ALI Search error: "Error - Could not contact the Search Service"

Hi,
I have installed Aqualogic Interaction with all its components.
While trying to search for a string, it is throwing this error:
"Error - Could not contact the Search Service".
Unable to figure it out. Is this because of the search host settings?
Where can I check/modify the search host settings? I am not able to find them.
Can someone please help on this?
Thanks in advance,
Ashok

The settings for the search server are located in Administration. Go to the utilities drop down, from here you should see Search Service Manager. Here you should see the contact node host and port.
Make sure the Search Server is running. Also, import the searchcluster.pte file so that the Search Cluster Manager is visible in the utilities drop down.
Kenan
http://www.ppc.com

Similar Messages

Error executing search on Plumtree Corporate Portal : Could not contact the Search Server.

Hi
I have intsalled the plumtree portal.... The links are working. But when i search any word then it gives following error messages
"Error executing search on Plumtree Corporate Portal : Could not contact the Search Server."
Please let me know what could be the solution to above problem
Thanks

Santosh,It appears that your portal server can not connect to the Search Server.1) Check to ensure that the "Plumtree Portal Search Server" NT Service is running. It will be an NT service. If you check the PlumtreePortal_v5-0.properties file you should see two entries for where you installed the Search service.SEARCH_SERVER_HOST=servernameSEARCH_SERVER_PORT=15244
2) If the service is not started, then start it...
3) You can test connectivity to the Search Server by telnetting to server in question at port 15244 (or whatever port you installed the search service on). If you get a response from Ignite, then the search server is up..
Phil Orion | [email protected] | www.orionsmith.com

"Reader could not contact the server to complete the request" error

While trying to tranfer a document into pdf format I have suddenly received the above error - "Reader could not contact the server to complete the request" I have already transfered three or four documents today, but now am suddenly receiving this error. I have tried rebooting my server to check for issues on my end but it is fine. Any suggestions? Thanks.

Hi there,
Here are some suggestions you can try:
a) Ensure your internet connection is available and try again.
b) If you are using an older version of Reader, try installing the latest (Reader XI) and try again.
c) Log into the web app (createpdf.acrobat.com) and click on Convert to PDF on the right hand pane and try converting to PDF from there.
Laura.

Book Module Error "Could not contact the Blurb Web Service"???

I have successfully used Lightroom in the past to upload a book with no problems. I'm currently running the most updated version of Lightroom v 5.6. I've just finished a new book and am getting the error message "Could not contact the Blurb Web Service. Check your internet connection." My internet connection is fine, my firewalls and anti-virus are turned off, I've restarted both Lightroom and my computer. Same problem.
My research has shown this is a very common problem, but all the forums I've found do not have answers on how to solve the problem. All the posts I've found about this problem are either unanswered or suggest things like turning off and turning back on "unchecking apply background globally" and other tips related to the background and text, or change the cover style back and forth, etc. None of these has worked for me.
I am ordering this book as a wedding album for a client and it is URGENT that I get the order uploaded within the next few days or I'm going to have to refund the clients' payment and lose the job, which would be extremely professionally embarrassing. I'm VERY frustrated and have very eager customers waiting. PLEASE HELP ASAP!!!
Janine Fugere
As Seen by Janine
www.asseenbyjanine.com

I solved the Lightroom Book Module problem of "Could not contact Blurb Web Service. Please check your internet connection."
With the help of Adobe Lightroom's telephone tech support, a very patient man named Himanshu helped me discover what was causing this issue, after researching the issue and calling me back. Nice touch Adobe! It was pleasant to be able to do other things while Himashu researched and consulted with other techs to find my solution.
As very many other people have reported in user forums, the problem was not that I didn't have an Internet connection.
The problem was caused by my PC's Windows 8 User Account Settings, which somehow had Internet Settings that conflict with the upload to Blurb from Lightroom. The Adobe Lightroom tech support person helped me create a new user account, and I am able to successfully upload to Blurb from Lightroom under the new account. We created a quick test book to try and it worked just fine under the new user account.
Not sure how this solution would translate for a MAC user (I've read of people with Mac computers getting the same upload error) but I advise checking your User Account's Internet Settings, whatever type of computer you are using.
The only minor glitch I still have is that my new Windows user account can't access any of my photo files (or any other files) from my old user account, even when I gave the new user account administrator access. I have a very large internal hard drive, so my photos & catalog are stored internally. The Lightroom tech support advised me to contact Lenovo (my computer manufacturer) for help to transfer all my files from my original user account to the new one I just created. I will do that very soon.
Meanwhile, my temporary workaround was to export my Lightroom Catalog and the photos I needed for this book onto an external hard drive, so I could access them from the new user account. My wedding clients' book has been successfully uploaded to Blurb!
I'm sharing so others with this problem uploading from Lightroom to Blurb may also find this solution works for them, too.

Windows could not start the Server service on local computer Error 193:0xc1

Hello,
Not able to start Server (lanmanServer) Service in Windows Server 2008 R2
Its a VM and on logging into the Server it sometimes shows as started and then will stop by itself,
If we try to start manually it always gives the error --Windows could not start the Server service on local computer Error 193:0xc1
All dependent services are fine and running ,did sfc,did copy svchost and svcsrv.dll files from a working Server of same.but no help,no shares of this server are accessible since this service is not running
on checking the event log its shows an error "Server is not a valid win32 application"
Please help
Thanks and Regards
Jose

Hi,
Thanks for posting your question in the forum.
I noticed that you have created the same question in another thread. Please understand that we should focus on only one thread for the same question at the same time, please focus on the thread
below you created in the forum. Thanks for your understanding.
http://social.technet.microsoft.com/Forums/en-US/5ba43477-9626-4fdf-872a-d3ecd12835c5/windows-could-not-start-the-server-service-on-local-computer-error-1930xc1?forum=winserverNIS
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

ITunes could not contact the iPod software update server

I am a teacher managing many iPod touches.
I am trying to update the ipod software to version 3.1.3 but using my macbook (10.5.8) I cannot reach the update server and a I get the following error - "iTunes could not contact the iPod software update server". I am connected to the internet, I can access the iTunes store no problem.
Using my windows XP laptop I can access the update server and I am using the same network ID and the same proxy settings.
Any ideas?

Forget the wireless modem part of the question. I tried plugging directly into my pc and still have the same problem...very frustrating!

Firefox could not install the search plugin from "chrome://tnt2toolbar/content/yos.xml" because an engine with the same name already exists.

each time I open Fire Fox I get this error "Firefox could not install the search plugin from "chrome://tnt2toolbar/content/yos.xml" because an engine with the same name already exists." and
I can't search for anything. HELP!!!
Thanks
Tom

That is a problem with an extension that tries to install a search bar. The tnt2toolbar should give you a clue about which extension. You didn't add troubleshooting information with the list of installed extensions, so I can't give a suggestion about which extension is causing this.
You can check for problems with preferences.<br />
Rename or delete the prefs.js file and possible numbered prefs-##.js and user.js files to reset all prefs to the default value.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Could not contact the agent. check wheather the url connected to the agent.

i am having the problem with the error message " could not contact the agent. check wheather the url connected to the agent is null". This error occurs while login with credentials, and because of this i cant open the em page, please help me to solve this problem

Hi,
Can you please confirm the following:
1. Are you trying to login to Grid Control, when you are getting this error?
2. If yes, what was the version of Grid Control?
3. Provide the output of commands:
./emctl status oms -details
./emctl status agent
Best Regards,
Venkat

Firefox could not download the search plugin from

I have installed Firefox 24.0 recently and I am trying to install youtube Search Engine by opening www.youtube.com and clicking the Add "YouTube Video Search" in the search toolbar , but I get the following error message:
Download Error
Firefox could not download the search plugin from:
http://www.youtube.com/opensearch?locale=en_GB
Is it a Firefox problem, or a youtube error?

Thank you for your reply.
I don't want to install addon for youtube search. I just wanted to know if I can install the youtube search engine as before.
After some reading on the internet I found that search engine is described by a small XML file that is available through a link on the page. All other pages with working search engines like Wikipedia or IMDb generates XML content or refers to XML file. But the link of youtube opensearch descriptor points to an opensearch.osdx file.
I don't know if it is the extension, or if there is unsupported tag in it but Firefox is not willing to handle it and add youtube to the search engines.
I found this page: http://www.tobtu.com/customsearch.php I copied the relevant tags to the input fields and added YouTube Video Srearch. Now it works fine.
But the question remains: is it Firefox that cannot handle youtube's sandard opensearch descriptor or is it youtube.com that provides a faulty descriptor?

Error while trying to upgrade my iPhone, message reads "iTunes could not contact the iPhone software update server beecause your are not connected to the internet.

Hello,
I am trying to upgrade my iOS to version 5 but receive the message noted below ("iTunes could not contact the iPhone software update server because you are not connected to the internet"). I click update on iTunes. My internet works fine. Does anyone know what may be causing this error?

Try disabling firewall and virus scanning software

Proxy Error "Could not contact the other system"

Hi
I am getting this error when i run a report which a proxy.
Could not contact the other system
What i need to check?
Thanks

Hi Prabhu ,
Hope you are using ABAP client Proxy !!
I am getting this error when i run a report which a proxy.
Could not contact the other system
What i need to check?
At ECC side :
> Check the Transaction SLDCHECK is working fine
> RFC Destination LCRSAPRFC and SAPSLDAPI is working fine
> Entry is proper at SLDAPICUST Transaction
Please share the message at XI end as well as at ECC end of SXMB_MONI ?
Regards ,
Edited by: Santosh Rawat on Oct 22, 2009 9:55 AM

Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
Shamil

Hi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Device Installer error - Windows could not load the installer Image.

I am windows XP and have loaded new Itunes 7.7 and the Iphone 3G I just received cannot be recognized by my PC/XP I get a dialog box saying
Device Installer Error
Windows could not load the Installer Image. Contact your hardware vendor for assistance.
OK
Of course it is not OK hence why I am here seeking help from this fine community of users of superior Apple products

Deleted Itunes, Quicktime, apple mobile support and updater. Reinstalled and it all worked. Had to do the same thing last time. NOT TOO FUN.

HT4972 After upgrading iPhone 4 to iOS 5.1.1 getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored" HELP!

I attempted to upgrade my iPhone 4 to iOS 5.1.1. I selected 'back up' from the phone in the device menu and iTunes confirmed that the phone had been backed up. I then installed iOS 5.1.1 which wiped everything on the phone & now I am getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored".
I have tried restoring factory settings but iTunes simply will not restore from back up & I'm not sure what else to do!
Any advice would be much appreciated.

I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.

Error message"Could not complete the Save command......

Sometimes when I open Photoshop CS6 (cloud version) and I try to save my work I wil get an error message: "Could not complete the save command because the document is currently being saved in the background. Please try the operation again after the Save Command has finished" Well the background save never finishes and I end up having to restart Photoshop and lose all my work. Any ideas. I am running Windows 7, core i& quad procewssor and 12 gigs of ram.
Thx

Hi Chris!
Yes. I did that after the first time it happened and then it happened again. Here is my system info:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 6264 MB
Memory available to Photoshop: 10996 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 6800 Series
Display: 1

ALI Search error: "Error - Could not contact the Search Service"

Similar Messages

Maybe you are looking for