Alias issues. How to delete.

Mac Pro 1,1 10.6.8
I ran drive genuis 3 and it found issues with my system drive.
I decided to copy the contents on to a volume of an external drive.
I did not use the option key, so an alias was created.
I tried to delete the alias, but it would not.
All 4 volumes on the external are now blank.
I ejected the drive. Attached a new one and created a carbon copy of my system drive.
I repaired the internal system drive.
The external drive with the alias will not mount.
I would love some advice, please.

The external drive with the alias will not mount.
A drive that cannot provide Disk Utility with BOTH its Make&Model AND a sensible, non-zero Size/Capacity cannot be repaired by any software. If its cabling and power are intact, the drive has died.
If Disk Utility can recognize those things, but cannot mount it, and it only contains junk anyway, I recommend you erase it.
If you want to be sure it is still good, Erase with Security Options: Zero all data, one pass -- will assure you that if the initialization completes, the drive has 100 percent good blocks again. (it will substitute spares out of the spares pool to replace any blocks found bad after re-write.) If it fails, you know for certain it is a door stop.

Similar Messages

How to delete System Alias while the related sytem has been deleted

How to delete System Alias while the related sytem has been deleted?
When I deleted the System, I ignored the dependence object. Now i need to deleted the sytem alias, but the system has already been deleted, how could i do?
Thank you very much!
Regards,
Xiaoming Yang

hi Yang,
checkout the link..,
Re: EP 6.0.13.0 : iView : System Alias
hope it helps..,
regards,
Vinoth

I get a lot of spam on my old mobileMe-alias. How do I delete that old .me adress?

I am using my iCloud-account, but still I get a lot of spam to my old MobileMe-alias. How do I delete the adress? (They don´t show up in iCloud)

[email protected] and [email protected] are the same thing - you can't actually delete the @me.com version.
However you can deal with the problem by setting up a Rule to move all messages address to the @me.com address to the Trash, from which they will automatically be deleted after a week, so you won't even see them.
Go to the Mail page at http://icloud.com ; click the cogwheel icon at bottom left and choose 'Rules'.

How to delete alias files? I already delete the files but the alias is still at ALL MY FILES under MOVIES? Please help.

"The alias "title.TS.Xvid.MP3-ADTRG.mp4.vc.m4v" can't be opened because the original item can't be found." How to delete this file?

Drag it to the Trash. (Mac 101).

Phone. How to delete that fromEmail issues in E71

Hi. I have a Nokia E71. I have configured my gmail mail box in this. If I want to remove the configured email from E71, how to do that? Further the sender's name, Subject & date is automatically stored in that. How to delete this details?

Highlight the mailbox-> options-> delete.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How to Delete emails in Specific range on database level (Exchange 2010)

Hi All,
Kindly assist me on deleting emails in specific range. i have exported all users mailbox using this below powershell script and in the same manner can we delete all the emails from users mailboxes in the below date range. Please advise
foreach ($usr in (Get-Mailbox -Database "DB01")) { New-MailboxExportRequest -ContentFilter
{(Received -lt "12/07/2012")} -Mailbox $usr -FilePath \\Server01\DB01_Export\$($usr.Alias).pst・}
Thanks, Venkatesh. "Hardwork Never Fails"

Hello,
You can use search-mailbox cmdlet with -deletecontent switch:
http://technet.microsoft.com/en-us/library/ff459253(v=exchg.141).aspx
http://andersonpatricio.ca/how-to-delete-messages-using-search-mailbox-in-exchange-server-2010/
Hope it helps,
Adam
www.codetwo.com
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
find the answer faster.

How to delete the deployed composite in weblogic server 11g

Can someone tell me how to delete the deployed composite in weblogic server 11g ?I'm facing an issue where the weblogic server is getting started and immediately after sometime the server changes to "Force shutdown"..When i checked the logs,there is an error in one of the composite i deployed..So now i wanted to delete the deployed composite?Please help ....
Thanks

Hi
1. Deleting a domain will not hold any references. But make sure that under your user_projects/applications also remove the folder that matches with your domain. Basically under user_projects folder you will see 2 folders named applications and domains. When you create a domain say mySoaDomain, it will crate a folder with the same name under applications folder also with few files like em.ear. If you do this, then you can crate a new soa domain and use the same old name.
2. NOW comes the most important thing. If you create a new SOADomain, at one point, you had to give details for soainfra and mds schemas. If you give your current existing db details (that was used for your old deleted domain), then you may still have the issues. Because the soainfra db may still have the instances for your old process.
3. If you really want to have a full clean soa domain, here is what you do:
a) Run rcu and drop the existing schemas for soainfra and mds.
b) Run rcu again and create above schemas again.
c) Now create SOADomain using config wizard and refer above clean rcu db and you are all set.
3. Under your domain root folder, just searh for files named with your workflow and you should see the .jar location.
Thanks
Ravi Jegga

How to delete the number saved in CALL FORWARDING list?

how to delete the number saved in CALL FORWARDING list? seems like the number cannot be deleted in CALL FORWARDING list, i tried several times...
he thing is, here are three numbers in the call forwarding list, one of them were set up by mistake, and none of them can be deleted.......it brothers me all the time. i already turn it off, but the number list is still there...

Hello dennis130915 and welcome to the BlackBerry Support Community Forums.
The image you have uploaded is unable to be displayed.
Call Forwarding is a carrier controlled feature. Most likely, the number you see could be for the Voice Mail server.
It's advised you call your mobile service provider to further assist with this feature.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to delete the Generated files from application server(open hub)?

hi experts,
when i try to execute process chain the DTP it is giving below dump. Exception CX_RSBK_REQUEST_LOCKED logged.
when i execute the DTP manually and trying to delete the previous request, it is giving for dump ITAB_DUPLICATE_KEY.
so to delete the generated file from application server, how to delete it for specific dates?
Information on where terminated
Termination occurred in the ABAP program "GPD6S3OE0BCVGC6L9DBNVYQARZM" - in
"START_ROUTINE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 2874
of the (Include) program "GPD6S3OE0BCVGC6L9DBNVYQARZM".
The program "GPD6S3OE0BCVGC6L9DBNVYQARZM" was started as a background job.
and when i check the dump it is point out at below code
" Populate the lookup table for 0STOR_LOC
SELECT * from /BI0/TSTOR_LOC
into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
but the programme is syntactically correct only.
how to rectify the issue.
regards
venuscm
Edited by: venugopal vadlamudi on Sep 28, 2010 1:59 PM

hi experts,
We have written start routine to get the storage location text and sending to File located at Application server through OPEN HUB.
here is the code written in the Transformations
In the global section
Text for 0STOR_LOC
    DATA: l_0stor_loc_text TYPE HASHED TABLE OF /bi0/tstor_loc
          WITH UNIQUE KEY stor_loc.
    DATA: l_0stor_loc_text_wa TYPE /bi0/tstor_loc.
and in the code to get the text
" Populate the lookup table for 0STOR_LOC
    *SELECT * from /BI0/TSTOR_LOC*
      into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
      FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
              STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
im sure there is problem with the Routine only. i think i need to change the code if so please provide me the modified one.
thanks
venuscm
Edited by: venugopal vadlamudi on Sep 29, 2010 9:37 AM

How to delete string or line from unix file(dataset) of application server

Hi All,
After transfer workarea information or all records into dataset(unix file). When I see the file in application server automatically the last line is shown a blank line. I am not passing any blank line.
I have tried for single record than also the file generates the last line(2nd line) also a blank line.
When I m reading the dataset, it is not reading the last blank line but why it is showing the last blank line?
How to delete string or line from unix file(dataset) of application server?
Please give your comments to resolve this.
Thanks
Tirumula Rao Chinni

Hi Rio,
I faced similar kind of issue working with files on UNIX platform.
The line is a line feed to remove it use
DATA : lv_carr_linefd TYPE abap_cr_lf VALUE cl_abap_char_utilities=>cr_lf.
DATA : lv_carr_return TYPE char1,
         lv_line_feed   TYPE char1.
lv_line_feed   = lv_carr_linefd(1).
lv_carr_return = lv_carr_linefd+1(1).
Note: IMP: The character in ' ' is not space but is a special
character set by pressing ALT and +255 simultaneosly
REPLACE ALL OCCURRENCES OF lv_line_feed IN l_string WITH ' '.
REPLACE ALL OCCURRENCES OF lv_carr_return IN l_string WITH ' '.

How to delete a single request from DSO in BI 7.0

Dear Experts,
Could you please tell me how to delete a single request from DSO?
I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
Please suggest me this issue.
Regards,
Prathap

IN DSO--its a very basic thing....
ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
So ,each new request has a realationsip with the older request.
So in the cases:
1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
e.g older request entries:
a x 1
new request
a x 2
change log
a x 1
a x -1
a x 2
so its quite obvious you can't have a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
thats request reverst posting
IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
regards,
rk

My apple and itunes id are synched but my icloud is an old apple id and I can't figure out how to delete it and change to current Apple Id. i tried to delete it but I have to have the oassword and the knes I know of are not working. Thanks for any he

I have an iPad 2 with most recent update 8.1.3. I have been experiencing connection problems, wifi dropping all the time. I get the prompts to enter passwords for iCloud and i Tunes all the time. I finally synched my Apple ID with my iTunes ID but the iCloud is still connected to an old email. I cannot figure out how to delete it as iCloud is not accepting the password I am using. I go round and round with changing passwords, etc. What am I doing wrong? How can I sync everything?

Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H.

How to delete the data in P,Q and S table

Hi All,
I want to delete the data in /BIO/PCOSTCENTER, /BIO/QCOSTCENTER AND /BIO/SCOSTCENTER. Since we have transported the costcenter infoobject from 3.0B to BI 7. But the 3.0B doesnot contain the ALPHA conversion. So we need to delete the infoobject and install from BI content.
When I am trying to activate the BI 7 obj, It is giving the error message the above tables are containing the data.
Pls suggest how to delete them and activate the 0COSTCENTER with BI 7 version.
Points will be awarded.
Thanks
Sathiya

Program RSDMD_DEL_BACKGROUND is the appropriate choice to delete master data. You should be able to search OSS notes on te pgm to get a little more info on it.
It insures referential integrity by checking all InfoProviders to make sure a master data value for that InfoObject does not exist in any InfoProviders. This might not be an issue in your case if you are dealing with a newly activated object that you have don't have in any Infoproviders, but is the only the best way to delete master data.

How to delete the items in the recycle bin permanently from the windows using Diruse command

How to delete the items in the recycle bin permanently from the windows using Diruse command.
Because most of the time we get out of disk space issues.
Can somebody help me in giving with an example

You can right-click Recycle Bin|Properties and choose radio button for
Don't move files ....
This one may also help.
http://technet.microsoft.com/en-us/library/cc784980(v=ws.10).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to delete old logs in SAP BI, what is the best way to go?

Hi,
below are the issues we are facing,
when executing infopackage job is not getting triggred into source system.
for activation DSO data it is taking huge time. At the time of seqential read to RSREQDONE table.
I think this is due to huge logs in the staandard tables.
What could be the reson behind this.. and let me know how to delete old logs.
Thanks,
Harish

Hi,
just carry out RSRV for DSO PSA tables and see if there is inconsistency available there in the PSA table.
see if the change log and PSA deletion is happening regularly..else schedule same in PC
check with basis there are certain jobs which needs to run regularly at certain frequency..
http://www.erphowtos.com/guides-a-tutorials/doc_view/1041-how-to-delete-process-chain-logs-in-sap-bw.html
http://www.erphowtos.com/guides-a-tutorials/doc_view/1040-periodic-maintenance-activities-on-sap-bw-best-practices.html
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Thanks and regards
Kiran

How to delete the multiple companies assignement of a employee in SRM

Hello Friends,
In business partner maintenance (BP), one employee assigned to multiple companies in relationship tab.
Following are the entries observed in relationship tab in BP Transaction code.
Is employee of
xxx(BP number) u2013 Company(address type) --- xxx(description) u2013valid from --- valid to -->1st entry
xxx(BP number) u2013 Company(address type) --- xxx(description) u2013valid from --- valid to --> 2nd entry
Ideally one employee should assigned to one company only.
Kindly let me know how to delete the relationship.
We are using release SRM 5.0 with classic extended scenario.
The organization structure is HR Replicated.
Thanks in Advance,
Pithani Suresh

Hello Ganesh,
Thank you for providing information.
The employee is not assigned to multiple companies. The assignment is related to orgnizational unit.
In organization structure (PPOSA_BBP), the user/position is assigned to one organization unit only
More details about this issue,
we find the relationship of the user/position in BP T.code (Relationship Tab), it is showing the relationship with current organizational unit and previous organizational unit. Ideally it should be assigned to one organizational unit. Due to some inconsistency, it is still showing the previous organizational unit.
Example: Ex: User A is replicated from HR to SRM and assigned to Dept A (org unit 1) and later User A is shifted to Dept B (org unit 2) from HR Replication.
Following are the entries observed in relationship tab in BP Transaction code.
Input is BP number assigned to of the user A central person.
User u201CAu201D is employee of
BP number of org unit 1u2013 Company(address type) --- xxx(description) u2013valid from --- valid to -->1st entry
BP number of org unit 2 u2013 Company(address type) --- xxx(description) u2013valid from --- valid to --> 2nd entry
Thanks & Regards,
Suresh Pithani

Alias issues. How to delete.

Similar Messages

Maybe you are looking for