Alerts from Cisco LMS
Dears I have some concerns about SNMP and Cisco LMS :
Our network device sent a LINK DOWN trap to CISCO LMS followed by LINK UP trap . I can see these messages from the device logs . My questions is :
1-If the device is configured correctly to send snmp traps .And the syslog is showing both messages (LINK DOWN , LINK UP) then we can say the device is sending the snmp traps ?
2-Why the LINK UP trap is missing in Cisco LMS .. What should we check to make sure LMS is sending and receiving these alert in proper way ???
Thanks in advance .
Hi ,
-If the device is configured correctly to send snmp traps .And the syslog is showing both messages (LINK DOWN , LINK UP) then we can say the device is sending the snmp traps ?
Syslogs are different from SNMP traps , If you are seeing syslogs for linkup and linkdown ,it does not mean that device is sending the SNMP traps as well.
2-Why the LINK UP trap is missing in Cisco LMS .. What should we check to make sure LMS is sending and receiving these alert in proper way ???
You can verify the snmp trap by packet capture
Thanks-
Afroz
****Ratings Encourages Contributors ****
Similar Messages
-
Hi All,
I am currently getting buried in a flurry of alerts from Cisco LMS. However when I check on the device in fault manager or with Device Diagnostic Tools, I do not see any issues. Anyone have any ideas as to why these alerts are being generated? ( I have removed our specific info with xxxx)
Additionally, I don't want to seem like I am bashing the LMS product, but could these alerts be made any more cryptic?
ALERT ID = 00001LI
TIME = Wed 24-Mar-2010 01:21:49 GMT-06:00
STATUS = Active
SEVERITY = Critical
MANAGED OBJECT = xxxx
MANAGED OBJECT TYPE = Switches and Hubs
EVENT DESCRIPTION = xxxx: Cisco Configuration Management Trap:InformAlarm; xxxx [xxxx]:Unresponsive;
ALERT ID = 00001LI
TIME = Wed 24-Mar-2010 06:54:37 GMT-06:00
STATUS = Active
SEVERITY = Critical
MANAGED OBJECT = xxxx
MANAGED OBJECT TYPE = Switches and Hubs
EVENT DESCRIPTION = xxxx: STP Topology Change:MinorAlarm; xxxx [xxxx]:Unresponsive;
ALERT ID = 00001LI
TIME = Wed 24-Mar-2010 13:13:16 GMT-06:00
STATUS = Active
SEVERITY = Critical
MANAGED OBJECT = xxxx
MANAGED OBJECT TYPE = Switches and Hubs
EVENT DESCRIPTION = xxxx: vlanTrunkPortDynamicStatusChange Trap:InformAlarm; xxxx [xxxx]:Unresponsive;
ALERT ID = 00001LI
TIME = Wed 24-Mar-2010 13:13:52 GMT-06:00
STATUS = Active
SEVERITY = Critical
MANAGED OBJECT = xxxx
MANAGED OBJECT TYPE = Switches and Hubs
EVENT DESCRIPTION = xxxx: STP Topology Change:MinorAlarm; ess016184.casino.sk.ca: vlanTrunkPortDynamicStatusChange Trap:InformAlarm; xxxx[xxxx]:Unresponsive;
ALERT ID = 00001LI
TIME = Wed 24-Mar-2010 14:05:49 GMT-06:00
STATUS = Active
SEVERITY = Critical
MANAGED OBJECT = xxxx
MANAGED OBJECT TYPE = Switches and Hubs
EVENT DESCRIPTION = xxxx: vlanTrunkPortDynamicStatusChange Trap:InformAlarm; xxxx: STP Topology Change:MinorAlarm; xxxx [xxxx]:Unresponsive;
Thanks,
RickThe alerts are quite generic. The individual EVENT details will contain many more details. Initially, it looks like DFM is showing you trap information relating to config and STP changes. If you have determined that these are not important, then you can clear the events (or mark them as acknowledged). If you're receiving these as notifications (e.g. email notifications), you might consider creating event sets to filter the events to just the ones in which you are interested, then unchecking the boxes for alerts in your Notification Group.
-
Upgrading from cisco LMS 3.0 to a latest version
Hello,
Upgrading from cisco LMS 3.0 to a higher version.
Whatdoes it require?.
What is the current version?
What do we need for upgrading?
Are there specific codes or new need to buy new products?
In case of buying new products, which are the configurations?H Malik,
You are correct! Latest version is Cisco prime LMS 4.2. There is no direct upgrade from LMS 3.x to LMS 4.x.
The procedure is simple:
Take backup orf old LMS --> Un-install (if same machine)--> Install new LMS --> Restore backup to get old data.
You would need to purchase new license for it.Cisco Prime LMS is now part of the Cisco Prime Infrastructure bundle and is not orderable separately. Cisco Prime Infrastructure bundle follows a size-based incremental licensing model. Device licenses can be combined and added when applied to a single server installation instance. Customers have the option of adding incremental licenses for additional devices as their network grows.Refer to the Cisco Prime Infrastructure Ordering Guide located at http://www.cisco.com/go/primeinfrastructure for the exact part number that matches your requirement and placing the order.
Currently even SmartNet or SAS contracts does not cover major upgrades from LMS 2.x and 3.x; an upgrade part number will need to be purchased to move to Cisco Prime LMS 4.2. These upgrade part numbers reflect a significant discount to protect customers' investment in the Cisco Prime product line.
The data migration process will vary depending on the LMS version from which the data need to be migrated. Migrating data to LMS 4.2:
• LMS 4.2 supports local upgrade or direct inline upgrade only from LMS 4.0.1 and LMS 4.1.
• LMS 4.0 customers are encouraged to install LMS 4.0.1 before doing inline upgrade to LMS 4.2.
• LMS 3.2 and LMS 3.2 Service Pack 1 customers can do a remote upgrade through the LMS backup and restore mechanism.
• LMS 3.1, LMS 3.0, LMS 3.0 December 2007 Update, LMS 2.6, and LMS 2.6 Service Pack 1 customers need to do a remote upgrade to LMS 4.0.1 and then upgrade to LMS 4.2.
-Thanks
Vinod -
We currently operate Cisco Prime LMS v4.1 and we're looking to upgrade Cisco PI (Prime Infrastructure) in the next few weeks.
Is there an upgrade path from Cisco LMS to PI? The reading I have completed seems to indicate that an upgrade can only be completed from Cisco NCS.
If I need to perform a new install of PI, can I somehow Migrate / Import my existing device database and config into the new software? I have configured some syslog fault rules for e-mail notification, config templates, custom reports, etc, that I would also like to keep and not necessarily recreate.
Thanks.As cwallin noted, LMS 4.2.2 patch added the ability to migrate some information from LMS to PI.
Most customers would not be well-served by migrating a mature LMS implementation to PI at this time due to the fact that PI does not yet have feature parity with LMS, Even PI 2.0 (due out in a couple of months) will not have complete feature parity.
See this link for a current comparison. -
High Severity alerts from network TAB in LMS 3.1
I have attached the screenshot of the High Severity alerts from network TAB in LMS 3.1
In that it is having alert ID also , could you please update me about this alerts.Click on the alert ID to get more details about the event(s) in these alerts. The events will contain the informative details about the condition of the devices.
-
Problem Exporting Backups from Cisco Prime LMS 4.2 deployed as software appliance
Hi,
I'm trying to backup a Cisco Prime LMS4.2 based on soft appliance. I have the backup stored on destination disk://localdisk/backup/, but i can't export it via FTP to external server. When I perfrom the transfer only the folder is stored in the destination path, the files aren't included. I think that i have to compress files on the backup folder as .tar file using linux shell, but i can´t find the backup folder from this shell.
It´s correct my procedure, if not What is the procedure and commands to export a backup to external server via FTP?
Thanks,Hi Dave,
If your Goal is to upgarde the IOS of the devices via LMS then MANUALLY download the IOS Image from cisco.com
and use the FILE SYSTEM option to add the Image in the Software Repository
Then try to upgrade the IOS and see how it works.
Thanks
Afroz -
Dear All,
I'm using Cisco ASA 5505 Firewall and I want the email alert from my Firewall if the CPU increase more than 70 %. Is it possible, Please help me.
Thanks
VijayHi Vijay,
If can be done but you need any network management software. I personally dont think you can ask your ask to send mails. ASA can trigger alert to a SNMP configured server which will intern send mail to you
HTH, -
Cisco LMS 4.1 Installation on Windows Server 2008 R2, Databases not created
Hi There,
As always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:
DCRServer is down or may not be completely up. Check if the DCRServer process is running.
And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases. Attached is the installation log file, if someone could help me with it would be appreciated. Please note the following:
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
Thanks,Also Here is more info output:
C:\Program Files (x86)\CSCOpx>pdshow -brief
Process State Pid
Tomcat Program started - No mgt msgs received 1572
TomcatMonitor Running normally 2236
Apache Program started - No mgt msgs received 2436
DataPurge Administrator has shut down this server 0
DCRServer Failed to run 0
CMFOGSServer Administrator has shut down this server 0
EssentialsDM Administrator has shut down this server 0
ConfigMgmtServer Never started 0
ConfigUtilityService Never started 0
CTMJrmServer Administrator has shut down this server 0
ChangeAudit Never started 0
SyslogAnalyzer Program started - No mgt msgs received 2976
ICServer Running normally 5096
EnergyWise Never started 0
PMCOGSServer Administrator has shut down this server 0
IPMOGSServer Administrator has shut down this server 0
IPMProcess Never started 0
TISServer Program started - No mgt msgs received 2544
DFMOGSServer Program started - No mgt msgs received 876
InventoryCollector Running normally 3052
Interactor Program started - No mgt msgs received 5136
InventoryCollector1 Program started - No mgt msgs received 5144
Interactor1 Program started - No mgt msgs received 5308
PTMServer Program started - No mgt msgs received 5320
UPMProcess Never started 0
TISDiscoveryJobCreate Administrator has shut down this server 0
SyslogCollector Running normally 5340
Proxy Program started - No mgt msgs received 5348
PMServer Running normally 5360
NameServer Program started - No mgt msgs received 5680
NameServiceMonitor Running normally 5876
LicenseServer Program started - No mgt msgs received 5884
FHPurgeTask Never started 0
EventFramework Program started - No mgt msgs received 5892
EPMServer Program started - No mgt msgs received 5904
FHServer Administrator has shut down this server 0
NOSServer Program started - No mgt msgs received 5580
diskWatcher Running normally 5640
DFMMultiProcLogger Program started - No mgt msgs received 5864
DFMLogServer Program started - No mgt msgs received 4896
DFMCTMStartup Administrator has shut down this server 0
DfmBroker Running normally 6104
DfmServer Running normally 6416
DfmServer1 Running normally 6424
DCRDevicePoll Never started 0
CSRegistryServer Running normally 6432
CSDiscovery Never started 0
AdapterServer1 Program started - No mgt msgs received 6440
AdapterServer Program started - No mgt msgs received 6448
C:\Program Files (x86)\CSCOpx>pdshow DCRServer
Process= DCRServer
State = Failed to run
Pid = 0
RC = -3
Signo = 1073741821
Start = N/A
Stop = 07/02/2012 17:39:06
Core = Not applicable
Info = Application failed or was registered incorrectly.
C:\Program Files (x86)\CSCOpx>net stop crmdmgtd
The Cisco Prime Daemon Manager service is stopping..........................................
The Cisco Prime Daemon Manager service was stopped successfully.
C:\Program Files (x86)\CSCOpx>bin\perl.exe objects\db\conf\configureDb.pl action=validate dsn=cmf
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK locked for the operation...
ERROR: [StandardDbUpgrade] : Database cmf is not installed.
INFO: C:\PROGRA~2\CSCOpx/objects/db/conf/ConfigureDB.LOCK released for the future operations...
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbpasswd.pl all
ERROR: There is no database available to change password.
C:\Program Files (x86)\CSCOpx>bin\perl.exe bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=pwd
'cmf' is not a valid data source for the product. -
Cisco LMS 3.2 SYSLOG not storing after 10 days
Hi ,
Im facing one issue with Cisco LMS 3.2
Issue : The logs is generating only for 10 days and post that im not able to see the logs. I have not done any config changes. The only change i have done is i have completely reinstalled the LMS. i did multiple troubleshoot but not able to resolve this isse. It would be great If any some one is able to help me in this isse. Thanks.
Regards,
JulietDear Vinod
Thanks for ur response and the problem has been resolved.
The purge policy was set to 60 days only .The problem in reports viewing setting.
Syslog folder under LMS would store syslog reports of both the device as well as applications for defined folder size , which in your case was 1 MB ( same can be viewed under log generator option). The older reports would get deleted from the folder upon reaching the limit.
The only way to view device syslog is under following option : Reports -> Reports Generator in LMS GUI where we will have to choose syslog with desired attribute.
Regards,
Juliet -
Cisco LMS 4.0.1 to Prime Infrastructure 2.x Upgrade
Hello,
we are using Cisco LMS and want to upgrade to Cisco Prime Infrastructure.
Now we have received the following license update: L-L-PI2X-100-U - LMS to Prime Infrastructure 2.x Upgrade 100 Device
and I wonder what is the best way to upgrade.
After a long search I found the following document on cisco:
http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/guide-c07-729990.html#wp9000727
There is only the talk of the upgrade from 4.2 LMS to Prime.
The problem is that we can not update to version 4.2 because of an error. Thats one reason why we need to upgrade to prime.
Is the only possibility now to export databases?
thanks in advanceHi Heiko,
Upgarding from LMS 4.0.1 to LMS 4.2 , you need a New Licesne . Are you getting that error..
Upgarding from LMS to PI is alomost like a new Installation of PI. because only thing you can IMPORT from LMS to PI is the device list .
you can download the software from the below link:
http://software.cisco.com/download/release.html?mdfid=284422771&flowid=45323&softwareid=284272932&release=2.0.0&relind=AVAILABLE&rellifecycle=&reltype=all
Installation link:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/install/guide/Cisco_PI_Hardware_Appliance_Installation_Guide/cpi_higmain.html
hope it will help
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors **** -
Collecting information from Cisco switchs using SNMP
Dear All,
I have a wide network with more than 250 sites connected using the DSL. the WAN devices are under the provider responsability and the LAN devices are directly in my responsability. In each site, I have :
1 or 2 Cisco switchs (2960 or 3560), connecting via fibr.
or
Linksys switch connected via ethernet cable
and
cisco 877 router connected to switch
cisco 881G router conected to switch
pc and printers
In order to improve the availibilty of our network, we lauch every day a script from local pc to test connectivity of LAN equipements :
ping to switchs (Vlan 1), ping to ip fa0/0 cisco router1, ip cisco router2, ping to HSRP address (of two router). the resulting ini file will be inserted in a database and exported to excel for analysing.
I'm asking if someone can help in order to implement SNMP and let me know the name of cisco MIB to implement to :
- to have from SNMP information, the result of show cdp nei, show interface status, show ip int brief,...
- to have if wan router LAN interface are up,connected
- others usefuls informations.
Thanks and regards,
AAHi,
the basic SNMP config for 2960 and 3560 is:
snmp-server community <> RO
The configuration for SNMP traps to get alerts from the device if there is for example a failure with a fan is:
snmp-server enable traps
snmp-server host <> <>
This enables all traps available with your IOS version. You can the disable not wanted traps by using the "no"-command like this.
Example for dot1x traps:
no snmp-server enable traps dot1x
With a snmp client you can then do a snmpwalk (or snmp get) without a specific OID to get all the SNMP information from the device:
On a Linux server the following command should work:
snmpwalk -v 2c -c <> -T <>
-v = use SNMP version 2c
-c = use the community string you configured on the device
-T = output in the dotted decimal format
But be careful, this will be a lot of data output.
Here you will find a docu for configuring SNMP on a Cisco device:
http://www.cisco.com/en/US/docs/ios/12_2/configfun/configuration/guide/fcf014.html
Sven -
Cisco LMS 4.2 Appliance on VMware vSphere 4.0
Hi all,
I'm currently trying to install the Cisco LMS 4.2 Appliance on a VMware vSphere 4.0 environment.
I'm following the http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/install/guide/instl.html#wp1689675
guide.
I downloaded the Cisco_Prime_LAN_Management_Solution_4_2.iso and I started the server.
I get this screen and I choose option 1:
A Welcome message appears:
Welcome to Cisco Prime LAN Management Solution 4.2
To boot from hard disk, press <Enter>
The following options appears:
•[1] Cisco Prime LAN Management Solution 4.2 Installation
This option allows you to perform installation of LMS 4.2.
•[2] Recover administrator password
This option allows you to recover the administration password. Follow Step 3 to Step 17 of Recovering Admin Password on Soft Appliance Installed on VMware, to recover the administration password.
•<Enter> Boot existing OS from Hard Disk
This allows you to boot up the existing OS available in the hard disk.
However, unlike the installation on my laptop (using VMware Workstation) I cannot get to this part:
Enter the following configuration details of the server:
•Hostname
•IP Address
•Subnetmask
•Gateway
•DNS Domain
et cetera
What follows looks like an installation to me.
When this stops I get a
localhost login:
I cannot enter Setup as I get a password statement afterwards.
Can somebody please help me as I'm having no idea what went wrong..
Many thanks in advance.Thanks for your help, Marvin.
We went ahead with the .ova file and it worked alright.
We also did a little test and it seems that the .iso file does work on some VMware platforms. Our test environment had a VMware vSphere 4.1. When we started a VM with the same specs and the ISO file mounted, the installation did succeed. -
Cisco LMS 4.0 Getting Error
I am trying to install LMS 4.0 getting errors(Attached error)
Hi,
Go to the software download section on Cisco website and search there for a patch that is specifically posted there for installing LMS on a Windows Server 2003 R2 machine.
According to the readme file for LMS 4.0, you must use this "patch" if you want to install LMS on this OS. Read more in the readme document for LMS 4.0
Please mark this as an answer for your question if it does solve your problem.
Sent from Cisco Technical Support iPhone App -
Collector Configuration for Cisco LMS
Hi,
I have a cisco LMS 3.2 , what collectors need to be configured inorder to get the critical alarms such as HighBroadcast Rate in networkDevice Fault Manager (DFM) is the module or application that would give you these kind of alerts;
a quick overview about DFM can be found here
first I recommend to install all available updates and patches for LMS;
after the initial discovery of LMS to get your devices into DCR you have to import device into DFM as described here
DFM is working with SNMP polling, thus you should get the events in the AAD (Alerts and Activities Display) if DFM has SNMP access to your devices;
Be aware, that DFM counts non-unicast packekts for the HighBroadcast Rate (broadcast and multicast packets; ifInNUcastPkts + ifOutNUcastPkts)
also read the user guide for DFM to get a general understanding of DFM -
Good day team,
is there any major difference between them more than the one belows
Cisco LMS
only cisco devices
easy to manage
can use cisco discovery
HP OPEN view
MultiVendor
hard to manage
can not use deivce discoveryHi,
I dont have a much experience with HPOV, but i can share more benefits from what you have already mentioned about
CWLMS, due to which I think it surpasses HPOV in many sense.
CiscoWorks LMS is a very powerful management tools that simplify the configuration, administration, monitoring, and troubleshooting of Cisco networks.
Following are some of the more detailed features which separate LMS from any other NMS software :
> A strong next-generation device discovery is done using cisco Propreitary CDP and other new technologies, modules and protocols like HSRP, ARP, BGP, OSPF, Cluster Discovery Module, LLDP, and routing Table as well.
> Real-time network fault analysis with easy-to-deploy, device-specific, best-practice templates.
> Hardware and software inventory management, centralized configuration tools, and syslog monitoring.
> Monitoring and tracking of network response time and availability via IP SLA
> Real-time device and link management, as well as port traffic management, analysis, and reporting.
> Support for network virtualization through configuration, reporting, monitoring and troubleshooting for VRFLite networks.
> More quickly and reliably utilize Cisco best practices using Cisco Smart Business Architecture (SBA) templates.
> LMS has Smart Services Interaction for contextual Technical Assistance Center (TAC) case creation and Cisco Support Community and it's interaction can Smartly tap into the Cisco Support Community knowledge base, streamline interactions with TAC.
> Cisco Prime LMS manages the deployment of the latest Cisco technologies and services such as medianet, Cisco TrustSec, and EnergyWise.
> A very crucial support for End-host manangement, including a separate IP Phone information.
> An integrated Inventory, software and configuration archive mechanism.
> Get immediate up-to-date information about the network through flexible reporting for inventory, user tracking, compliance, switch port usage, end-of-sale, PSIRT, and other critical areas.
> Easily manage all phases of the end-to-end lifecycle of Cisco value-added technologies and solutions, such as medianet, EnergyWise, TrustSec and Identity, Auto Smartports, and Smart Install.
A better comparison, if you are planning to get one, is ofcourse by using both of them. A evaluation Copy of Ciscoworks can anytime be downloaded from :
http://www.cisco.com/en/US/products/ps11200/index.html
Hope it helps!
-Thanks
Vinod
Maybe you are looking for
-
How to create the sub type field in hr abap infotype
hi , how to create the sub type field in hr abap infotype. regards, venkat.
-
Can the database cache be installed w/ 9ias http server only install
The 9ias 1.0.2.2 db cache is offered as an option only with the Enterprise install. This a 4.32 GB installation most of which I don't require like Forms, Reports, Discoverer etc. Is there a way for me to install just the 9ias http server and the db c
-
Error in attaching file in GOS
Hello Experts, while attaching the Attachments via GOS an error occurs as Database error for <insert into KPRO> <>. Please help for the same
-
Files with Flash Video Exporter
I have a .fla file which I would like to publish on the Web, either streaming or with progressive download. According to http://www.adobe.com/devnet/flash/articles/flv_exporter.html I have to convert this file to .flv Questions: 1. There is no step b
-
The correct approach to intercept TAB key
Dear Experts, I have developed a GUI out of javax.swing. The GUI consists of JFrame, several JPanels and javax components, such as JTextField, JLabel, JComboBox, JTable and many more. Now, I want to change the behavior when user presses TAB key. By d