>
<h5>Along with these I've collected all the objects which were being used in InfoSource/Communication_Struct.</h5>
<h5>After moving it to Prod it ended with below mentioned error:</h5>
<h6>Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)</h6>
<h6>DataSource 0TCT_DS11 does not exist in source system PW2CLNT100 of version A</h6>
<h6>Mapping between data source 0TCT_DS11 and source system PW2CLNT100 is inconsistent</h6>
<h6>DataSource 0TCT_DS11 does not exist in source system PW2CLNT100 of version A</h6>
<h6>P.S. The DataSource is not from R/3 its BI DataSource.</h6>
<h6>Kindly help me in transporting it to Prod.
Many thanks in advance.</h6>
Regards,
Akhil

Hi Srikanth,
Compare the transport request which imported in QA & PRD from dev then you can find .
If you transported the same request from DEV to QA & DEV to PRD then this might be possible.
because of mapping of source system.
if you have transported same req from DEV to QA & DEV to PRD then plz import that request from QA to PRD.
Please check mapping of source systems in TX: RSA13 in DEV & QA systems.
Hope this will help you.
Thanks,
Vijay.

Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

Execution stops after retrieving the factory from the ServletContext while

Hi,
I just started working with Quartz, so I am clueless as to why I am getting this error. This is my first time tying to integrate Quartz 1.6.0 in a web app. I am using the JSF Framework. Although I have added the necessary jars I am still getting the error above: servlet.jar not loaded. If you follow the java code and server output you can see that after retrieving the factory from the ServletContext there is no further execution . Following is the definition of the class used for scheduling:
Quartz Version: 1.6.0
IDE : Netbeans 5.0
AppServer: Tomcat 5.5
*************************************** JAVA CODE *************************************
* BirthdayScheduler.java
* Created on May 20, 2008, 5:24 PM
package com.csg.cs.cscomwebdev.servlet.timer;
import java.io.*;
import java.net.*;
import java.util.Date;
import javax.servlet.*;
import javax.servlet.http.*;
import org.quartz.JobDetail;
import org.quartz.SchedulerException;
import org.quartz.SimpleTrigger;
import org.quartz.impl.StdSchedulerFactory;
import org.quartz.Scheduler;
* @author Arijit Datta
* @version
public class BirthdayScheduler extends HttpServlet {
/** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
* @param request servlet request
* @param response servlet response
protected void processRequest(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=UTF-8");
PrintWriter out = response.getWriter();
out.close();
/** Handles the HTTP <code>GET</code> method.
* @param request servlet request
* @param response servlet response
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Handles the HTTP <code>POST</code> method.
* @param request servlet request
* @param response servlet response
protected void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Returns a short description of the servlet.
public String getServletInfo() {
return "Short description";
public void init()
System.out.println(" ------------ STARTTING JOB --------------");
// Retrieve the ServletContext
ServletContext theApplicationsServletContext = this.getServletContext();
// Retrieve the factory from the ServletContext
StdSchedulerFactory factory =(StdSchedulerFactory)theApplicationsServletContext.getAttribute("QuartzFactory Servlet.QUARTZ_FACTORY_KEY");
System.out.println(" ------------ FACTORY GOT --------------");
try {
// Retrieve the scheduler from the factory
Scheduler scheduler = factory.getScheduler();
System.out.println(" ------------ SCHEDULER GOT --------------");
// Start the scheduler
scheduler.start();
System.out.println(" ------------ SCHEDULER STARTED --------------");
//Creating a job
JobDetail birthdayJobDetail = new JobDetail("birthdayReminderJob", scheduler.DEFAULT_GROUP, BirthdayReminderJob.class );
System.out.println(" ------------ JOB CREATED --------------");
//Creating a trigger
SimpleTrigger birthdayJobtrigger = new SimpleTrigger("birthdayReminderTrigger",scheduler.DEFAULT_GROUP, new Date(),null,SimpleTrigger.REPEAT_INDEFINITELY, 60L * 1000L);
System.out.println(" ------------ TRIGGER CREATED --------------");
//Scheduling the job
scheduler.scheduleJob(birthdayJobDetail,birthdayJobtrigger );
System.out.println(" ------------ JOB SCHEDULED --------------");
} catch (SchedulerException ex) {
System.out.println(ex.getMessage());
} ************************************* SECTION OF WEB.XML ************************
<servlet>
<description>Quartz Initializer Servlet</description>
<servlet-name>QuartzInitializer</servlet-name>
<servlet-class>org.quartz.ee.servlet.QuartzInitializerServlet</servlet -class>
<init-param>
<param-name>shutdown-on-unload</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>start-scheduler-on-load</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>BirthdayScheduler</servlet-name>
<servlet-class>com.csg.cs.cscomwebdev.servlet.timer.BirthdayScheduler< /servlet-class>
<load-on-startup>1</load-on-startup>
</servlet> *********************************** SERVER OUTPUT *******************************
Using CATALINA_BASE: C:\Documents and Settings\165171\.netbeans\5.0\jakarta-tomcat-5.5.9_base
Using CATALINA_HOME: D:\Program Files\netbeans-5.0\enterprise2\jakarta-tomcat-5.5.9
Using CATALINA_TMPDIR: C:\Documents and Settings\165171\.netbeans\5.0\jakarta-tomcat-5.5.9_base\temp
Using JAVA_HOME: C:\Program Files\Java\jdk1.5.0_02
May 20, 2008 7:27:13 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8084
May 20, 2008 7:27:13 PM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 766 ms
May 20, 2008 7:27:13 PM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
May 20, 2008 7:27:13 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.9
May 20, 2008 7:27:13 PM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
May 20, 2008 7:27:14 PM org.apache.catalina.loader.WebappClassLoader validateJarFile
INFO: validateJarFile(D:\Java Programs\cs\CSCOMWEBDEV\build\web\WEB-INF\lib\servlet.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
log4j:WARN No appenders could be found for logger (org.apache.catalina.session.ManagerBase).
log4j:WARN Please initialize the log4j system properly.
------------ STARTTING JOB --------------
------------ FACTORY GOT --------------
May 20, 2008 7:27:15 PM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8084
May 20, 2008 7:27:15 PM org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
May 20, 2008 7:27:15 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/32 config=null
May 20, 2008 7:27:15 PM org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
May 20, 2008 7:27:16 PM org.apache.catalina.startup.Catalina start
INFO: Server startup in 2802 ms Can anybody please help out? Where exactly am I going wrong?
Thanks a lot!
AD

Your stop condition is "continue if true". This means that, unless you press the button, the while loop will stop after one iteration.
First, you should change the termination condition to "stop if true".
Then you should make the stop button "latch when released" (right-click..mechanical action). Else you don't have a well defined state after the program stops.
You should decide on a reasonable loop rate and enter it for the wait control. (beter use a diagram constant if the value is always the same).
Why do you need to continue reading in a loop? Are you expecting the response to change over time?
Do you want to keep appending to the string indicator or only show the latest characters received?
Maybe you also need a wait between the writing and reading?
Delete the ms timer value indicator, it is completely useless.
Do you get any error codes?
Don't use the run continous button. Use the plain run button.
What device are you communicating with? Do you have documentation?
LabVIEW Champion . Do more with less code and in less time .

Why can't I open and retrieve my files from iPhoto and my address book after importing the files from my Power mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

Why can't I open and retrieve my files from iPhoto and my Address Book after importing the files from my Power Mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

For your addressbook, export the files to vCard on the PowerMac, then bring them over to your Mac Pro. For your iPhoto, copy the Users -> yourname -> Pictures folder to your Desktop on the Mac Pro, and open iPhoto on the Mac Pro holding the command and option keys. Select the library file from that Pictures folder and open it. It should import all the pictures into iPhoto as part of the rebuild process. Other PowerPC to Intel migration issues are covered here: https://discussions.apple.com/docs/DOC-2295

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

That is priceless!!! Thanks! I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement. Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
My error msg is a little different from those previously stated, but close: 0xc18a0201. Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100. I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
Oh heavens, I've had the c6280 a whopping 2 1/2 years! I'm sure they want us poor slobs to have to buy a new one every year & a day! To say nothing of the exorbitant prices for ink. And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!! Yeah, & what's with that not being able to print in BLACK if a color runs out????
Anyway I really loved your essay! It's a classic! And says it all! I hate that we have to be 'slaves' to the electronic 'wonders'!!!

After selecting the value from the list box, want to disable checkbox

hi guru,
After selecting the value from the list box, want to disable checkbox and custom control textbox(container) in module pool.
so please help me on this.
thanx,
man

in PBO,
loop at screen.
if screen-name = your textbox's name.
screen-input = 0.
modify screen.
endif.
endloop.

ALERTS CLASSIFICATION is missing after transport the ALERTS from dev to QA

Similar Messages

Maybe you are looking for