Alerts related to monitored process in RZ20
HI Experts,
I got below alerts(Red) in RZ20. (SAP version ECC 6.0 & Oracle 10.2.0 )
Monitored Processes
jlaunch-DSAPINFO=BW1_00_dispatcher*
SAPServiceBW1: Process Count 1 , Green 12.04.2011 , 07:47:53
SAPServiceBW1: CPU 0.03 % , Green 12.04.2011 , 07:47:53
SAPServiceBW1: Resident Size 216804 KB, Red 12.04.2011 , 07:47:53
SAPServiceBW1: VM Size 525980 KB, Red 12.04.2011 , 07:47:53
jlaunch-DSAPINFO=BW1_00_server*
SAPServiceBW1: Process Count 1 , Green 12.04.2011 , 07:47:53
SAPServiceBW1: CPU 1.26 % , Red 12.04.2011 , 07:47:53
SAPServiceBW1: Resident Size 2247864 KB, Red 12.04.2011 , 07:47:53
SAPServiceBW1: VM Size 3172936 KB, Red 12.04.2011 , 07:47:53
jlaunch-DSAPINFO=BW1_00_sdm*
SAPServiceBW1: Process Count 1 , Green 12.04.2011 , 07:47:53
SAPServiceBW1: CPU 0 % , Green 12.04.2011 , 07:47:53
SAPServiceBW1: Resident Size 160076 KB, Red 12.04.2011 , 07:47:53
SAPServiceBW1: VM Size 237660 KB, Red 12.04.2011 , 07:47:53
1. are above alerts are serious problems?
2. How can we avoid those red alerts?
Thanks in advance!!!
Regards
Veera
Edited by: Veerab on May 5, 2011 10:47 AM
not received any response
Similar Messages
-
GGMonitor-Stopping &starting related goldengate monitor processes.
Hi All,
I have installed the Goldengate Monitor on a server.
For maintenance purposes I am planning to bring down the database.
As part of this What is the procedure for bringing down the Goldengate monitor processes and bring it up back again ?
Thanks,Monitor can be stopped and restarted with the <Monitor Install Directory>/bin/monitor.sh stop and <Monitor Install Directory>/bin/monitor.sh start commands
It may or may not be necessary to stop the JAGENTs of each of your OGG installs prior to stopping Monitor. I'm not sure actually. The JAGENT might reconnect just fine though when Monitor is back up. Something to test. -
We are getting this alert on a fair few of our VMs with VHDXs and Dynamic VHDs. Everything seems OK but I am not sure what this actually means and what I need to do to resolve the issue. How do I reset the error count if that is what is required? Thanks
in advance.
Alert: Error Count Monitor Resolution state: New
Error Count Monitor Source: MyVm01 Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE Last modified by: System Last modified time: 2/9/2013 2:08:48 PM Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual
Sat 09/02
To:Administrator
09 February 2013 14:09
Alert: Error Count Monitor
Source: MyVm01
Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE
Last modified by: System
Last modified time: 2/9/2013 2:08:48 PM
Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual hard disks-MyVm01-DATA02.vhdx
Object Hyper-V Virtual Storage Device
Counter Error Count
Has a value 9
At time 2013-02-09T14:08:48.0000000+00:00
DarrenBut I am getting this alert from SCOM and SCOM has no information about the alert for me to find out what to do - thought that was the point of SCOM to let you know of problems and how to resolve them. :)
The alert is coming from the Error Count Monitor that is part of the Hyper-V Management Pack Extensions (v 4.0.0.0)
I have tried looking in the Event Logs on the Host and there doesn't seem to be any storage related errors there. I am trying to establish if this is a false positive, why it is happening and if it is safe to override and ignore.
There is nothing on the Product Knowledge tab and nothing on the Alert Context other than what I have already mentioned (see below).
Thanks for responding.
Time Sampled:
09/02/2013 14:08:48
Object Name:
Hyper-V Virtual Storage Device
Counter Name:
Error Count
Instance Name:
c:-clusterstorage-volume1-myvm-virtual
hard disks-MyVM-DATA02.vhdx
Value:
9
Darren -
How do i get the error detil within monitoring process .. ???
Dear All,
Hi all ... It's regarding monitoring
If we monitor the extraction's request, than we go detail, we're gonna see the 3 tabs: Header, Status, and Details. You'll see the status of your data extraction request..
Now, if i want to get the data in the details Or Status, does anyone know what table that keep that information??
Or ..
Is there a function to achieve that information ???
Could you kindly share to me please .. ????
Thanks in advance.
Best regards,
Niel.Dear Niel,
Tcode: RSPC
To create process chain go into RSPC there we have 4 views like
1. planning view (to create process chain)
2. checking view(to check the process chain)
3. log view (to monitor process chain)
4. detail view(to see which process type has which variants)
You cant get the data in Monitor as it is used only for monitoring purpose
you can get it information through mail.. for that
try
You can send messages to an application process of the chain, depending on the success or failure of the process.
1. To do this, using the context menu for a process, create another process variant of type Send Message.
2. If you maintain a message, first specify whether you want the message to be sent when the process has been completed successfully or unsuccessfully. Then choose Next.
3. A dialog box appears, in which you can select an existing process variant or create a new one.
4. If you create a new process variant, edit the document that is going to be sent and maintain a list of recipients.
5. Save your process variant and go back.
The message process variant is now assigned to your application process. When the message is sent, the status information and the process log are also sent.
Note, you must configure SAPconnect in order to ensure that your system can send email - use transaction SCOT if this has not been configured.
Thanks for any points you choose to assign (that is the way to say thansk in SDN).
It's set as a property for an individual process in the chain. You would have to set on each process where you want notification.
One technique you might consider, is that tou can create a "meta-chain" made up of local chains, and you can set a message on each of the "local chain" processes in the meta-chain
Also go through these links
How to Trigger an Alert from a Process Chain (NW7.0)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0f4e952-e46e-2910-1f9e-cae187cd16d1
SAP Network Blog: Information Broadcaster Triggered by a Process Chain
/people/anil.bavaraju/blog/2008/02/07/information-broadcaster-triggered-by-a-process-chain
Hope it helps you,Revert me back if you have any queries
Assign ponts if helpful
Regards
Bala -
Difference between Monitoring Process and Integration Process
What is the difference between the Monitoring Process object for BAM and Integration Process object? Both seem to have exactly the same design environment in the Enterprise Services Builder.
Is it so that Monitoring Process alarms only appear in the UWL of the specified user?
Also, suppose I am wanting to create a receive step to wait for the arrival of a message instead of an event (say I want to check a specific message arrives before a certain time, correlating several fields of the message, which is something I cannot do I believe with alert monitoring). Am I able to do this? I cannot see a reason why not, but I'd like confirmation.
BR,
Tony.Hi,
Thanks for the link! I read through the replies, but it still leaves a couple of basic questions unsolved:
1) Why did SAP discriminate these two types of PI objects at design time - the Monitoring Process and the Integration Process?
2) new capabilities of PI 7.1 are touted as:
Event provisioning and consumption for BAM:
- Local container
- Subscription and handling of business process events
- Milestone Monitoring
So can I only employ event provisioning, subscription of Business process Events and Milestome monioring with a Monitoring process, or can I do that with an Integration Process as well?
BR,
Tony. -
ABAP Central Service not available alert in Technical Monitoring
Hi Gurus,
Need help with this alert which i am getting from Solman 7.1 SP10.
ABAP Message Server Status
XXX-ABAP
3
3
3
No process found for: msg_server(.*)
I have already checked following notes but no luck
1419603 - Missing ABAP SAP Central Services (ASCS) instance in SLD/LMDB
1916237 - ABAP Central Service not available alert in Technical Monitoring
Our managed system kernel is 720 P 401 as per-requisites for the sld registration.
Have tried few things here and there but no luck.
Please suggest is any has any suggestion or solution.
DevHi Roland,
I followed the note 1717846 and performed all the steps successfully.. But still no luck with ASCS in SLD.
Any ideas or suggestions .?
Attaching the logs for your reference:
Tue Apr 15 15:52:23 2014 Parsing XML document.
Tue Apr 15 15:52:23 2014 Supplier Name: BCControlInstance
Tue Apr 15 15:52:23 2014 Supplier Version: 1.0
Tue Apr 15 15:52:23 2014 Supplier Vendor:
Tue Apr 15 15:52:23 2014 CIM Model Version: 1.5.29
Tue Apr 15 15:52:23 2014 Using destination file '/usr/sap/XXX/SYS/global/slddest.cfg'.
Tue Apr 15 15:52:23 2014 Use binary key file '/usr/sap/XXX/SYS/global/slddest.cfg.key' for data decryption
Tue Apr 15 15:52:23 2014 Use encryted destination file '/usr/sap/XXX/SYS/global/slddest.cfg' as data source
Tue Apr 15 15:52:23 2014 HTTP trace: false
Tue Apr 15 15:52:23 2014 Data trace: false
Tue Apr 15 15:52:23 2014 Using destination file '/usr/sap/XXX/SYS/global/slddest.cfg'.
Tue Apr 15 15:52:23 2014 Use binary key file '/usr/sap/XXX/SYS/global/slddest.cfg.key' for data decryption
Tue Apr 15 15:52:23 2014 Use encryted destination file '/usr/sap/xXX/SYS/global/slddest.cfg' as data source
Tue Apr 15 15:52:23 2014 ******************************
Tue Apr 15 15:52:23 2014 *** Start SLD Registration ***
Tue Apr 15 15:52:23 2014 ******************************
Tue Apr 15 15:52:23 2014 HTTP open timeout = 420 sec
Tue Apr 15 15:52:23 2014 HTTP send timeout = 420 sec
Tue Apr 15 15:52:23 2014 HTTP response timeout = 420 sec
Tue Apr 15 15:52:23 2014 Used URL: http://sapr6bv:51600/sld/ds
Tue Apr 15 15:52:23 2014 HTTP open status: true - NI RC=1
Tue Apr 15 15:52:23 2014 HTTP send successful.
Tue Apr 15 15:52:23 2014 Return code: 200 --- Return message: (OK)
Tue Apr 15 15:52:23 2014 HTTP response: Success. HTTP status code: 200
Tue Apr 15 15:52:23 2014 ****************************
Tue Apr 15 15:52:23 2014 *** End SLD Registration ***
Tue Apr 15 15:52:23 2014 **************************** -
Monitor Processes on Windows 2000 or XP
Can someone help? How do you monitor processes on a Windows platform. I would like to write my own application in java to monitor processes on windows 2000/XP. Where do I start? class Runnable or class Process?
thanks
Here's another post that relates to this.
http://forum.java.sun.com/thread.jsp?forum=54&thread=386882&tstart=0&trange=15Definitely not Runnable. And Process is only going to do you any good if your Java class was the one that started those processes running. My guess is that isn't the case.
Personally I wouldn't use Java to do what you are asking about. I am sure there are Windows APIs for that sort of thing, which you could readily use in a Microsoft-specific language, but those APIs haven't been made part of the Java API. -
Difference between Integration Process and Monitoring Process
Hi Experts,
What is the difference between Integration Process and Monitoring Process available in PI7.1?
SAP says that Monitoring process is a special kind of integration process that receives the event messages.
My doubt is even integration process can receive the event messages.
Why these two different type of entities are created for the same purpose?
And what is the technical difference between the two in terms of PI perspective?
Regards,
Sami.My question is now answered.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70a25d3a-e4fa-2a10-43b5-b4169ba3eb17]
On page 17 of this pdf following sentence is mentioned :-
From technical perspective, there is no difference between monitoring process and integration process.
Though logically those are two deifferent things.
Monitoring porcesses are used to receive only event messages that is comprises of event data only.
Like Purchase order creation is a event and its event message will have the event data like Order Id, Created on, Created by, Quantity etc., instead of whole purchase order.
Where as Integration Process is a way to provide solution in some specific circummtances like where we have to automate our process or where we need something in between for the course of communication.
Guys thanks for your precious time.
Regards,
Sami. -
Step Group , Monitoring Process and Integration Process.
Hi Experts,
I would like to when we use Step Group, Monitoring Process and what is the difference of these two with Integration Process. As we can use all the steps of Integration Process with Step Goup and Monitoring Process.
Regards,
SyedFor the Step Group:
You can consider it as a BPM which can be used in another BPM....concept similar to a reusable class :)....So if you have a constant patter of Receive --- transformation -
Send in some BPMs then create a Step Group and include it in the required BPMs...
http://help.sap.com/saphelp_nwpi71/helpdata/en/42/ef868be2753268e10000000a1553f6/frameset.htm
Regards,
Abhishek. -
Monitoring process chains: authorizations
Hi,
We have an issue about monitoring of BW process chains.
We have a support desk in our IT department doing first-level support on basically all our it systems.
The support desk have only limited SAP knowledge (they can do simple things like unlocking users, etc.).
Currently our BW developers are also responsible of day-to-day monitoring of BW process chains.
We would like to move this task to the support desk.
The support desk will be responsible of identifying problems and maybe doing simple corrective actions (restarting a process chain?).
In case of "real" problems the support desk will hand over the issue to our BW developers.
We have tried to create a role giving access to transaction rspcm for the support desk.
But we have not been able to restrict the authorizations.
From rspcm it is possible to go into process chain maintenance, and we would like to make sure that no one makes changes to the process chains by accident.
We would like to have a role giving "display only" access to monitoring process chains.
Anyone with experience in doing this?
/CasperHi Vijay,
We have tried adding only the transaction RSPCM (object S_TCODE) and the object S_RS_ADMWB as suggested by you.
The problem is that when "clicking" on a process chain in transaction RSPCM authorizations for transaction RSPC is required.
We have then added transaction RSPC to object S_TCODE.
When displaying the process chain, the user is not able to maintain info packages (this must be controlled by S_RS_ADMWB?).
But the user are still able to maintain the other process types (attribute change run as an example) ???
Are we missing another auth.object?
Best regards,
Casper -
Workflow tasks related to error processing when u201Cinvoices received via EDI"
Hi all,
Please tell me the process like how an workflow tasks related to error processing when u201Cinvoices received via EDI".
Give me in details the inform.
Thanks in advance
ChakriHi Sven,
Please implement SAP Note: 1321676 in your backend system to solve the current issue.
But later you will have to implement SAP Note: 1380788 also in your backend system to solve some other issues.
Regards,
Binson -
Relation between Inventory Process keys and movement types
Dear All,
Is there any way to find the relation between Inventory process keys (which is in SBIW-> Settings for Application specific data sources(PI) -->Logistics -->Settings for IBU Retail / CP --> Transaction key maintenance for SAP BW) and movement types .
Thanks in advance...
Regards,
RajuHi,
Please read the note below.
Note 353042 - Howto: Activate transaction key (PROCESSKEY)
It has something for you ....
The process key (0PROCESSKEY and 0BWAPPLNM) of the InfoSources has not been filled. As a result, no key figures are updated because of the update routine of the participating InfoCube and along with it no records are inserted into the InfoCube. In each update routine, the system checks the content of the PROCESSKEY. If this field has no contents, then no data is written into the InfoCube because of the IF condition in the update rules.
Solution
So that you can work in the above mentioned InfoSources, you MUST activate the determination of the process key. This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW (Transaction SBIW) in your attached R/3 source system.
Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0.
If you have already set up historical data (for example for testing purposes) by using the setup transactions (Statistical Setup Programs) (for example: Purchasing: Tx OLI3BW, material movements: OLI1BW) into the provided setup tables (for example: MC02M_0SCLSETUP, MC03BF0SETUP), you unfortunately have to delete this data (Tx LBWG). After you have chosen the industry sector by using MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'. Check, whether the system updates data into the involved InfoCubes now.
If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.
Hope this helps.
Raj -
Enabling alerts for Seeburger Monitor
Hello,
I would like to know if there is any way to enable alerts for errors in Seeburger Monitor?
There is a checkbox "Enable alerts" in AS2 adapter communication channel,I tried to check it,but it doesn't seem to be working.
Currently,we have to manually monitor Seeburger Workbench by scrolling down the screen having 100s of messages which is not convenient.Can this be automated?
Please let me know.
Thanks.
Regards,
ShwetaAccording to this thread: How to generate Alerts for Seeburger Workbench failed messages (and also according to the reference given therein) it is not possible to raise alerts in Seeburger Monitor.
Regards,
Abhsihek. -
No availability monitor defined in RZ20 error
Hi All,
I have configured NWA with the ABC system ( CEN system) with the monitored system XYZ. I am able to see all the reports, logs etc from ABC for XYX system through login to http://ABC-host:port/nwa.
But while going to monitoring -> availability i am getting the below error:
"No availability monitor defined in RZ20; check version of central monitoring system"
Please tell me where i am worng here.
Thanks,
RohanHi Chandra,
Both of the agent is running fine and i am able to test successfully in ABC (CEN) system) under RZ21.
But the problem is occuring in only NWA.
Thanks,
Rohan -
Documentation for Alerts in System Monitoring (DSWP)
Hello Community!
I am working with SAP Solution Manager for about a week. At the moment i am trying to set up a useful system monitoring with System Monitor.
Because i did not found a helpful documentation yet and i do not want to proceed in trail&error anymore - i want to know, if there is some kind of documentation for each standard alert in system monitoring function of the SolMa? For example "R3SysLog"-Alert complies with the results of tcode SM21.
Thanks for your answers in advance!Hi Helge,
Refer to the following thread :
[https://www.sdn.sap.com/irj/scn/thread?messageID=2309953#2309953]
Also,refer to the following URL:
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a751a1ec-0a01-0010-f0ba-89e4c5cd0261]
Hope this helps.
Regards,
Adren
Maybe you are looking for
-
Bom dia, Um usuário entrou no cadastro do item e mudou o método de avaliação para "Padrão" e deu entrada de uma qtd. Automaticamente a entrada ficou com o custo zero. Qdo vou fazer a saída ele informa q o item está sem custo, e não executa a saída.
-
Satellite P200-RT1 - FN keys don't work after downgrade to XP
Hi I have a Satellite P200-RT1, PSPBOC. I have downgraded my operating system from Vista to XP. Now I am having a driver issue, I have installed all of the drivers for my computer. I have installed all of the HotKey utilities for my computer as well
-
Passing table of varray to a procedure
Hi, I have a procedure which takes the following parameters: create or replace PROCEDURE VECTORSUMMARYSTATISTICS chartOption IN CHARTOPTION, userChoicedate IN C_TAB, AllCases IN boolean, strVector_id VARCHAR2, strEntityName VARCHAR2, CollectionName V
-
Use of scenario progression in THM80
Hi, Can you advise the steps that need to be taken to use scenario progression with THM80 please? We have setup regression analysis calculation type and obtain results when running THM80. We now wish to use Scenarios with this regression calculation
-
Voice Metrics and Radio Measurements
Ok, how do I use these exactly? We're running 4.1.185 on the controllers at the moment and 4.2.81.0 on WCS. First with the Voice metrics, I get no data on my 7920 and 7921 phones? And with the Radio Measurements if I attempt to use it with a client,