Alerts configuration- getting the actual contents of the payload

Hi
   We are on XI 3.0 SP18 - My understanding so far - on alert category definitions has been that - we can create container variables - pull in - system variables as a part of the contents of the alert message -
Now , if I want to grab the contents of the original payload - which triggered the alert - is it possible to configure to grab this - as a part of the alert category definition - how do we do this ? Has anybody done this before - Correct pointers , suggested solutions will be rewarded rightaway.
( Having the original payload which triggered the alert as a part of the alert message -is extremely useful - since we have a requirement to make a webservice call from the XI box when alerts are delivered- apart from receiving alerts in emails. These webservice calls need to have the critical object key ( eg customer/material ) for which the alerts have been raised and to do this we need the original payload

Hi Karthik,
Assumedly Michal Blog can help you:
<a href="/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated with variables from the messages payload (XI)</a>
Regards,
Udo

Similar Messages

  • I am not getting the Portal Content inside the System Landscape

    Hi,
    I am not getting the Portal Content inside the System Administrations-> System Configuration->System Landscape. This is not visible. I am SAP NetWeaver 7.0.
    What could be the possible reasons?
    Regards
    Kaushik Banerjee

    Kaushik,
    do you have the full tree in Contentadmin? do you have no entry in the systemadmin? or is it just empty in the lower nodes? this would be normal, you don't see the content in systemadmin, just the defined systems.
    kr, achim

  • I can no longer send mail....today I cannot get mail..., I can no longer send mail....today I cannot get mail...a message pops up that says:A copy has been placed in your outbox.Sending the message content to the server failed....any help?

    I can no longer send mail....today I cannot get mail..., I can no longer send mail....today I cannot get mail...a message pops up that says:A copy has been placed in your outbox.Sending the message content to the server failed....any help?

    How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.

  • When I open a message in Thunderbird, I sometimes get the message content of the preceding message.

    When I open a message in Thunderbird, I sometimes get the message content of the preceding message.
    This means that the whole content of the message is replaced by the content of the preceding message. I cannot see the message and have to ask the sender to send it again. Why is this, is my mail system overloaded or what?

    This usually indicates folder corruption.
    Right click the problem folder and select Properties. Then Repair Folder.
    Be prepared to lose messages if the corruption is too bad. It might be a good idea to move any messages that you want to keep to a new folder. Make folders under Local Folders to sort your keeper emails into. It is a good idea not to keep lots of mail in the Inbox anyway as you will see when you read the attached article.
    Read this article about maintaining your system to help prevent this in the future.
    http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

  • Getting the actual size of the result of a query

    Hi,
    I would like to ask if someone knows on how to get an estimate size of the result of a query on a table. To make it more specific, here is an example.
    Let us say I have this table called EMP and it has a column called DATE. I have issued a query like this:
    select * from EMP where DATE < to_date('01-AUG-08');
    I want to get the actual size of the result of the query in bytes or MB. How would i achieve this without creating another table and transferring the data on it.

    You can use SQL*Plus Autotrace to have the data size sent between client and database session:
    SQL> set autotrace traceonly statistics;
    SQL> select * from employees where hire_date < to_date('01/08/08');
    107 rows selected.
    Statistics
            430  recursive calls
              0  db block gets
            123  consistent gets
             11  physical reads
              0  redo size
           9405  bytes sent via SQL*Net to client
            457  bytes received via SQL*Net from client
              9  SQL*Net roundtrips to/from client
              3  sorts (memory)
              0  sorts (disk)
            107  rows processed
    SQL>Edited by: P. Forstmann on 25 janv. 2011 18:55

  • SLDCHECK error-Check and maintain the SLD content for the current client

    Hi experts,
           I am trying to configure PI on QAS box and getting this error when I ran SLD check. This is the only warning/error I am getting in YELLOW and the other messages were in green so thinking that is ok.
    =============
       Calling function LCR_GET_OWN_BUSINESS_SYSTEM
       Retrieving data from the SLD server...
      No corresponding business system found for system NWQ      client 001
        => Check and maintain the SLD content for the current client
        Summary: Connection to SLD works technically, but the SLD content may need maintenance
       => Check and maintain the SLD data content
    ==========
    I went through some threads and readiness check document but not able to get it resolved because I am a developer and not sure about exact steps. Please give me if you have any feedback and if there is admin jobs involved I will get BASIS help but it is totally my responsibilty to get the system up and running. Any help would be greatly appreciated.
    Thanks.
    Mithun

    Hi Mithun,
        Let me know if there is any recent changes/Patching/Upgradatiions in your server....
    Perform Cacherefresh both in ABAP and JAVA Stacks..
    For ABAP level cache go to SXI_CACHE -> RUNTIME->START DELTACACHE REFRESH
    >>>>SXI_CACHE -> RUNTIME->COMPLETE CACHE REFRESH
    CPACACHE:
    For complete cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=full
    For delta cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=delta
    Please let me know if this doesnot resolve your issue.
    Cheers!!!!
    Naveen

  • Iphone error yahoo mail- sending the message content to the server failed

    yesterday i changed my yahoo password (because my yahoo email acct started spamming all of my email contacts) and i also changed password on my iphone 4s settings but now cant send emails (can get them just fine)
    i get the error "sending the message content to the server failed" and the email gets stuck in the outbox.
    i have deleted the yahoo acct multiple times, rebooted the phone and restored network settings, added other yahoo smtp.mail.yahoo.com server, went to the genius bar for an hour, but no luck.  tried a new iphone at apple store and added my yahoo account, but still had the same error from their phone.
    they said contact yahoo- currently awaiting that reply.
    my gmail acct sends emais fine thru iphone.
    any help appreciated
    thanks
    jb

    hi - i posted this in another thread but meant to post it here - oops - i've been following this thread and others for days now - i also have been having safari/email 'sending message content to server failed'/flash 10 plugin problems since latest security/java/qt software update - here's what i recommend and what i'll be doing from now on - before i install any updates via software update i'll be saving the download/installers to a folder as suggested in another topic thread - next i'll be disconnecting my router - and connecting the modem directly to the computer - bypassing the router - once i'm sure configurations/internet/mail are functioning correctly i'll connect the router - all this time my problems were with my router port settings - not safari or flash 10 plugin or mail app - go figure - hope this helps - peace!

  • Mail: 'Sending the message content to the server failed'

    My wife has a MacBook Pro and I have an iMac, both using Tiger and both using Mac Mail with Gmail accounts. We frequently get errors when sending mail - mail cannot send so it puts the messege indefinately in my Outbox. We both recieve mail just fine.
    The exact error is:
    'This message could not be delivered and will remain in your Outbox until it can be delivered.
    Sending the message content to the server failed.'
    I tried changing my port 25 to 587 and it did not seem to work. Any ideas?
    Thank you.

    hi - i posted this in another thread but meant to post it here - oops - i've been following this thread and others for days now - i also have been having safari/email 'sending message content to server failed'/flash 10 plugin problems since latest security/java/qt software update - here's what i recommend and what i'll be doing from now on - before i install any updates via software update i'll be saving the download/installers to a folder as suggested in another topic thread - next i'll be disconnecting my router - and connecting the modem directly to the computer - bypassing the router - once i'm sure configurations/internet/mail are functioning correctly i'll connect the router - all this time my problems were with my router port settings - not safari or flash 10 plugin or mail app - go figure - hope this helps - peace!

  • Sending the message content to the server failed

    I have 2 mail accounts setup in Mail. They are on separate domains I host on my server. One account works great, the other gives this error message every time I try to send. "Sending the message content to the server failed." It offeres me to use a different outgoing mail server.
    I am on latest Lion 10.7.3. mail version os 5.2 (latest). I connect through Airport Extreme.
    I Googled the problem and searched everywhere. I also tried deleting and setting up the account. I checked all my settings (multiple times). There is nothing to fix in settings. The Connection doctor does not see any problems.
    Here is the really frustrating part: Messages actually get sent. The recipeint always receives them. If I try again with the same server, I get the same error message and again message gets sent. But to Mail it is still unsent and sits in Outbox prompting to send.
    I also tried the MTU trick. No luck. I should also say that I have seen this problem before on other accounts. I've also seen it come and go. It happened on Snow Leoprad and Leopard too.
    Any ideas?

    I should add that the account (like the one that works) is setup as POP/SMTP. It is set to use its own domain as outgoing mail server. Again, messages get sent but Mail doesn not think so.

  • Cannot send email via AOL on iPad2 - "A copy has been placed in your Outbox. Sending the message content to the server failed."

    My CEO has an ipad2 and I set it up w/ AOL.  She cannot send any email via her AOL account from her iPad.  She gets a message that says "A copy has been placed in your Outbox. Sending the message content to the server failed."   We've tried it on wifi and on 3G (Verizon version).  I've removed the account and added it, I've tried setting it up as an IMAP account vs. using Apples standard AOL mail setting and nothing seems to work.  The SMTP settings are smtp.aol.com, port 587.  I've tried adding an alternate server/smtp, but I haven't been able to find anything that works.  Any advice or other people having this issue?  It works fine sending an email from her aol web mail.  And unfortunately, having her sign up for a gmail account is not an option.  Thanks

    Interesting.  Firstly I have been on AOL since the early 90s with no current intention to switch as my primary personal email account.
    I have two email accounts on my iphone - AOL and my email from my business website.  I deleted both and then recreated first the business account and then the AOL account.  Same error.  Then I wasn't sure what you suggested but I turned off the AOL SMTP server and selected the business email SMTP server by turning it on with the same result.  I still get the error "A Copy has been placed in your Outbox.  Sending the mssage content to the server failed."
    Perhaps this problem will get fixed by IOS 6.   AOL will not talk to me unless I pay and Apple says its not their problem.  So for the time being I use the AOL web interface in the iPhone's Safari to send emails from the phone.

  • TS3899 Tried all the tips on line. Every time I try to send an e-mail, it gives me this message, "A copy has been placed in your Outbox. Sending the message content to the server failed" Any help in how to resolve would be appreciated

    I went through all the steps to try to resolve getting the message in a box every time i try to send an e-mail. What next ?
    Message is " A copy has been placed in your
                        Outbox. Sending the message content to the server failed."
    Any assistance would be greatly appreciated. My internet works fine as I can send e-mails from my Yahoo account on my MAC no problem.
    Address is fine etc.

    How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.

  • I am trying to use a interactive form and it says "If this message is not eventually replaced by the proper contents of the document, your PDF  viewer may not be able to display this type of document."  This is a IRS form and has worked before.

    I am trying to use a interactive form and it says "see below"  This is a IRS form and has worked before.
    is there a tech support phone number?
    Please wait...
    If this message is not eventually replaced by the proper contents of the document, your PDF
    viewer may not be able to display this type of document.
    You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by
    visiting http://www.adobe.com/go/reader_download.
    For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.
    Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark
    of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries

    That means you are looking at the form online with a browser that uses its own (incompatible) PDF viewer, not the Adobe Reader plugin.
    Either
    download the form to your local disk and fill it from there
    use a browser that employs the Adobe Reader plugin
    configure your browser to use the Adobe Reader plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • I cannot open a PDF in either Chrome or Firefox. I have uninstalled and reinstalled Adobe Reader XI.0.09 and restarted my computer.   This is the error I receive:Please wait...    If this message is not eventually replaced by the proper contents of the do

    I cannot open a PDF in either Chrome or Firefox. I have uninstalled and reinstalled Adobe Reader XI.0.09 and restarted my computer.   This is the error I receive:   Please wait...    If this message is not eventually replaced by the proper contents of the document, your PDF  viewer may not be able to display this type of document.    You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by  visiting http://www.adobe.com/go/reader_download.    For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.    Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark  of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other  countries.

    Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • Sending email error with Yahoo: "A copy has been placed in your Outbox. Sending the message content to the server failed."

    HELP!  Why am I getting this error message? It's driving me crazy! When I try to send an email,  the message stalls in the outbox and the following message pops up -  "A copy has been placed in your Outbox. Sending the message content to the server failed." I have deleted and reinstalled the account, restarted the phone, etc - what the heck? The emails work just fine at Yahoo online, so the account it fine...I don't want to hard reset the phone, as I had to do that recently and it's a pain - any suggestions?

    OR they are the right settings but you are trying to send through a different internet provider or 3G provider, that does not allow that SMTP server to send email.
    if I send email from 3g or someone elses wifi on a different ISP, it will not work, because it does not allow that server to be contacted. this is normal.
    What you want to do is setup a gmail account and use their SMTP server settings for the defauly outgoing server. that way you dont have to worry about this.

  • Com.sap.aii.utilxi.misc.api.BaseRuntimeException:An invalid XML character (Unicode: 0x1f) was found in the element content of the document

    Hi,
    I'm getting the below runtime exception during IDOC- SOAP message mapping in Integration engine.
    "Runtime exception occurred during application mapping com/sap/xi/tf/<<<\\Message mapping object name\\>>>; com.sap.aii.utilxi.misc.api.BaseRuntimeException:An invalid XML character (Unicode: 0x1f) was found in the element content of the document"
    I have no clue why this exception occurs. Could anyone say the reason of the exception?
    Thanks!
    Regards,
    Gopi

    Hi Gopinath
    Check this thread
    An invalid XML character (Unicode: 0x1d) was found in the element
    Kind regards
    Javi

Maybe you are looking for