Alesis Firewire Multimix 12 - GB "08 works fine -any problems going to '09?

I've been sitting on this iLife '09 box for a while until things seems to shake out, which seems to be the case. Anyone have a different take? Snow Leopard is a different matter, but if you want to share, I'm happy to listen. My interest is in Alesis specifically. mike

isteveus wrote:
I've been using a Firewire Multimix 8 with 09 and snow leopard no problems what so ever.
Is that really the case? I had heard that the Firewire drivers for the MultiMix 8 were not compatible with Snow Leopard. I have been holding off upgrading my production Mac for that reason alone. I've been waiting for Alesis to update their drivers for Snow Leopard.
If I can be assured that the existing driver (dating back to January 2008) works fine under Snow Leopard, perhaps I will apply the 10.6 upgrade to my main machine.

Similar Messages

System Connection Test was not fully tested but all web dynpro java app and Transaction iviews working fine.Any problem for this Kind of activity Lets give some idea.

System Connection Tests
You can test the connectivity to the backend application represented by the current system object. Choose the relevant tests.
Note: The test is based on the properties currently defined in the system object. It does not check if the system properties are correct.
System Connection Tests
Test Name
Description
Status
SAP Web AS Connection
Tests the connection to an SAP Web Application Server
ITS Connection
Tests the connection to an SAP ITS server
Connection Test for Connectors
Tests the connection to a backend system using an associated connector
Test
Clear Results
Results
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name
5. The host name ssprdxi.stylespasapnet.com was resolved successfully.
6. The Web AS ping service was pinged successfully.
7. An HTTP/S connection to was obtained successfully.
ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name ()
6. The host name ssprdxi.stylespasapnet.com was resolved successfully.
7. An HTTP/S connection to was obtained successfully.
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
regards
Antony

Hi Stefan,
This correct see SAP Note [947081|https://service.sap.com/sap/support/notes/947081]
If the locale for the Web Dynpro iView is changed in the portal (through portal personalization), this is not reflected in the running login session. The user needs to logoff and login again, in order to see the locale change in the Web Dynpro iView.
Regards,
Leo

I have a new ipad and had facetime working and now when I try to facetime it says unavailable. Wifi is working fine, any suggestions?

Hi I have a new ipad and had facetime working and now when I try to facetime it says unavailable. Wifi is working fine, any suggestions? thanks

Please read Chapter 2.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

My Mac suddenly started getting a pop up message saying "There was a problem conecting to the server. URLs with the type "file" are not supported." My internet is working fine,no problem connecting. I just keep getting this message which I click off .

My Mac suddenly started getting a pop up message saying "There was a problem conecting to the server. URLs with the type "file" are not supported." My internet is working fine,no problem connecting. I just keep getting this message which I click off and continue working.

Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Original Cisco GLC-GE-100FX gbics are not working in WS-C3560CG-8PC-S while Third-Party gbics work without any problems

Hi all,
i have a gbic problem with my WS-C3560CG-8PC-S.
My original 100FX gbics are not working
Mar 30 01:28:41.575: %PHY-4-SFP_NOT_SUPPORTED: The SFP in Gi0/10 is not supported
Mar 30 01:28:41.575: %PM-4-ERR_DISABLE: gbic-invalid error detected on Gi0/10, putting Gi0/10 in err-disable state
100FX Third-Party Gbics are working without any problems.
NAME: "GigabitEthernet0/9", DESCR: "100BaseFX-FE SFP"
PID: Unspecified , VID: , SN: AFFxxxxx
What can i do?
I tried different firmware versions (12.2 and 15.2(1)E3)
I also tried the "service unsupported-transceiver" command.
It still does not work with 8 Switches and 16 original gbics :(

GLC-GE-100FX and GLC-T is not supported as documented in the 3560C Data Sheet.
You could try contacting your Cisco SE/AM and request for a Product Enhancement Request (PER).

Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

I've done some research on the SQLite database. Whenever Aperture hangs up (like during auto-stack or opening the filter hud) there are thousands of SQLite queries happening. These SQLite queries cause massive file I/O because the database is stored on the disk as 1kb pages. However, the OS is caching the database file; mine's only 12MB. I'm trying to track down some performance numbers for SQLite on osx but having trouble.
It's starting to look like most of the speed problems are in the libraries that Aperture uses instead of the actual Aperture code. Of course, that doesn't completely let the developers off the hook since they choose to use them in the first place.
Oh, and if anyone is curious, the database is completely open to queries using the command line sqlite3 tool. Here's the language reference http://www.sqlite.org/lang.html
Hmm, just found this. Looks like someone else has been playing around in the db http://www.majid.info/mylos/stories/2005/12/01/apertureInternals.html
Dual 1.8 G5 Mac OS X (10.4.3) 1GB RAM, Sony Artisan Monitor, Sony HC-1 HD Camera

Firefox won't load any web site under my login, if I use another account it works fine, this problem start with 7.01 update. I have 8.0 now, other browser works fine with no problem.

unable to load any web site, no error message, just a blank page.
safari and chrome work fine, in fact I am using chrome to type this up. This problem only limited to my account, I have created other account and firefox work as it should with no problem. I am unsure with else to clear to get firefox working again.

Update: This is NOT just related to "Yahoo" pages, while this problem first began with some of my Yahoo pages, it is now also happening with other NON Yahoo things I want to load up. Like Twitter, or Links in emails that load Blank, or even images within emails that show up Blank in the preview part of Yahoo mail. It is NOT a Yahoo issue as I have loaded up my Yahoo Mail in IE and Chrome, and everything loads wonderfully. I can even load up sites like Twitter, and other websites that will NOT load in Firefox, but they come up fine in other Browsers.
I have done the ONLY suggestion that came from Firefox Tech support, to load up FF in Safe Mode, but the problems still exists. I have uninstalled FF and re-loaded it, but the same problem is there.
Does anyone have any ideas here at all? I can't seem to get any Fire Fox help, so I am reaching out to the community here to see if anyone can help.... Thank you !!

SBRIO slot 1 thermocouple module 9213 not detected on aluminum plate, while in other 2 slots working fine, any reason ?

Hi,
i have a peculiar problem,
I have a sbrio 9642XT mounted on an aluminum plate (also connected to earth ground) along with 9213 thermocouple on slot 1 and 9477 digital out module on slot 3.
previously this setup used to be on an acryllic plastic plate. and now when i shifted to the aluminum plate the thermocouple module is not being detected by labview project under chasis, while the 9477 is still being detected.at slot 3
i placed an analog inpt 9205 module on slot 1 just to see if there is a problem with slot 1, and yes the new module is also not detected on slot 1,
so placed it on slot 2 and now the thermocouple module is detected and works fine on slot 2.
the attached picture shows the Ungrounded T- type of Thermocouple Probes that I use , these are immersed in ice water and in some other inert liquids to read the temperature
so my question is, is the problem related to grounding issue caused by liquids and did it ruin the slot of the SBRIO some how or is the sbrio just got faulty after using for an year. or is it got something to do with the mounting on aluminum plate (earth ground)
also i never used slot 2 before.
is there a way to test in any other way to know if the slot 1 is ruined because of the above reasons or is it a software issue
i dont want to ruin the slot 2 of the sbrio by placing that thermocouple module. please help
many thanks,
Attachments:
thermocouple picture.pdf ‏105 KB

Hi Freemason,
Nothing you have described should be causing a slot to stop working; as long as the sbRIO is properly mounted and not touching the backplane, it shouldn't be a problem. If your slot 1 is not working, you could also send the board in to National Instruments for repair. Are you still under warranty?

Can't browse internet on ipad2, but laptops works fine - any ideas?

Have a weird problem surfing the internet with my ipad2 that started out of the blue a few days ago. Everything had been working fine up until then and I don't remember changing anything or updating new software...
Can't browse the internet on the ipad anymore, and when i point browser at website, it thinks for awhile then brings up an earthlink page (my ISP). Still receives mail/twitter though, so some data is coming through, but facebook app isn't working. And my 2 laptops connect fine, full on browsing. Also seems like my wife's new iphone is having the same problem, starting at same time.
I really have no idea - anyone heard of this?

Try going to Settings > Safari> Clear History, Cookies, Cache on the iPad. If that doesn't work then do a reboot of the device by pressing and holding the on/off and home buttons simultaneously until the screen goes blank and you see the apple logo. It should take about 10-15 seconds to reboot.

I have recently encountered a problem when trying to access 3G network from IPAD2. Wireless access working fine. When going on safari it attempts to access page and then comes up with message that 'server stopped responding'. I have tried resetting.

I am unable to access 3G network, although wireless access is working fine. When opening a page in safari it churns for a while and then says that server has stopped responding. I noticed on one forum that it said something about changing brightness settings causing a conflict - coincidentally this first started happening after I had tweaked brightness. I have tried resets etc, but still no joy. Any ideas?

Hi there humph86,
You may find the troubleshooting steps in the article below helpful.
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
-Griff W.

Publishing to MM works fine, visiting site goes to old domain.

I had a website that I deleted from my iWeb, and created a new website on MM. I can publish the site just fine, but the button to publish the site goes to olddomain/MMUsername/website. The RSS subscribe button points to olddomain/MMUsername/rss.xml. If I publish to a folder on disk, everything works fine.
On the site publishing settings (mobile me) The MM account reads:
Mobile Me Account: [email protected] (olddomain.com)
After Mobile Me Account: it is all gray and you can't edit it.
I have studied posts for three hours, and have purged preferences, caches, etc., but I can't get rid of the olddomain.com.
Any help would be appreciated.
Steve

H Zak,
Thanks for the reply. I've tried with those settings but with now joy I'm afraid. I've used:
And get:
Clicking OK gives the following error:
I don't understand since the folder zest-graphics.co.uk resides inside my public_HTML, as below:
Any ideas? Appreciate your help with this, thank you.
Neil.

Airport express (802.11n) in client mode: works fine but problem

Hi,
I use the airport express in client mode on my existing wireless network (router netgear dg834n and macbook pro).
The client mode works fine: I have connected it to my existing network with WPA2 security system and also mac adress filtering in the router.
I also have connected the Airport express via ethernet to my satellite receiver and it is always connected without interruption, and always green.
BUT
i always lose the possibility to use airtunes. I mean: When I go to itunes or if I try to connect to the airport interface, I can't. I have to plug it off from electricity, and plug it on again, wait the connection, and I can have access and use itunes. Then, If my Mac goes into sleep mode and then wake up again, I lose the airtunes connection and the connection to the interface. Meanwhile, the light is still green and my sat receiver connected.
Please help me!
Thanks
Moda

Instead of using WDS, you should take advantage of the "Allow this network to be extended" option that is available for the 802.11n AirPorts including the TC. WDS only operates in the 802.11g radio mode.
Here's the basic setup:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility).

Any problems going from Japanese to English version of LabView?

I would like to convert some vi's that were developed with the Japanese version of LV to English. Has anyone done this? Any tips?

LabVIEW was converted from English to Japanese. I do not think there would be an problems going the other way (provided you know Japanese). There are a couple of examples on the web for converting VIs between languages. Start you search on the advanced search page: www.ni.com >> support >> advanced search (it is at the bottom--click on the words).
Jeremy

I can't import mp4 files onto my ipad originally from my panasonic camcorder. files from my 'bloggie' work fine. any help available please?

I can't seem to import video files which originated from my panasionic camcorder (mp4) although windows will play them. my 'bloggie' files import ok. I note there is advice on converting to ipad version but I can't get this to happen.
any advice appreciated
thanks

Try:
iOS: Unable to import photos or device not recognized as a camera

Firefox does not load the iframes until i refresh the page once i refresh the page it does work fine any idea y its so.....

when i refresh the page all the details rellated to product is loading fine..the page contains two iframes with different src...the src for iframes is being provided from javascript

Greasemonkey has a file which has metadata on your installed scripts. I remember looking at it once when there was a controversy about updates, but I don't know how to mine it for data.
What happens if you exit Firefox and startup in your old profile and install GM 1.14 beta? Does that rescue your original setup?

Alesis Firewire Multimix 12 - GB "08 works fine -any problems going to '09?

Similar Messages

Maybe you are looking for