Alerts in XI and CCMS

I've read some SAP doco talking about a CCMS Central Monitoring System (CEN).  
Does that mean having CCMS on it's own Server - and CCMS is monitoring all DEV, QAS and PRD systems.
What is the usual way if you have R/3, BW, XI.  Which box should have CCMS on it ?   Or should it have it's own instance seperated from the rest of them ??

Hi,
There will be a separate instance of CCMS installed which will do the central administartion for all the components in a landscape. It can be handled by one single administrator....can have many assistants. No need of having a separate instance of CCMS for R3, XI/ PI, etc...the only thing that you need to take of is how to integrate your system with CCMS for monitoring.
The CCMS alert monitoring infrastructure is provided by SAP free of cost.
For more info: http://www.sap.com/germany/media/mc_386/ccms_monitoring_brief.pdf
Also there is one good SAP article named "CCMS Integration With XI".
Regards,
Abhishek.

Similar Messages

  • Alert is finished, but ccms is still red

    Hallo,
    we had some alerts in  the ccms. Problems are corrected and all open alerts finished, but the ccms still red.
    How to restore to green status?

    Hi,
    You must complete the alerts in CCMS. Completing them in the Alert Inbox has no influence on the status of CCMS.
    Perhaps this is your issue? If this is the case then remember to complete all alerts of the relevant type. This should get your status back to green again for the chosen alert type.
    - remember that for any given date you will only see 1 alert at a time in CCMS. So that when u complete that alert more could be present. Using standard configuration CCMS is updated every 5 minutes...
    Hope it helps.
    Best Regards,
    Daniel
    Edited by: Daniel Engsig-Karup on Oct 30, 2008 8:44 PM

  • Relationship between Solution Manager Diagnostic and CCMS

    We are just now looking at Solution Manager Diagnostics and central monitoring in Solution Manager.  One thing we are not clear on, and haven't seen anything definitive on, is the relationship between these  and CCMS.
    Any insight or link to documentation would be greatly appreciated.
    Thanks!
    Jeff Henke

    Solution Manager Diagnostics is a diagnostic tool, not a real-time monitoring and alerting tool.  CCMS is for real-time monitoring and alerting, and SMD does in fact get data from your CCMS agents, as well as from saposcol and Wily Introscope.
    Hope that helps,
    David.

  • Send alerts from RWB to CCMS

    Hi
    I need to transfer alerts from RWB to CCMS. I user the MTE class SXI_RWBAlertCateg.
    In my development environment everything work fine, the ccms monitor displays the list of categories and the related alerts.
    In production the ccms monitor displays just a node with the category summary, without splitting on different categories.
    Any idea?
    Alessia

    Hi,
    Please check this stuff:
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
    /people/ginger.gatling/blog/2005/12/02/innovative-ways-to-use-alerts
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    /people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f2243d711d1893e0000e8323c4f/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/f2bbc8142c11d3b93a0000e8353423/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/5d/2166e6a91d11d188de0000e8216438/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/05/bb223905b61b0ae10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
    Regards,
    Wojciech

  • TPM and CCMS in RWB

    Hi,
    Please let me know what is TPM and CCMS in RWB.
    Please explain in detail their significance in RWB.
    Thank you all.
    Regards
    Bhanu.

    hi bhanu,
    SAP XI uses the monitoring infrastructure of SAP NetWeaver Application Server, such as the CCMS alert monitor and the alert framework. Monitoring can be accessed using the Runtime Workbench (RWB).
    The following tools are used by the Runtime Workbench :
    CCMS (Computing Center Management System)
    u2022     Monitoring and administration of SAP System Landscapes
    u2022     Configuration possible within Runtime Workbench
    TPM (Process Monitoring Infrastructure)
    u2022     Monitor and analyze integrated processes involving multiple components in distributed  system environments
    u2022     Display detailed information about processes, process flow, process steps and performance figures
    Alerting Framework
    u2022     Configuration of alerts to reflect the needs of specific processes
    u2022     Part of SAP Web AS
    The CCMS Monitor returns a status in the Runtime Workbench for every component.  The information is displayed by means of an icon, which can be red, yellow, green and gray (red for a problem, yellow for a warning, green for success and gray for undefined)
         The following are the capabilities of CCMS
    u2022     CCMS forms the core component of the Alert Framework.
    u2022     It is possible to monitor and administer SAP System Landscapes.
    u2022     Integration with Runtime Workbench alert is possible.
    u2022     CCMS configurations are global; hence itu2019s not required to set specific monitors for each interface.
    CCMS
    1) Transaction RZ20 is used for creating monitors in CCMS, select Extras --> Activate maintenance functions.
    2)Go to monitor (set) --> create, you will get to the following screen:in transaction RZ20 select extras --> activate maintenance functions.
    3)Go to monitor (set)--> create, you will get to the screen:
    4)click <<< new monitor>>> and select create nodes (F5) button from the toolbox icon.
    5)select rule node and hit the continue button.
    6)in the next dialog select CCMS_DEFINE_R_SYSTEMS as the rule definition and hit the continue button.
    7)Now select <CURRENT> from the match code for the R3 system parameter value and hit the continue button.
    Note: pls remember that we are creating a rule Based monitor: we need to make sure NO object checked from the selectable MTE tree.
    8) The next step is to create the virtual node to group all the MTEs that we should select from the MTE classes shown in point a. TO do this ,
    click on CCMS_DEFINE_R3_SYSTEMS if it is not already selected and hit create nodes (F5) button from the toolbox. now select
    virtual node and hit the continue button.
    9)in the name field write something like: test rule based monitors and hit the continue button.
    10) now click under test rule based monitors to select them and then hit on create nodes (F5)
    choose Rule based and hit continue button.
    11) On the next screen select CCMS_GET_MTE_BY_CLASS as the rule name and the hit the hit the continue button.
    12)Now we need to add each MTE class from point a. to tje following screen on the MTE class
    paramater value. select all of them and hit continue button.
    13) the next step is to include all MTE classes already defined in point a. you will need to repeat these steps for each
    additional class you want to add to the monitor set.
    14) After all classes has been included into the monitoring set hit the save button from the toolbox.
    15) you will be prompted for a monitor name , write something meaningful.
    The new Monitor set should be display
    Find the links
    http://help.sap.com/saphelp_nw04/helpdata/en/d4/cc823bd26a5c42e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/f6/d60b374e4e7c64e10000009b38f839/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e8/e7f0fb1a2511d294d200a0c930df15/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/9e9031c28d47b6e10000000a11466f/frameset.ht
    regards
    srinivas
    Edited by: sree on Sep 23, 2008 9:22 AM

  • When I tap a photo in my iPhone photo gallery, the photo appears but there is always a "this movie format not supported" alert and then the alert goes away and the photo appears. These are photos I've taken with the iPhone and aren't even movies.

    It's very odd. I take photos with my iPhone and then later go to view the photos in the Photo Gallery on my iPhone. The photos to appear, but I keep getting "this movie format not supported" alerts, even though I am looking at photos taken by my iPhone. The alert appears briefly just after the photo appears and then the alert goes away and I can see the photo. They are just still photos and not movies. Why wouldn't the iPhone recognize the format of photos it is taking?

    That thread helped for a time.  But now it seems as though my computer is back to slow again.  But, some of the jargon is over my head as well.  Not sure I knew quoite everything they were talking about.  But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again.  Thanks so much.

  • I m trying to send a email and sms alert using php and it works fine on all systems except on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india. plz help

    I m trying to send a email and sms alert to people and it works fine on all systems expect on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india.
    the code i m using is right below,plz have a look and not into the problem as problem is a bit strange.
    $headers = "MIME-Version: 1.0\n" ;
                $headers .= "Content-Type: text/plain; charset=\"UTF-8\"\n";
                $headers .= "X-Priority: 1 (Highest)\n";
                $headers .= "X-MSMail-Priority: High\n";
                $headers .= "Importance: High\n";
                // Additional headers
                $headers .= 'From: Rakesh <[email protected]>' . "\r\n";
                foreach($disemail as $email)
                    $to = $email;
                    $subject = $succMessage['email_subject'];
                    $message = $smsText;
                    mail($to,'=?UTF-8?B?'.base64_encode($subject).'?=',$message,$header);
            if (stripos($_SERVER['HTTP_USER_AGENT'], 'MSIE') !== FALSE) {
            $smsText = utf8_encode($smsText);

    i have tried this new charset combination specifically for iphone and i m waiting for response from sweden alliance.....i hope this works fine as iso works great for 8-bit characters.
    would like to have your thoughts though.
    $headers .= "Content-Type:text/plain; charset=\"iso-8859-1\"\n  format=flowed Content-Transfer-Encoding: quoted-printable";

  • XI content for SRM and CCM scenario - mapping

    Hi All,
    We are using the standard business content for integrating SRM with CCM to update contract information from SRM to CCM. Both SRM and CCM are on the same system.
    The configuration scenario used is MasterDataInclusionInCatalogOnWAS700 which is in the name space SAP CATALOG CONT.MGMT. 2.0_700 , http://sap.com/xi/CCM/CAT.
    There are 2 interfaces being referred by this scenario: CatalogUpdateNotification_Out and this CatalogUpdateNotification_In and both the interfaces are pointing to the same meesage type CatalogTransmission but they are in different name spaces.
    Once the scenario was configured there was no interface mapping available in the standard business content to map the above 2 interfaces.
    SAP SRM SERVER 5.5
    CatalogUpdateNotification_Out
    CatalogTransmission
    http://sap.com/xi/EBP
    SAP CATALOG CONT.MGMT. 2.0_700 ,
    CatalogUpdateNotification_In
    CatalogTransmission
    http://sap.com/xi/CCM/CAT
    Is this the normal case and we need to develop our own mapping or is the standard content not imported correctly?
    The service pack details are as follows:
    PI 7.0 SP level 14
    XI content
    u2022 SAP BASIS 7.00 - SP 14
    u2022 SAP CATALOG CONT.MGMT. 2.0_700 - SP 12
    u2022 SAP SRM SERVER 5.5 - SP 11
    u2022 SAP ABA 7.00 - SP 14
    Thanks,
    Shravan

    ditto, anybody received a response from SAP with regards to this problem?
    As suggested above, we could build our own mapping in XI but this would obviously be a modification to SAP standard which we would prefer to avoid.
    Regards, Kyle.
    OK Received a response from SAP dated Oct. 9, 2008
    I assume that you have installed NW 7.00 SP14 (or higher).
    Within earlier versions the mapping from XML to ABAP was to lax.
    The XML message was processed witout regarding the name of the root
    element. This was fixed with SP14.
    When you call an interface the XML message must match with the type
    defined in the WSDL used for proxy generation.
    Either the message or the WSDL used to generate the proxy seems to be
    wrong here.
    Here is a work around should solve this problem until we make available in a standard note soon.
    I will do it internally to our development team but I am sorry that i can not tell now when the note will be ready.
    Disable the new check by adding the following entry in transaction sproxset
    -Name: ST_USE_LAX_ON
    -Value: X
    -User: <empty>
    -Inactive: <empty>
    Edited by: Kyle Freeman on Oct 9, 2008 5:54 PM

  • Alert Monitor Threshold and Information, Warning and Alerts

    Hi,
    I defined a Forecast Alert Profile that is supposed to display the MAPE Alert in the Alert Monitor when the MAPE for the said selection is > x %. This x as I understand is maintained in the Diagnosis group of the Master Forecast Profile.
    I now try to make use of this Threshold Value Description "Variance is > %. and define  >(x-10) % but less than x % as information, x % as warning and >(x +20) as error but I am unable to make out how the alerts are determined and whether these values are indeed read (threshold >)
    Secondly my Alert may have been originally based on particular selection(s)- some in FG, some in BG. Some of these selections may not be assigned to the Alert Profile and the Planner may not remember at what level the forecast was carried out to begin with. So my query is at what level of selection is the Alert generated when there is no selection assigned to the Alert Profile ?
    Thanks
    Amit

    Hi,  I was hoping someone answers. It was not a profound question I believe
    I am also curious to know the same with respect SDP Macro based alerts. When a Macro Alert is triggered at Cell Val > y % and it is called a "warning" per the macro definition, of what good is the information, warning and alert threshold values in the Alert Monitor ?
    Does it mean the value 'Y' that I defined in macro step as 'threshold' for alert or process message can be more 'freely' defined in the alert monitor with three distinct values ? I tried testing but I am unable to conclude.
    Please help me understand
    Thanks
    Amit

  • An alert pops up and asks if I want to merge my contacts with Yahoo. If I merge, will it add duplicates?

    An alert pops up and asks if I want to merge my contacts with Yahoo.
    If I merge, will it add duplicates, if there are some?
    I don't want duplicates.
    If it will add duplicates, how do I tell yahoo to quit asking me if I want to merge.

    *Firefox 4 versions and later do not run on a PowerPC Mac.
    *Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/5.0/system-requirements/
    For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    * http://code.google.com/p/tenfourfox/
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • Regarding alerts in Spreadsheet and Listview components

    Hi,
    Is there any way to have alerts on Spreadsheet and Listview components (in Xcelcius) as we have on tables in WebI reports?
    If not possible on above mentioned components than are there any other components (tabular format) on which such alert is possible?
    Thank u

    Hi,
    in Xcelsius SP3 SAP implemented a component for that named "Scorecard":
    [/people/ryan.goodman2/blog/2009/12/15/top-xcelsius-2008-sp3-enhancements|/people/ryan.goodman2/blog/2009/12/15/top-xcelsius-2008-sp3-enhancements]
    There is also a very simple add-on nammed Xscorecard:
    [http://xcomponents.blogspot.com/|http://xcomponents.blogspot.com/]
    Regards
    Victor

  • Event ID 36888 - Schannel - A fatal alert was generated and sent to the remote endpoint.

    Exchange 2013:  2 x multi-role in one DAG - on-premise
    Performing remote mailbox migration using internet (*non-exchange web-based  tool*), to ship data from cloud Ex2010 server to Ex013 on-premise.
    Have multiple failures when doing the mailbox data copy - my migration tool error code tells me that:
    This error indicates that we were unable to authenticate to the source or destination mailbox and retrieve a list of folders when given 15
    minutes to complete these operations. This may be because the source or destination is unusually slow, has a very large number of folders, or due to "hanging" networking calls.
    Some mailboxes are copying, but around 80% are not.  Checked all permissions and other factors.
    I see in the System event log the following below:
    Log Name:      System
    Source:        Schannel
    Date:          9/14/2013 2:14:53 PM
    Event ID:      36888
    Task Category: None
    Level:         Error
    Keywords:      
    User:          SYSTEM
    Computer:      server.domain.local
    Description:
    A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
        <EventID>36888</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2013-09-14T20:14:53.699840000Z" />
        <EventRecordID>135625</EventRecordID>
        <Correlation />
        <Execution ProcessID="544" ThreadID="17928" />
        <Channel>System</Channel>
        <Computer>server.domain.local</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="AlertDesc">10</Data>
        <Data Name="ErrorState">1203</Data>
      </EventData>
    </Event>
    Anyone seen this? - not much recording this error available for Ex2013.

    Hello,
    Thank you for your post.
    This is a quick note to let you know that we are performing research on this issue.
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support
    Hi Simon
    I opened a SEV B case  today.  Appears to directly reflect the amount of load i put through, in terms of data being shipped with our migration tool.  That tool is basically logging into each mailbox using a superuser account and populating
    it with mail and calendar data form a source cloud mailbox.  No fancy co-existence or online move requests.
    All throttle policies are removed.  Attempting to migrate more than 20 mailboxes at a time results in the System Event log being filled with the Schannel error above.  Reducing the amount below this still shows the errors appearing, but not enough
    to stop mailbox data being shipped and the migration tool suffering a stop error.
    I will update the thread tomorrow when i speak with the engineer.  Surprised noone has had any input so far.
    I have the same problem, here is some data. I have two exchange profiles and the 2nd one stops logging in after this error starts. I have to reset the wireless connection and restart outlook to clear the situation.
    Dave Ladouceur

  • Performance of DSWP and CCMS settings

    Dear All
    We have Solman SP14, connected around 50 systems for EWA and CCMS and trying to add more systems to it.
    But the problem is when we execute the T-Code DSWP it is taking very long time  nearly takes 10Min to get the setup monitoring screen, checked all relevant areas Oracle, memory etc.... but no clue can anybody help us out to improve the performance.
    Thanks in advance
    Regards
    Subbarao

    Hi,
    I had a similar issue for one of my customers. The solution was easy: Instead of one big Solution Landscape with all monitored systems and all EWA, we splitted it into smaller landscapes. How do you split depends on your requirements. You could for instance create a llandscape with all production systems, ...
    Also, maybe you can delete/archive som old EWA.
    Regards,
    Holger

  • Finder totally broken. Just spits out the alert sound over and over

    Some times Finder works, and some times it doesn't. If I'm lucky and it works at start up, with in an hour or two it's back to not working.
    When it doesn't work, Finder just spits out the alert sound over and over non-stop, and some times also spits out another type of sound at the same time, even with the keyboard unplugged.
    I also can't use the drop-down options, move files, or change settings that require a password. When trying to type, you get one or two letters in, and it then quickly closes.
    It just suddenly started doing this.

    SYSTEM LOG QUERIES ▹ All Messages
    1/16/15 10:47:22.846 AM Finder[201]: *** remoteObjectProxyWithErrorHandler failed: Error Domain=NSCocoaErrorDomain Code=4097 "Couldn’t communicate with a helper application." (connection to service named com.apple.internetaccounts) UserInfo=0x600000c62240 {NSDebugDescription=connection to service named com.apple.internetaccounts}; {
        NSDebugDescription = "connection to service named com.apple.internetaccounts";
    1/16/15 10:47:46.670 AM loginwindow[65]: ERROR | -[SessionLogoutManager quitFinder] | Finder is killable, calling SMJobRemove
    1/16/15 10:48:56.229 AM com.apple.xpc.launchd[1]: (com.apple.Finder) ThrottleInterval set to zero. You're not that important. Ignoring.
    1/16/15 10:48:58.805 AM Finder[201]: assertion failed: 14B25: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
    1/16/15 12:06:12.981 PM Finder[201]: CGContextDrawImage: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context  and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
    1/16/15 12:06:12.983 PM Finder[201]: CGContextRestoreGState: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context  and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
    1/16/15 12:06:12.984 PM Finder[201]: CGContextRestoreGState: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context  and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
    1/16/15 12:16:37.023 PM Finder[201]: CGContextScaleCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context  and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
    1/16/15 12:16:37.025 PM Finder[201]: CGContextSetFillColorWithColor: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context  and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
    1/16/15 12:16:37.026 PM Finder[201]: CGContextSetStrokeColorWithColor: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context  and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
    1/16/15 12:16:37.027 PM Finder[201]: CGContextGetCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context  and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
    1/16/15 12:16:37.029 PM Finder[201]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context  and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
    1/16/15 12:16:37.031 PM Finder[201]: CGContextSaveGState: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context  and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
    1/16/15 12:16:37.032 PM Finder[201]: CGContextConcatCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context  and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
    1/16/15 12:16:37.034 PM Finder[201]: CGContextSaveGState: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context  and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update.
    There's a total of 77 CGContext errors. If you want me to, I'll post them all, but I think only the CGContext name is different on them all, and I think I got one of each CGContext error. 'Overall degradation of system stability and reliability.' It sure has that right!!!!
    1/16/15 12:29:09.558 PM Finder[201]: Layout still needs update after calling -[TListScrollView layout].  TListScrollView or one of its superclasses may have overridden -layout without calling super. Or, something may have dirtied layout in the middle of updating it.  Both are programming errors in Cocoa Autolayout.  The former is pretty likely to arise if some pre-Cocoa Autolayout class had a method called layout, but it should be fixed.
    1/16/15 12:45:49.554 PM WindowServer[117]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    1/16/15 12:45:50.278 PM WindowServer[117]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.72 seconds (server forcibly re-enabled them after 1.00 seconds)
    1/16/15 1:52:27.790 PM WindowServer[117]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    1/16/15 1:52:27.848 PM WindowServer[117]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.06 seconds (server forcibly re-enabled them after 1.00 seconds)
    User Diagnostic Reports...
    This is just one of each type of error. There's a lot of
    Finder[201]: com.apple.message.domain: com.apple.coregraphics.context.invalid
    errors for example. With the SenderMachUUID lines removed.
    1/15/15 9:57:00.559 PM Finder[209]: OSActivityID: 0x0000000dfffffffe
    com.apple.message.domain: com.apple.AddressBook.accounts.summary
    com.apple.message.summarize: YES
    com.apple.message.carddav_accounts: 0
    com.apple.message.disabled_accounts: 1
    com.apple.message.enabled_accounts: 1
    com.apple.message.exchange_accounts: 0
    com.apple.message.ldap_accounts: 0
    com.apple.message.total_accounts: 3
    1/16/15 10:47:22.609 AM Finder[201]: OSActivityID: 0x00000017000000b6
    com.apple.message.domain: com.apple.AddressBook.accounts.providers
    com.apple.message.signature: com.apple.icloud.iaplugin
    com.apple.message.summarize: YES
    com.apple.message.num_accounts: 1
    1/16/15 12:05:14.380 AM ReportCrash[783]: com.apple.message.domain: com.apple.crashreporter.writereport.crash
    com.apple.message.signature: Finder
    com.apple.message.signature2: com.apple.finder ||| 10.10.1 (10.10.1)
    com.apple.message.signature3: 8E93ECBDE41620E7C47A27B67ABDD1B2
    com.apple.message.result: YES
    com.apple.message.summarize: YES
    1/16/15 12:17:15.665 PM Finder[201]: com.apple.message.domain: com.apple.coregraphics.context.invalid
    com.apple.message.context-pointer: 0x0
    com.apple.message.calling-function: CGContextRestoreGState
    com.apple.message.process: Finder
    com.apple.message.bundle.id: com.apple.finder
    com.apple.message.bundle.version: 10.10.1 (10.10.1)
    com.apple.message.backtrace:  0    CoreUI                              CUIRenderer::Draw(CGRect, CGContext*, __CFDictionary const*, __CFDictionary const**) + 2536
    1    CoreUI                              CUIDraw + 205
    2    AppKit                              __44-[NSAppearance _drawInRect:context:options:]_block_invoke + 64
    3    AppKit                              -[NSCompositeAppearance _callCoreUIWithBlock:] + 183
    4    AppKit                              -[NSAppearance _drawInRect:context:options:] + 127
    5    AppKit                              __NSRenderSpinningIndeterminateIndicator + 1222
    6    AppKit                              -[NSProgressIndicator _setupSurfaceAndStartSpinning:] + 884
    7    AppKit                              -[NSProgressIndicator startAnimation:] + 259
    8    AppKit                              -[NSProgressIndicator _windowOcclusionChanged:] + 132
    9    CoreFoundation                      __CFNOTIFICATIONCENTER_IS_CALLING_OUT_TO_AN_OBSERVER__ + 12
    10    CoreFoundation                      _CFXNotificationPost + 3140
    11    Foundation                          -[NSNotificationCenter postNotificationName:object:userInfo:] + 66
    12    CoreGraphics                        CGSConnectionNotifier::invoke_callbacks(unsigned int, void*, unsigned long) const + 577
    13    CoreGraphics                        (anonymous namespace)::notify_datagram_handler(unsigned int, CGSDatagramType, void*, unsigned long, void*) + 103
    14    CoreGraphics                        CGSDatagramReadStream::dispatch_next_main_queue_datagram() + 280
    15    CoreGraphics                        CGSDatagramReadStream::dispatch_next_datagram() + 42
    16    CoreGraphics                        CGSDatagramReadStream::dispatch_datagrams() + 50
    17    CoreGraphics                        invocation function for block in CGSDatagramReadStream::dispatch_datagrams_async(dispatch_queue_s*, CGSDatagramReadStream*) + 18
    18    libdispatch.dylib                   _dispatch_call_block_and_release + 12
    19    libdispatch.dylib                   _dispatch_client_callout + 8
    20    libdispatch.dylib                   _dispatch_main_queue_callback_4CF + 861
    21    CoreFoundation                      __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__ + 9
    22    CoreFoundation                      __CFRunLoopRun + 2159
    23    CoreFoundation                      CFRunLoopRunSpecific + 296
    24    HIToolbox                           RunCurrentEventLoopInMode + 235
    25    HIToolbox                           ReceiveNextEventCommon + 431
    26    HIToolbox                           _BlockUntilNextEventMatchingListInModeWithFilter + 71
    27    AppKit                              _DPSNextEvent + 964
    28    AppKit                              -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 194
    29    AppKit                              -[NSApplication run] + 594
    30    AppKit                              NSApplicationMain + 1832
    31    Finder                              <base> + 22880
    1/16/15 8:54:31.424 PM diagnostics_agent[275]: com.apple.message.domain: com.apple.usage.app_activetime
    com.apple.message.signature: Finder
    com.apple.message.signature2: com.apple.finder ||| 10.10.1 (10.10.1)
    com.apple.message.value: 1827
    com.apple.message.value2: 22
    com.apple.message.value3: 0
    com.apple.message.value4: 0
    com.apple.message.value5: 2
    com.apple.message.value6: 1
    com.apple.message.value7: 201
    com.apple.message.result: YES
    com.apple.message.summarize: YES
    Next time I get the error, I'll then do this again, so I can pinpoint what ones are done when it starts, and what ones are created when I go to sleep and awake to 'fix' Finder.

  • When will the bluetooth support audio alerts for email and text messages?

    When will the bluetooth support audio alerts for email and text messages? It works when I get a phone call, but I'd like it to work when getting a text message (I do this a lot in noisier areas and would rather not have to look at the phone every few minutes)
    Or is there a configuration option I'm missing?

    Answered in this thread:
    http://forums.adobe.com/thread/1393642?tstart=0

Maybe you are looking for