Alias names couldn't be shown on Prompt window or POV

hi All.
We have some financial reports , display this reports on workspace. But we want to change dimension member from prompt option window or POV. Pop up window shows us only members “Name”s, we can not see member alias.
hyperion Financial Reporting 9 , version 9.3.1.354
hyperion planning 9.3.1.1.10.4
thanks

Hi ,
Follow below procedure will help you to display member alias in POV.
1) In workspace File > Preferences > Financial Reporting.
2) From User Point of View, click General tab , select Setup Members. The Setup User POV dialog is displayed.
3) Select data sources from Database Connection.
4) If prompted enter your log on credentials, click OK
5) Select the member label you prefer from Display Member Label. If you wish to see Alias name in POV window then select *'Default'*
6) Click OK to save your current changes and return to the repository screen.

Similar Messages

Alias name for the column name in Prompt

Hi,
I have a scenario where I am taking column names into prompt. I have used the following SQL in the SQL results under "Show" option of the Prompt.
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By OrderDate"' END FROM " Real Time"
UNION ALL
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By ShipDate"' END FROM "Real Time"
My problem here is I am getting the column names into the Prompt as "Orders"."By OrderDate" and "Orders"."By ShipDate", which is not acceptable and readable for mat for the user. Is there any way that I can assign an alias name for the column name such as OrderDate and ShipDate in the above SQL.
Your quick respose is appreciated.
Thanks,
Rama

hi,
try an alternative one....in your administrator make new columns with alias to ones you want...so you wiil be able to show whatever you want.
Otherwise,is it possible to show
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By OrderDate"' as "xxxxxxxxxxxxx"END FROM " Real Time"
UNION ALL
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By ShipDate"' as "yyyyyyyyyyyyyyyy"END FROM "Real Time"
Ending,you want the data from your columns?or just the name??
hope i helped...
http://greekoraclebi.blogspot.com/

Alias Names for Column names in the Prompt

Hi,
I have a scenario where I am taking column names into prompt. I have used the following SQL in the SQL results under "Show" option of the Prompt.
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By OrderDate"' END FROM " Real Time"
UNION ALL
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By ShipDate"' END FROM "Real Time"
My problem here is I am getting the column names into the Prompt as "Orders"."By OrderDate" and "Orders"."By ShipDate", which is not acceptable and readable format for the user. I tried using the alias name in the SQL query this way.
SELECT (CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By OrderDate"' END) AS "By OrderDate" FROM " Real Time"
UNION ALL
SELECT (CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By ShipDate"' END) AS "By ShipDate" FROM "Real Time"
but it is throwing an error.Is there any way that I can assign an alias name for the column names such as OrderDate and ShipDate in the above SQL.
Your quick respose is appreciated.
Thanks,
Rama

Change ur
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By OrderDate"' END FROM " Real Time"
UNION ALL
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE '"Orders"."By ShipDate"' END FROM "Real Time"
To
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE By OrderDate END FROM " Real Time"
UNION ALL
SELECT CASE WHEN 1=0 THEN AGE.AGE ELSE By ShipDate END FROM "Real Time"
So that it displays the Name as required
Then in the Fx for that column in the Report Use '"Orders"."@Presentation variable"'.
This worked for me Let me know if it worked for you.

How to specify alias name in system property while making 2way SSL con ?

Hi All,
I am tring to run a java client with 2way SSL which uses CAC card as keystore for the client. I have addded the following system property in my client program to make it work and change the java.security file to add pcks11 provider.
System.setProperty("javax.net.ssl.keyStoreType", "pkcs11");
System.setProperty("javax.net.debug", "ssl");
The program works fine and handshake is successfully done . But the problem is when i have more than one trusted certificate in the CAC card, it take a default certificate. I want to specify the certificate that should be used to do the client auth maybe specify the alias name . I didnt find any system property to do so.
Please let me know how to specify alias name as system property so that the 2way SSL used the specified alias for the client auth or is there any other way to specify the alias name. As in case i acccess the server URL from any browser i get a certificate selection prompt and the connection is established with the selected certificate.
Thanks in advanced,
Ruhul

I didn't find any system property to do so.There isn't one.
Please let me know how to specify alias name as system propertyYou can't.
You would have to write a custom KeyManager. See the JSSE Reference Guide.

Unable open Project details or a project from PWA Project server 2010 with Alias name

Hi,
I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is project server 2010,
My system is ABC.DC.IN alias name i have given is DEF.AD.COM
With the system name i can able access PWA and all are working fine.
As i have observed with alias name i can able to login to pwa and all the server setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx)
its is coming in the below of the ie.
But with Alias name these are the issues i am facing,
1.when longing with alias name its asking two times for user name and password
2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
can any one Help me.
vijay kommireddi

Hi Eric,
Thanks for your Reply.
As you said i have added in Manged Path as (Testpwa/projects.aspx as <Wildcard inclusion>) But still problem is there it is asking user
name password again if click on any project in project center and and showing page cannot be displayed error.
This is url its is showing in the below of the IE ( http://def.ad.com/testpwa/projectdrilldown.aspx?ProjUid=e28c6d43-85b6-478d-9542-2961cc81a69e)
I have observed one more thing if click on Project
details then only this issue is coming project schedule and project information
is also opening with Alias name.
My farm version is 14.0.7015.1000
Vijay Kommireddi

How to change the Existing alias with new alias name...MAXL SCRIPT

HI Experts
I need to change alias name of the existing member with new alias name.
please send me maxl code to change the alias name .
My thought is
1) Old alias should be replaced with new alias name .
2)There is one account that should be rolled out to another parent..these parents are already exsist
3) I need a MAXL Script to change the new alias name .
please suggest ASAP.
Thanks
USER

John
I heard that we can replace existing alias name with new alias thru MAXL
i.e replace alias name XXXX member with YYYY ;
please correct me if iam wrong ,might be Maxl command is wrong but this is the idea.
Thanks
USER

Unable to open the Projects from Project center with the Alias name PWA 2010

Hi,
I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is project server 2010,
My system is ABC.DC.IN alias name i have given is DEF.AD.COM
With the system name i can able access PWA and all are working fine.
As i have observed with alias name i can able to login to pwa and all the server setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
is coming in the below of the ie.
But with Alias name these are the issues i am facing,
1.when longing with alias name its asking two times for user name and password
2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
3. I have observed one more thing if click on Project details then only this issue is coming project schedule and project information is also opening with Alias name.
can any one Help me.
Vijay kommireddi

Hi
Hope the below link will help you.
And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

How to Change the Alias name for Internet user in SU01 tr code through cod?

Hi Guys,
             My req is we have to change the Alias name(SU01 tr code) for the existing users thru code.So can anybody tell me how to change the Alias name like which we do it in SU01 tr code thru code or FM.?
            Is there any FM for tha changing Alias Name?
Thanks,
Gopi.

Hello Gopi Anne ,
                             You can use the following FM / BAPI :
BAPI_USER_CHANGE
MY_BAPI_USER_CHANGE
For BAPI_USER_CHANGE :
You need to make use of the IMPORT parameter :
ALIAS     TYPE     BAPIALIAS                               User Name Alias
ALIASX     LIKE     BAPIALIASX                               User alias change flag
Thanks,
Greetson

How to sort the members by alias names

I am trying to create dimension build rule whicl will sort the dimension members in an ascending order, but it has to be based on the alias name instead of the member name.
I have tried both Parent-CHild and Generation reference but it doesn't work.
For example
for the city members PSE ( alias name Purchase), and USALB ( alias Albany) needs to be sorted by alias names
the current order is
PSE(Purchase)
USALB(albany)
but the requirement is to be
USALB( Albany)
PSE(Purchase)

Even with presorting the input, you still have work to do. By default, Essbase will add new members to the bottom of the list of membrers, it does not insert them into an existing hierarchy in the right places. If your trying to update existing hierarchies and are going the SQL route, you will need two rules (or 1 rule and a flat file). You also need to specify remove unspecified as part of the dimension build process.
HAve a dummy input (either sql or file) that gets loaded the first time. IT will basically wipe out all the members of the dimension, then your second rule (or same rule calling your SQL) can reload the dimension sorted in alias order.
IT is important that these two rules be done together (either in MaxL using comasin a single statement) or in a BSO cube in the outline before the outline is saved. Otherwise you will have deleted any data that existed in the database. It would be impartant that your SQL also pulls all members (including any special members)
Edited by: GlennS_2 on Jan 6, 2010 9:48 AM
You say you are going to change the stored procedure. That is not necessary, you could put an order by clause in your sql extract statement

Not able to get the Alias Name(Member Description) in FR by using Planning

Hi All,
we are using the 11.1.2 version in my project. While i am developing the FR repots by using planning database i am not able to find the Member name in my report, but i am able to see the option. MemberName, Alias and Both. If i check the Alias or both its giving only member name only.
Any ides on this or any post are there prior this .
Thanks in Advance.
Rao

Rao,
Thanks for the info! It is strange that despite having alias name report is populating member name. It is not the first time strange things hapend with FR.
Can you please check if you are connecting to same data source where you see alias name? Can you pull alias name from SmartView?
Venu

SQL query - Alias name (value) as parameter to an Oracle function

Hi,
I have a sql query something like
Select tbl1.valueA, tbl1.valueB, tbl2.valueX, MAX(CASE tbl2.valueY = 'XX' THEN tbl2.valueZ END) AS "ValueZ header", Function(tbl1.valueB, tbl2.valueX, "valueZ header")
FROM table1 tbl1
JOIN table2 tbl2 ON tbl1.id = tbl2.tbl1id
WHERE ...
my problem is that I need the value from MAX statement as parameter to the function and I have tried to use the alias name (valueZ header) but this is not working. I guess because of some syntax error. Can I use alias name as parameter into the function at all - if - how should I do this?

Hi,
user8819407 wrote:
Hi,
I have a sql query something like
Select tbl1.valueA, tbl1.valueB, tbl2.valueX, MAX(CASE tbl2.valueY = 'XX' THEN tbl2.valueZ END) AS "ValueZ header", Function(tbl1.valueB, tbl2.valueX, "valueZ header")
FROM table1 tbl1
JOIN table2 tbl2 ON tbl1.id = tbl2.tbl1id
WHERE ...
my problem is that I need the value from MAX statement as parameter to the function and I have tried to use the alias name (valueZ header) but this is not working. I guess because of some syntax error. Can I use alias name as parameter into the function at all - if - how should I do this?You can use a column alias in the ORDER BY clause of the same query where it was defined, but that's the only place where you can use it in that query.
You could repeat the entire MAX (CASE ...) expression as the 3rd argumnet to your function, or you could compute it once in a sub-query, then reference the column alias as often as you like in the super-query, like this:
WITH     got_valuez_header     AS
     Select tbl1.valueA
     ,     tbl1.valueB
     ,     tbl2.valueX
     ,     MAX ( CASE
                        WEHN tbl2.valueY = 'XX'     -- Don't forget the keyword WHEN
                  THEN      tbl2.valueZ
                END
              )          AS "ValueZ header"
     FROM         table1     tbl1
     JOIN         table2     tbl2     ON     tbl1.id     = tbl2.tbl1id
     WHERE          ...
     GROUP BY     ...
Select tbl1.valueA
,     tbl1.valueB
,     tbl2.valueX
,     "ValueZ header"
,     Function_x ( tbl1.valueB     -- FUNCTION is not a good name for a function
             , tbl2.valueX
             , "ValueZ header"     -- Case-sensitive
FROM    got_valuez_header
;

How can i use this alias name Day1 br 06/09/2005 without " "

From my application (asp.net), i don't know how to pass alias name "Day1<br>06/09/2005"(with " ")
I this possible anyother way to use this Day1<br>06/09/2005 alias name without using " "
select sum(count) Day1<br>06/09/2005 from test
Millions of thanks in advacne..

if your alias name for a column contains spaces, it needs to be enclosed in double-quotes.
is there a real need to have such a column heading? what is the problem in enclosing the alias name in double-quotes?
SQL*Plus has no problem displaying such a column heading? what issue are you encountering?
SQL> select sum(sal) "Day1 06/09/2005" from emp ;
Day1 06/09/2005
29025
1 row selected.
SQL>

How to get alias name of stored certificate from iKey token 2032

Hi All,
Below is my code woks well to use the same keypair for both encrypt/decryprt-SunPKCS#11 in SDK1.5. In my code i hard coded alias name of certificate, kindly tell me how to read alias name of certificate from iKey token 2032??
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
import java.math.*;
import java.security.*;
import java.security.cert.*;
import java.security.interfaces.*;
import javax.crypto.interfaces.*;
import javax.net.ssl.*;
import javax.crypto.*;
import javax.crypto.spec.DESKeySpec;
import java.security.KeyStore.*;
public class Encrypt
public Encrypt(){}
public void loginToken() {
Provider p = new sun.security.pkcs11.SunPKCS11(MQConfig.getvalue("SecurityPropertyPath"));
String myAlias = "349eefd1-845b-4ba4-9f88-06e9f5cb82f6";
/** to view alias name
keytool -list -v -keystore NONE -storetype PKCS11 -storepass PASSWORD
Security.addProvider(p);
KeyStore ks = null;
PrivateKey privKey = null;
PublicKey pubKey = null;
try{
String password = General.ReadFiles(MQConfig.getvalue("logFilePath"),"Simple");
password = password.trim();
char pin[] = password.toCharArray();
ks = KeyStore.getInstance("pkcs11");
ks.load(null,pin);
java.security.cert.Certificate cert = ks.getCertificate(myAlias);
Key key = ks.getKey(myAlias, pin);
if(PrivateKey.class.isInstance(key)) {
privKey = (PrivateKey)key;
pubKey = cert.getPublicKey();
FileInputStream in = new FileInputStream("C:\\ReportDBBE.properties");
FileOutputStream out = new FileOutputStream("C:\\ReportDBAE.properties");
Cipher cp=Cipher.getInstance("RSA/ECB/PKCS1Padding", p);
cp.init(cp.ENCRYPT_MODE,pubKey);
CipherOutputStream cout=new CipherOutputStream(out,cp);
byte[] input=new byte[8];
int byteread=in.read(input);
while(byteread!=-1){
cout.write(input,0,byteread);
byteread=in.read(input);
cout.flush();
in.close();
cout.close();
catch(NoSuchAlgorithmException nsae)
System.out.println("No Such Algorithm Exception " + nsae.getMessage());
catch(NoSuchPaddingException nspe)
System.out.println("No Such Padding Exception " + nspe.getMessage());
catch(InvalidKeyException ike)
System.out.println("Invalid Key Exception " + ike.getMessage());
ike.printStackTrace();
catch(IllegalStateException ise)
System.out.println("Illegal State Exception " + ise.getMessage());
catch(KeyStoreException kse)
System.out.println("Key Store Exception " + kse.getMessage());
catch(CertificateException ce)
System.out.println("Certificate Exception " + ce.getMessage());
catch(IOException ioe)
System.out.println("IO Exception " + ioe.getMessage());
catch(UnrecoverableKeyException unrke)
System.out.println("Unrecoverable Key Exception " + unrke.getMessage());
public static void main (String args[]) throws Exception {
try{
Encrypt tl = new Encrypt();
tl.loginToken();
}catch(Exception e){
e.printStackTrace();
Your help is very much appreciated!!!!

Hi All,
Now i managed to get alias name.
          char pin[] = password.toCharArray();
          ks = KeyStore.getInstance("pkcs11");
          ks.load(null,pin);
Enumeration ea = ks.aliases();
          while(ea.hasMoreElements()) {
          myAlias = (String)ea.nextElement();
          }

Issue with Column Alias Name in a SELECT statement

I am trying to run sql query(IN ORACLE) to get the data from a remote database(TERADATA). The query is
select (table1.exp_date - table1.setup_date) AS day_diff,
CASE
WHEN day_diff = '0'
THEN 'YES'
WHEN day_diff > '0'
THEN 'NO'
ELSE 'Unknown'
END AS alias_type
from table1@remote_database_name;
The query is running fine when I run it in TERADATA environment directly without the remote database link since it is not necessary. If I run the above query in Oracle I am getting an error ORA-00904: invalid identifier.(this error is pointing to day_diff alias name)
Can anyone help me with this?
Thanks

The Column alias can be used in the ORDER BY clause, but not other clauses,like WHERE clause, in the query.
Use..
select (table1.exp_date - table1.setup_date) AS day_diff,
CASE
WHEN (table1.exp_date - table1.setup_date) = '0'
THEN 'YES'
WHEN (table1.exp_date - table1.setup_date) > '0'
THEN 'NO'
ELSE 'Unknown'
END AS alias_type

Dynamic alias name in query

Is it possible to use dynamic alias name in query for interactive report?
I have this SELECT and I would like to use the parameters used in alias request to build a dynamic crosstab report:
SELECT p.annee AS "Année", p.desc_rls AS "RLS",
SUM(CASE WHEN p.age BETWEEN :P2_AGE1 AND :P2_AGE2 THEN p.pop END) "0-4 ANS",
SUM(CASE WHEN p.age BETWEEN :P2_AGE3 AND :P2_AGE4 THEN p.pop END) "5-9 ANS",
SUM(CASE WHEN p.age BETWEEN :P2_AGE5 AND :P2_AGE6 THEN p.pop END) "10-14 ANS"
FROM pop_rls_isq_111 p
GROUP BY ROLLUP(p.annee, p.desc_rls);
Instead of coding "0-4 ANS" as alias, I would like for example use the parameters ":P2_AGE1 - :P2_AGE2 ANS".

Hi,
to make your column headings dynamic you can use the substitution syntax in the "Column Heading" property of your IR columns. For example:
&P2_AGE1. - &P2_AGE2. ANSHope that helps
Patrick
My blog: http://www.oracleapex.info/
New Check out the Oracle APEX Essentials!

Alias names couldn't be shown on Prompt window or POV

Similar Messages

Maybe you are looking for