Alerts not getting triggered from Adapter Framework

Hi,
I have done the following steps for the Alerting:-
1. In configuration of RWB, activated monitoring for XI integration server & XIAdapterFramework and set the monitoring level to 'HIGH'.
2. Scheduled the Report 'SXMSALERT_PROCESS_DATA_GET' on ABAP stack.
3. In the 'further settings' link in End-to-End monitoring, activated the monitoring and set the frequency.
4.Created an alert category using t-code 'ALRTCATDEF' and assigned fixed users(myself) to it.
5.Defined an alert rule with '*' in all conditions and 'No restrictions' for the question 'Where did the error occur'.
Finally after all the steps:-
I am able to receive the alerts in the inbox -
  a) by running the test report 'RSALERTTEST'
  b) from a control step in BPM.
<b>However, alerts are not getting triggered for an error in the Adapter Framework. (an exception in the Adapter Channel)</b>
When i debugged the SXMSALERT_PROCESS_DATA_GET report, there was step where it was looking for process instances in table 'SSPICSPRHD' which was empty and the alert error log said -
<i> No process instances found for process type ID: 26460B43EB934C4C9ABBE9627380A89E ( XIDomain: domain.00.hqdvsapxi01 )</i>
Any help/hint is welcome !!!
Thanks & Regards,
Renjith.

Hi,
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1382. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
I think this blog will be of help to you..
Cheers,
Divya

Similar Messages

  • Mail not getting triggerred from Alerts in PI 7.1

    Dear Freinds,
    We have created alert categories and based on that created numbers of alert rules. Alerts are getting triggered and we recieve them in the Alert Inbox. We have also maintained user id's in Fixed Reciepents. But we want the same to go to email based on the user profile.
    Please let us know what has to be done in order to recieve email as soon as alerts are getting triggered.
    Thanks & Regards
    John

    Hi Kroninjer,
    To send an EMAIL, assign an EMAIL ID to the corresponding user in the transaction SU01 and then set up SCOT and you can send emails when the ALERT is triggered..
    Once you have configure Alerts, you will get the Alerts into ALERT INBOX in RWB of the user. To also get the email, the following needs to be done,
    1. In SU01 -- Assign the Email ID for the Recipient of the ALERT.
    2. In , RWB>ALERT INBOX> PERSONALIZATION--> Time Independent Delivery and Email are selected.
    3. Finally, SCOT needs to be set up to send Emails. Check this for the same. You can ask your BASIS team to do this step.
    http://help.sap.com/saphelp_nw04/helpdata/en/23/1edf098ea211d2b47300609419ed29/frameset.htm
    Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
    4) Notes:
    750287 XI 3.0 Runtime Workbench: Alert configuration does not start
    768456 Troubleshooting Runtime Workbench XI 3.0
    813703 XI RWB alert configuration is incompletely displayed
    840849 XI 3.0 Runtime Workbench: SSO2 is not active in this system
    824039 XI30 Runtime Workbench: Display of XI alerts in CCMS
    0000906044 XI30 Alerting: Wrong hostname in the URL of the XI Alert
    0000905896 XI30 Alerting: Message without recipient creates no alert
    0000904825 Synchronous message processing: Error in CCMS connection
    0000902022 XI30 Alertrule insensitive to Receiver Interface
    0000882215 XI 3.0 Runtime Wkbnch: Java Adaptr does not generate alerts
    0000876546 XI 3.0 Runtime Workbench: Missing alerts
    0000870232 XI 3.0 Runtime Workbench: New Alerting functionality
    But start with this one!!!
    913858 XI3.0 Alerting: Troubleshooting
    Hope all these will help you.....Though assuming that you have configured alerts correctly it should work as it worked for me :-).
    Regards,

  • Workflow not getting triggered from MM01

    Hi,
    I understand there is a similar post but the solution is not so clear there.
    I wish to trigger a workflow whenever a material is created using tcode MM01.
    For which i am using BUS1001. (In the header data > start events tab > BO/BUS1001/CREATED binding exists and activated)
    whenever i am creating a material using MM01, and check the trace in SWEL i am getting the following info:
    BUS1001006     VIEWCREATED     25.03.2011     13:00:12          @AI@     No receiver entered
    BUS1001006     CREATED     25.03.2011     13:00:12     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT_IBF
    Can someone please help where to enter the receiver.
    regards
    abhishek

    Hi sanju,
    I have created the event as per your suggestions but the workflow is not yet triggered from mm01.
    the event stack trace is as follows :-
    BUS1001     CREATED     28.03.2011     08:28:42     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT
    BUS1001006     VIEWCREATED     28.03.2011     08:33:03     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT_IBF
    BUS1001006     CREATED     28.03.2011     08:33:03     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT
    BUS1001     CREATED     28.03.2011     08:33:03     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT
    Linkage is activated in SWE2 and the receiver  FM is SWW_WI_CREATE_VIA_EVENT.
    still unable to get the workflow triggered.
    Secondly as per SAP suggestion the BO BUS1001006 should be used for std material master. But while i enter BUS1001006 no such methods are available in F4. (refer atttachment)
    I have checked in the BOR and i see that BUS1001006 is released and active.

  • Workflow not getting triggered from Action definition in CRMD_ORDER

    Hello Experts,
    I have created a workflow which should send mail to partner team in a Change Request.This workflow should be triggered when a particular Zaction is performed on the CR.Zaction is created properly and my workflow is also assigned to it.I have also followed OSS note-733675 and created a workflow container with name "BUSINESSOBJECT" to get the application data into my workflow when the action is performed.My workflow is a background processing one.
    I have tested it separately by providing GUID foreground and it works perfectly fine and mail is sent to partner team.But when i perform the action,mails are not getting triggered nor the workflow.I am not even able to check the logs.I am not even able to know if all the action has triggered my workflow.Kindly help.Would appreciate your contribution.
    Regds
    VLP

    Please check in SWI2_FREQ whether the Workflow is really getting triggered.
    Thanks
    Arghadip

  • Workflow not getting triggered from Z inbound FM

    Hi
    I have created a simple workflow with start events
    Object Type IDOCAPPL EVENT - INPUTERROROCCURRED
    activated the binding and activate the linkage
    also in the idoc inbdound FM i put workflow_result = 99999 also added the object and the start and end event in process code link
    however the workflow is not getting triggered do i need to trigger it manually using swe_event_create....
    what is the miostake

    Hello,
    Even if the event linkage is configured correctly, you have to trigger an event with the FM swe_event_create to run your workflow.
    You have a transaction SWU0 that can simulate an event => then you can check if your event linkage is correct.
    Please reward if useful.
    René

  • RSR_OLAP_BADI  or RSR00002 --not getting triggered from RSRT --Please Help

    Hi All
    Quick reposnse is highly Appreciated and rewarded.
    I wanted to implement a Virtual Key Figure .I have implemented RSR_OLAP_BADI .But when i execute query through RSRT .This BADI is not getting triggered infact its not reaching the Break Point which i have set in DEFINE and COMPUTE methods. I tried setting break point in user exit RSR00002 too but not working.
    Is there any attribute or properties or any technical setting that have to be done for Query to trigger this BADI.Or any settings in BADI required ?
    I am using infocube 0SD_C03 as the filter in BADI attributes.

    Hi!
    Check attributes for you implementation class.
    In DEFINE method set rrke_c_mode-no_selection for your virtual char.
    after that generate query in rsrt (if you set break in INITIALIZE method - you can debug)
    then run the query (if you set break in COMPUTE method - you can debug if query return some data).

  • Alerts not getting generated from Alert rules

    Hello
    I had a problem displaying Alert messages in Alert Inbox.I have created my category and I am raising the alert from BPM and thats working fine.But in some cases where I have define rules(via Alert Configuration in Runtime Workbench) for Alert Generation alerts are not getting raised.I am having the two background jobs running as per the documentation.
    I checked by creating a rule where sender was BPM and receiver is File and the alert should get generated when the Adapter fails(i gave wrond username for FTP server).
    Any idea what step might be missing?
    Thanks in advance.
    Regards
    Rajeev

    Hello Rajeev,
    have you checked in transaction ALRTDISP if the required alert has been created at all?
    If yes, then have a look at the receivers, if no then check the following things:
    - are your jobs running sucessfully?
    - does the alert get created when you execute SALRTPROC report manually?
    - are there old alerts of the same category not confirmed and flag surpress multiple alerts activated in the alert rule?
    Best regards
    Christine

  • Alerts not getting triggered for invalid receiver receiver

    Hello,
    My scenario is IDoc to HTTP.I have defined alert rules for my scenario.
    I have condition mentioned in receiver determination.Depending on vendor number data is sent to corresponding receiver.
    But when i send IDoc is sent with invalid vendor number,it is failing in XI system with error as :No receiver could be determined but not alert is being thrown or triggered.
    Same situation is working in Dev and quality but not in production.
    I ahve checked the alert rules thorughly in all the 3 environments and they are all perfe

    does the error"RCVR_DETERMINATION.NO_RECEIVER_CASE_ASYNC" gets triggered only when reciever service is not
    mentioned in alert rule condition?
    This error gets triggered when no receiver matching with the mentioned Condition is found.....the Condition in Receiver Determination OR if no receiver service exists.
    I hope you have created a rule in Alert Rule section of RWB and have unchecked the Suppress Multiple Alerts options.
    When you get the above error in SXMB_MONI you should get an alert
    Regards,
    Abhishek.

  • Workflow not getting triggered from webdynpro event

    Hello gurus,
    I have a requirement in which if an employee changes his own information on the ESS portal, then an approval should be done by HR. For this i created a custom webdynpro application in which i fetch the employee data and check it with old data in one view and when user clicks save button the approval workflow should be triggered.
    For this i created a custom BO using transaction SWO1. I added a 'CHANGE' event and 'send_data_to_wf' method.
    In SWDD i created the workflow which is working fine when i test it in SWDD only. But when i trigger it using FM 'SWE_CREATE_EVENT', only the event is getting triggered and not the workflow. I checked the trace in transaction SWEL in which i can see the 'CHANGE' event under Event column but Name of Reciever Type column is emty. It should display my custom workflow ID. Please let me know where i m lacking or going wrong.
    Regards,
    Yayati Ekbote

    Hello Ricardo,
    Thanks for immediate reply. Yes, the linkage is active in SWE2. My custom object type is ZHRAD and event is change. I also tried the FM 'SAP_WAPI_CREATE_EVENT'. But in this FM the event also doesn't get triggered. Using FM 'SWE_CREATE_EVENT' atleast triggers the event. I debugged the FM. The container inside the FM is remaining initial. I am posting my code which i am using.
    DATA: pernr TYPE pa0001-pernr VALUE '40000001'.
      DATA: objtype   TYPE swr_struct-object_typ VALUE 'ZHRADCHO',
            objkey    TYPE sweinstcou-objkey,
            event     TYPE swr_struct-event VALUE 'CHANGE',
            it_wfcont TYPE STANDARD TABLE OF swcont,
            wa_wfcont TYPE swcont,
            event_id  TYPE swedumevid-evtid,
            ret_code  TYPE swedumevid-evtid.
      wa_wfcont-element = 'PERNR'.
      wa_wfcont-value = '40000001'.
      APPEND wa_wfcont TO it_wfcont.
      wa_wfcont-element = 'SUBTY'.
      wa_wfcont-value = '1'.
      APPEND wa_wfcont TO it_wfcont.
      wa_wfcont-element = 'ENDDA'.
      wa_wfcont-value = sy-datum.
      APPEND wa_wfcont TO it_wfcont.
      wa_wfcont-element = 'BEGDA'.
      wa_wfcont-value = sy-datum.
      APPEND wa_wfcont TO it_wfcont.
      objkey = pernr.
    CALL FUNCTION 'SWE_EVENT_CREATE'
      EXPORTING
        objtype                       = objtype
        objkey                        = objkey
        event                         = event
    *   CREATOR                       = ' '
    *   TAKE_WORKITEM_REQUESTER       = ' '
    *   START_WITH_DELAY              = ' '
    *   START_RECFB_SYNCHRON          = ' '
    *   NO_COMMIT_FOR_QUEUE           = ' '
    *   DEBUG_FLAG                    = ' '
    *   NO_LOGGING                    = ' '
    *   IDENT                         =
    * IMPORTING
    *   EVENT_ID                      =
    *   RECEIVER_COUNT                =
    TABLES
       EVENT_CONTAINER               = it_wfcont
    EXCEPTIONS
       OBJTYPE_NOT_FOUND             = 1
       OTHERS                        = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    COMMIT WORK.

  • Exit in CNEX0009 not getting triggered from CJ20n

    Dear All,
    I am trying to use the exit ( EXIT_SAPLCOMK_001) present in enhancement package CNEX0009.
    This exit description says that we can modify Material Components in Networks'.
    But when we create a new material component in CJ20n, this exit is not getting called.
    Has anyone implemented or used this exit anytime before. Any type of information regarding this exit will be helpful.
    Points will be awarded for the replies given if found useful.
    Regards,
    rijuraj

    Thanks for the replies
    Hi Stu,
    Yes I have done all the CMOD related steps properly.
    Hi Amit,
    It is mentioned in the enhancement documentation that we can use this exit to 'PROCESS MATERIAL components in network orders).
    Also the exit EXIT_SAPLCOMK_001 contains the entries related to the material component that can be edited under a particular network(As per the enhancement documentation).
    Please correct me if I am wrong
    Regards,
    Rijuraj

  • ALERT not getting triggered for messages in error in adapter engine

    Hi All,
    I am doing the same scenario where I have created two Alert category Alert_cat1 and Alert_cat2, both are similar but one i have created for error in integration engine(Alert_cat1 ) and other for adapter engine(Alert_cat2).
    Now for Alert_cat1 i have created a rule and in the setting "where did the error occur" I have given no restriction.
    Now for Alert_cat2,as discussed in the above blog I have created many rule each for various adapter.
    I have tested it, above mentioned configuration is working for message mapping error (sxmb_moni)
    but not for any error in adapter engine for messages in waiting or system erroe status.
    Kindly suggest where I am going wrong.
    Regards
    Shefali S

    HI,
    please refer this below blog:
    Does Alerts work for Integrated configurations scenario??
    thanks,

  • Alerts not getting Triggered for Integration Engine Error

    Hi,
    We are configuring Alert Framework in our project. Here when the scenario fails at communication channel we receive alerts but when it fails in message mapping we aren't getting any alerts.
    Below are the settings:
    Alert rule created with no restrictions (Sender: * Receiver: *)
    Where did error occur ? No restriction
    Suppress multiple alerts of this Rule : Not set
    It would be great if some would help us on this.
    Regards,
    Tejas

    If you have created separate alert categories then test you alert as described later in this post. Else create a new alert category for your IE level exceptions. Give a description, long text, add your sap id in the fixed recipient list. Make sure you have ur email id configured for ur sap id in SU01. Create a rule in RWB. Make sure that you click on the "Add rule" tab once done. Keep all the entries as default. Give a description, remove suppress multiple alerts ,for now, keep rule active checkbox as checked, where did error occur- choose IE both stars.
    Now we need to test if this alert category is working fine. Go to se38 and execute RSALERTTEST. There give the name of your alert category. Execute. Now check in the ALRTDISP, if you get an entry there. Let me know....

  • Alert is not getting triggered in QA

    Hai Experts!
    i have transported the Alert Classification and Alert Category from development system to Quality system and i created the alert rule in QA. Now alerts mails are not tiggering. In se30 i have excecuted the RSALERTTEST that time i am getting a mail in the alert inbox and also to my mail box but for a real time data alert is not getting triggered.
    Pls help me to solve this issue.
    Regard's
    Preethi

    Hi
    Schedule send job
    please see as
    help.sap says
    Send Job
    E-mails sent from an SAP application are first stored in a queue. A periodical background process, the SAPconnect send job, gets the e-mails from this queue and sends them over the Internet. To schedule this job in SAPconnect: Administration, proceed as follows:
    i.         Choose View ® Jobs.
    ii.       If no other job has been scheduled, choose Job ® Create.
    iii.      Enter a job name and confirm it.
    iv.      Select the variant SAP&CONNECTALL by positioning the cursor on it.
    v.        Choose Schedule Job.
    vi.      Choose Schedule periodically.
    vii.     Select the interval you require, such as 10 minutes.
    viii.   Choose Create.
    Refer this.
    http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm

  • Escalation not getting triggered in  Alert

    Hi
    I have triggered an alert from BPM which is successfully received both in my mail box as well as Alert inbox.
    If the Alert is not confirmed, it should trigger an Escalation. In the Alert configuration I have maintained the recipient of the Escalation message, the tolerance limit and also have checked "Escalation Active"
    But the Escalation is not getting triggered. Kindly advice...
    Anup

    Hi Anup,
    Please go through these..
    http://help.sap.com/saphelp_nw2004s/helpdata/en/96/f1033c128f4a7de10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4a/2dc1e0778648afa9e69d9a44244def/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
    cheers,
    Prashanth

  • /BDL/TASK_PROCESSOR not getting triggered in satellite system from Solman

    Hi,
    We have scheduled EWA report in Solution Manager for one of the satellite system.
    Solution Manager has sudddenly stopped creating of job /BDL/TASK_PROCESSOR0000002218 (ie job which is created immediately as EWA is scheduled in Solution Manager)
    /BDL/TASK_PROCESSOR is running correctly and on hourly basis in satellite.
    The EWA report is getting generated in Solution Manager after long time and without job /BDL/TASK_PROCESSOR0000002218 (is sessin specific job) being triggered.
    Kindly help.
    Regards,
    Trupti M

    Hi Paul,
    My problem is solved.
    Actually the Task: EarlyWatch Alert for Solution Manager under 'To Do' view of sdccn of satellite system was somehow getting scheduled as Back dated(ie instead of 30.04.2020 it was getting scheduled at 28.04.2010)
    Due to this when we would do 'Start now' for the Task 'EarlyWatch Alert for Solution Manage' it was not getting triggered.
    So I manually did refresh session which was mentioned under steps for manully sending data to SolMan under solution_mamanger tcode.
    Due to this job BDL/TASK_PROCESSOR0000002237  got created.After this  job got completed Task ''EarlyWatch Alert for Solution Manager ' got automatically generated.
    I back dated the date for Task ''EarlyWatch Alert for Solution Manager"  and started it.
    Due to this the job /BDL/TASK_PROCESSOR0000002238  got created  in satellite system for sending data to SolMan (This was not happening earlier.)
    Extract from Solution_Manager tcode when scheduling:
    When the Session Refresh task has been processed, a new task with the appropriate session type and session number appears in the To do view. This task collects and sends the data for your session. If a new task does not appear, search in the task-specific log for errors that ocurred during the Session Refresh task and make any necessary corrections.
    To start the task immediately, select it and right-click to call up the context menu.
    Choose Start Now. When the task has been processed successfully, it appears in the Done view. The data has been sent to your SAP Solution Manager system. You can check this in the task-specific log.
    Thanks for all your help. Hoping my post will also be helpful for others.
    Regards,
    Trupti M

Maybe you are looking for