Alerts--network magic pro

I'm receiving "alerts" regarding antivirus & antispyware not installed on PC, when MS Security Essentials is-why

kcbear wrote:
Am evaluating programs features and feasibility....looks good. BUT got several alerts for firewall, antivirus, antispyware and Win7 automatic updates. KIS2011 has a firewall, antivirus and antispyware features that are turned on and working. Does the program not recognize KIS2011? Also have Windows Update set to alert me but not auto d/l and am getting that alert. I figured how to turn these alerts off but why no recognition of KIS even though Win7 Action Center acknowledges KIS's firewall,antivirus and antispyware are turned on!!
Hi kcbear ,
Choose to Fix Alert and then Ignore the Alert. Network Magic is not being Supported as far as New Versions go.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Similar Messages

  • Network Magic Pro 5.5 incorrectly identifies my HTC Android phone as a Win7 PC

    Your Network Magic Version installed: 5,5,9195,0-Pure0
    The type of connection to the Internet, like DSL
    The Brand of Modem and its Model Number the router is connected to. SpeedTouch546T2 (set up as a bridge)
    The Brand, Model, Hardware Revision of your Router and include the Firmware Version: Linksys WRT610Nv2 Firmware 2.00.00 B05 
    The Method of connection your problem computer has to the Router: Wireless.
    The Connection in use on the problem computer: HTC Desire onBoard WiFi device
    Operating system and version and Service Pack Level, if any. Android 2.1 
    Software Firewall in use: Windows 7
    Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. MS Security Essentials
    Include your location in the post or fill out your Profile for this forum and include the location. Norway
    I have a variety of devices on my home network, such as 1 MAC, 5 Win 7 PCs, 4 Android mobile phones, 1 TV PVR, 1 BluRay Player, 1 TV, 2 Network Printers, 1 iPod Touch. All of them is appearing as the should except one of the mobile phones. It is being recognized as a Win 7 PC and I can not change the type to anything but a PC/Mac. I have tried changing the IP address and also completely resetting the network but to no avail. Network Magic also gives my Android phone (HTC Desire) the name of one of the connected Win 7 PC's. The IP address and MAC address recognized by Network Magic is the ones associated with the phone, not the PC. The PC is a laptop with both wired and wireless connection, but it doesn't help if I disable on or the other or both. I have also completely reinstalled Network Magic on the PC but the problem persists.
    In addition to being annoying, the problem also prevents me from administrating a NetGear access point as it only accepts to be managed by the computer Network Magic is associating with my Androd phone. To work around that issue I hope I can do a factory reset on the access point and reconfigure it, but I'm not looking forward to it. I have bought Network magic Pro as my network management sw and would like to use it for that purpose.
    Please anyone - HELP!

    Dang! It's been a year since this was posted and nobody is able to HELP...
    Anyway, I have the same problem here too... My Verizon Motorola Droid A855 is identifies as computer and Microsoft Windows 7 (workstation). I can't get the other options to categorize it as a cellphone. The thing is my Panasonic DMP-BD60 Blu-Ray DVD Player appears on the network map and I was able to put it under "Media Adapter," another pc appears  as it should, a Hawking Wireless-G Range Extender as "Wireless Access Point," and a BoostMobile Motorola i1 Android cellphone appears as a "cellphone." So, how come my Motorola DROID A855 is detailed as under my pc name and operating system Windows & Professional? This is weird.
    Anybody has an answer?
    Fiat lux

  • Is it legal to ban the use of Network Magic Pro for registered users

    Hi 
    I have a question ... Is it legal to ban the use of Network Magic Pro for registered users
    Cisco would he have to propose a solution : patch, reg file or other solution
    Because it's certainly enough to modify one or more files to make Network Magic Pro registered ...
    Regards.
    Daniel

    Hi Daniel,
    I'm not sure if it's still possible to create a solution to it. I believe Cisco and Pure Networks (Network Magic) has ended their partnership since last year.

  • Cannot uninstall Network Magic Pro Free Trial

    My free trial is over and I cannot uninstall Network Magic Pro.
    It is not in the list of the Add/Remove Programs.
    I'm running XP Pro.

    PSYCHSON wrote:
    My free trial is over and I cannot uninstall Network Magic Pro.
    It is not in the list of the Add/Remove Programs.
    I'm running XP Pro.
    Hi PSYCHSON,
    Rerun the Installation program for Network Magic. It should give you options for Repair or Remove.
    If it does not, then simply reinstall overtop the existing installation. Reboot and go back to Add or Remove Programs and remove it.
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

  • Vonage Adapter on Network Magic Pro goes offline for no reason

    1. Network Magic version: 5.5.9195.0-Pure0
    2. Internet connection via Texas Communications in Bryan, Texas which is line of sight tower transmission to the dish receiver
    (modem) on my home. http://www.tconline.net/default.htm
    3. Texas Communications Modem - Motorola Canopy (Motorola Wireless Broadband Platform)
    4. D-Link Router DIR-615, Hardware version B2, Firmware 2.25
    5. Problem device is Vonage Voice over IP box (Vonage V-Portal Digital Phone Adapter) wired to the router.
    6. Computer uses Windows XP Home Edition with sp3.
    7. AVG version 10.0.1204 Anti-Virus Free Edition 2011
    8. Windows firewall.
    The problem occurs when the Vonage adapter drops offline (according to Network Magic Pro) for some unknown reason. The icon for  Vonage dims in the NMP map but the Vonage phone continues to work at a degraded level (about every 2nd or 3rd word spoken is not received).
    I've tried port forwarding the Vonage adapter but this doesn't keep the adapter online.
    Once the Vonage adapter drops offline the only way I've found to correct the problem is to delete the adapter from NMP then
    re-install it again. There doesn't seem to be a way to wake up the adapter once offline. I can reboot my network computers and this doesn't affect the Vonage adapter.
    Help!

    You have to do a little better than that.
    Printer?
    current drivers?
    Network? wireless? or bad USB cable?
    1st I've read here.

  • How to can it be done install Network Magic Pro on Archons 101 Tablet

    Hello; I am very happily to ba adding a Archons 101 KGB Android Tablet to my home
    network  Network is Verizon router#7500,Norton 2011 INS Security,Network Magic Pro v.5.5.91950, HP Computer
    Window 7, Gateway Window XP, So can and How do I do install product.
    cowan

    Yes, you can add your tablet pc to your network.  If you have the setup CD for Network Magic, you can follow the instructions here to install the software. 
    Once you are finished installing Network Magic, read this article to learn how to add a device to your network using Network Magic.
    Hope this helps. 

  • What is the latest version of Network Magic Pro?

      I've been all over this site and still can't get the simple answer. The updater in Magic can't be trusted. You would think the  latest version number would be easy to find.

    Current version of NM is 5.1, you can download it from www.purenetworks.com/download/
    My Cisco Network Magic Configuration:
    Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
    Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
    Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
    Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
    Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

  • Network Magic Pro 5.5 keeps dropping my router and wireless printer ...

    ...multiple times per day.
    WIN 7 Pro 64-bit, SP1
    Network Magic 5.5.9195.0-Pure0
    Motorola Surfboard  model SB6120 Cable modem
    Windows Firewall configured by Norton Security Suite 6.2.1.5
    Linksys WRT54G2 router ver.1
    My problem is as stated in the header.  My router needs to have the power cycled multiple times a day because it is dropping my internet access.  This problem did not occur until I purchased in installed Network Magic.  Also, the wireless printer needs to have the cycle powered almost as often.  I've had both the router and wireless printer for more than 2 years and never experienced this problem before installing Network Magic
    I manually changed my MTU setting to 1472 from Automatic.  This has not helped.
    Any other suggestions?
    Thanks!

    From what I know, the network magic software won't affect your internet connection since it is just  a software to use to manage your network. You may want to isolate the problem first. You can try uninstalling the network magic software from your computers and try to observe your connection again.

  • How to remove the "Index Page" option from the Router in Network Magic Pro 5.5.9195

    I find it ironic and I can click on my router in the Map view of network magic, and the last option is "Index Page".  This immediately loads my router setup in a browser window. It completely bypasses the router login and password.  I do not want anyone to be able to start my PC, open Network Magic, and click this option and have access to my router.  This is stupid.  How do you turn this option off, remove it, or hide it?
    Yes, I know, I could put a password on my PC, but I share it, with other family members, and at this time I don't have user accounts setup for them.  
    I am looking for a solution in Network Magic, not my OS.
    Thanks,
    Brian

    Anything you do without submitting to form has to be done on the client side (ususally by JavaScript) using data which has been send already from the server.
    With JavaScript you can do quite a bit. You can download tables which don't necessarilly appear on the screen, loading them into JavaScript arrays by dynamically generating javascript. Then you can pick up events like drop-box selection and use these tables to chose what you do next (e.g. preloading other fields, setting drop box content etc.).
    Or, you can cause forms to be submitted when actions like a selection happen without the user clicking a button. It's generally a matter of how much data you'd need to transmit.
    Another posibility is to use a Java applet, which can generate requests to the server and handle the results as it chooses. That are a number of problems with that but occasionally it's the best solution.
    What you can't do is to handle user input inside a JSP. The JSP has come and gone before the user even gets to see your form.

  • Desktop Screenshots falsely says subject computer is not running Network Magic 5.0 or later

    When I try to Take Desktop Screenshots, Network Magic Pro says the subject computer is not running Network Magic 5.0 or later, but both are running Network Magic Pro Version 5.5.9195.0-Pure0.
    I can view details and alerts on each computer from the other in NM.
    Both PCs are Windows 7 64-bit, mine is Pro SP1, other is Home Premium SP1. Both are on same Cisco Linksys E4200 router.
    Take Desktop Screenshots of the other does not work from either computer.
    1. Your Network Magic Version installed: Network Magic Pro 5.5.9195.0-Pure0.
    2. The type of connection to the Internet: Cable
    3. The Brand of Modem and its Model Number the router is connected to:
        Ambit Broadband Cable Modem Model# U10C018
    4. The Brand, Model, Hardware Revision of your Router and include the Firmware Version:
        Cisco Linksys E4200, No H/W Rev., Firmware Version: 1.0.01 build 10  Feb 21, 2011
    5. The Method of connection your problem computer has to the Router: Wired (currently) and Wireless.
    6. The Connection in use on the problem computer: Realtek PCIe GBE Family Controller - Wired
        Screenshot subject computer is Wireless 802.11n.
    7. Operating system and version and Service Pack Level, if any: Windows 7 Professional x64 Service Pack 1 on Intel i7.
    8. Software Firewall in use: AVG Internet Security 2011 Version 10.0.1375
    9. Anti-Virus Program and Spyware Program: AVG Internet Security 2011 Version 10.0.1375 and
        SuperAntSpyware Version 4.53.1000
    Fred Cone

    When I try to Take Desktop Screenshots, Network Magic Pro says the subject computer is not running Network Magic 5.0 or later, but both are running Network Magic Pro Version 5.5.9195.0-Pure0.
    I can view details and alerts on each computer from the other in NM.
    Both PCs are Windows 7 64-bit, mine is Pro SP1, other is Home Premium SP1. Both are on same Cisco Linksys E4200 router.
    Take Desktop Screenshots of the other does not work from either computer.
    1. Your Network Magic Version installed: Network Magic Pro 5.5.9195.0-Pure0.
    2. The type of connection to the Internet: Cable
    3. The Brand of Modem and its Model Number the router is connected to:
        Ambit Broadband Cable Modem Model# U10C018
    4. The Brand, Model, Hardware Revision of your Router and include the Firmware Version:
        Cisco Linksys E4200, No H/W Rev., Firmware Version: 1.0.01 build 10  Feb 21, 2011
    5. The Method of connection your problem computer has to the Router: Wired (currently) and Wireless.
    6. The Connection in use on the problem computer: Realtek PCIe GBE Family Controller - Wired
        Screenshot subject computer is Wireless 802.11n.
    7. Operating system and version and Service Pack Level, if any: Windows 7 Professional x64 Service Pack 1 on Intel i7.
    8. Software Firewall in use: AVG Internet Security 2011 Version 10.0.1375
    9. Anti-Virus Program and Spyware Program: AVG Internet Security 2011 Version 10.0.1375 and
        SuperAntSpyware Version 4.53.1000
    Fred Cone

  • Old computer not working with Network Magic

    Hi I am having issues activating my license for Newtwork Magic on one of my home computers the desktop.  I am using  Network Magic Pro Ver. 5.1.9005.0-Pure 0 There are a total of 3 computers on the network.  2 are Dell Laptops with Home Vista.  The third computer is a Dell desktop Precision 330. The desktop is running Windows XP Pro, Ver 2002 SP3, Pentium 4 1800MHZ.  I have  cable internet, Surfboard modem, a D-link router DIR-655.  The desktop has a D-Link DWA-552 XtremeN adapter.
    I have installed and un-install Network Magic 4 times but I still recieve the same message and yes i ran a clean disk, manually deleted files and restarted the computer everytime. The message I am receiving is: "The Licensing server could not be contacted.  Please make sure you have internet connection and try again."
    I am at this time using the desktop to send this message so yes I am connected to the internet but Network Magic is not acknowledging the connection. On my computer,  a laptop, Network Magic indicates  the desktop is on the network but a alert states that Network Magic is not installed.
    Thank you 

    Basics from the User Guide are restart, reset, restore from backup, restore as new device.  Have you gone through ALL these steps?  What exactly HAVE you done to troubleshoot your issue?

  • Network Magic or Home Network Defender is Blocking Uploads

    I removed my primary hard drive and installed a new, faster larger one.  When I installed Network Magic I have been getting some significant problems:
    1.  Speed test shows 0 Kbps upload speed and the gauge shows nothing uploaded on the Network Magic Speed Test
    2.  I can NOT upload my videos to my external video publishing site - the Vimeo uploader is erroring out and crashing.  When I try the browser tool, I am getting an error that says I can not upload the file.
    I did not have this problem before I reinstalled Network Magic.  My other computers do not have this problem.
    I am using:
    Network Magic Pro Version 5.5.9195.0-pure0
    The OS on this computer is Vista Ultimate Service Pack 2
    The internet connection is CABLE via Atlantic Broadband
    The Router is a Linksys WRT610Nv2  Fireware 2.00.00 B05
    The computer's virus software is NETSAFE Security Suite from Altantic Broadband - Firewall is NOT active. ( this is different than my other computer that is on the network, and it different than my prior installation configuration on my old hard drive - it used McAfee.

    I removed my primary hard drive and installed a new, faster larger one.  When I installed Network Magic I have been getting some significant problems:
    1.  Speed test shows 0 Kbps upload speed and the gauge shows nothing uploaded on the Network Magic Speed Test
    2.  I can NOT upload my videos to my external video publishing site - the Vimeo uploader is erroring out and crashing.  When I try the browser tool, I am getting an error that says I can not upload the file.
    I did not have this problem before I reinstalled Network Magic.  My other computers do not have this problem.
    I am using:
    Network Magic Pro Version 5.5.9195.0-pure0
    The OS on this computer is Vista Ultimate Service Pack 2
    The internet connection is CABLE via Atlantic Broadband
    The Router is a Linksys WRT610Nv2  Fireware 2.00.00 B05
    The computer's virus software is NETSAFE Security Suite from Altantic Broadband - Firewall is NOT active. ( this is different than my other computer that is on the network, and it different than my prior installation configuration on my old hard drive - it used McAfee.

  • AVG Not Recognized on Network Magic --Red Alert

    How do I correct the red alert on Network Magic which says I have no antivirus installed when I just put on the new version of AVG?  Now I have got Avast on the desktop and installed a new version with no red alert about it.  Is AVG not a good antivirus?  (Yes, I decided to try it on the laptop while keeping Avast on the desktop.  Just wanted to see if there was any difference.)  Will I need to uninstall AVG and put Avast on the laptop to keep this alert from being there?  Thanks for any help!  Susan

    Network Magic is still being sold but Cisco is providing no support for it.  I am still finding new uses for it in mapping and checking out my fairly complex home network.  If it was updated and given some bug fixes it would be nice, and make me feel a lot better about Cisco.  But because they've abandoned it and also the WRT610N router, I have finally stopped buying new Cisco products.  While my 610N has buggy (IMHO) firmware, and always runs very hot due to poor ventilation, and has poor range since it no longer has external antennas like earlier models.  I'd love the performance of the latest models but I won't take the chance.
    (Mod note: Edited for forums compliance.)

  • Network Magic Alerts

    What's the chance Network Magic will recognize Norton Internet Security, 2010 and stop making me turn off 9 false alarms on the 3 PCs in my home network?
    (Mod note: Edited for guideline compliance.)

    [email protected] wrote:
    What's the chance Network Magic will recognize Norton Internet Security, 2010 and stop making me turn off 9 false alarms on the 3 PCs in my home network?
    (Mod note: Edited for guideline compliance.)
    Hi,
    None. Ignore the Alerts. Network Magic is no longer being updated.
    (Mod note: Post has been edited. Please stay on topic.)
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

  • Work Laptop with Corporate Image and Network Magic 5.5 Pro

    I am unable to print from her vpn because when Network Magic installed and I was able to discover the printer at home, which is setup for network sharing across my house, it went into the registry of her laptop and saw it as a network printer, but since it is not located on her Work Network, it will not print her documents from VPN.  Outside of VPN, can print wirelessly without any issues.  I have all pass throughs setup on the Router For VPN and I figure its a corporate image issue.  She has rights to install local printers to her laptop, however, the printer I have, and the way they have the USB configured on her laptop, it will not install the device when the USB is plug in, to install locally, hence the network setup.  I have a LexMark X4530 all in one and when I plug into her USB Connection, the Laptop comes back with an error that does not recognize the USB.

    jeffreywerner wrote:
    I am unable to print from her vpn because when Network Magic installed and I was able to discover the printer at home, which is setup for network sharing across my house, it went into the registry of her laptop and saw it as a network printer, but since it is not located on her Work Network, it will not print her documents from VPN.  Outside of VPN, can print wirelessly without any issues.  I have all pass throughs setup on the Router For VPN and I figure its a corporate image issue.  She has rights to install local printers to her laptop, however, the printer I have, and the way they have the USB configured on her laptop, it will not install the device when the USB is plug in, to install locally, hence the network setup.  I have a LexMark X4530 all in one and when I plug into her USB Connection, the Laptop comes back with an error that does not recognize the USB.
    Hi jeffreywerner,
    VPN? Is your Lexmark X4530, a Wireless Printer? Her Laptop may have rights to install an USB Printer, but if the Printer has a USB 2.0 High-Speed Port and the Laptop doesn't support USB 2.0, then you / she isn't going to be able to install that printer on that Laptop.
    But the workaround, is to use a Print Server or buy a new Wireless Printer.
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Maybe you are looking for