Alerts on confirmation of Business partner

Hello,
We are on crm2007 and have new SP for BBPCRM SAPKU60007.
Now I can't see the alerts I've defined long ago.
I made an alert that congratulate the user entred with "Good Morning" and policy rule that triggered this alert
on BPConfirmed.
We do not see any more the alert. I tried to enter the rule and change something - NOTHING Changed.
Any idea? something has to be activated?
Sara

Hi Sara,
I dont think so something needs to be activated for triggering alerts in web UI.
Have you configured the alerts again in the system?
Regards,
Manish

Similar Messages

  • No automatic Confirm of Business Partner requirde

    Hi,
    I have generated a Call-List for Organizations with and without Contact Person`s.
    Using next Call the System confirms the selected Business Partner from the Call-List (without or with the Conatct Person) automatically.
    Where can I set the Customizing so that I have first the Possibilty to select a Contact Person for the Organization manualy and then confirm it.
    Thanks and regards,
    Andreas

    Under call list profile , uncheck the 'Auto prepare' flag
    spro-> crm-> interaction center webclient -> additional function -> call list -> Define call list profiles

  • Process Integration Errors - Business Partner Replicate Confirmation Out

    Hi,
    Our C4C system is integrated (HCI) with our On-Prem system for our Accounts and Employees.  SAP was our integrated but for awhile now we are getting Health Check Incidents created in regards to a Business Partner Replicate Confirmation Out issue.  Reading through the incident info and going to Business Communication Monitoring page, we see multiple Technical Error messages that are Outgoing.  Each one indicates it's an Internal Server Error that has a timeout inteval of 120 minutes.  I know I can restart them but have a few questions that hopefully someone can answer
    1.  Why are they happening at a frequent rate?
    2.  Does this indicate that something is not configured in the system correctly?
    3.  Is my assumption that the issue lies in C4C since they are outgoing to our OnPrem system?
    4.  What can we do to make these confirmation messages go through without error.
    I have attached a copy of the incident info and the payload from one of the errors.
    Any help would be appreciated.
    Thanks.
    Jeff

    Hello Jeff,
    the Confirmation Message is mainly needed for storing an ID mapping in the system which has sended originally the Request message. If this confirmation message fails with an http code 500 then this indicates that the service is not properly configured. You should check your configuration on HCI and in CRM backend. A first check could be the "Connection Check" in the Communication Arrangement for this specific service. It should return something like 405 wrong method - this would indicate that the service is available on HCI.
    Best regards,
    Berthold

  • Auto-Confirm Business Partner

    Hello Everyone,
    I have a situation and I was hoping someone can help me out.  When an agent first logs into the ICWeb they are taken to the screen BuPaSearchB2B.htm.  I added a new button on this screen called "Continue".  When this button is clicked I want to auto-confirm a default Business Partner that I created.  The BP number is "0000000011".  Does someone know how to trick the system into using this BP to allow me to continue? Basically, it's auto-confirming a hard-coded BP.
    Thanks for your help!!

    Hi Jolly,
    Please explain further,
      I added a new button on this screen called "Continue". When this button is clicked I want to auto-confirm a default Business Partner that I created.
    What do you mean by auto-confirm BP in your process. what does the process do, do you want to navigate to some other page withe default BP?
    Thank you
    Arun Prasad

  • How to obtain Campaigns for the confirmed Business partner?

    Hi,
    Currently when we go to the campaigns view, we can see all the campaigns created in the system. Is there a way to obtain the campaigns relevant to the confirmed business partner.
    The Search object (MktRootCampaigns) contains only one parameter called "profile_id". (Campaign Profile attached to the IC Web client profile).
    This campaign profile is created in SPRO .... and attached to the IC Web Profile.
    The problem here is ... this profile allows setting of parameters statically in SPRO .....
    Example … we can mention in the profile parameters … “To show all campaigns with low priority”
    The other way is to enhance the BOL search object.
    I tried adding a new parameter to the search object MktRootCampaigns structure CRMS_IC_MKT_CAMPAIGN_SEARCH  to allow dynamic search of campaigns ....
    The structure CRMS_IC_MKT_CAMPAIGN_SEARCH does not allow enhancement of the search structure... since its enhancement category is "cannot be enhanced"
    I checked note 914809. But this structure does not allow me to change the enhancement category either.
    Any insight into this would be helpful.
    Kind Regards
    Vandana

    Hi,
    Something like this is given in the interaction center book. With call lists though ...
    campaigns and call lists use the same GENIL class.
    It should be of help.
    Regards
    Shivani.

  • Sending alert as email to a Business Partner, is it possible??

    Hi all,
    One of my clients asked me whether it is possible to send automatic alerts via email to Business Partners?
    It seems like you can do it only when BP is a user in SAP or maybe not?
    Thanks for any help,
    Maciej

    Hi Maciej Kozlowski
    The alerts are available to listed users in the SAP Business One Company database only. You could achieve this by adding each BP contact as a user in the system, but that could be a bit messy to manage and the problem would be which BP email address to use. There would have to be a trigger that determines the BP code and translates to the BP email address.
    The alternative is to let the alert notify a user, who in turn redirects it to an email manually.
    The question is, what type of alert are you referring to? Is it specific to one BP or could it change from day to day based on for example BP balance, etc. If the report is dynamic and does not always relate to a specific BP, it will be difficult.
    Could you maybe give us more details on what you want to achieve and we could guide you better?
    Kind regards
    Peter Juby

  • Delay in creation of idocs after business partner change

    Hello all,
    In our production CRM system, we had an issue where even though users were making changes/creation of business partners, there was no trigger for the creation of idocs to be sent to the middleware system (connected via ALE to the CRM system).
    This happened for a period of 17 minutes and then suddenly idocs started generating for the changes and posted to the middleware system as normal.
    There were no resource constraints in the system during that time.  We also checked the ORACLE database alert file to see if there were any database issues and found nothing.
    The main activity going on that time was the download of product/materials from our R/3 system. 
    We can confirm that bdocs were generated for the business partner change to be sent to R/3 and those were sent succesfully during these 17 minutes.  So only the creation of idocs were impacted.
    We are trying to determine root cause as to why for those 17 minutes, idocs were not getting created.
    Any help is appreciated.
    Thanks,
    Ramesh

    Hello Kiran,
    Thanks for the reply.  The issue really is why during those 17 minutes idocs were not generated for the business partner changes.
    After those 17 minutes, idocs started generating fine (even for those business partner changes that happened during those 17 minutes).
    So we are looking to find a root cause for this behavior.
    Thanks,
    Ramesh

  • Need Enhancement spot in Business Partner Creation/Change

    Hi all ,
    In Business partner creation/Change screen(Tcode BP),if pressing BACK or CANCEL button without saving data, it will ask for confirmation that Want to save data or not.If we press YES it will save the data,or if we press  NO it won't. Is there any Enhancement spot (User exit or BADi) available after triggering the above confirmation message.If so kindly intimate me the Exit name or BADi name.
    Thanks in Advance..

    Try using Implicit Enhancements .
    I have got implicit enhancements over here for you.
    check out if Useful while dubugging.
    include :LBUS_LOCATORF05
    screen 3000
    prog SAPLBUS_LOCATOR
    form dynpro_pai_begin
    dynpro_pai_end
    create IMPLICIT enhancements here.
    To avoid confusion write your code after IF condition checking for
    GV_OK_CODE which is BUS_MAIN_BACK and dynpro number.
    If you dont know Implicit enhancements try this link
    http://www.sapdev.co.uk/enhance/eframework/eframeworkhome.htm
    checking ok_code is necessay otherwise it will be executed everytime PAIis triggered.

  • New HTML for Business Partner Search in CIC0

    Hi,
    I created a new HTML object, copy of CRM_CIC_SEARCH_DISPLAY, in SMW0, changed the HTML code and assigned this new HTML to my Business Partner Search profile.
    But when testing this change it seems that the HTML is incorrect because when I search and confirm the BP, the fields in the HTML are not filled with the BP information.
    I imported the HTML code to the HTML object CRM_CIC_SEARCH_DISPLAY and it works fine. So the problem is not with the code, but with the HTML object itself. Is there any need to activate it or something like that?!
    Thanks a lot!
    Susana Messias

    Hello Susana,
    please check if you have done all the necessary steps:
    1. Copy in transaction SMW0 the HTML template CRM_CIC_SEARCH_DISPLAY      an own one (Z_<YOURNAME>.htm).
    2. Export this new template to your local PC and use a HTML Editor to
       work on this file (like Frontpage).
    3. Import this new page in SMW0 again to the copied Web object.
    4. Make sure in transaction CRMC_CIC_SEARCH_CNTR the mapping of the
       fields is setup for the new template (copy all entries of the
       standard template).
    5. Make sure the new web object is assigned to the search profile in
       CRMC_CIC_SEARCH_RULE
    Regards, Gerhard

  • Business partner of organizational unit is not consistent

    Hi,
    Client is on SRM 4.0. When we are trying to search a user in the org structure, and when clicking on "Check" for this user, it was showing fine. But when we are searching any BP in the org strucutre, then immediately the BP name is vanishing against the BP of the user and when doing the "Check" it is showing the below two messages:
    Business Partner of organizational unit XXXXXXX is not consistent
    User cannot be repaired becasue the organizational unit contains errors
    When checking in BBP_CHECK_USRES, the user is not showing as defective. It is green.
    Similarly, the the organizational unit check is also showing as green.
    System is advising to run BBP_BP_OM_INTEGRATE. When we run this for the org units, these are coming as green.
    Users are able to create the shopping carts and also are able to create confirmations. But the problem is happening for some of the users where the system is not allowing to create shopping basket / confirmation.
    Strange thing is that, when we are searching the user by user id in the org structure, then the check is showing no messages. But if we search the same user using the BP number, then in the check, the messages are coming. And once the messages appear, it is appearing for all the users in the org strucutre even at the root node level.
    Any help is highly appreciated.
    Thanks & Regards,
    Aswini

    Hi Aswini,
    There are some possibilities to raise these kind of errors messages:                                                                               
    1) User with inconsistent data.                                           
    Please, check the instructions described in the following notes:          
    597475 - Repair users with inconsistent address data                      
    -> use the report B_REPAIR_EBP_USER_2 to make the user consistent.        
    419423 - Repairing incorrect EBP users                                    
    350129 - Creating business partner for organizational unit                                                                               
    When you create the Org Units have you fully completed the address        
    data, e.g post coe, telephone/fax number etc..                            
    If not, please enter a full address, save the data and see if this        
    generates the Business Partner.                                           
    Remember, that you can delete this user and create a new user.                                                                               
    2) Error in the positions after HR replication                                                                               
    Please, implement the following notes and retest the scenario:            
    1056873 -  Incorrect SRM users after HR distribution                      
    1016450 - Replication of persons deletes positions in SRM                                                                               
    After implementing these notes you should send the employee               
    corresponsing to the user in error with his position (using               
    transaction PFAL or report RHALEINI in UPDATE mode for all periods.                                                                               
    3) the user was deleted and a new was created and during these two        
    actions the user opened documents. So, in this case, the new user         
    becomes inconsistent                                                                               
    If the user is deleted from SU01 still the BP and S which is related to   
    that user will be retained (we can see this in PPOMA_BBP) transaction.    
    In this case we can create the user again using SU01 and can be attached  
    with the old 'S' and 'BP'.                                                                               
    2. If the user is completed deleted ie., all relations BP and S.          
    The new user has created.   
    In this case if the new user is corrupted we can delete this                  
    user (since the new user doesn't create any documents so far). But the        
    old documents should refer to the new BP related to the new user.   
    ========================
    Also, another option would be to follow the below instructions
    After applying the notes 1056873 & 1016450, send the employees        
    corresponding to the users in errors with their positions (using              
    transaction PFAL or report RHALEINI in UPDATE mode for all periods,           
    using evaluation path A008) ? If not, please do this and it must repair       
    the SRM users. Please test and give me the feedback.     
    Hope this helps,
    Kind Regards,
    Matthew

  • Multiple Lines for one Business Partner on Agng Report

    Hi all,
    From version 8.8 of SAP Business One (and PL 08 which I have tested) on the aging report I see, for the same Business Partner, more than one lines with different amounts. The sum of those amounts make the real balance of the BP so i think that what it does is to categorize in some way the transactions.
    I cannot figure out why it does that.
    Any help?
    Thanks
    Gerasimos

    Hi,
    Can you confirm whether :
    1) The BP Code appearing in the Aging is having the same case (Upper or lower) or they are different?
    2) Can you also confirm whether Bp Code has entries where control account is different?
    In the meantime, I will check some documentation/Note if available on the query.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Business partner retrieval from BOL

    Although I am not new to ABAP and CRM I have difficulties understanding how the BOL/GENIL principal works and how to make full use of it.
    Problem: I have developed a custom BSP which is called from IC Webclient (ZC_ICWEB).
    I would like to know if there is a way of retrieving the business partner which has been identified (either via identification or inbox) in my own BSP.
    Is the BOL always available in whatever BSP (custom or standard) you are in? How can I read this object and what query do I need to execute in order to obtain PARTNER?

    Hi ,
    Get the Variables stored in the gloabl Context from the interation center framework
    Use the following code ,use the interface if_iccmp_global_data_cont_con to get the global variables
    DATA: lr_gdc TYPE REF TO if_crm_ui_data_context.
    lr_gdc = cl_crm_ui_data_context_srv=>get_instance( me ).
    lr_entity = lr_gdc->get_entity( name = if_iccmp_global_data_cont_con=>gdc_currentcustomer ).
    GDC_CURRENTCUSTOMER gives the confirmed BP in the IC_Agent Role
    Regards
    Vikranth

  • How to get the old shopping cart detail if I change the Business partner.

    Hi all ,
    Can any one help me in below describe query?
    Scenario:
    User was getting the error regarding business partner while shopping.
    So I repair the user from BBP_CHECK_USERS.
    Now definitly its business partner has changed.User can also shop.
    But the problem lies is he has lost his all the old shopping cart which was related to old business partner.
    Can any one tell me how to get those detail of the old shopping cart which was related to old business partner?

    Hi
    <b>Which SRM version are you using ?</b>
    <u>Please check out the links/pointers -></u>
    Moving workitems between SRM inboxes
    Re: How to re-instate the deleted Position of the user into Org structure.
    Re: Position Deleted for an User, created a new userid; Confirmation Issues
    Re: Need help to "access" deleted users's inbox & reassign work items
    Re: How to delete a user in the Organizational structure
    Re: Transfer of open POs or SCs?
    <b>Hope this will definitely help.</b>
    Do let me know.
    Regards
    - Atul

  • Indicator u0093GR Conf Expectedu0094 in Business Partner

    When vendor master is replicated from R/3 to SRM using program BBP_VENDOR_SYNC, Indicator “GR Conf Expected” in Business Partner is always set to ON.
    Is there any setting which will make this indicator OFF by default at the time of replication so that user need do it manually for each vendor in SRM?
    Software Version: SRM SERVER 5.50 SP08, R/3 ECC 6.0
    Thanks,
    Milind

    Hi
    <b>It's a standard SAP behaviour.</b>
    Try to you un-check "Goods Invoice Reciept Expected" and " Indicator GR.Conf.Expected " indicators for the Vendor/Purg.org in R/3 system TCODE.
    <u>Related links -></u>
    Vendor master data
    Re: PO value not transferred and the Free Item is checked.
    Note 518340 EBP: Tolerance checks with goods receipt and invoice
    Note 363069 - BBP invoice for Confirmation of PO limit
    Do let me know.
    Regards
    - Atul

  • Keeping Business Partner numbering same in ECC and GTS

    Hi Experts,
    Does anyone have experience on projects/clients where the Numbering for Customers/vendor in ECC and the related Business Partner in GTS is same?
    For an example: Customer# 12345, BP#12345 in ECC.
    In GTS: BP# 12345.
    We are planning to use MDG system for Master data distribution across systems. I believed it is possible to keep the Numbering same just like we do in SRM.
    But on checking further in detail, I feel it is not possible in standard. Can someone provide their inputs on if this can be achieved with standard setup.
    On checking the code in GTS, I can see Number range group in GTS is determined in FM BUP_CHECK_GROUPING. This FM uses Internal numbering always when there is no BP# is sent from ECC for the Customer/Vendor#. Only if the BP# is sent, system will look for external number range.
    In ECC, the standard code is always keeping BP# and Numbering grouping as blank/space in FM /SAPSLL/DEBMAS_1006_MAP_R3. Which means standard SAP doesn't allow keeping BP Numbers sync'd in ECC and GTS.
    So, I am not sure if this is possible with standard setup. Can someone confirm please?
    If not possible, I will look for enhancements.
    Thanks in advance!!!
    Regards
    Dhilipan

    Hi Dhilipan,
    I briefly checked the program code.  In the API1006_HEAD structure, field BPARTNER is transferred to GTS with value <SPACE> (hard-coded in Function Module /SAPSLL/DEBMAS_1006_MAP_R3), and I think that might be the field you'd need to use.
    From what I can see, that field is used as the Partner Number in GTS if it is filled; otherwise field EXTERN_NO is used.  So it would be worth a try (in debug) to fill the BPARTNER field (max. 10 characters) and see what happens.
    I'm not sure how the Number Range is assigned - it could involve some "profiles", or perhaps be a nice surprise.  I'm sure you'll have fun in finding out: do please let us know.
    Regards,
    Dave

Maybe you are looking for