Alesis Multimix FIREWIRE question

I have an alesis multimix 12 FIREWIRE which is FIREWIRE 400. it was working fine on my PC. now I have a new iMAC and it only has 1 firewire 800 port. I bought a 400 to 800 firewire cable and tested the cable with a FIREWIRE 400 hard drive and it works fine. HOWEVER, when I plug it into the ALESIS MULTIMIX FIREWIRE, it doesnt work. it doesnt show up in system profile or in the alesis multimix control panel. I could only find one discussion about it which said somethng about not getting enough power to the device when you use s 800 to 400 cable. However, there was no solution. is there anything I can do to get this working or am I stuck and need to invest in something new (Thanks Apple)
.. Please help ... Dave

If I use the 400 to 800 cable for the hard drive itself, the hard drive works. I the hard drive only has one regular sized firewire 400 port and one mini firewore port. I took a cable that goes from regular firewire 400 to mini firewire 400 and it didnt see the alesis multimix. I called ALESIS and they tell me it should work but couldnt tell me how . they told me they need to investigate and will get back to me. Any other ideas?

Similar Messages

GB2 & Alesis MultiMix Firewire Problem

I just purchased an Alesis MultiMix Firewire mixer to use with Garageband 2.
As a mixer, everything works fine, apart from the firewire.
When I connect the mixer to my PowerBook G4 (10.3.9) via firewire, Garageband and Audio / MIDI Setup see the firewire mixer. I had no problem recording via the firewire connection. My problem is when I try to play back the Garageband recording through the mixer via firewire. The output is distorted and choppy.
Next I tried playing something that I recorded before I got the mixer (to determine if it's an input or output problem). This played back distorted and choppy.
Next I didn't use the mixer but routed the GarageBand's output through the PowerBook's built-in audio. It played fine.
I also tried a different firewire cable and powering both the mixer and computer up and down many times inbetween. Nothing changed.
So I know the problem has to do with the Garageband output through the mixer.
One thing I thought was curious was that the mixer worked at 24 bit and GarageBand works at 16 bit. Could this be the problem? I couldn't find any way to configure the mixer to work at 16 bit.
Anyways, any help would be very appreciated.
Thanks,
LeonD
PowerBook G4 Mac OS X (10.3.9)

Well I've been on the phone twice with Alesis today. They basically had me try all the things I tried on my own. At one point, they thought I had a defective unit so I brought it back and traded it for another one. The second one did sound a little better but it still was not useable.
One of the tech was using a 12" PB and said his worked. I tried with a 15" and 17" PB. I also have a 12" iBook. I tried that and it also didn't work.
Alesis is not giving up. They gave me one thing to try and said if it didn't work, to call back tomorrow. I actually live near Alesis and offered to bring my gear in and have them look at it first hand. They declined saying they weren't set up for that.
The oddest thing today was right before I called them the first time, I tried playing back via the mixer and it worked. I didn't believe it. I tried both GarageBand and Cubase. Then just to make sure, I shut everything down and started back up again. My problem was back and I haven't been able to make it work again.
Recording shouldn't be this hard,
LeonD

Help needed in getting my Alesis Multimix Firewire 16 to work with Audition CS6

I've just bought a new Fujitsu AH 532 Lifebook Laptop with a Windows 8, 64 bit OS. I've installed my Adobe Audition CS6 on it and I've connected my Alesis Multimix 16 Firewire to it via my StarTech 34mm Firewire Express Card which has a Texas Instrument Chipset. AA CS6 sees the mixer but only allows a stereo track input but it also does not want to record. I've attached some images of the audio channel mapping, audio hardware setup, and also the multitrack recording view. Also I'm using the Alesis Windows 7 driver for the mixer. You will also see that I cannot select the sample rate in the audio hardware setup panel, the sample rate is stuck on zero. In the multitrack view there's no signal when I press the record button.
All suggestions and help will be highly appreciated.
Regards,
Donovan.

It's probably nothing but this is from the Windows Dev Center
"In Windows Vista, Windows Server 2003, Windows XP, Windows 2000, Windows Millennium Edition (Me), and Windows 98, audio drivers conform to the Windows Driver Model (WDM) and make use of the kernel streaming (KS) components, which operate in kernel mode and are part of the operating system."
I don't see any mention of Windows 8 - maybe nothing?
Just a thought - why not try the asio4all driver just to see if it makes a difference?
You can install it and then select that driver in Audition - you can always switch back
http://www.asio4all.com/

Alesis Multimix Firewire

OK, I looked this stuff up and nobody has answered the questions with enough detail for me to make an informed purchase...
I am looking into purchasing a Alesis Multimix8 Firewire. My question is this:
Can I record one track per channel at the same time with this thing? You know like record 8 tracks at the same time?
That's all I need to know really.

Yes.

Anyone using an Alesis Multimix Firewire 8 mixer?

I'm thinking of getting one to use with Garageband. Just wondering if anyone is using one and if it works with a G3 ibook. Their literature says that you need a G4, but I'm wondering if this is true. I've had my G3 work just fine with other min g4 hardware.

Have you had your G3 work fine with Apple software where Apple states the requirement with a G4 processor as a minimum?
I would suggest asking the question in the GarageBand Forum. I think most of us who are using G3 iBooks take Apple at their word, and do not attempt to use GarageBand with a G3 processor, at least I do. Those who use GarageBand will likely be able to advise you better than those who post in this forum.

Alesis Multimix !6 Firewire with logic express 7

Hi,
I just recently bought the alesis multimix 16 firewire and i wish to record using logic express 7. I cannot figure out how to set it up so i can record.I am fairly new to the whole logic software......If someone could help me that would be great

Hi Mike,
Logic is not a toy so you should read at least the getting started manual to understand how the program is structured.
About your question, I don't know if the multimix is straightly recognized or if a driver from Alesis is required.
Pleae give me more details about your problem and I'll be glad to help you.
cheers
rob

Logic 9.17, Mountain Lion, and Alesis MultiMix 16 Firewire compatibility?

Does anybody know if the Alesis MultiMix 16 fire wire audio interface/mixer works with Mountain Lion and Logic 9.17 ? Any info would be helpful.
Thank You

Andyh56,
I am trying to set up my multimix 8 firewire in logic express 8 right now.
Could you email me and help me out please!!
Thanks,
-Brock
[email protected]

Adobe Audition CS6 and Alesis Multimix 8 Firewire choppy playback

I recorded a whole podcast using both Adobe Audition CS6 and Alesis Multimix 8 Firewire, and I originally played it back it was fine. Now after a week I play it back in Adobe Audition and the dialogue is choppy and repeating itself constantly every second. When I export it in a multitrack mixdown as a WAV file it still does the same choppy repeating thing. Has anyone else run into this problem who has a fix?
Thanks!

I don't use any Alesis products but have heard rumours in another forum that they're having some driver issues.
Maybe as an experiment you could export to a wave file and try playing that through your internal sound card rather than the Multimix. If playback is clean when not involving the Multimix that may suggest the problem lies in the Alesis gear. If the skipping is still there then something is likely going on within Audition.

Adobe Audition CS6 and Alesis Multimix 8 Firewire multitrack problem

I have the Alesis Multimix 8 Firewire mixer and am using Adobe Audition CS6 for my recording program.
I'm trying to connect 4 microphones via XLR and have them run in individual channels in Audition but I can't get more than 2 to show up on the program even though I have 3 plugged in right now. On top of that, I have to run input 1 and input 2 as mono channels instead of stereo channels to get it to work at all.
I'm looking to do a Podcast with my set up, is there a better program to use to record and edit? Or am I missing a driver for Audition or the Multi Mix?
Thanks!

Well, first the easy bit. Microphones ARE mono devices so using mono channels is absolutely correct.
Beyond that, you mention drivers. There are no special drivers for Audition but it is worth going to http://www.alesis.com/multimix8firewire to see if there are any driver updates for your mixer.
You don't mention what Operating System you're using but whichever it is, you should go to the Audio Setup page for Windows (i.e. not in Audition) and make sure it's detecting all the channels from the Alesis properly. You may have to set the Alesis as your default audio device for this.
On the Edit/Preferences/Audio Hardware Setup menu in Audition, make sure you have the proper device type selected--I'd guess ASIO for a start. Make sure your Alesis is selected as the default hardware.
On the Edit/Preferences/Audio Channel Mapping menu, make sure you can see all the channels from your Alesis.
Finally, on the Multitrack screen, set the Input for each track to be the appropriate channel from the Alesis. If you're going to do this regularly, I recommend you get everything set up then save it as a Session template.
And I can't think of anything better than Audition for what you want to do...that's why it's used in thousands of radio stations around the world!

Firewire issue with Alesis Multimix

Hello, I have an iMac 10.6.4. I have been trying with no success to hook up (via firewire) to the Alesis Multimix 8. I also have the Tascam 1804. I downloaded the correct drivers for each source. Followed all directions such as turning units off and restarting. For some reason, it seems the iMac does not see either of the units. I have been alternating the units several times, removing and re-installing the drivers. Yet, I cannot see the either unit in hardware overview, nor in Logic Express. I am using a new firewire 9 pin to 6 pin cable. When I click on the icon for the Alesis unit, I get a message saying "Alesis Firwire, no devices found, connect devices" The Alesis does not show in Logic Express either. As far as the Tascam is concerned, their message states, FW1804 not available. It seems the iMac just does not recognize any of these units. Can anyone shed light on this for me please, I would hate to run out an buy another interface!

Have you tried hooking up just one device at a time? Don't know if it will help, but maybe it needs a little time to configure one device at a time.
I had the same kind of problem (with hooking up a Mbox2 (firewire) and an ext. firewire HD). I installed them separately. Now they still don't really like working together, but when I hook up my HD first and after that the Mbox, it works fine.

Alesis Multimix 8 Firewire Mixer

I preordered an Alesis Multimix 8 Firewire mixer when they were still going to be $250. They have finally been released, and are now $500. Luckily for me, the vendor I bought it from (SamAsh.com) honored the price I pre-ordered it at, and I got a $500 mixer for $250.
It came in today, and I can't wait to try it out tonight! According to the box, it supports 10 simultaneous channels in and 2 out via FireWire. I probably won't need more than three, but I don't mind the extra. :P

Well, unfortunately I don't know much about all this audio stuff. :-P
It has two firewire ports on the back, and apparently a certain one has to be used (as the first one didn't actually work.) These ports aren't labelled in any way.
I installed the driver from the CD (which requires OSX 10.3 or higher), and after a reboot I was working. GarageBand supports all 10 channels individually (mono) or will pair them as stereo tracks in order (i.e. 1-2, 3-4, 5-6).
The coolest thing I could tell from playing around with it was that I'm almost unable to make it clip. I can scream into it with the volume turned to 95%, and it doesn't cut anything off... it just maxes out in the yellow area on the mixer.
The setup I got working was one mic with hardware reverb, one mic with no effects, my guitar, and my keyboard (although my keyboard was connected separately via USB.) I recorded some with all tracks going at once. Everything recorded fine, although the microphones were noticibly quieter on playback. When I stopped the recording, my G5 iMac had to stop and catch up... there was a slight pause while it did who knows what.
I noticed that the unit was getting very warm. I suppose this is normal (and they don't call it "firewire" for nothing, huh?)

Alesis Multimix 12 Firewire

Hello everyone,
I'd appreciate anyone's input on this. What do you think of the Alesis Multimix line, particularly the Alesis Multimix 12 Firewire? I would like to use with Garageband and Logic Express (newest versions) on my old G4 Powerbook (867Mhz).
I'm considering this becuase it is the same price as my first choice, the Presonus Firebox.
I would like to use the 4 pre-amp channels to record drums.
Thanks!

I have been using the multimix 12 for about a year and hasrun incredibly smooth for me and is great for monitoring and multitrack audio... awesome choice

Firewire for Alesis Multimix 12 Firewire mixer

About a year plus ago I got A Alesis multimix 12 fire wire mixer and a Satellite A135-S4677 laptop to do portable recordings.. I could NEVER get it to work so I went back to Windows XP. Now I am back trying to get them to work together. The lap top will not recognise the firewire connection to the mixer. Is there any hope or is this a lost cause, anyone, please help.

Tnx Guys for posts. Some more info. I am using PC, not MAC, with VISTA that came with Satellite A135-S4677 . The mixer Firewire for Alesis Multimix 12 Firewire works with my desk top. After installing firewire drivers on laptop and connecting with suplied firewire cable, there is no "Found new hardware" after restart.

Alesis MultiMix 8 Firewire Problems

I recently bought a one of these interfaces and whenever I try and install the drivers from the cd it gave me, it doesn't start the installation process. Instead it spits out the cd without doing anything. I don't know what to do.

Hey there!
I experienced the same thing last week with the installation CD of my Alesis Multimix 8. Strangely, the CD did load on my friend's Mac Mini Duo and we decided to transfer the CD's files to my MBP via Bluetooth.
BUT, you can go checkout the Alesis website and find the latest Multimix 8 drivers for MAC intel: http://www.alesis.com/index.php?id=58,62,0,0,1,0
As for installing Cubase LE, well you might have to find an alternative...
So you are not the only one to have that cd spitting problem with the MBP.
MBP 2.0 gHz DuoCore, 1 gb RAM, 80 gb 5400 rpm HD Mac OS X (10.4.7) got a mac that kicks ***

Using Alesis MultiMix with STP

I am considering buying an Alesis MultiMix 12FW (see this link for info: http://www.acousticfingerstyle.com/AlesisFirewireMixers.htm). It sends each of its 12 channels and the stereo mix OUT of the Firewire port (and returns a mixdown BACK to the board via Firewire).
This is a low-cost unit that has some nice features, is compact enough to fit in my edit bay and seems that it will suit my needs. It has generally gotten good reviews.
The question is: will this interface with Soundtrack Pro so that I can assign different sources coming through the MultiMix's Firewire connection to a different track in STP directly? Has anyone used this combination (STP and the MultiMix) before? If so, what were the capabilities and results?
I have e-mailed Alesis about this but have gotten a "yeah it should work just fine" type of response. I want the REAL world info.
Anyone?
Thanks,
~ejr~
Erik J. Russell
Keen i Media Ltd
Freeport, Bahamas
www.keenimedia.com

Short answer: Yes.
I have the MultiMix8 Firewire and do exactly what you're describing...each input on the Alesis can be wired to a unique track in STP. Some of the USB mixers out there only output a stereo mixdown to the computer, which is why I went with FireWire: discreet channels and loads of bandwidth.
I only recently purchased Logic Studio and I'm a new GarageBand-to-LogicStudio converter so I don't have a lot of experience with the setup yet.

Alesis Multimix FIREWIRE question

Similar Messages

Maybe you are looking for