Alerts thru BPM

1)How do we raise Alerts in BPM..
2) What is the difference between Exceptional Handling and Alert Configuration..

Venkat,
>1)How do we raise Alerts in BPM..
This blog will help,
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
>2) What is the difference between Exceptional Handling and Alert Configuration..
If you are from a Java Background, Exception handling is just like the TRY-- CATCH block of Java. When any excetpion occurs, the excweption handler is triggered and you handle the corresponding exception.Similary , in BPM, exception handling allows you to define a set of steps that need to be executed in case, some exception / error occurs.

Similar Messages

How to raise alert in BPM

Hi Experts,
Please tell me how to raise alert using control step in BPM. What are the other steps to be used with control step for raising alerts?
Is CCMS Alerts and Alerts by BPM are same? If they are not the same, how they are different to each other?
my requirement is, simply i want to raise a mapping, data related errors by Alert.
in addition to it, i want to raise alerts for any failure in IE.
Could any one tell , what are the sequence of steps needed in BPM for the above requirement? Plz take a IDOC to FTP receiver scenario and explain me BPM steps.
thnx
RAMS

Hi rams
for more details refer these
refer these link for more details about Alert
For email alerts
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
You have to do SMTP Configuration for EMail and SMS.....
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
Alerts
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-stepCheck out these:
RWB- Alert Configuration LInk isnot working
Unable to login into Alert configuration
Get all the details here
CCMS ALERTS
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Alerts
transaction handling in XI
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Auto triggering of alerts
transaction handling in XI
SCOT
not sending email from alert inbox
See this link : http://help.sap.com/saphelp_nw70/helpdata/en/da/a3a7408f031414e10000000a1550b0/frameset.htm
heck this weblogs on creating them and troubleshooting:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Further reference
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
Also suggested go through the blog:Alerts with variables from the messages payload
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/ginger.gatling/blog/2005/12/02/innovative-ways-to-use-alerts
/people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
U may proceed in the following ways:
1. Reduce the securit settings of ur browser and enable the cookies
2. Try to SSO enable ur scenario
Have a look here:
SAP Note 840849
The configuration required as per ur patch level
SAP Note 913858
Check out these:
RWB- Alert Configuration LInk isnot working
Unable to login into Alert configuration
Thanks !!

Trying to get Descriptive Alerts in BPM using wlg4714

<a href="/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi:///people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Hi I am trying to get a descriptive BPM Alert as per the Weblog above.
But I am not good at Java UDF.
The UDF featured how/where do I put this coding.
Scenario
BPM transform step fails and throws exception BPM_ALERT.
Within the Exception branch I setup a transform message mapping for my message MY_MESSAGE to an error message type MY_ERROR.
Within the mapping message_type --> error_message_type graphical mapping
I have mapping to node error_text.
Do I create a UDF called triggerAlert context Queue
then add the code in here? what about ResultList...
IF it needs to be a compiled class. I have tried this in the SAP Web Developer Studio Tool to write class and compile but it is erroring and will not compile...
package AlertMessage;
public class triggerAlert {
 public static void triggerAlert(
 String alertSubject,
 String[] alertMessage) {
 String strAlert = new String();
 String strAlertXML = new String();
 ArrayList returnStr = new ArrayList();
 // split message if length more than 132.
 String newAlrtMsg = new String();
 int j = 0;
 for (int i = 0; i < alertMessage.length; i++) {
 newAlrtMsg = alertMessage;
 try {
 while (newAlrtMsg.length() > 130) {
 newAlrtMsg = newAlrtMsg.substring(130);
 j++;
 strAlertXML
 += "<item><ELEMENT>XI_ERROR_MESSAGE</ELEMENT><TAB_INDEX>"
 + (j)
 + "</TAB_INDEX><ELEMLENGTH>255</ELEMLENGTH><TYPE>C < / TYPE > < VALUE > "
 + newAlrtMsg
 + " < / VALUE > < / item > ";
 j++;
 strAlertXML
 += "<item><ELEMENT>XI_ERROR_MESSAGE</ELEMENT><TAB_INDEX>"
 + (j)
 + "</TAB_INDEX><ELEMLENGTH>255</ELEMLENGTH><TYPE>C < / TYPE > < VALUE > "
 + newAlrtMsg
 + " < / VALUE > < / item > ";
 } catch (Exception e) {
 System.out.println(newAlrtMsg + "" + e.getMessage());
 try {
 // Calling Alert RFC SALERT_CREATE
 Channel channel =
 LookupService.getChannel(
 "<XI_Servername>,XICommunicationChannelName");
 RfcAccessor accessor = LookupService.getRfcAccessor(channel);
 String rfcxml =
 "<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns0:SALERT_CREATE xmlns:ns0=\"urn:sap-com:document:sap:rfc:functions\"><IP_APPLICATION_GUID/><IP_CAT><AlertCategoryName></IP_CAT><IT_CONTAINER>"
 +"<item><ELEMENT>XI_ERROR_SUBJECT</ELEMENT><TAB_INDEX>000000</TAB_INDEX><ELEMLENGTH>255</ELEMLENGTH><TYPE>C</TYPE><VALUE><alertSubjectText>"
 "</VALUE></item>strAlertXML+ </IT_CONTAINER></ns0:SALERT_CREATE>";
 InputStream inputStream =
 new ByteArrayInputStream(rfcxml.getBytes());
 XmlPayload payload = LookupService.getXmlPayload(inputStream);
 Payload rfcOutPayload = null;
 rfcOutPayload = accessor.call(payload);
 } catch (com.sap.aii.mapping.lookup.LookupException e) {
 throw new RuntimeException(
 " Error in raising Alert: <CC_MMGlobal_RFCLookUp_Alert> Communication Channel lookup failed",
 e);
What to do, How to do it...
thanks,
V

Bhavesh,
I do go on...
Problem:- I have re-engineered a BPM to reduce long runtimes in Collect Scenario.
(1) Incoming to XI single xml messages --> collected in a folder on XI server.
(2) Trigger renaming of messages extension to *.xml in folder at specific time ie once daily.
(3) Receiving Communication Channel (type File) is first step in BPM gets triggered.
(4) BPM block 1 Receive step in loop collects messages (1,2,3...n) into multiline container of same type as messages.
(5) After 2 minutes Deadline Branch triggered.
(6) Ends Block 1 moves to Block 2
(7) Block 2 Transform Step of multiline container to single message type.
Simple mapping ie
<LIST> 1..unbounded --> <LIST> 1
<S_STX> --> <S_STX> 1..unbounded
message1 message1
<S_STX> <S_STX> 2..
<LIST>
<LIST>
<S_STX>
message2
<S_STX>
<LIST> --> <LIST>
(8) Send step Single Message mapped using BIC Mapping to a Report XSLT Template.
If the process is successful then I get in XML message Monitor an entry and a payload. Of the concatenated messages.
If the process has an error the users want to be told about it as soon as possible hence I set up Alerting. Which works.
But on running a test scenario where message3 (structure is incorrect) at Step (7) the BPM throws the Alert correctly (no information passed as to error) and the Workflow Finishes.
In XML message Monitor the result is message1 is Greenflag. Message2, and Message3 are chequered flag.
No Message Payload generated from the BPM.
The users are not happy with this nor am I.
(1) I look at Workflow Log of BPM and see that step(7) the transformation step has information in the container elements MAPPING and TRACE (no way to reference these from BPM I know of).
(2) I read blogs etc and discover I should perhaps try to add more steps to my Exception/Alert Branch to try to deliver a Payload so the XML message Monitor shows something. Is this a correct assumption?
(3) I try to make my Alert message more informative but I am not skilled in what information is available to identify the error. The Workflow Container is not enough.
If I add a container operation to instantiate a container variable I would like to grab the Payload at least of the multiline element.
(4) To produce a Payload in the Exception Branch to output from the multiline element do I have to do a Loop and Container Operation to Split the multiline message up again into individual messages to send out to an error folder.
(5) I am trying to make it easier for the users to find the errorred files than searching through the Archive folder from the initial receive step.
(6) I am trying to stretch my knowledge of XI Error reporting so I can deliver a better solution to the users.
(7) I have some Java Skills from 10 years ago when life was simpler hence very rusty and am finding it difficult to fit it into the context of UDF's (what information can be accessed etc).
I hope this is clearer about my self made problem. I should never have mentioned error messaging to the users...
thanks,
V

Issue with Alerts using BPM : Trigerred for Successful messages also

Hi Everybody,
I am working on configuring Alerts using BPM.
I have followed the below blog by Micheal.
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
In BPM after the receive step I have used container and control steps to capture the Idoc Number as mentioned in the blog.
I am facing an issue with it now as an Alert message is send to my Inbox even when the message is succesfully processed by the adapter.
This is a strange behaviour when we talk about Alerts.
Can somebody help me out in this?
Thanks & Regards,
Zabiulla

Hi Zabiulla,
Michal explained just the basic, the logic of your process is to build by yourself. Usually an alert will be raised inside of an exception branch. You can define exceptions for critical operations, f.e. send steps or transformations, the exception will be catched by jumping to the exception branch, where you can store a suitable reaction - f.e. an alert.
Regards,
Udo

Raise Alerts for BPM errors

Hi Experts,
I have a BPM, from which need to raise Alerts for Mapping error.
is it possible to raise alerts using Alert rule and with out throwing alerts from BPM.
Thank you,
MK

Hi MK
The SAP Computing Center Management System (CCMS) provides a special alert monitor for SAP Exchange Infrastructure.
You use this alert monitor to monitor the ABAP and Java components (including the Business Process Engine) of your Exchange Infrastructure centrally, and to identify different categories of system errors and application errors in the various interfaces and interface namespaces of the components involved.
You use the alert configuration to have the system inform you of errors during message processing. You can receive the alert by e-mail, fax, or SMS. In each case you will also find the alert in your alert inbox.
To configure your alerts, proceed as follows:
● Create the alert categories that you want to use in your alert rules.
● Create the alert rules in which you want to use your alert categories.
● You can configure a connection to CCMS and schedule the periodic transfer of alerts to CCMS.
Once you have configured the connection to CCMS, choose Show CCMS Connection, select a period, and start the periodic transfer.
A background job is scheduled that collects all unprocessed alerts and forwards the data to CCMS. You can also stop this job.
As soon as a particular threshold value is reached, or is exceeded alerts are triggered and The transferred data is displayed in a special CCMS monitor.
You can raise alerts through BPM also .you can design your BPM in such a way that if an exception occurs, the exception handler for it has a control step in which youu can throw alert specifying the alert category and the text.
For more information on alert configuration and CCMS you can refer to http://help.sap.com/saphelp_nw2004s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
hope it may help you
Thanks
Sandeep
PS: if helpful reward points

How to Configure SOST Failed Alert in BPM

Hello ,
How to Configure SOST Failed Alert in BPM ?
Please let me know..
Many Thanks,
Sivaram

Hello ,
How to Configure SOST Failed Alert in BPM ?
Please let me know..
Many Thanks,
Sivaram

Trigering alert without BPM

Hi,
I can trigger an alert when we get an error message .
I would like to trigger an alert without BPM when we receive an acknowledgement succesfully from the legacy system.
Thanks,
Sharmila

Hi,
go through this links...
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
regards,
Ansar.

Anyone know how to customize email subject generated by Alerts from BPM

I'm generating Alerts from BPM. However, the Alerts generated this way has subject title with - Process and an id number like this 'Process 000000126930'.
I want to create custom subject line / email title.
I tried by creating and using container variables in the Alert category for the title and it did not work.
Any ideas on how to do this.
Thank you,
Parimala

Hi Parimala,
You can use the external definition Mail strcuture (Mail.xsd) provided by SAP for XI. You can map your structure with the Mail structure where you can create any subject line and any content as well, depending upon your interface configuration.
Pls find the attached, Mail.xsd. Customize the subject, to, from etc. fields and populate the content branch element to send any message via the email.
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema targetNamespace="http://sap.com/xi/XI/Mail/30" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/XI/Mail/30">
<xsd:element name="Mail">
 <xsd:annotation>
 <xsd:documentation>Mail package for XI - Mail Adapter</xsd:documentation>
 </xsd:annotation>
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="Subject" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
 <xsd:element name="From" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
 <xsd:element name="To" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
 <xsd:element name="Reply_To" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
 <xsd:element name="Content_Type" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
 <xsd:element name="Date" type="xsd:dateTime" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
 <xsd:element name="Message_ID" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
 <xsd:element name="X_Mailer" type="xsd:string" minOccurs="0" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
 <xsd:element name="Content" minOccurs="0">
 <xsd:annotation>
 </xsd:annotation>
 </xsd:element>
 </xsd:sequence>
 <xsd:attribute name="encoding" type="xsd:string" />
 </xsd:complexType>
</xsd:element>
</xsd:schema>
Hope this helps, pls let me know if you need further info.
Cheers,
Ranjan

Alerts from BPM Email Subject and From address should be changed.

Hi All,
I'm raising an alert from BPM by using Container operation and Control steps.
The below details are appearing in the Email. Is there any way to change these standard steps... ?
From:     WF-BATCH at K.local
To:         SAPSupport at k.com
Subject: Process 000000021589
Alert ID:   ##00010##
I want to change the
- Subject name with my own subject line.
- From address should be changed to it.helpdesk at k.com instead of WF-BATCH at k.com
- I checked in some of the threads, looks like there is limitation in terms of characters in the Email body(127 characters)? Is there anything I can do to extend the email body?
Kindly suggest me.
Thanks
Deepthi

Hi Baskar,
// You can pretty much change the subject title and recipient information easily. Click on fixed recipients to modify mail address.
Recipients list is fine. I can change. How about the Sender Email address?
Ex: WF-BATCH.. Since the errors are generated from BPM, the sender userid will be always WF-BATCH.
I want to change this user id into my custom user id.. is it possible?
2. Also I enabled Dynamic Text in alert category which is used to get the dynamic text from mapping.. Hence i cannot use Short and Long texts tab in Alert Category to generate the subject line.
Hence Subject line is coming with process ID, looks like I cannot change?
Thanks

Regarding Email alerts Using BPM

Hi All,
i need to send an Email Alert through using BPM here is the scenario where customer is entering some data which is coming thru Web Service to XI,
1) so here i have to validate the customer using SQL Database if customer exists then it should proceed further or else it should raise an alert.
2)Once its validated it should go thru another division check from SQL database, Based on the division if we have it as 00 then order should be created in R3 server or if is 10 the it should be created in SQL Server.
3)If no division exists an alert should be raised.
i just need to know the that for this above scenarios how many Alert category should i have to make
or
is it possible to create only one alert category to raise this two Email Alerts pls suggest ...............
Thnks you
Azeez khan.

Hi All,
Thanks for the quick responces,
I have created all the steps required to send an Alert using the given Above blogs here i am facing some issues like
1) in properties tab of the BPM were we have a options like Alert Category
Alert Desception
here my doubt is can i give the same Alert category to the Above two conditions as per my Scenario ABove ie
For Validation Alert & Division Check .
And also here we are using BPM so is it necessary for me to write An java codes for the Above Requriments
Kindly guide me if i am mistaken .
Regards,
Azeez khan .

Using Standard Container Variables in Email Alerts from BPM

Dear All
While creating alert categories from ALRTCATDEF we have a Long Text Tab where we can use Container Variables like SXMS_MSG_GUID ,SXMS_RULE_NAME, SXMS_ERROR_CAT , SXMS_ERROR_CODE etc create the mail contents. We can also display the message passed by the BPM by using the variable
ALERTDYNAMIC_SHORTTEXT , ALERTDYNAMIC_LONGTEXT .
In my case when I call the alert category from the BPM , the message passed by the BPM is displayed through the ALERTDYNAMIC_LONGTEXT in the alert inbox , but I am not able to utilize the other container variables (like SXMS_MSG_GUID ,SXMS_RULE_NAME, SXMS_ERROR_CAT ) for displaying the messageid ,error category etc. Using these variables for alerts invoked from BPM results in Blank Values for all the container variables.
If the alert is not invoked from BPM these variables are getting populated.
My question is is there a way by which we can utilize these variables for Alerts thrown from BPM.
regards
Nilesh .

hi check the below links for reference:
http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
http://rant03.ranffm.de:50000/rwb_mdt/detailsservlet?objectName=name=is.00.rant03,type=XIIntegrationServer&rwb=true&XIDomain=domain.00.rant03&archive=false&selectMessage=%SXMS_MSG_GUID%
note:reward points if solution found helpfull.....
regards
chandrakanth.k

Alert in BPM not triggered anymore

Hello,
I have a strange behavior in my integration process. I defined an alert category in ALRTCATDEF and in my BPM I trigger an alert using that defined category.
This worked fine so far, but after making some non alert-related changes in the process and reactivating it, no more alerts are visible using report RSALERTDISP. Even when rolling back the history to a process version that already worked no more alerts are received.
Checking the workflow log I can see that the alert step is executed successfully "Triggers a process alert in the background" : --> Step completed.
What I have seen however is that in the list with technical details the ALERT_ID in the container is 00000. In earlier tests there was always a value assigned.
Could this be a reason or are there any limitations on the max. number of alerts that can be sent?
Any help is highly appreciated.

This worked fine so far, but after making some non alert-related changes in the process and reactivating it, no more alerts
are visible using report RSALERTDISP. Even when rolling back the history to a process version that already worked no more
alerts are received.
Did you checked the return code of your IP in SXI_CACHE after activating the changes?
Also do a check on the BPM in IR....F7...and see if there are any warning messages.
There is no limit on the number of alerts that can be raised....just that you should have unchecked Suppress Multiple Alerts option in RWB and Alert Rule should be active
Regards,
Abhishek.

Alert for BPM Transformation Step

Hi I am trying to think of a way to get the information from my alert transformation step into my Alert Message.
The scenario is a multiline container called XML_Collect mapping to XML_Output a single container with the XML messages merged.
If I encounter an error with mapping, currently I am raising an Alert with Process <Process ID> and Long Text Transformation Failure.
I have the Transform step in a Block and an exception branch for the Alert. I am going to instigate a Container Operation step to fill my Container variables with information about the error.
In the BPM Workflow Log I can see the Transformation1 Container Instance with variables such a MAPPING and MESSAGES_IN and _EXCEPTIONS in it.
Can I reference this container in my Container Operation.
Ideally I would like to know which XML message from the multiline container generated the mapping error. This would help in correcting.
I have read some information on a UDF calling Alerts but I am not sure if this is the method to use.
thanks,

It is MESSAGES_IN
We have
MAPPING MAPPING http://<company>.com/msghdr IM_T_MSGHDR_V3_to_T_MSGHDR_V3_Multi-<...>-1-
TRACE <?xml version="1.0" encoding="utf-8" ?>
<MappingTrace><Trace level="1" type="T">Mapping-Namespace:http://company.com/msghdr </Trace>
<Trace level="1" type="T">Mapping-Name:IM_T_MSGHDR_V3_to_T_MSGHDR_V3_Multi </Trace>
<Trace level="1" type="T">Mapping- ...
This trace is what appears in the XML trace also
MESSAGES_IN MESSAGES_IN < 1 Entry >
MESSAGES_IN[1] MESSAGES_IN[1] 0000000001-<...>
 NUMB Parameter ID 0000000001
 MESSAGES MESSAGES < 3 Entries >
XC ZXI_PROXY_MI_MSGHDR_V3_0001 E0630F307D7B11DCA23700145E6916E5
XC ZXI_PROXY_MI_MSGHDR_V3_0001 E035BDA07D7B11DCB90500145E6916E5
XC ZXI_PROXY_MI_MSGHDR_V3_0001 BA2A92307D7511DCB09900145E6916E5
then the XML Header and Payload.
_EXCEPTIONS _EXCEPTIONS < 3 Entries >
_EXCEPTIONS[1] EXCEPTIONS[1] Component MAPPING has reported an error-The exception occurred (program: CLSW..
_EXCEPTIONS[2] EXCEPTIONS[2] com/sap/xi/tf/MM_T_MSGHDR_V3_to_T_MSGHDR_V3_Mult~com.sap.aii.utilxi.misc.api...
I have just tried the variable &_WORKITEM.WORKITEMID& and this gives the work item ID of the starting step for the Process.
My MESSAGE_ID variable that I am updating with the container variable straight after the Transformation step has the first message id from the multiline container but I know this isn't my incorrect message.

Alert in BPM

Hi Guys,
I have some alerts which will trigger at IE level,adapter level and one with BPE.All the alerts are working fine except the alert from Control step of BPM.
My Alerts from Adpater and IE level has the Subject as i specified in ALRTCATDEF, server url to identify from which System(DEV/QA/PROD) the alert is thrown from in the bottom of the email.
But the Alert from Control step of the BPM has subject : Process 000050054034 and mail content with error,but i am not able to identify from which system this particular alert is thrown from.My question is Why Subject is changed and no url in the email?
Thanks
Prabhakar

No cross posting
Read the "Rules of Engagement"
Regards
Juan

Message in Alert from BPM

Hello
I have control step that sends Alert. The messasage contains BPM containers as &varilable&.
Alert catergory has been defined in ALRTCATDEF with Workflow type but I don't see a message from BPM in Alert Inbox.
What do I need to add into my alert category in order the message is to be displayed in Alert Inbox?

Hi,
I have the same problem as Denis. I created an alert category with dynamic text. As alert classification I have set WEBFLOW (this type wasn't part of the standard classifications, so i created it). In my BPM I trigger the alert within a control step. The alert is thrown, I can see it in the alert inbox, but without description an without long text. As short text I see the name of the category and the string "(Die auslösende Anwendung hat Sie als Empfänger bestimmt)".
Can anybody help to fix my problem?
@Denis: Have you solved your problem? How?
Regards,
Thomas

Alerts thru BPM

Similar Messages

Maybe you are looking for