**Alerts could not be receive by all Receipents

Hi all,
I configured Alerts with 4 receipents.
Two receipents and the server are in the network A
other two receipents are in network B
I am in network B who configured Alerts.
Only the other person who is in my network ie B could able to receive the alerts and not receipents in the network A.
Both A and B are connecting to the server through same VPN.
Any openions on this Behavior?
Thanks,
Srinivasa

HI,
I think it is related to SMTP configuration problem, check with basis team they will configured for external system. Here problem is system unable to send alrt to external system

Similar Messages

MUST SPECIFY TABLE TO SELECT FROM ,2 RECEIVED ALERTS COULD NOT BE PREPARED

**Dear All, I get this Error"MUST SPECIFY TABLE TO SELECT FROM ,2 RECEIVED ALERTS COULD NOT BE PREPARED"** Please help me solve this
SELECT T1.AcctCode, T1.AcctName FROM OACT T1 WHERE (T1.AcctCode ='ACACBB0001' OR T1.AcctCode ='ACACBBBP01' OR T1.AcctCode ='ACACBBBP02' OR T1.AcctCode ='ACACBBBP03' OR T1.AcctCode ='ACACBBBP04' OR T1.AcctCode ='LLFSLCC001' OR T1.AcctCode ='LLFSLCC002' OR T1.AcctCode ='LLFSLTL001' OR T1.AcctCode ='LLFULFO001')
AND T1.AcctCode NOT IN (SELECT T0.Account FROM JDT1 T0 WHERE T0.REFDATE<='[%0]' AND (T0.Account ='ACACBB0001' OR T0.Account ='ACACBBBP01' OR T0.Account ='ACACBBBP02' OR T0.Account ='ACACBBBP03' OR T0.Account ='ACACBBBP04' OR T0.Account ='LLFSLCC001' OR T0.Account ='LLFSLCC002' OR T0.Account ='LLFSLTL001' OR T0.Account ='LLFULFO001' ) )
Regrds
MD Zubair

change the query as
declare @date datetime
SELECT @date = T0.refdate FROM JDT1 T0 WHERE T0.REFDATE ='[%0]'
SELECT T1.AcctCode, T1.AcctName FROM OACT T1 WHERE (T1.AcctCode ='ACACBB0001' OR T1.AcctCode ='ACACBBBP01' OR T1.AcctCode ='ACACBBBP02' OR T1.AcctCode ='ACACBBBP03' OR T1.AcctCode ='ACACBBBP04' OR T1.AcctCode ='LLFSLCC001' OR T1.AcctCode ='LLFSLCC002' OR T1.AcctCode ='LLFSLTL001' OR T1.AcctCode ='LLFULFO001')
AND T1.AcctCode NOT IN (SELECT T0.Account FROM JDT1 T0 WHERE T0.REFDATE<=@date AND (T0.Account ='ACACBB0001' OR T0.Account ='ACACBBBP01' OR T0.Account ='ACACBBBP02' OR T0.Account ='ACACBBBP03' OR T0.Account ='ACACBBBP04' OR T0.Account ='LLFSLCC001' OR T0.Account ='LLFSLCC002' OR T0.Account ='LLFSLTL001' OR T0.Account ='LLFULFO001' ) )

From an iPhone 5, I receive the following error message when trying to download content from a radio show app: "Alert Could not parse feed." How do I fix?

From an iPhone 5, I receive the following error message when trying to download content from a radio show app: "Alert Could not parse feed." How do I fix?

Since you're using a 3rd party app, suggest contacting the app developer or looking at their support site for help.

Alert Could not parse feed

From an iPhone 5, I receive the following error message when trying to download content from a radio show app: "Alert Could not parse feed." How do I fix?

Since you're using a 3rd party app, suggest contacting the app developer or looking at their support site for help.

Outlook 2011 SP2 Mac Clients - Mail could not bve received at this time...

After Upgrading to Office SP2 for the Mac, our Mac Clients can no longer Connect to the Exchange server
Server: Version 14.1 (Build 218.15) / 0.1 (8.0.535.0)
Client:14.2.2 (1202421)
The Error we get just after launch is:
Mail could not be received at this time. The server for account "" returned the error "Logon failure: unknown user name or bad password." Your username/password or security setting may be incorrect. Would like to try re-entering your password?
When this happens and you click yes, to try to enter your password again, your account typically gets locked out on the AD Domain after a few attempts.
We have tried the keychain workaround/solution to no avail, we have rebuilt Profiles, Cleaned and Compressed the Identity Database, etc... No Love
I can login to the https://mail.domain.com//EWS/Exchange.asmx url and it comes back with the WSDL file.
The only thing I have found that Might be a possible solution was this:
http://www.exchangeranger.com/2011/03/mac-outlook-2011-clients-getting-bad.html
Basically says to: Removed the EWS VirtualDirectory and recreated the EWS VirtualDirectory
Okay that's fine and all if None of our EWS services were working, though we have several other systems (non Mac) that are talking to the Exchange server via EWS (Web, Custom VB Apps, SQL SSIS, Azure Compute Service and many more) So I really don't want to
Blow away the EWS if everything else is working fine.

Here are the log entries from the IIS web:
I'm guessing these first three entries are from iCal, that is working fine.
2012-09-17 03:50:23 10.1.1.15 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 Mac+OS+X/10.8.1+(12B19)+CalendarAgent/47 401 0 0 15
2012-09-17 03:50:23 10.1.1.15 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 Mac+OS+X/10.8.1+(12B19)+CalendarAgent/47 401 0 0 30
2012-09-17 03:50:23 10.1.1.15 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 Mac+OS+X/10.8.1+(12B19)+CalendarAgent/47 401 0 0 15
This is where I started Outlook:
2012-09-17 03:51:57 10.1.1.16 POST /autodiscover/autodiscover.xml - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 0 0 264
2012-09-17 03:51:57 10.1.1.16 POST /autodiscover/autodiscover.xml - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 1 2148074254 46
2012-09-17 03:51:58 10.1.1.16 POST /autodiscover/autodiscover.xml - 443 DOMAIN\Username 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 200 0 0 1025
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 0 0 46
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 0 0 46
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 1 2148074252 77
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 DOMAIN\Username 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 200 0 0 186
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 0 0 15
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 1 2148074252 46
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 1 2148074257 31
Connecting to: https://mail.domain.com/autodiscover/autodiscover.xml
comes back with a Username and Password Prompt, and then displays:
<errorcode style="font-family:Times;font-size:medium;line-height:normal;">600</errorcode> <message style="font-family:Times;font-size:medium;line-height:normal;">Invalid
Request</message>
Connecting to: https://mail.domain.com/EWS/Exchange.asmx
Redirects me to the following URL: https://mail.domain.com/EWS/Services.wsdl
What else do you need?

Google Maps Error Message - "Driving directions could not be received"

Hi guys, i've had my iPhone for quite a while now and lately I'm getting the error message "Driving directions could not be received" when I'm in the maps application. I've reset the phone and I'm still getting that message. Any ideas as to whats going on?

Don Collins,
Have you reset the iPhone by holding down the top and home buttons until you see the Apple logo? If it works after that, a reset fixed it.
Before we continue, please sync with your computer, so that we know the computer has your latest information. In addition please download any photos you have taken with the iPhone to your computer.
Then go to settings -> General -> Reset all settings, and try plotting the directions. Does it work?
If it does, we are going to try a few more steps to try and isolate where your issue might be occurring.
If it doesn't, try restoring the iPhone, and when prompted let it load the data from backup.
Does it work? If so, great. We fixed it with a restore.
If it still isn't working, I would suggest we try a restore, but not load the information from the backup on the computer and see if it starts working.
Thank you,
Nathan C.

Driving directions could not be received

I love this phone, I probably use the maps feature more than anything because I travel alot, but lately when I try to get directions it says driving directions could not be received. It used to only do this when I tried to go from Dallas to London, but now it wont let me go to the other side of town. I know both addresses are correct, they come up by themselves. Ive reset the phone twice and it hasnt helped. Any help would be appreciated. Thanks
Message was edited by: CodyC815

I just put in the cities and states and it went right to it. Point to point.
All I originally had was street address, city, state, and zip and no dice.

I have had itunes on my computer (Vista) for years. It suddenly "disappeared" could not be opened at all although still in programme list. I ininstalled it and have tried to download again. I get a message it cannot be downloaded, no explanation. Help!

I have had itunes on my laptop for years, no problems. A couple of weeks ago I could not open it at all. It still showed in programmes. I uninstalled it and have tried on a number of occasions to download again. I have been unable to do so. No explanation just "couldn't be downloaded". The Apple page just goes immediately to page "Now that you have downloaded itunes", but of course it has not downloaded.
I have another newer laptop and the itunes on that is fine. Recently got automatic updates - no problems.
Anybody got any ideas? Please

See the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2

What should I do about the alert "Could not initialize the application's security component...." Firefox no responding.

When I open up firefox I get the alert:
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
When I click OK I get my home page (google), but nothing works: no web sites will open. I have downloaded the new version of firefox and carried out a defraggle without success.

This solution worked for me:
http://support.mozilla.com/en-US/kb/Could+not+initialize+the+browser+security+component
The step that worked for me was to locate and delete the cert8.db file.

The import Alert could not be found sdk 4.5.1 ????

For some reason I switched my sdk in compiler options to 4.5.1 and most of my classes are not recognised in the import statements
import mx.controls.Alert;
import mx.controls.TextInput;
import mx.events.FlexEvent;
import mx.formatters.DateFormatter;
The import Alert could not be found.
The import DateFormatter could not be found.
etc
what is going on friends?

Hi,
Can you open your project properties and check in Flex build path if under current SDK node "mx.swc" is listed in SDK libraries (it should if project is configured for 'MX + Spark' component set)?
regards,
Peter

Mail could not be received at this time outlook 2011 for MAC

I am connected to Outlook 2011 MAC for 10 minutes then I get disconnected. I get this error message "Mail could not be received at this time. The server account for "cbcf" retuned the error "Logon failure unknown username or bad password" your username/password
or security settings may be incorrect. Would you like re-entering your password ?

Hello,
1.
Under the Account Settings tab, the
Exchange Server field.
https://my.internal.owa.server.name/exchange/[email protected]
Be sure to use
/exchange/ rather than some other directory, and
include your full email address afterwards.
2.
On the Advanced tab, for the
Public folders server, I use this URI:
https://my.internal.owa.server.name/public/[email protected]
Once again, use
/public/ not some other directory.
For more reference about the symptom:
http://www.mackb.com/Uwe/Misc/SR.aspx?p=Logon+failure+unknown+username+or+bad+password++mac
You can also create a new thread on the Entourage forum blow:
http://www.officeformac.com/ProductForums/Entourage/6170
Thanks,
Simon

My iTunes library shows all music but there is an exclamation mark to the left on all entries and there is a message stating "original file could not be found" although all music is on the iPad.

My iTunes library shows all music but there is an exclamation mark to the left on all entries and there is a message stating "original file could not be found" although all music is on the iPad.

The massage means what it says. iTunes can't find the actual music files. All iTunes has is a database of where the files should be and they are not there.
Try:
- iTunes: Finding lost media and downloads
- Redownloading iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT2204 Why is the app store not synced with icloud? Have so many logins and cannot login to one or the other sometimes. Wanted the latest updates to an app my friends already got and could not get the update all day long.

Why is the app store not synced with icloud? Have so many logins and cannot login to one or the other sometimes. Wanted the latest updates to an app my friends already got and could not get the update all day long.

In after 10 hours. Magic...

HT4641 Hello there i am using the latest version of pages but when I imported a word do.ument with some figures ( mainly pictures, X-rays, CT scans, and ECG ) I could not find them they all vanishes although the text was perfectly displayed . Can anybody

Hello there i am using the latest version of pages on ipad3 but when I imported a word doument with some figures ( mainly pictures, X-rays, CT scans, and ECG ) I could not find them they all vanishes although the text was perfectly displayed . Can anyone help.
Thanks

Thank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM

Error: System.Management.Automation.RemoteException: Federation information could not be received from the external organization.

Greetings.
I'm getting 2 errors and 1 warning in the Hybrid Configuration object:
INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.
INFO : Session=Tenant Cmdlet=Get-FederationInformation FINISH Time=2620.7003ms
INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.
INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig START
INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig FINISH Time=203.229ms
WARNING : Office 365 was unable to communicate with your on-premises Autodiscover endpoint. This is typically due to incorrect DNS or firewall configuration. The Office 365 tenant is currently configured to use the following URL for Autodiscover
queries from the Office 365 tenant to the on-premises organization - https://autodiscover.SanJuanCiudadPatria.com/autodiscover/autodiscover.svc/WSSecurity. See the following article for further information: http://go.microsoft.com/fwlink/p/?LinkId=275838
Any help would be greatly appreciated.
Hello World.

Hello,
If the IIS configuration is missing the svc-Integrated handler mapping, the issue may occur. Please try to refer to the following KB to check if the issue can be solved.
http://support.microsoft.com/kb/2626696
Please check if there is A record for autodiscover on public DNS server or DNS SRV record.
Additional blog for your reference.
http://blogs.technet.com/b/mikehall/archive/2013/08/21/office-365-insight-into-the-hybrid-configuration-wizard-part-2.aspx
Cara Chen
TechNet Community Support

**Alerts could not be receive by all Receipents

Similar Messages

Maybe you are looking for