Alerts for External Email Server or Exchange Server (SMTP)

Hi Everybody,
I have configured alerts for Adapter Engine and able to see messages in Alert Inbox of RWB.
I need to configure the Alert message to an external Exchange server (SMTP).
What are the settings which need to be done to achieve this?
Also Can we link the Alert Inbox to our SAP Inbox?
Can somebody help me out on this?
Thanks & Regards,
Zabiulla

Hi Zabiulla
Follow these steps
1)Goto t-code SCOT; double-click SMTP and specify the mail-host and mail-port for the respective mail server.
2)Make the u2018Node in useu2019 check box as checked.
3)Click on the u2018Internet->Setu2019 button under u2018Supported address typesu2019 to specify the email-address of the recipient.Specify the email-address of the recipient who is going to receive the alert mails.
(OR) Specify u2018*u2019 in case of multiple email-ids.
4)Goto Menu->Settings->Default Domain and specify the domain id of the company.
Save the settings done in SCOT
.5)Specify the recipientu2019s user-id; for the particular user-id specify the email-address in the Address tab of t-code SU01.
Regards
sabyasachi

Similar Messages

How to move all emails from mailbox to an external email account in Exchange Server 2007?

I have a user who is leaving the university in a few days. The user would like to forward all of their old emails from their mailbox to their G-mail account. Will setting up email forwarding forward all of the old emails to the G-mail account or just the
new emails that are received after setting up email forwarding? If forwarding isn't the correct solution; then what is? We are running Exchange Server 2007.

No, as you've suspected the forwarding will only affect new messages coming into the mailbox, not existing ones. Additionally, if you did get all existing messages to forward to another account (you could probably do it by creating a rule in Outlook) then
the gmail account would show every single one of them as arriving now, and lose their existing send date.
Probably a better option would be to export the mailbox to .pst, and then assuming the user has their gmail account configured in Outlook somewhere as something other than POP3 they can then open the .pst file on their machine and copy the messages over
to their gmail account, which I think would also preserve the original information.
You could do that via the server using Export-Mailbox as described here
http://technet.microsoft.com/en-gb/library/bb266964(v=exchg.80).aspx (note it has to be run from a 32-bit OS with the Exchange Management tools installed), or the user could just as easily do it themselves from within Outlook using the Export option.

Customize daily email alerts for low storage on drive on server

Hey, Hi, All,
Thanks for the fantastic discussions, information, advice here. Great stuff.
We have a server that sends email alerts for low storage on the file server. And we like those. But it is alerting us to low storage on the TimeMachine drive. We dont want it to alert us for the TimeMachine drive but we do want to be alerted to the other drives. We have seen a little bit of hacking going on out there on the interwebs but not yet anything that seemed quite enterprise-grade.
If any one knows how to instruct the OS to monitor some disks but not other disks, please let us (and everyone else) know.
Thanks much.
Jason

Hi @unslog,
I see by your post that you would like to know how to monitor the toner. If it is possible to be emailed notification. I can help you.
Unfortunately there isn't a way to be emailed notification of the toner level that I am aware of.
You might be able to get a App to do this. I did come across this forum that you may take a look at.
Email notifications on Network Printer Ink/toner level.
You can check the toner level a few ways.
Toner-level status light on the printer. You do not need to replace the supply at this time unless print quality is no
longer acceptable.
Access the printer's Embedded Web Server, by typing the IPv4 address in the address bar of a web browser. If the printer is networked.
Print a Supplies Status Page. On the printer, go to Setup, Reports, Supplies Status.
If you are using the older ePrint website, you should be able to view the toner levels there. If you are now using the HP Connected web site, it should provide any errors for the printer, but I don't believe it will show the toner levels.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can LabVIEW send an email through Microsoft Exchange server without an account set up in Outlook?

I've found sample code that shows how to send email through Outlook using LabVIEW. On any computer I log into on our network, my profile loads and I have access to the exchange server through Outlook so the code works.
However, I am developing a program that will run on a lab computer with a generic PC login that is shared among everyone in the lab. Exchange server/outlook is not set up for the generic user.
Is it possible to have labVIEW send an email through the exchange server with a server name, username, and password coded into the executable?

You would need to send a standard SMTP message via Exchange. The Exchange server will likely require authentication, so you won't be able to use the built-in SMTP VIs, as they do not support authentication. If you're on Windows you can use .NET (see this example), or use the OpenG SMTP VIs.

Using Exchange Web Service (EWS) Streaming Notifications for a shared mailbox in Exchange Server, works or not?

Hi,
I am planning to develop an application to use EWS managed API streaming notification for listening the new email event of a shared mailbox. Will it will work or not? I knew it works for a personal mailbox, where the authentication of EWS can be performed
with the associated Active directory account. For the shared mailbox in Exchange Server, is there such an Active Directory account associated?
Thanks,
Richard

>> Are you saying that if an Active Directory account has the access to a shared mailbox, and then this account can be used for creating the Streaming subscription for that mailbox
Yes that's correct (try it yourself with the EWSEditor)
>> In other words, the way how Exchange Server works is that the new messages like new emails are automatically sending to all of the AD accounts which have the access to a mailbox.
Not sure what you mean by this ? A Shared a Mailbox is just like any other Exchange Mailbox if you have rights to the Folder then you can create a subscription against it. There is no automation involved.
Cheers
Glen

Actionable emails with MS Exchange Server

Using Exchange for e-mail, and my understanding is that we must enable IMAP/POP3 email on our Exchange server to get the BPEL actionable e-mails to work. But my Exchange experts strongly advise against us turning on these types of messages, at least on our main Exchange server. It is a global setting, and apparently one which creates numerous security risks.
Attempting to configure actionable emails with MS Exchange Server as the email system. Does this require enablement of IMAP/POP3 on the Exchange Server to get actionable emails to work? Specifically, for the EmailAccount/IncomingServerSettings within the ns_emails.xml file, what configurations are required when the email system is Exchange Server?
I'm looking to confirm or deny this configuration requirement for MS Exchange Server.
Thanks,
Tim

Try http://www.lavantech.com/smtpmailer
This isnt the right place to market your product. If you've forgotten what this forum is used for, you better ask someone.
You don't have to refer users to your application and asking them to try it. Of course not for free. You will be reported if you continue.

Streaming Notifications for a shared mailbox in Exchange Server, works or not?

Hi,
I am planning to develop an application to use EWS managed API streaming notification for listening the new emails of a shared mailbox. Could you please tell it will works or not? I knew it works for a personal mailbox, where the authentication of EWS can
be performed with the associated Active directory account. For the shared mailbox in Exchange Server, how it works?
Thanks,
Richard

If you are using EWS to access a mailbox other than the one connected to a specific account, you will want to check out EWS impersonation. I've found it to be more reliable than any other method for accessing a second mailbox.

How to read emails from Microsoft Exchange Server

I have microsoft exchange server and I want to read emails from microsoft exchange server. There is no POP3 server. So is it possible?
If it is possible to read emails from microsoft exchange server then please give me some idea.
Thanks
Santanu

santanu wrote:
Hi,
My company is using Microsoft exchange server.
IMPA and POP3 has been disabled, but my requirement is I wan to read email.Then ask the administrator of the server to enable IMAP. If you have a valid business requirement to do that, there would be no reason for the administrator to refuse.

Iphone Email Setup - Microsoft Exchange Server

We have an exchange server and as a result having a little problem getting my email acct setup so I can "send" and "reply" to email... I can now receive email but cannot send/respond..
My IT dept is looking into it and asked me...
If you could find out if that device (IPhone)has a fixed IP address then we can get this resolved pretty quickly.
Suggestions please...
Tom Porter

I've also found sending email via an Exchange server to be problematic (intermittent but mostly not sending). I've laid it to the server I'm using, but this thing is still young. Some other sites also have reported Exchange issues.
Some reports have said Apple is going to address this issue in an update, but since many people were wrong about Exchange support in the first place, I'm biding my time.

Config OES/sendmail to forward email from/to Exchange Server

Hi
I have installed an OES on a Red Hat ES 3.
But on my network i have a Exchange Server that send/receive all emails. And i cannot change here nothing(company rules). Now what i need to do? I need to config the Linux sendmail to relay on the Exchange Server(the exchange is now configured relay on Linux) to forward the emails that i need.
I only need this to one email account e.g [email protected] The Oracle Email Server is running, but i need to config the Linux to forward the email to the Exchange Server, and go to outside. Also i need that receiving an email to [email protected] that my Linux receive this email from the Exchange Server.
I have configured the sendmail.cf like Oracle says on the Administrator’s Guide manual. I have add the ip and name of the Exchange on /etc/mail/access to relay. But still i cant send emails outside. If i test the sendmail -v testuser, and all says ok. I have tested telnet domain 25, and all went ok.
I think the only problem is forward the oes to exchange to forward outside
Any help
Many thanks
Thank you
Jail

Hi andreas
Yes i also think that it maybe resolved by an alias and forwarding
Th COM is the domain in the OES is the com default. Is this domain that you referring?
The company domain that is in the OES(e.g xpto.com) is the same that is in the Exchange. Do you think this will be a problem? Must i create one like oes.xpto.com? To work with the OES?
I have created a relay on the access file, but is this ok? Or must i need change anything else? Mean while i will check that url
And yes i can connect to the Exchange on port 25 from the RH
Since i have several user/account created on the OES, the only think that i did not understand yet is how can they receive any email?
The fax@domain was a example. But i can collect all outside emails from that account and with some rules forward to any other OES account? I think this is possible? Or this is the hard way to configure the OES?
Thank You
Jail

Setting up MX Record for External email Access

To All,
I'm having trouble getting mail sent from external users to email accounts setup on my internally hosted server.
I have setup my server in a Standard Configuration using the following format for my FQDN:
server.mydomain.com (not real name)
I have checked both Primary Zone and Reverse Zone and both check fine.
I can send and receive email, while connected within my local domain, between users I have setup on my server using the format:
[email protected]
I can send email from inside the network to an outside email account, but cannot receive email from any users outside.
I have POP, IMAP, and SMTP ports (110, 143, and 25, respectively) all forwarded to my server thru my AEBS.
Consulting the setup guides, I have found these references to editing the MX record to allow for external email access using the [email protected] format:
+"If you don’t want to use your server’s fully qualified DNS name for users’ email addresses, the+
+DNS service must also include an MX record for your server. For example, if your server’s DNS+
+name is myserver.example.com and you want to have email addresses like [email protected],+
+the DNS service needs an MX record for your server."+....from the Installation and Setup Worksheet, page 15.
also
+"If you want users to be able to send and receive mail over the Internet, make sure DNS+
+service is set up with the appropriate MX records for Mail service:+
+A. If you have an ISP that provides DNS service to your network, contact the ISP and+
+have the ISP set up MX records for you. Your ISP needs to know your mail server’s+
+DNS name (such as mail.example.com) and your server’s IP address."+...from the Mail Service Admin page 22.
My question is...how does the MX record need to be set up?
Like this?
10 @ mydomain.com
Thanks for your help,
Steve

Camelot,
Thanks for replying.
1) What format do you want your users' email address in? (e.g. [email protected], >[email protected], [email protected], etc.)
I want my users to have a [email protected] email address.
I set up an A record as you suggested:
mail.mydomain.com A 1.2.3.4
My MX record was setup:
mydomain.com 10 mail.mydomain.com
However, I am still getting returned email from outside users. They are getting the following error:
+This is an automatically generated Delivery Status Notification+
+Delivery to the following recipient failed permanently:+
[email protected]
+Technical details of permanent failure:+
+Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 5.7.1 <[email protected]>: Relay access denied (state 14).+
Checking the Server Logs for IMAP I am getting these errors:
+Jan 21 12:11:34 server imap[44121]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 12:25:18 server imap[44236]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 12:31:46 server imap[44473]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 12:32:49 server imap[44499]: AOD: crypt authentication error: authentication failed for user: username (-14090)+
+Jan 21 12:37:06 server imap[44598]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 12:49:39 server imap[44520]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 13:01:51 server imap[45049]: AOD: user opts: get attributes for user: user failed with error: -14479+
+Jan 21 13:11:58 server imap[385]: AOD: user opts: get attributes for user: user failed with error: -14479+
When I try and use an online MX Record checker to check the MX record, it says the mail.mydomain.com record is invalid.
It's not until I change my MX record back to:
+@ 10 mydomain.com+
will the MX record show valid.
Network Utility scans show the following with the MX record set to @ 10 mydomain.com:
++; <<>> DiG 9.4.2-P2 <<>> mydomain.com mx +multiline +nocomments +nocmd +noquestion +nostats search+
++;; global options: printcmd++
++wekrugs.com. 3600 IN SOA server.mydomain.com. admin.mydomain.com. (++
++ 2009011900 ; serial++
++ 86400 ; refresh (1 day)++
++ 3600 ; retry (1 hour)++
++ 604800 ; expire (1 week)++
++ 3600 ; minimum (1 hour)++
++ )++
If I have it set up the way you suggested, the Network Utility and MX Checker reports that the NameServers don't respond to the entered MX record name.
Thanks again for your help,
Steve

Different mail alerts for each email account

Just got the new Verizon iPhone. Used BlackBerry for years. One feature of the BB that I think is missing from the iPhone is the ability to set different mail alerts for each email account. For instance, I would like to turn off alerts for my corporate Exchange account (for which I get 100 emails a day), but receive alerts for my Comcast and Gmail accounts.
Am I correct that there is only one on or off feature for the iPhone for all accounts?

That turns the account off for receiving mail as you provided, which I'm fairly certain the OP is not interested in.
The OP wants to be able to turn the new mail alert sound off for one account while leaving it on for another account while all accounts are still checked for new messages.
For instance, I would like to turn off alerts for my corporate Exchange account (for which I get 100 emails a day), but receive alerts for my Comcast and Gmail accounts.

What is available on new Windows servers that allow you to write scripts that can work directly with Windows, SQL Server, and Exchange Server?

What is available on new Windows servers that allow you to write scripts that can work directly with Windows, SQL Server, and Exchange Server?
a. PowerShell
b. isql
c. osql
d. sqlcmd

All questions seem to be from the interview or a test. I think I even took this test once, it's KForce test.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

How to turn off alerts for incoming emails

How do you turn off alerts for incoming emails on the iphone?

Settings>Sounds>Ringer and Alerts>New Mail>Off.

How do I set individual sound alerts for multiple email accounts?

How do I set individual sound alerts for multiple email accounts?

Here: http://www.guidingtech.com/15275/get-different-notifications-per-mail-account-io s-6/
Long and short of it, the settings can be individually changed under Notifications. Select Mail and then the account you want to change the sound to.

Alerts for External Email Server or Exchange Server (SMTP)

Similar Messages

Maybe you are looking for