Alesis Pad not recognized

can i use an Alesis Performance Pad directly in GarageBand? Meaning, instead of using it as a controller, i want the actual sounds coming from it to be recorded. Help...

kizzle22 wrote:
i want the actual sounds coming from it to be recorded.
http://www.bulletsandbones.com/GB/GBFAQ.html#recordkeyboardssounds
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

I pad not recognized in i tunes

i pad not being recognized in i tunes

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Numbers for dial pad not recognized connected to o...

Hi,
When being connected to a bank (fixed line) support number through Skype I have to choose an option in their systems menu through the dial pad to be connected to the right department. However their system is not recognizing numbers picked from the dial pad and asks again after which the call is disconnected.
Please advise?
Thanks in advance ErikT

You can uninstall current version of Skype from the control Panel and you can install Special Version.
http://www.skype.com/go/getskype-sse
and disable automatic updating of Skype.
In Skype, Tools >> Options >> Advanced >> Automatic updates >> Click on Turn off automatic updates >> Save Changes.
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

IMac powers up fine. Wireless keyboard and tracking pad not recognized. Power lights blink twice, repeatedly. Any ideas?

My iMac was off during a recent thunderstorm. When I power up the computer all is fine. However the wireless keyboard and track pad are not recognized by the computer. Their power lights blink twice, go off, then blink again. Any suggestions?

Turned out that I had to disconnct the keyboard from the new iMac in order to show in the old iMac.

I pad not recognized by pc ....... Help.... Please.

Hi to all my I pad 3 will not be recognized by my pc I have temporarily disabled my anti virus , and re booted both & made sure all drivers are up to date .
I have made sure iTunes is the latest version & changed USB ports ...... Man I'm getting frustrated now dammit ......what to do next????
I'm in need of some advice can any one help it would be greatly appreciated by myself .
REGARDS
NTBLTRT

Try putting the iPad into recovery mode.
First plug the USB end into the computer, but DO NOT plug the other end to. The iPad just yet. Second, turn off the device. Third, hold down the home button and then connect with the dock connector still holding down the home button. Fourth, your iPad will turn on, and a Connect to iTunes message will be displayed, and iTunes will detect your iPad is in recovery mode. Restore it with your backup.

We have Topaz BSB signature pads not recognized in virtual environment

I'm wondering if anyone else is having this problem. Windows 7 recognizes the device. Device lights up, captures the signature and puts it on the document.
If you change the signature pad, the new one won't work. However, if you log in as another user that hasn't had a signature pad associated with it then the sig pad operates properly.
My theory is once a user profile has an established sig pad it won't accept another even though Windows registers the device. The program we are trying to use it with is Meridian Link.
Any feedback on this issue would be appreciated.

Hello Jack McM,
About hardware devices not working or not detected issue, please download and run the fix tool from the following KB to diagnose and fix the issues.
https://support.microsoft.com/en-us/mats/hardware_device_problems
Additionally, please contact the manufacturer as Rick Dee mentioned.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Keyboard number pad not recognized through bootcamp windows 7

Running windows 7 through bootcamp, the number pad on my keyboard does not respond.

I had the same thing as you (that my BT mouse & keyboard were working but then after a while they started to act up -mouse freezing on&off, keys sticking-).
In my case the 'before' and 'after' was actually running the setup on the Bootcamp Utility disk that contains all the Bootcamp drivers. There must be a rogue driver on there that messed up my system. I ended up doing a reinstall and only installing the bluetooth drivers (that are also on the same Utlity disk, but in the $WinPEDriver$ folder. This at least worked for me.
However, by doing so I did not get the handy Bootcamp utility in the lower left corner of Windows that allows me to conveniently reboot and switch from Win8 to MacOS. I am trying to figure out if I can install that utility separately without all the drivers being automatically installed as well

My I phone and I pad are not recognized by I tunes anylonger. Why? Waht to do?

My I phone and my I pad are not recognized by I tunes anylonger (it used to be, I do not know waht happened). Why? What to do?
Help, please.

Hello Dora Lucia,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
1. Update iTunes
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Have a nice day,
Mario

Can iMessage be used with non iOS 5 users, ie non-apple users. My new i-pad 2 error message says these contacts are not recognized by imessage when I try to text some of these contacts.

Can iMessage be used with non iOS 5 users, ie non-apple users?
My new i-pad 2 error message says these contacts are not recognized by imessage when I try to send them a text.

So that means that I can send text messages through my i-phone to reach non iOS 5 users, but not through my i-pad 2.

Alesis ProActive 5.1 not Recognizing Optical Conn

I'm using the Alesis ProActi've 5. Speaker system and the Audigy 4 Pro soundcard.
When connecting the optical cable from the breakout box to the Alesis controller (which has a coax and optical in) the Alesis system is not recognizing it. Although it does recognize the coax.
Can anyone help?
Thanx

To paraphrase the portion of the sticky above that is relevant to you:
Creative Labs does not make a sound card that ENCODES multi-channel sound into an S/PDIF output. All they can do is pass-through AC-3/DTS sound from DVDs and PCM (stereo) sound for other sources, such as games.
In other words, if you play games with multi-channel output, you must use analog/mini-jack cables to send sound to your speaker system or home theater receiver's 5./7. RCA inputs.
If you want realtime 5. encoding for games, so you can just use one digital cable from your sound card to your receiver, then you must look elsewhere, or wait for Creative Labs to release their DTS-60 ($99), which is an external device that takes 5. analog sound and creates a digital DTS stream.
If I were you, I'd ditch the Audigy 4 and get a
http://www.newegg.com/Product/Product.asp?Item=N82E68292700
Although, if you do, you won't have any EAX higher than 2.Message Edited by bollwerk on 08-0-2005 0:40 PM

After installing fedora in my laptop touch pad is not recognizing by OS

am having lenovo 3000 g430 , yesterday i installed fedora 7 in my laptop.
installation was successfull but the touch pad is not recognizing , is there any way to resolve this issue
thanks in advance

Kenz,
Here is the link for the touchpad driver for fedora
Have you tried to enable "gsynaptics touch"?
You will have a file called xorg.conf in the etc directory '/etc/X11/xorg.conf' .It should look something like this
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105+inet"
Option "XkbLayout" "us"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Add this section below the keyboard but above the video card:
Section "InputDevice"
Driver "synaptics"
Identifier "TouchPad"
Option "SendCoreEvents"
Option "Protocol" "auto-dev"
Option "SHMConfig" "on"
Option "Emulate3Buttons"
Option "VertTwoFingerScroll" "false"
Option "HorizTwoFingerScroll" "false"
Option "HorizScrollDelta" "0"
Option "TapButton1" "0"
Option "TapButton2" "0"
Option "TapButton3" "0"
EndSection
and then add this to the server layout section just below the line for the keyboard:
InputDevice "TouchPad" "CorePointer"
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

My I pad is not recognized by Windows Vista

My IPAD and IPOD are not being recognized by Windows Vista.... Any suggestions?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
 Cheers, Tom

I pad is not recognized in i tunes

I am unable to get the ipad to be recognized in itunes; it is fully charged and connected via the usb cable provided. I have an iphone and have had not had this problem with that device. I tried shutting off/rebooting/resetting the ipad as instructed on the support page, but I can't get the red arrow to show up and can't get the apple logo to shut off when pressing the arrow and the home button. What next?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
 Cheers, Tom

HT3964 a letter not recognized on pad

I have an Imac that the key board Y was broken. I purchased a new wireless keyboard and still the letter y is not recognized. Do I need to reset something in the settings?'

Primus - that is exactly what our ZVM does, charges on the USB but will not dock. I tried reloading drivers, checking devices, but it does not show up anywhere. I tried to open it with Creative Explorer - nada, it says there?was no device connected. I am going back to Best Buy today, to try and take it back, or let them try something. Bad, Bad Creative. If I didn't use subscription music, I would get an Ipod in a second.... BTW - there is lots of tips on the other Creative board for media devices too for ZVM. I tried them all, and nothing, but there is lot there....

HT202274 Password change old password not recognized after 10.9.5 upgrade

God bless you, peace.
macbook pro 2012 user password not recognized after 10.9.4 too 10.9.5 upgrade plus tech work at apple.
I want to change user password, it is allowing me to get into user account and admin account on computer but I recently changed it for the tech work to be done. I would like to put the password back now to old password or a new one but... The few days old new password pre update and pre tech work is not being accepted to allow me to change to another password.
recent update, after 10.9.4 to 10.9.5 update and apple tech work done.
1. Tech work replaced optical drive,
2. 10.9.4 to 10.9.5 upgrade left computer endlessly booting up, then got into finder window tried to read backup drive and screen went to black curser and could not backup information as techs decided may need to be done before I left it with them.
3. Also track pad was not (is not again) selecting text to drag unless real hard press and then only intermittently would select text or just drop the selection (not hold the selected text after a long scroll select, did work at first after tech work but back to not working). It is still not responding easily when pressed, but it is much better, as they did something with software they said. Today While typing this I am trying to select words misspelled and it does not select them unless I press not as hard it is becoming the same as before I see now, sometimes less pressure is needed but more than should be used.
I noticed today after tech work The Spell check is not responding with a two finger tap on the red underlined misspelled words without multiple try's with two finger tap. The curser moves around after selecting words also, or when selecting words so hard the curser moves to another place not on the desired words or check box. The curser arrow tip should select the word but it does not recognize unless I put the tail of the arrow onto the word then it recognizes the misspelled word for spell check on two finger gesture.
It looks like I need to take it back, I tried to call and check to confirm if the track pad intermittently and curser adjustment was serviced. In order to verify I had called three times to get that information to no avail. endless looped in the phone que, one would answer take info and then forward me to a endless loop dial ing phone that never was picked up, supposedly at the Bay street store tech section. Phone voice mail from apple support status on the repair, ...Juliano from Bay Street Apple repair store Emeryville, ca left a voice message... just generically said optical drive replacement is successfulI, I noticed right away three items were to be addressed but only the optical drive was mentioned, so I called three times to try and verify the other problems. One whole minute just to select this text and copy it to notes for a backup. It would not select at first, then after selected it would not copy it, then it would not paste to notes, it paste the last cut and paste I did 10 minutes ago.
I do not have a easy excellent wifi connection for my wifi only phone and would prefer email or chat for repair help. apple Repair No: R142180337

Try running the combo update. It fixes more files/data than the App Store upgrade.
10.9.2

Alesis Pad not recognized

Similar Messages

Maybe you are looking for