Alerts for sending mails

Hi all;
i am configuring alerts for sending mails . i am on XI 7.0 SP 2.i am not able to find an option like internal processing in ALRTCATDEF settings configurations.
Can this be the reason why mails are not getting send.

Hi Mudit,
To send an EMAIL, assign an EMAIL ID to the corresponding user in the transaction SU01 and then set up SCOT and you can send emails when the ALERT is triggered.
Once you have configure Alerts, you will get the Alerts into ALERT INBOX in RWB of the user. To also get the email, the following needs to be done,
1. In SU01 -- Assign the Email ID for the Recipient of the ALERT.
2. In , RWB>ALERT INBOX> PERSONALIZATION--> Time Independent Delivery and Email are selected.
3. Finally, SCOT needs to be set up to send Emails. Check this for the same. You can ask your BASIS team to do this step.
http://help.sap.com/saphelp_nw04/helpdata/en/23/1edf098ea211d2b47300609419ed29/frameset.htm
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
Also, to test your Alerts, execute the report RSALERTTEST in SE38.
Also go throuh the following links...
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
Regards,
Abhy
Message was edited by: Abhy Thomas

Similar Messages

Configuring CCMS alerts to send mail

I need to configure CCMS alerts where the alerts will be send to my mail id.
I have configured the seting in RZ21 and activated the alerts
Please tell me the steps to be followed, for sending mails Email in case of any alerts

You basically need to make sure that
1. You can receive emails send from SAP Business Workplace to your SAP/Outlook inbox . This can be done by the Tcodes SCOT, SOST.
2. Configure CCMS_ONALERT_EMAIL_V2 according to your needs (RZ21)
3. Assign this method to the required MTE via RZ20.
This is the broader view. Refer this link and the previous posts for more info
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7da1505211d189550000e829fbbd/frameset.htm
There have been many posts on the same topic previously.
Edited by: Kunal Belnekar on Mar 18, 2008 2:00 PM
Edited by: Kunal Belnekar on Mar 18, 2008 2:01 PM

Config Oracle Alert to send mail

Hi everyone !
I want to setup Event Alert to send mail use Unix sendmail in our project.
My Apps is 9.5.10.2 CU2, i have never applied to Rollup4.( Rollup 4 send mail with WF)
If i want system to sent a message from [email protected] to [email protected], i configed sendmail package successfull. What do i do next step ?
Further, In Page 9.3 of Oracle Alert User's Guide, at Setp 2, How to create Mail System Administrator?
Regard !
Edited by: whoami! on Nov 20, 2009 6:19 PM

I config Alert on other table and see issue following: in only Alert but when 8 row updated then create 8 requests, and auto perform 8 actions to sends 8 same mail.But i want only system to send 1 mail .
Can you help me !
Detail:
When I create 1 PO,i want system to send 1 mail to superior to approval, i use SQL:
=====================
select
created_by,
last_updated_by,
rowid,
authorization_status,
LAST_UPDATE_LOGIN,
approved_flag,
wf_item_type,
wf_item_key,
xml_flag,
submit_date
into
&cby,
&last_updated_by,
&rowid,
&auth_status,
&LAST_UPDATE_LOGIN,
&approved_flag,
&wf_item_type,
&wf_item_key,
&xml_flag,
&submit_date
from po_headers_all
where
(last_updated_by=1147
and created_by=1147
and upper(authorization_status)='IN PROCESS'
and LAST_UPDATE_LOGIN = -1
and approved_flag is not null
and wf_item_type is not null
and wf_item_key is not null
and xml_flag is not null
and submit_date is not null
and rowid=:rowid)
===================
Thanks for advance !

How to create distribution list in workflow? for sending mail or work-item

Hi,
How to create distribution list in workflow? for sending mail or work-item to multiple users.
Regards,
Surjith

Hi Surjith,
A.Working with Distribution Lists Creating a Distribution List.
1 Businees Workplace->shared folder - create new subfolder name = WF_distributor
2.Then click on the distribution list in Businees Workplace.
say create Name = WF_Vliste
folder Name = WF_distributor
3.distribution list content tab
Enter Recipient (SAP User ID)
B.Wrkflow Builder
Find out the dialig step in which u want to use distribution list
Use workflow Rule 30000012 (SWX_READ_DLI).
Maintain the binding from workflow container to rule container.
Just pass the name of the distribution list from WF to Rule container.
Regards
Sagar S

How to raise Alerts for Sender File Channel

Hi All,
For Sender File Channels , we can find out the status of the adapter through RWB as to whether it is Content Conversion related exception or Folder path not found exception & etc .
I wanted to know as to whether there is any way where can rasie alerts for Sender File Channels (similar to what we do for Reciever File Channels) as well.
Regards
Vinay P.

I found it myself .
In Alert Configuration while we are adding alerts for a particular aler category , the following parameters needs to be checked .
Connected to Message : Not Relevant
Sender Service/Party/Interface/Namespace needs to be mentioned.
Adapter Type should be selected as File

Sound for Sending Mail

I've checked all through the forum and can't find an answer, so I hope this is not a repeat...
Is there a way to have a different sound (that I choose) play for sending mail versus receiving mail? I can change the incoming sound in preferences and I've checked the box to have sound play for other events...but it always plays the same sound for every event.
Help!!
MacBook Pro Mac OS X (10.4.10)

I did further reseach and found if you substitute an AIFF file for the "Mail Sent.aiff" file in Mail's package\contents\resources - you can assign any sound. You have to rename the new file exactly the same as the existing. I backed up the original first for safety.
Why isn't there a preference for this??

CLASS cl_bcs Query for sender mail id

Hi,
I am using class cl_bcs.but, i am facing problem for sender mail-id. I want to append mail-id directly to sernder mail-id without using user mail attribute.
Is there ne way from which i can append mail-id as sender mail id??
thanx in advance,
Sameer

you can do that.
check this code sample.
DATA: sender             TYPE REF TO if_sender_bcs.
CLEAR sender .
        sender = cl_cam_address_bcs=>create_internet_address( '[email protected]' ).
        CALL METHOD send_request->set_sender
          EXPORTING
            i_sender = sender.
and check this code sample for complete code.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5931ff64-0a01-0010-2bb7-ff2f9a6165a0
Regards
Raja

Maximum retries for sending mail ( java mail api )

Hi,
How can I set the property "maximum retries for sending mail" for my smtp through java mail api ?
Is there any property that I need to set in the Javamail session or any other way out ?
Thanks.

That's a server property. You would set that in your server configuration. JavaMail is for sending and receiving mail, not for controlling mail servers.

In my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that

in my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that

while sending a email in my ipad it is showing the correct email address([email protected]) in the ""from"" field but in receipients inbox ""from"" field it is showing another email id ([email protected])

TS1307 I am holidaying in Auckland using my daughters orcon internet account for sending mail but it will not send. I am sure I am putting in the correct information but it still says orcon offline. I have spent half an hour with Orcon putting in correct

I am holidaying in Auckland using my daughter's Orcon internet account for sending mail but it will not send. I am sure I am putting in the correct information but it still says mail.orcon.net.nz(Offline). I have spent half an hour with Orcon putting in correct info. They do not know how to help me further and neither does telstra clear, my own internet provider.
Any advice appreciated.

On the Mail menubar > Mailbox, make sure Take all accounts online is selected.

Custom alerts for different mail accounts?

Is there a way to set up different ringtones/alerts for different Mail accounts? I'd like to make my personal and business emails ring/vibe differently.
Thanks.

Nope, as you look in your settings mail only has one option to change the sound and thats for any mail that is recieved.

TS3276 I just upgraded to 10.8.2 and Mail is having a problem. It won't remember my password for getting mail; but it does remember the password for sending mail, i.e., smtp. Does anyone know of a fix?

I just upgraded to 10.8.2 and Mail is having a problem. It won't remember my password for getting mail; but it does remember the password for sending mail, i.e., smtp. Does anyone know of a fix?

The solution surprised even me, and we've been using Macs since 1984 (still have an original 128K).
I contacted Apple support, and because we had just upgraded yesterday, clicked on the "exception" button as opposed to paying the $19.99 one-time support fee. An Apple tech called and the problem was solved in two minutes.
Somehow during the installation of OS 10.8.2 (over 10.6.x) the key chain data for my email ISP login password got corrupted. The solution was to delete both the POP mail and SMTP entries in my keychain.
Back to Mail, it asked for the POP password, I entered it and bingo, mail got busy downloading. Interestingly, the password was also entered into the SMTP panel.
So, that's it. Thanks for you response, Mr. Hoffman, and regards.

Problem assigning an account for sending mail from external mail app

Good morning , i have an IPhone 4s 16gb with IOS 7.0.6 and even in setting-mail and calendar i have setup the default account to use for sending mail outside mail app it use ICloud mail account.
if i select Icloud account and then my gmail account sometimes works but after some days it start again to use the other account...i don't know if it is when i power off the IPhone...if i look into settings-mail and calendar account selected is gmail even the account used is the ICloud.
i think is a IOS bug.
please let me know.
Best regards

Jun T. wrote:
But there is a (high) possibility that Gmail's server requires authentication (or certification) to connect to it.
I wonder if they're simply silently dropping emails in certain cases. I forgot earlier that I have a Gmail account. If I send an email from the command line on my home computer, which is on Comcast, the mail log shows that I successfully connect to Gmail, the message is sent and accepted by Gmail, but the email never arrives in my inbox. I've tried several times with the same result.
However, emails from a web server from work get through to Gmail without a problem. So I'd bet it's a case of them not delivering mail from Comcast IP addresses.
For grins, I also tried sending to my Yahoo email account from my home computer and their server at least refuses the connection and I get an error message stating that it's because it's a residential IP address.
In this case you need an SMTP client (=a software which directly sends the mail to the Gmail server) which supports authentication.
I think this might also be possible with Postfix by editing the configuration files. I know I had to set up authentication to send emails to my work address directly from my home computers, but I haven't been able to get the same thing to work with Gmail yet. If I get a chance, I'll look into it again later tonight.
charlie

Setting Host for sending mails

Hi Xperts
For sending mails to external mail id my internal support team had advised to do the following changes:
"<i>Please configure your host(s) to send to smlolw.lol.com, use default port#90.</i>"
i'm not dure on what he meant by this and where to carry these changes. Can i be guided to have this set properly.
thkx
Prabhu

Hi,
1. Goto transaction SCOT.
2. Double click the SMTP.
Thanks,
Reward If Helpful.

How ca i create a stationery for sending mail with my letter head and logo etc.

I want to use a stationery with my letter head and logo for sending mails. Please tell me how can I create my page.

http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Using_Templates

Alerts for sending mails

Similar Messages

Maybe you are looking for