Alias /sapterm not working
Hi all,
I have been looking through the ECC 5 Installation Guides and they seem to mention at the end of the guide that there is an SAP Terminology Guide at http://service.sap.com/sapterm
It did not work, it says invalid alias. I thought SAP might have removed the alias.
But now I noticed ECC 6 Install Guides say the same thing.
The link http://service.sap.com/sapterm however, does not work still.
Anyone can provide me some clue on where can I get the SAP Terminology Guide Document?
Hi,
Check this link this may help you http://help.sap.com/saphelp_47x200/helpdata/en/df/6d68bad41611d3b29b0050da3f31b1/frameset.htm
Similar Messages
-
Group by with column alias does not work?
Hello,
The column alias is not working in the group clause?
select col1,col2-col3 "col23", sum(col4)
from table1
group by col1,col23
Error is col23 is invalid identifier.
Thank you.I guess it's the double quotes around bonus:
SQL> select empno, deptno, sum(bonus)
2 from
3 (
4 select empno, (sal + 500) bonus, deptno
5 from emp
6 )
7 group by empno, deptno
8 ;
EMPNO DEPTNO SUM(BONUS)
7900 30 1450
7369 20 1300
7499 30 2100
7521 30 1750
7566 20 3475
7654 30 1750
7698 30 3350
7782 10 2950
7788 20 3500
7839 10 5500
7844 30 2000
7876 20 1600
7902 20 3500
7934 10 1800
14 rows selected. -
Ichat + netword device alias / ip-alias == AV not working
I have public IP address on my iMac. I also have local network running in 192.168.123.0/24. My network is only using WLAN so primary Airport is using dhcp to get public IP and my created alias aka Airport 2 is using static IP.
Everything else works great, but iChat AV is not working.
Having NAT or using cable for another network is not a solution.Ok,
So a Network could be an Ethernet cable through Bridge devices to give you a Public IP. (A Wireless LAN Could do the same thing)
An Airport Card could then use an IP from another network.
Even in this scenario iChat can not tell which Network to use.
You seem to be saying you have two Wireless networks going on with the same card.
iChat does not work with Internet Sharing in System Preferences > Sharing being ON or Parallels Sharing an IP
I am not sure what you are trying to achieve with your set up but iChat is not going to like it.
3:20 PM Saturday; November 24, 2007 -
System alias does not work if not the same as logical system name?
In most of the situations, we define the portal system alias same as the connected R/3 client logical system name.
I also saw some exceptions that system aliases were defined differently from the connected R/3 client logical systems, and they were tested fine.
However I forget the way to make that working.
Could you help me recall how is that achieved?
Thanks!Hi,
There is nothing tricky here. Just assign more System Aliases to the system connector ! -
I have the latest version of OSX running Powerbook and XP on a dell. I can see the dell on the network but when I click on it it tells me invalid alias. It can't fix it nore delete it???? I get an error message in either way. When I tried to delete it it tells I don't have previleges on the XP machine but I have administrator privs on both sides.
Any ideas ?
gsFirst, make sure your administrator account on the Windows machine has a password. This is required to connect remotely.
Next, try connecting to your Windows machine by its name or IP address. On the Mac, select Connect To Server... from the Go menu and enter "smb://computername" or "smb://IPaddress".
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.6) -
Application Alias not working with Global Single Sig on
I have a intranet applications, with login against https://login.oracle.com that is working fine. However, when I try to use the Application Alias, defined on Applications Attributes, it's not working, redirecting to an invalid page:
https://htmldb.oraclecorp.com/pls/htmldb/-PORTAL_SSO-
How can I make this work, I mean, using alias, instead of applications number?
Thanks in advance,
Andre SilveiraAndre,
Assuming your application's ID is 9999 and its alias is AAAA, you may be finding that a request like f?p=9999 and f?p=AAAA produce the same results, those you described. When using SSO as the authentication scheme, it's necessary to provide the page ID or page alias in the URL also, e.g, f?p=AAAA:PPPP or f?p=AAAA:1.
Scott -
SSO is not working for an Alias URL but is working for original portal URL
Hello,
We have a BSP running inside the portal and expects authentication.
When I run this BSP using the portal regular address everything is working OK and SSO is working after logging into the portal.
At next step, we have configured an alias for the portal URL at the DNS Server.
When activating the BSP from the alias URL it asks for 2nd authentication. Meaning, SSO is not working after logging into the portal.
I have activated an HTTP trace in order to see why and it seems like when running it from the alias name it recognizes it as a different domain and I assume this is why the authentication is coming up.
I would like to suppress this for the alias URL but don't know how.
I found this UME property on the server:ume.logon.security.relax_domain.level
This UME property controls the amount of sub domains to remove from the server name to obtain the domain for which the logon ticket is valid.
I have changed this property from its default value 1 to 3 (and restarted the server of course) which, in our case, leaves only ourCompany.com for the ticket in the original server URL. Yet, the authentication pop up is still not supressed when browsing through the alias URL.
Any idea what can I do next?
Thanks,
RoyHi Dezso,
I found the 401 let me know if I look on it right:
I have an entry node with two subnodes: request and response.
The response has:
<responseStatus>HTTP/1.1 401 Unauthorized</responseStatus>
And the request before that doesn't have any MYSAPSSO2 in it, all it has which is related to cookies is this:
<header name="Cookie">UserUniqueIdentifier=1174345919524; alreadyLogged=1179560552416</header>
<cookies>
<cookie name="alreadyLogged">1179560552416</cookie>
<cookie name="UserUniqueIdentifier">1174345919524</cookie>
</cookies>
Can you advice what to do next? -
Code completion does not work with table alias
Hi all,
When i use SQL developer to create a simple query like below i alias my tables so i can oversee it better.
select
* from PRODUCTS p
inner join PRODUCT_TYPES pt on PRODUCT_TYPES.PRODUCT_TYPE_ID = p.But when i give the driving table a alias like p and i try to do a join like you see in the code SQL developer will not show the columns from table PRODUCTS.
What do i wrong or is this a bug?
Thanks in advance,
DanielHi,
Sue, there are lots of code completion don't work either.
Some of them are :
1. The code completion seems not working if we put double-quote ("") to enclosed the object name.
SELECT t. -- CTRL+Space the code completion won't work here
FROM MYSCHEMA."MYTABLE" t 2. The code completion also not working if we state some characters of the column name, although it still works for the uncomplete object name
i.e the name of the column is : MYFIELD
SELECT t.MY -- CTRL+Space, the code completion won't work here
FROM MYSCHEMA.MYTABLE t 3. Sometimes, I can see two code completion lists when I use CTRL + Space
Usually, it happens on the first connection's SQL Worksheet, the second and so forth are fine.
SELECT t. -- CTRL+Space, shows two lists which I can choose both of them
FROM MyTable t4. Code completion also not working when we try to access object from other schema. tbeech post it on
Re: Code Assist -- Table Alias
Are those code completion bugs are also logged?
Regards,
Buntoro -
I have a MobileMe account with multiple aliases, I was told and read that I would be able to send from my mobileme alias with iOS4, however, I do not have the "FROM" option when composing an email. Anyone have any idea why this new feature is not working for me.
Yes, I have all my info filled out under my aliases in settings.
Thanks in advanceThis wasn't working for me as well... at first.
I read a response (in some other thread) indicating that I needed to fill out all of the fields for each alias, and the main account, in the web email's Preferences screen. So I did that -- and still nothing. This sounds like where you are right now, eh?
While puzzling this out, on my phone, I experimentally switched my default email account to a different one... and then back to my mobileme account. When I went back to Mail... after waiting a few moments for a spinning wheel to go away... I opened a new email and discovered my aliases were now there. I don't know, frankly, if I fixed it... or if I just stalled long enough for it to start working on its own... but it's now working.
... sort of ...
Only the .mac form of my aliases are listed (which is goofy, but workable).
I went back to settings, to see if I could now change my default email account to be one of the aliases... no dice on that either. Oh well... we're getting closer. -
In .profile, why is alias not working?
Recently (since upgrading to Mavericks??), several alias commands in ~/.profile are not working after I start Terminal (although numerous path settings set up there are working as expected). For example, ~/.profile includes:
alias mysqlctl='sudo /usr/local/mysql/support-files/mysql.server'
alias mysqlstart='mysqlctl start'
But after I start Terminal and execute
mysqlstart
I get error:
bash: mysqlstart: command not found
I know that something peculiar is going on because when I attempt to exit the (one and only) running Terminal session with command exit I just see an echoed response
exit
but can quit Terminal by executing the same exit command again.
Moreover, if in Terminal I execute
source ~/.profile
then the aliases work as expected.
I did try the ruse I found somwhere of including before any of the other alias lines in .profile the command alias sudo='sudo ' but that doesn't fix the problem.
I thought perhaps some other startup file is being read and hence commands in ~/.profile are therefore not being executed, but I find no such: I have no
~/.bashrc or ~/.bash_profile or ~/.login file. (And Terminal is set to use the default login shell, which is bash.
What could be wrong and how can it be fixed?I tried the method recommended at http://stackoverflow.com/questions/18773051/how-to-make-os-x-to-read-bash-profil e-not-profile-file, namely, to move all the commands formerly in ~/.profile into ~/.bashrc and then to create ~/.bash_profile consisting of lines:
if [ -f ~/.bashrc ]; then
source ~/.bashrc
fi
(And of course delete ~/.profile).
That does now allow my alias commands (formerly in ~/.profile and now in ~/.bashrc) to work in Terminal.
However, now executing in Terminal echo $PATH gives my entire path (as defined in ~/.bashrc) twice -- in a rather strange order of duplication:
/usr/local/mysql/bin
/usr/texbin
/opt/local/bin
/opt/local/sbin
/opt/local/apache2/bin
/usr/local/mysql/bin
/usr/texbin
/opt/local/bin
/opt/local/sbin
/opt/local/apache2/bin
/usr/bin
/bin
/usr/sbin
/sbin
/usr/local/bin
/opt/X11/bin
/usr/local/MacGPG2/bin
/usr/texbin
/Library/Frameworks/Python.framework/Versions/3.3/bin
/Library/Frameworks/Python.framework/Versions/2.7/bin
/Volumes/MacHD/Applications/Programming/Python/anaconda/bin
/Volumes/MacHD/Users/murray/Library/Application Support/GoodSync
/Volumes/MacHD/Users/murray/bin
/Volumes/MacHD/Applications/Math/Singular/3-1-6/ix86Mac-darwin
/Library/Frameworks/Python.framework/Versions/3.3/bin
/Library/Frameworks/Python.framework/Versions/2.7/bin
/Volumes/MacHD/Applications/Programming/Python/anaconda/bin
/Volumes/MacHD/Users/murray/Library/Application Support/GoodSync
/Volumes/MacHD/Users/murray/bin
/Volumes/MacHD/Applications/Math/Singular/3-1-6/ix86Mac-darwin
So something is still wrong! -
Hi I need ur help actually my iPhone 5 is not working properly I been to apple store they said u have to booked online for repair but I couldn't find where to register plz help out thx ali
Dollersheikh wrote:
... I been to apple store ...
Go to that Apple Retail Stores website and click on Make a Reservation...
Here's an example...
http://www.apple.com/retail/crossgates/
Store List here > http://www.apple.com/retail/storelist/ -
Help with Xcode 3.2.6 with ios sdk 4.3: will not work...
So I recenty upgraded my Mac to OS X Snow Leopard (10.6.8) and the xcode that came with it would not work effectively. I just downloaded xcode 3.2.6 with ios sdk 4.3 from Apple and installed them (after having to change the date to 2011). Xcode worked but opening the interface builder resulted in a blank window opening, not the actual interface builder. So then I tried to reinstall the .dmg file of xcode and ios sdk, which was again successful, but when I click on any of the applications it installs to open them I get an error. This is what happens when trying to open xcode:
Process: Xcode [4609]
Path: /Users/myname/Desktop/Xcode.app/Contents/MacOS/Xcode
Identifier: com.apple.Xcode
Version: ??? (???)
Build Info: DevToolsIDE-18070000~38
Code Type: X86 (Native)
Parent Process: launchd [92]
Date/Time: 2012-07-21 23:18:17.358 -0400
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 3537 sec
Crashes Since Last Report: 13
Per-App Crashes Since Last Report: 13
Anonymous UUID: F17937FB-B272-4B47-811F-333D66AB2B3B
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @rpath/DevToolsFoundation.framework/Versions/A/DevToolsFoundation
Referenced from: /Users/myname/Desktop/Xcode.app/Contents/MacOS/Xcode
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4163b dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
Model: MacBook1,1, BootROM MB11.0061.B03, 2 processors, Intel Core Duo, 1.83 GHz, 1 GB, SMC 1.4f12
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplays_integrated_vram
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x86), Atheros 5424: 2.1.14.6
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2120BH, 111.79 GB
Parallel ATA Device: MATSHITACD-RW CW-8221
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0217, 0x1d200000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8240, 0x5d200000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x7d100000 / 2
Can anyone please help me? Ps, I've changed the directory location to "myname" for security reasons;p so that is not the problemThe error message is telling you that the linker is looking for the Xcode executable on your desktop and can't find it. Where did you install Xcode? The default location is in /Developer.
It sounds like you have an outdated alias to Xcode on your desktop. Can you launch Xcode if you navigate to Xcode in the Finder and launch it from there? -
Weblogic Http Apache Plugin not working
Hi,
I have installed weblogic server 10.3 on WindowsXP Professional and Http Apache 2.2 is running on port 80. I followed the following document to configure the Apache plugin:
http://e-docs.bea.com/wls/docs103/plugins/apache.html
but when I go and test the plugin it always comes back with 404 page not found. As per the documentation I am testing it as
http://localhost:80/weblogic/
Here is my httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule weblogic_module modules/mod_wl_22.so
<IfModule mod_weblogic.c>
WebLogicHost localhost
WebLogicPort 7001
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName localhost:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
ProxyRequests On
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error.log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "logs/access.log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://localhost/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock logs/cgisock
</IfModule>
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>Is there anything else I need to add to this file. As I am trying to install ALUI and for this I need to add the plugin as when I go to my portal page none of the
images shows. Any help is appreciated.
ThanksHi,
There is patch for the webserver(Apache Plugin),thats needs to be downloaded from Metalink,dont use the default plugin that comes with the weblogic 10.3 installtion.
Regards,
Dinesh -
NVIDIA driver not working on HP envy dv7
Hi,
i trying to install nvidia official driver to my HP envy dv7 laptop.
Two wasted nights without success.
I trying newest version from nvidia.com and from pacman.
Result is same in both cases - black screen, high cpu temperatures, no video output.
Pasted logs are from pacman version.
Thank you for help !
uname -a :
$ uname -a
Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
lspci | grep VGA
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1)
modinfo nvidia
$modinfo nvidia
filename: /lib/modules/3.13.5-1-ARCH/extramodules/nvidia.ko.gz
alias: char-major-195-*
version: 331.38
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends: drm,i2c-core
vermagic: 3.13.0-1-ARCH SMP preempt mod_unload modversions
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_RemapLimit:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_RMEdgeIntrCheck:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_CheckPCIConfigSpace:int
parm: NVreg_EnablePCIeGen3:int
parm: NVreg_EnableMSI:int
parm: NVreg_MemoryPoolSize:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_AssignGpus:charp
pacman -Qi nvidia
$pacman -Qi nvidia
Name : nvidia
Version : 331.38-3
Description : NVIDIA drivers for linux
Architecture : x86_64
URL : http://www.nvidia.com/
Licenses : custom
Groups : None
Provides : None
Depends On : linux>=3.13 linux<3.14 nvidia-libgl nvidia-utils=331.38
Optional Deps : None
Required By : None
Optional For : bumblebee
Conflicts With : nvidia-96xx nvidia-173xx
Replaces : None
Installed Size : 4642.00 KiB
Packager : Thomas Bächler <[email protected]>
Build Date : Sun 26 Jan 2014 10:22:40 AM UTC
Install Date : Wed 26 Feb 2014 05:45:32 PM UTC
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature
nvidia-xconfig --query-gpu-info
$nvidia-xconfig --query-gpu-info
Number of GPUs: 1
GPU #0:
Name : GeForce GT 630M
UUID : GPU-172f9afb-954f-a30c-b9e1-016f89943947
PCI BusID : PCI:1:0:0
Number of Display Devices: 1
Display Device 0 (CRT-0):
No EDID information available.
xorg.0.log
[ 2028.379]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 2028.394] X Protocol Version 11, Revision 0
[ 2028.399] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 2028.407] Current Operating System: Linux localhost 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64
[ 2028.407] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
[ 2028.423] Build Date: 09 January 2014 08:47:24AM
[ 2028.431]
[ 2028.439] Current version of pixman: 0.32.4
[ 2028.456] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2028.456] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2028.498] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 26 18:29:34 2014
[ 2028.510] (==) Using config file: "/etc/X11/xorg.conf"
[ 2028.522] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2028.535] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2028.548] (==) ServerLayout "Layout0"
[ 2028.561] (**) |-->Screen "Screen0" (0)
[ 2028.574] (**) | |-->Monitor "Monitor0"
[ 2028.587] (**) | |-->Device "Device0"
[ 2028.601] (**) |-->Input Device "Keyboard0"
[ 2028.615] (**) |-->Input Device "Mouse0"
[ 2028.629] (==) Automatically adding devices
[ 2028.643] (==) Automatically enabling devices
[ 2028.658] (==) Automatically adding GPU devices
[ 2028.673] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2028.688] Entry deleted from font path.
[ 2028.704] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2028.721] Entry deleted from font path.
[ 2028.738] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2028.756] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2028.774] Entry deleted from font path.
[ 2028.792] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2028.869] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 2028.889] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2028.910] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2028.931] (WW) Disabling Keyboard0
[ 2028.952] (WW) Disabling Mouse0
[ 2028.974] (II) Loader magic: 0x804c80
[ 2028.995] (II) Module ABI versions:
[ 2029.017] X.Org ANSI C Emulation: 0.4
[ 2029.039] X.Org Video Driver: 15.0
[ 2029.062] X.Org XInput driver : 20.0
[ 2029.084] X.Org Server Extension : 8.0
[ 2029.107] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2029.109] (--) PCI:*(0:0:2:0) 8086:0166:103c:181d rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[ 2029.134] (--) PCI: (0:1:0:0) 10de:0de9:103c:181d rev 161, Mem @ 0xd2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[ 2029.186] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2029.213] Initializing built-in extension Generic Event Extension
[ 2029.240] Initializing built-in extension SHAPE
[ 2029.267] Initializing built-in extension MIT-SHM
[ 2029.295] Initializing built-in extension XInputExtension
[ 2029.322] Initializing built-in extension XTEST
[ 2029.349] Initializing built-in extension BIG-REQUESTS
[ 2029.377] Initializing built-in extension SYNC
[ 2029.404] Initializing built-in extension XKEYBOARD
[ 2029.432] Initializing built-in extension XC-MISC
[ 2029.459] Initializing built-in extension SECURITY
[ 2029.486] Initializing built-in extension XINERAMA
[ 2029.512] Initializing built-in extension XFIXES
[ 2029.538] Initializing built-in extension RENDER
[ 2029.564] Initializing built-in extension RANDR
[ 2029.589] Initializing built-in extension COMPOSITE
[ 2029.615] Initializing built-in extension DAMAGE
[ 2029.640] Initializing built-in extension MIT-SCREEN-SAVER
[ 2029.665] Initializing built-in extension DOUBLE-BUFFER
[ 2029.688] Initializing built-in extension RECORD
[ 2029.711] Initializing built-in extension DPMS
[ 2029.734] Initializing built-in extension Present
[ 2029.756] Initializing built-in extension DRI3
[ 2029.778] Initializing built-in extension X-Resource
[ 2029.800] Initializing built-in extension XVideo
[ 2029.821] Initializing built-in extension XVideo-MotionCompensation
[ 2029.842] Initializing built-in extension XFree86-VidModeExtension
[ 2029.863] Initializing built-in extension XFree86-DGA
[ 2029.883] Initializing built-in extension XFree86-DRI
[ 2029.903] Initializing built-in extension DRI2
[ 2029.923] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 2029.923] (II) LoadModule: "glx"
[ 2029.964] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2029.993] (II) Module glx: vendor="NVIDIA Corporation"
[ 2029.993] compiled for 4.0.2, module version = 1.0.0
[ 2030.034] Module class: X.Org Server Extension
[ 2030.055] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
[ 2030.076] Loading extension GLX
[ 2030.077] (II) LoadModule: "nvidia"
[ 2030.120] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2030.142] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2030.142] compiled for 4.0.2, module version = 1.0.0
[ 2030.185] Module class: X.Org Video Driver
[ 2030.207] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
[ 2030.229] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2030.251] (II) NVIDIA X compatibility module for ABI 15.0 built from xorg-server-1.14.99.901
[ 2030.273] (II) X log verbosity: 5
[ 2030.315] (--) using VT number 1
[ 2030.462] (II) Loading sub module "fb"
[ 2030.462] (II) LoadModule: "fb"
[ 2030.462] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2030.462] (II) Module fb: vendor="X.Org Foundation"
[ 2030.462] compiled for 1.15.0, module version = 1.0.0
[ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2030.462] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 2030.462] (II) Loading sub module "wfb"
[ 2030.462] (II) LoadModule: "wfb"
[ 2030.462] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2030.462] (II) Module wfb: vendor="X.Org Foundation"
[ 2030.462] compiled for 1.15.0, module version = 1.0.0
[ 2030.462] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2030.462] (II) Loading sub module "ramdac"
[ 2030.462] (II) LoadModule: "ramdac"
[ 2030.462] (II) Module "ramdac" already built-in
[ 2030.462] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 2030.462] (==) NVIDIA(0): RGB weight 888
[ 2030.462] (==) NVIDIA(0): Default visual is TrueColor
[ 2030.463] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2030.463] (==) NVIDIA(0): Using HW cursor
[ 2030.463] (==) NVIDIA(0): Video key set to default value of 0x101fe
[ 2030.463] (==) NVIDIA(0): Not mapping the primary surface by default.
[ 2030.463] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP-0"
[ 2030.463] (**) NVIDIA(0): Enabling 2D acceleration
[ 2030.463] (**) NVIDIA(0): ConnectedMonitor string: "DFP-0"
[ 2030.588] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
[ 2030.588] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 2030.589] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630M (GF108) at PCI:1:0:0 (GPU-0)
[ 2030.589] (II) NVIDIA(0): GPU UUID: GPU-172f9afb-954f-a30c-b9e1-016f89943947
[ 2030.589] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 2030.589] (II) NVIDIA(0): Board ID: 0xce4e
[ 2030.589] (II) NVIDIA(0): Chip SKU: 770
[ 2030.589] (II) NVIDIA(0): Chip SKU Mod: 1
[ 2030.589] (II) NVIDIA(0): Project: 1303
[ 2030.589] (II) NVIDIA(0): Project SKU: 0000
[ 2030.589] (II) NVIDIA(0): GPU RAM Type: DDR3
[ 2030.589] (--) NVIDIA(0): VideoBIOS: 70.08.b9.00.0b
[ 2030.589] (--) NVIDIA(0): Found 2 heads on board
[ 2030.589] (II) NVIDIA(0): Supported display device(s): CRT-0
[ 2030.589] (II) NVIDIA(0): Bus detected as PCI Express
[ 2030.589] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 2030.589] (II) NVIDIA(0): SPS : 1
[ 2030.589] (II) NVIDIA(0): User configuration of GPU PowerMizer is supported
[ 2030.589] (II) NVIDIA(0):
[ 2030.591] (--) NVIDIA(0): Valid display device(s) on GeForce GT 630M at PCI:1:0:0
[ 2030.591] (--) NVIDIA(0): CRT-0 (boot, connected)
[ 2030.591] (--) NVIDIA(0): CRT-0 Name Aliases:
[ 2030.591] (--) NVIDIA(0): CRT
[ 2030.591] (--) NVIDIA(0): CRT-0
[ 2030.591] (--) NVIDIA(0): DPY-0
[ 2030.591] (--) NVIDIA(0): VGA-0
[ 2030.591] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 2030.591] (--) NVIDIA(0):
[ 2030.591] (--) NVIDIA(0): --- EDID for CRT-0 ---
[ 2030.591] (--) NVIDIA(0):
[ 2030.591] (--) NVIDIA(0): No EDID Available.
[ 2030.591] (--) NVIDIA(0):
[ 2030.591] (--) NVIDIA(0): --- End of EDID for CRT-0 ---
[ 2030.591] (--) NVIDIA(0):
[ 2030.591] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2030.591] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 2030.591] (**) NVIDIA(0): all display devices.)
[ 2030.591] (II) NVIDIA(0): Frequency information for CRT-0:
[ 2030.591] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
[ 2030.591] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
[ 2030.591] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
[ 2030.591] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
[ 2030.593] (II) NVIDIA(GPU-0):
[ 2030.593] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
[ 2030.593] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
[ 2030.593] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
[ 2030.593] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
[ 2030.593] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
[ 2030.593] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
[ 2030.593] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
[ 2030.593] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
[ 2030.593] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
[ 2030.593] (II) NVIDIA(GPU-0):
[ 2030.593] (II) NVIDIA(0): Display device(s) assigned to X screen 0:
[ 2030.593] (II) NVIDIA(0): CRT-0
[ 2030.593] (==) NVIDIA(0):
[ 2030.593] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 2030.593] (==) NVIDIA(0): will be used as the requested mode.
[ 2030.593] (==) NVIDIA(0):
[ 2030.593] (II) NVIDIA(0): Requested modes:
[ 2030.593] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 2030.593] (II) NVIDIA(0): Validated MetaModes:
[ 2030.593] (II) NVIDIA(0): MetaMode "CRT-0:nvidia-auto-select":
[ 2030.593] (II) NVIDIA(0): Size: 1024 x 768
[ 2030.593] (II) NVIDIA(0): CRT-0: "nvidia-auto-select"
[ 2030.593] (II) NVIDIA(0): Size : 1024 x 768
[ 2030.593] (II) NVIDIA(0): Offset : +0 +0
[ 2030.593] (II) NVIDIA(0): Panning
[ 2030.593] (II) NVIDIA(0): Domain : 1024 x 768
[ 2030.593] (II) NVIDIA(0): Tracking Area: 1024 x 768 +0 +0
[ 2030.593] (II) NVIDIA(0): Border : 0,0,0,0
[ 2030.593] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_60"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 800x600_56"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 640x480"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 512x384"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 400x300"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: 320x240"
[ 2030.594] (II) NVIDIA(0): Adding implicit MetaMode: "VGA-0: nvidia-auto-select { ViewPortIn = 1024 x 576, ViewPortOut = 1024 x 576 + 0 + 96 }"
[ 2030.596] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 2030.596] (WW) NVIDIA(0): from CRT-0's EDID.
[ 2030.596] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 2030.596] (--) Depth 24 pixmap format is 32 bpp
[ 2030.597] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 2030.597] (II) NVIDIA: access.
[ 2030.599] (II) NVIDIA(0): kernel module enabled successfully
[ 2030.599] (II) NVIDIA(0): GPU initialized
[ 2030.599] (II) NVIDIA(0): ACPI: AC state file path: /sys/class/power_supply/ADP1/online
[ 2030.599] (II) NVIDIA(0): ACPI: the system is running on battery power
[ 2030.599] (II) NVIDIA(0): ACPI: dock file path: /sys/devices/platform//dock.0/docked
[ 2030.599] (II) NVIDIA(0): ACPI: the system is undocked
[ 2030.599] (II) NVIDIA(0): Registered for mobile display change hotkey events.
[ 2030.602] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 2030.619] (II) NVIDIA(0): First mode initialized
[ 2030.624] (==) NVIDIA(0): Using 8388608 bytes for software rendering cache
[ 2030.629] (II) NVIDIA(0): Using built-in logo image.
[ 2030.629] (II) NVIDIA(0): Logo is 744x537 with depth 24.
[ 2030.641] Loading extension NV-GLX
[ 2030.689] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 2030.689] (II) NVIDIA(0): Visuals set up
[ 2030.689] (II) NVIDIA(0): Pixmap depths set up
[ 2030.690] (II) NVIDIA(0): GLX visuals set up
[ 2030.690] (II) NVIDIA(0): Framebuffer set up
[ 2030.690] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2030.690] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 2030.690] (==) NVIDIA(0): Backing store enabled
[ 2030.690] (==) NVIDIA(0): Silken mouse enabled
[ 2030.690] (II) NVIDIA(0): Default colormap initialized.
[ 2030.690] (II) NVIDIA(0): Palette loaded
[ 2030.690] (**) NVIDIA(0): DPMS enabled
[ 2030.690] Loading extension NV-CONTROL
[ 2030.690] Loading extension XINERAMA
[ 2030.690] (II) NVIDIA(0): Loading NVIDIA Xinerama information
[ 2030.690] (II) Loading sub module "dri2"
[ 2030.690] (II) LoadModule: "dri2"
[ 2030.690] (II) Module "dri2" already built-in
[ 2030.690] (II) NVIDIA(0): [DRI2] Setup complete
[ 2030.690] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2030.690] (II) NVIDIA(0): Screen initialization complete
[ 2030.690] (--) RandR disabled
[ 2030.695] (II) Initializing extension GLX
[ 2030.726] (II) XKB: Reusing cached keymap
[ 2030.728] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2030.728] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2030.728] (II) LoadModule: "evdev"
[ 2030.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2030.728] (II) Module evdev: vendor="X.Org Foundation"
[ 2030.728] compiled for 1.15.0, module version = 2.8.2
[ 2030.728] Module class: X.Org XInput Driver
[ 2030.728] ABI class: X.Org XInput driver, version 20.0
[ 2030.728] (II) Using input driver 'evdev' for 'Power Button'
[ 2030.728] Option "XkbRules" "evdev"
[ 2030.728] Option "XkbModel" "pc104"
[ 2030.728] Option "XkbLayout" "us"
[ 2030.728] Option "_source" "server/udev"
[ 2030.728] Option "name" "Power Button"
[ 2030.728] Option "path" "/dev/input/event2"
[ 2030.728] Option "device" "/dev/input/event2"
[ 2030.728] Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[ 2030.728] Option "driver" "evdev"
[ 2030.728] (**) Power Button: always reports core events
[ 2030.728] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2030.729] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2030.729] (--) evdev: Power Button: Found keys
[ 2030.729] (II) evdev: Power Button: Configuring as keyboard
[ 2030.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[ 2030.729] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2030.729] (**) Option "xkb_rules" "evdev"
[ 2030.729] (**) Option "xkb_model" "pc104"
[ 2030.729] (**) Option "xkb_layout" "us"
[ 2030.748] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2030.748] (II) No input driver specified, ignoring this device.
[ 2030.748] (II) This device may have been added with another device file.
[ 2030.748] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 2030.748] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event7)
[ 2030.748] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
[ 2030.748] (II) Using input driver 'evdev' for 'HP Truevision HD'
[ 2030.748] Option "XkbRules" "evdev"
[ 2030.748] Option "XkbModel" "pc104"
[ 2030.748] Option "XkbLayout" "us"
[ 2030.748] Option "_source" "server/udev"
[ 2030.748] Option "name" "HP Truevision HD"
[ 2030.748] Option "path" "/dev/input/event7"
[ 2030.748] Option "device" "/dev/input/event7"
[ 2030.748] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
[ 2030.748] Option "driver" "evdev"
[ 2030.748] (**) HP Truevision HD: always reports core events
[ 2030.748] (**) evdev: HP Truevision HD: Device: "/dev/input/event7"
[ 2030.748] (--) evdev: HP Truevision HD: Vendor 0x5c8 Product 0x33a
[ 2030.748] (--) evdev: HP Truevision HD: Found keys
[ 2030.748] (II) evdev: HP Truevision HD: Configuring as keyboard
[ 2030.748] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event7"
[ 2030.748] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 7)
[ 2030.748] (**) Option "xkb_rules" "evdev"
[ 2030.748] (**) Option "xkb_model" "pc104"
[ 2030.748] (**) Option "xkb_layout" "us"
[ 2030.748] (II) XKB: Reusing cached keymap
[ 2030.749] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 2030.749] (II) No input driver specified, ignoring this device.
[ 2030.749] (II) This device may have been added with another device file.
[ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 2030.749] (II) No input driver specified, ignoring this device.
[ 2030.749] (II) This device may have been added with another device file.
[ 2030.749] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 2030.749] (II) No input driver specified, ignoring this device.
[ 2030.749] (II) This device may have been added with another device file.
[ 2030.749] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4)
[ 2030.749] (II) No input driver specified, ignoring this device.
[ 2030.749] (II) This device may have been added with another device file.
[ 2030.749] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2030.750] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2030.750] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2030.750] Option "XkbRules" "evdev"
[ 2030.750] Option "XkbModel" "pc104"
[ 2030.750] Option "XkbLayout" "us"
[ 2030.750] Option "_source" "server/udev"
[ 2030.750] Option "name" "AT Translated Set 2 keyboard"
[ 2030.750] Option "path" "/dev/input/event0"
[ 2030.750] Option "device" "/dev/input/event0"
[ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2030.750] Option "driver" "evdev"
[ 2030.750] (**) AT Translated Set 2 keyboard: always reports core events
[ 2030.750] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2030.750] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2030.750] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2030.750] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2030.750] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 2030.750] (**) Option "xkb_rules" "evdev"
[ 2030.750] (**) Option "xkb_model" "pc104"
[ 2030.750] (**) Option "xkb_layout" "us"
[ 2030.750] (II) XKB: Reusing cached keymap
[ 2030.750] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 2030.750] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 2030.750] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 2030.750] Option "XkbRules" "evdev"
[ 2030.750] Option "XkbModel" "pc104"
[ 2030.750] Option "XkbLayout" "us"
[ 2030.750] Option "_source" "server/udev"
[ 2030.750] Option "name" "SynPS/2 Synaptics TouchPad"
[ 2030.750] Option "path" "/dev/input/event10"
[ 2030.750] Option "device" "/dev/input/event10"
[ 2030.750] Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
[ 2030.750] Option "driver" "evdev"
[ 2030.750] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2030.750] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event10"
[ 2030.750] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device
[ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[ 2030.750] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 2030.751] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 2030.751] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2030.751] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event10"
[ 2030.751] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 9)
[ 2030.751] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2030.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2030.751] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2030.751] (II) No input driver specified, ignoring this device.
[ 2030.751] (II) This device may have been added with another device file.
[ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
[ 2030.751] (II) No input driver specified, ignoring this device.
[ 2030.751] (II) This device may have been added with another device file.
[ 2030.751] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 2030.751] (II) No input driver specified, ignoring this device.
[ 2030.751] (II) This device may have been added with another device file.
[ 2030.752] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[ 2030.752] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 2030.752] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 2030.752] Option "XkbRules" "evdev"
[ 2030.752] Option "XkbModel" "pc104"
[ 2030.752] Option "XkbLayout" "us"
[ 2030.752] Option "_source" "server/udev"
[ 2030.752] Option "name" "HP WMI hotkeys"
[ 2030.752] Option "path" "/dev/input/event9"
[ 2030.752] Option "device" "/dev/input/event9"
[ 2030.752] Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 2030.752] Option "driver" "evdev"
[ 2030.752] (**) HP WMI hotkeys: always reports core events
[ 2030.752] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
[ 2030.752] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 2030.752] (--) evdev: HP WMI hotkeys: Found keys
[ 2030.752] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 2030.752] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 2030.752] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 10)
[ 2030.752] (**) Option "xkb_rules" "evdev"
[ 2030.752] (**) Option "xkb_model" "pc104"
[ 2030.752] (**) Option "xkb_layout" "us"
[ 2030.752] (II) XKB: Reusing cached keymap
[ 2031.256] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 2031.256] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2031.256] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 2031.256] (**) NVIDIA(0): all display devices.)
[ 2031.256] (II) NVIDIA(0): Frequency information for CRT-0:
[ 2031.256] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
[ 2031.256] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
[ 2031.256] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
[ 2031.256] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
[ 2031.257] (II) NVIDIA(GPU-0):
[ 2031.257] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
[ 2031.257] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2031.257] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2031.257] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2031.257] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
[ 2031.257] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
[ 2031.258] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
[ 2031.258] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
[ 2031.258] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
[ 2031.258] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
[ 2031.258] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
[ 2031.258] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
[ 2031.258] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
[ 2031.258] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
[ 2031.258] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
[ 2031.258] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
[ 2031.258] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
[ 2031.258] (II) NVIDIA(GPU-0):
[ 2031.506] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 2031.506] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 2031.506] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 2031.506] (**) NVIDIA(0): all display devices.)
[ 2031.506] (II) NVIDIA(0): Frequency information for CRT-0:
[ 2031.506] (II) NVIDIA(0): HorizSync : 28.000-55.000 kHz
[ 2031.506] (II) NVIDIA(0): VertRefresh : 43.000-72.000 Hz
[ 2031.506] (II) NVIDIA(0): (HorizSync from Conservative Defaults)
[ 2031.506] (II) NVIDIA(0): (VertRefresh from Conservative Defaults)
[ 2031.509] (II) NVIDIA(GPU-0):
[ 2031.509] (II) NVIDIA(GPU-0): --- Modes in ModePool for CRT-0 ---
[ 2031.509] (II) NVIDIA(GPU-0): "nvidia-auto-select" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "1024x768" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "1024x768_60" : 1024 x 768 @ 60.0 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "800x600" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "800x600_72" : 800 x 600 @ 72.2 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "800x600_60" : 800 x 600 @ 60.3 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "800x600_56" : 800 x 600 @ 56.2 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "640x480" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "640x480_60" : 640 x 480 @ 59.9 Hz (from: X Server, VESA)
[ 2031.509] (II) NVIDIA(GPU-0): "512x384" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
[ 2031.509] (II) NVIDIA(GPU-0): "512x384d60" : 512 x 384 @ 60.0 Hz DoubleScan (from: X Server)
[ 2031.509] (II) NVIDIA(GPU-0): "400x300" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
[ 2031.509] (II) NVIDIA(GPU-0): "400x300d72" : 400 x 300 @ 72.2 Hz DoubleScan (from: X Server)
[ 2031.509] (II) NVIDIA(GPU-0): "320x240" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
[ 2031.509] (II) NVIDIA(GPU-0): "320x240d60" : 320 x 240 @ 60.1 Hz DoubleScan (from: X Server)
[ 2031.509] (II) NVIDIA(GPU-0): --- End of ModePool for CRT-0: ---
[ 2031.509] (II) NVIDIA(GPU-0):
[ 2046.582] (II) evdev: HP WMI hotkeys: Close
[ 2046.582] (II) UnloadModule: "evdev"
[ 2046.623] (II) evdev: SynPS/2 Synaptics TouchPad: Close
[ 2046.623] (II) UnloadModule: "evdev"
[ 2046.663] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2046.663] (II) UnloadModule: "evdev"
[ 2046.702] (II) evdev: HP Truevision HD: Close
[ 2046.702] (II) UnloadModule: "evdev"
[ 2046.741] (II) evdev: Power Button: Close
[ 2046.741] (II) UnloadModule: "evdev"
[ 2046.794] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 2046.795] (EE) Server terminated successfully (0). Closing log file.
xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
Section "Module"
Load "glx"
EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
# VendorName "Unknown"
# ModelName "Unknown"
# HorizSync 28.0 - 33.0
# VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:1:0:0"
# Option "UseEDID" "true"
Option "ConnectedMonitor" "DFP-0"
# Option "CustomEDID" "CRT-0:/etc/X11/1280x1024.bin"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSectiondmesg :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.5-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000009a3befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009a3bf000-0x000000009aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP ENVY dv7 Notebook PC/181D, BIOS F.12 09/03/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask F80000000 write-back
[ 0.000000] 7 base 25F600000 mask FFFE00000 uncachable
[ 0.000000] 8 base 25F800000 mask FFF800000 uncachable
[ 0.000000] 9 base 260000000 mask FE0000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
[ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
[ 0.000000] [mem 0x25c000000-0x25f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x25bffffff]
[ 0.000000] [mem 0x200000000-0x25bffffff] page 2M
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0x9a3befff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0x9a1fffff] page 2M
[ 0.000000] [mem 0x9a200000-0x9a3befff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
[ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x379b0000-0x37ccffff]
[ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000009affe210 0000A4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 000000009affb000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 000000009afe4000 0130E0 (v01 HPQOEM 181D 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 000000009afb8000 000040
[ 0.000000] ACPI: UEFI 000000009affd000 000236 (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 000000009affc000 0000A5 (v32 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 000000009affa000 000038 (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 000000009aff9000 00008C (v03 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 000000009aff8000 00003C (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: WDAT 000000009afe3000 000224 (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009afe1000 001068 (v01 HPQOEM 181D 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 000000009afdf000 000028 (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: ASPT 000000009afdd000 000034 (v07 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 000000009afdc000 000034 (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 000000009afda000 000044 (v01 HPQOEM 181D 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 000000009afd9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000009afd8000 000926 (v01 HPQOEM 181D 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afd7000 000A92 (v01 HPQOEM 181D 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000009afd3000 002E84 (v01 HPQOEM 181D 00001000 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
[ 0.000000] NODE_DATA [mem 0x25f5f3000-0x25f5f7fff]
[ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x25f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00090fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0x9a3befff]
[ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
[ 0.000000] node 0: [mem 0x100000000-0x25f5fffff]
[ 0.000000] On node 0 totalpages: 2070351
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9799 pages used for memmap
[ 0.000000] DMA32 zone: 627135 pages, LIFO batch:31
[ 0.000000] Normal zone: 22488 pages used for memmap
[ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9a3bf000-0x9aebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s86336 r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037979
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64c5186f-288d-4708-959e-38cca5d1b5c0 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8068224K/8281404K available (5270K kernel code, 836K rwdata, 1672K rodata, 1128K init, 1324K bss, 213180K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2394.589 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.72 BogoMIPS (lpj=7981963)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000023] Security Framework initialized
[ 0.000029] AppArmor: AppArmor disabled by boot time parameter
[ 0.000030] Yama: becoming mindful.
[ 0.000417] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001940] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002614] Mount-cache hash table entries: 256
[ 0.002739] Initializing cgroup subsys memory
[ 0.002743] Initializing cgroup subsys devices
[ 0.002744] Initializing cgroup subsys freezer
[ 0.002746] Initializing cgroup subsys net_cls
[ 0.002747] Initializing cgroup subsys blkio
[ 0.002763] CPU: Physical Processor ID: 0
[ 0.002764] CPU: Processor Core ID: 0
[ 0.002768] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003048] mce: CPU supports 9 MCE banks
[ 0.003058] CPU0: Thermal monitoring enabled (TM1)
[ 0.003064] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 2
[ 0.003142] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
[ 0.003906] ACPI: Core revision 20131115
[ 0.009053] ACPI: All ACPI Tables successfully acquired
[ 0.053822] ftrace: allocating 21057 entries in 83 pages
[ 0.061910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.094942] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.094948] TSC deadline timer enabled
[ 0.094955] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.094960] ... version: 3
[ 0.094960] ... bit width: 48
[ 0.094961] ... generic registers: 4
[ 0.094962] ... value mask: 0000ffffffffffff
[ 0.094962] ... max period: 0000ffffffffffff
[ 0.094963] ... fixed-purpose events: 3
[ 0.094964] ... event mask: 000000070000000f
[ 0.121742] x86: Booting SMP configuration:
[ 0.135256] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.121746] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.256907] x86: Booted up 1 node, 8 CPUs
[ 0.256909] smpboot: Total of 8 processors activated (38328.81 BogoMIPS)
[ 0.262487] devtmpfs: initialized
[ 0.264464] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.265037] RTC time: 21:55:49, date: 02/28/14
[ 0.265063] NET: Registered protocol family 16
[ 0.265128] cpuidle: using governor ladder
[ 0.265129] cpuidle: using governor menu
[ 0.265147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.265148] ACPI: bus type PCI registered
[ 0.265150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.265197] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.265199] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.282064] PCI: Using configuration type 1 for base access
[ 0.282527] bio: create slab <bio-0> at 0
[ 0.282615] ACPI: Added _OSI(Module Device)
[ 0.282616] ACPI: Added _OSI(Processor Device)
[ 0.282617] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.282618] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.285086] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.312765] ACPI Error: No handler for Region [RAM_] (ffff880253874090) [EmbeddedControl] (20131115/evregion-162)
[ 0.312767] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
[ 0.312770] ACPI Error: Method parse/execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/psparse-536)
[ 0.312774] ACPI Error: Method execution failed [\_SB_.ACCL._STA] (Node ffff88025387e190), AE_NOT_EXIST (20131115/uteval-103)
[ 0.313004] ACPI: SSDT 000000009ae3a018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.313310] ACPI: Dynamic OEM Table Load:
[ 0.313311] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20111123)
[ 0.325950] ACPI: SSDT 000000009aeada98 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.326272] ACPI: Dynamic OEM Table Load:
[ 0.326273] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20111123)
[ 0.339208] ACPI: SSDT 000000009ababd98 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 0.339508] ACPI: Dynamic OEM Table Load:
[ 0.339509] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20111123)
[ 1.238575] ACPI: Interpreter enabled
[ 1.238580] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 1.238584] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 1.238594] ACPI: (supports S0 S3 S4 S5)
[ 1.238595] ACPI: Using IOAPIC for interrupt routing
[ 1.238612] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.238799] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 1.260983] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
[ 1.321167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.321171] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.321214] \_SB_.PCI0:_OSC invalid UUID
[ 1.321215] _OSC request data:1 1f 0
[ 1.321218] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 1.321676] PCI host bridge to bus 0000:00
[ 1.321678] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 1.321679] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.321680] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.321682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.321683] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 1.321688] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 1.321749] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 1.321772] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.321801] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 1.321826] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 1.321834] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
[ 1.321839] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.321842] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
[ 1.321916] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 1.321936] pci 0000:00:14.0: reg 0x10: [mem 0xd4600000-0xd460ffff 64bit]
[ 1.322002] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.322033] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 1.322061] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 1.322083] pci 0000:00:16.0: reg 0x10: [mem 0xd4614000-0xd461400f 64bit]
[ 1.322154] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.322218] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 1.322238] pci 0000:00:1a.0: reg 0x10: [mem 0xd4619000-0xd46193ff]
[ 1.322321] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.322363] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.322390] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 1.322404] pci 0000:00:1b.0: reg 0x10: [mem 0xd4610000-0xd4613fff 64bit]
[ 1.322466] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.322498] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.322527] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 1.322652] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.322697] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.322726] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 1.322855] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.322900] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 1.322929] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 1.323056] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.323100] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 1.323125] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
[ 1.323197] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.323232] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 1.323263] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 1.323282] pci 0000:00:1d.0: reg 0x10: [mem 0xd4618000-0xd46183ff]
[ 1.323366] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.323407] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.323434] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 1.323584] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 1.323601] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
[ 1.323608] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
[ 1.323615] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
[ 1.323623] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
[ 1.323630] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
[ 1.323637] pci 0000:00:1f.2: reg 0x24: [mem 0xd4617000-0xd46177ff]
[ 1.323678] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.323727] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 1.323741] pci 0000:00:1f.3: reg 0x10: [mem 0xd4615000-0xd46150ff 64bit]
[ 1.323760] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
[ 1.323853] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
[ 1.323862] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 1.323869] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.323875] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 1.323880] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
[ 1.323884] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 1.323917] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 1.330552] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 1.330557] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.330562] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
[ 1.330568] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 1.330681] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 1.330867] pci 0000:08:00.0: [10ec:5229] type 00 class 0xff0000
[ 1.330931] pci 0000:08:00.0: reg 0x10: [mem 0xd1000000-0xd1000fff]
[ 1.331423] pci 0000:08:00.0: supports D1 D2
[ 1.331424] pci 0000:08:00.0: PME# supported from D1 D2 D3hot
[ 1.331502] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 1.337279] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
[ 1.337286] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 1.337294] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
[ 1.337304] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 1.337465] pci 0000:0a:00.0: [8086:0887] type 00 class 0x028000
[ 1.337511] pci 0000:0a:00.0: reg 0x10: [mem 0xd4500000-0xd4501fff 64bit]
[ 1.337733] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
[ 1.337776] pci 0000:0a:00.0: System wakeup disabled by ACPI
[ 1.343946] pci 0000:00:1c.3: PCI bridge to [bus 0a]
[ 1.343959] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
[ 1.344076] pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
[ 1.344094] pci 0000:0b:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 1.344127] pci 0000:0b:00.0: reg 0x18: [mem 0xd4404000-0xd4404fff 64bit pref]
[ 1.344147] pci 0000:0b:00.0: reg 0x20: [mem 0xd4400000-0xd4403fff 64bit pref]
[ 1.344234] pci 0000:0b:00.0: supports D1 D2
[ 1.344236] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.373952] pci 0000:0b:00.0: System wakeup disabled by ACPI
[ 1.380639] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[ 1.380647] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 1.380654] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
[ 1.381137] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.381174] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.381209] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.381244] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.381278] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.381313] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.381348] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.381384] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.381615] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 1.381620] ACPI: \_SB_.PCI0: notify handler is installed
[ 1.381661] Found 1 acpi root devices
[ 1.381686] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.381736] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.381739] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.381740] vgaarb: loaded
[ 1.381741] vgaarb: bridge control possible 0000:01:00.0
[ 1.381741] vgaarb: no bridge control possible 0000:00:02.0
[ 1.381759] PCI: Using ACPI for IRQ routing
[ 1.387711] PCI: pci_cache_line_size set to 64 bytes
[ 1.387850] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
[ 1.387851] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 1.387852] e820: reserve RAM buffer [mem 0x9a3bf000-0x9bffffff]
[ 1.387853] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 1.387854] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[ 1.387910] NetLabel: Initializing
[ 1.387911] NetLabel: domain hash size = 128
[ 1.387912] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.387923] NetLabel: unlabeled traffic allowed by default
[ 1.387936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.387940] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.389961] Switched to clocksource hpet
[ 1.392856] pnp: PnP ACPI init
[ 1.392865] ACPI: bus type PNP registered
[ 1.392884] pnp 00:00: [dma 4]
[ 1.392898] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.392912] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.392979] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.392999] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.393026] system 00:04: [io 0x1100-0x110f] has been reserved
[ 1.393028] system 00:04: [io 0xffff] has been reserved
[ 1.393029] system 00:04: [io 0xffff] has been reserved
[ 1.393031] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 1.393032] system 00:04: [io 0x0458-0x047f] has been reserved
[ 1.393033] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.393035] system 00:04: [io 0x1200-0x1207] has been reserved
[ 1.393036] system 00:04: [mem 0xfe800000-0xfe8001ff] has been reserved
[ 1.393038] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.393055] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.393085] system 00:06: [io 0x0454-0x0457] has been reserved
[ 1.393087] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.393126] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 1.393148] pnp 00:08: Plug and Play ACPI device, IDs SYN1e5e SYN1e00 SYN0002 PNP0f13 (active)
[ 1.393228] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.393230] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.393231] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.393233] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.393234] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.393235] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.393237] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.393238] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.393239] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.393241] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 1.393242] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.393419] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[ 1.393420] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[ 1.393422] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.393458] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 1.393478] pnp: PnP ACPI: found 12 devices
[ 1.393479] ACPI: bus type PNP unregistered
[ 1.399368] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 1.399417] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[ 1.399419] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 1.399420] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.399422] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd3ffffff]
[ 1.399424] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 1.399427] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 1.399444] pci 0000:00:1c.1: PCI bridge to [bus 08-09]
[ 1.399447] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 1.399452] pci 0000:00:1c.1: bridge window [mem 0xd1000000-0xd1ffffff]
[ 1.399456] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 1.399465] pci 0000:00:1c.3: PCI bridge to [bus 0a]
[ 1.399471] pci 0000:00:1c.3: bridge window [mem 0xd4500000-0xd45fffff]
[ 1.399482] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[ 1.399485] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 1.399489] pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff]
[ 1.399497] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.399499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.399500] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.399501] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 1.399502] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 1.399503] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd3ffffff]
[ 1.399505] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[ 1.399506] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 1.399507] pci_bus 0000:08: resource 1 [mem 0xd1000000-0xd1ffffff]
[ 1.399508] pci_bus 0000:08: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 1.399510] pci_bus 0000:0a: resource 1 [mem 0xd4500000-0xd45fffff]
[ 1.399511] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[ 1.399512] pci_bus 0000:0b: resource 1 [mem 0xd4400000-0xd44fffff]
[ 1.399530] NET: Registered protocol family 2
[ 1.399642] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.399750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.399849] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.399860] TCP: reno registered
[ 1.399870] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.399890] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.399937] NET: Registered protocol family 1
[ 1.399946] pci 0000:00:02.0: Boot video device
[ 1.780500] PCI: CLS 64 bytes, default 64
[ 1.780530] Unpacking initramfs...
[ 1.820767] Freeing initrd memory: 3200K (ffff8800379b0000 - ffff880037cd0000)
[ 1.820771] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.820773] software IO TLB [mem 0x963bf000-0x9a3bf000] (64MB) mapped at [ffff8800963bf000-ffff88009a3befff]
[ 1.820794] Simple Boot Flag at 0x44 set to 0x1
[ 1.820989] Scanning for low memory corruption every 60 seconds
[ 1.821175] audit: initializing netlink socket (disabled)
[ 1.821183] type=2000 audit(1393624549.773:1): initialized
[ 1.830154] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.831019] zbud: loaded
[ 1.831130] VFS: Disk quotas dquot_6.5.2
[ 1.831155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.831254] msgmni has been set to 15764
[ 1.831287] Key type big_key registered
[ 1.831483] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.831523] io scheduler noop registered
[ 1.831524] io scheduler deadline registered
[ 1.831539] io scheduler cfq registered (default)
[ 1.831652] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.832086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.832096] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.832122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 1.832123] vesafb: scrolling: redraw
[ 1.832124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.832682] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 8128k, total 8128k
[ 1.946268] Console: switching to colour frame buffer device 240x67
[ 2.059378] fb0: VESA VGA frame buffer device
[ 2.059386] intel_idle: MWAIT substates: 0x21120
[ 2.059387] intel_idle: v0.4 model 0x3A
[ 2.059387] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.059528] GHES: HEST is not enabled!
[ 2.059562] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.059853] Linux agpgart interface v0.103
[ 2.059899] rtc_cmos 00:05: RTC can wake from S4
[ 2.060005] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.060033] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.060039] Intel P-state driver initializing.
[ 2.060046] Intel pstate controlling: cpu 0
[ 2.060056] Intel pstate controlling: cpu 1
[ 2.060066] Intel pstate controlling: cpu 2
[ 2.060075] Intel pstate controlling: cpu 3
[ 2.060081] Intel pstate controlling: cpu 4
[ 2.060087] Intel pstate controlling: cpu 5
[ 2.060094] Intel pstate controlling: cpu 6
[ 2.060101] Intel pstate controlling: cpu 7
[ 2.060170] drop_monitor: Initializing network drop monitor service
[ 2.060205] TCP: cubic registered
[ 2.060258] NET: Registered protocol family 10
[ 2.060356] NET: Registered protocol family 17
[ 2.060361] Key type dns_resolver registered
[ 2.060562] registered taskstats version 1
[ 2.061180] Magic number: 2:200:956
[ 2.061210] memory memory9: hash matches
[ 2.061260] rtc_cmos 00:05: setting system clock to 2014-02-28 21:55:50 UTC (1393624550)
[ 2.061289] PM: Hibernation image not present or could not be loaded.
[ 2.061821] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
[ 2.061822] Write protecting the kernel read-only data: 8192k
[ 2.063314] Freeing unused kernel memory: 864K (ffff880001528000 - ffff880001600000)
[ 2.064187] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
[ 2.070995] systemd-udevd[76]: starting version 208
[ 2.081683] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.086896] rtsx_pci 0000:08:00.0: irq 41 for MSI/MSI-X
[ 2.086940] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
[ 2.087062] ACPI: bus type USB registered
[ 2.087089] usbcore: registered new interface driver usbfs
[ 2.087162] usbcore: registered new interface driver hub
[ 2.087210] usbcore: registered new device driver usb
[ 2.087615] SCSI subsystem initialized
[ 2.087789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.087987] ehci-pci: EHCI PCI platform driver
[ 2.088114] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.088121] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.088137] ehci-pci 0000:00:1a.0: debug port 2
[ 2.088526] libata version 3.00 loaded.
[ 2.092034] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.092051] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4619000
[ 2.103911] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.104041] hub 1-0:1.0: USB hub found
[ 2.104046] hub 1-0:1.0: 2 ports detected
[ 2.104210] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.104214] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.104225] ehci-pci 0000:00:1d.0: debug port 2
[ 2.107112] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.107123] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.108127] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.108140] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4618000
[ 2.117274] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.117508] hub 2-0:1.0: USB hub found
[ 2.117514] hub 2-0:1.0: 2 ports detected
[ 2.117750] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.117756] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.117854] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.117873] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 2.118100] hub 3-0:1.0: USB hub found
[ 2.118108] hub 3-0:1.0: 4 ports detected
[ 2.118349] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.118351] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 2.118452] hub 4-0:1.0: USB hub found
[ 2.118462] hub 4-0:1.0: 4 ports detected
[ 2.135939] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.150760] ahci 0000:00:1f.2: version 3.0
[ 2.150968] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 2.164071] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl RAID mode
[ 2.164079] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 2.171405] scsi0 : ahci
[ 2.171666] scsi1 : ahci
[ 2.171894] scsi2 : ahci
[ 2.172116] scsi3 : ahci
[ 2.172313] scsi4 : ahci
[ 2.172447] scsi5 : ahci
[ 2.172504] ata1: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617100 irq 43
[ 2.172514] ata2: DUMMY
[ 2.172516] ata3: DUMMY
[ 2.172517] ata4: DUMMY
[ 2.172519] ata5: SATA max UDMA/133 abar m2048@0xd4617000 port 0xd4617300 irq 43
[ 2.172520] ata6: DUMMY
[ 2.410959] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.491002] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.491072] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.502872] ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
[ 2.502878] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.506430] ata5.00: ATAPI: hp DVD-RAM UJ8D1, H.01, max UDMA/100
[ 2.512780] ata1.00: configured for UDMA/133
[ 2.513113] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
[ 2.524950] ata5.00: configured for UDMA/100
[ 2.531477] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8D1 H.01 PQ: 0 ANSI: 5
[ 2.534925] hub 1-1:1.0: USB hub found
[ 2.534975] hub 1-1:1.0: 6 ports detected
[ 2.536606] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 2.536677] sd 0:0:0:0: [sda] Write Protect is off
[ 2.536680] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.536701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.537540] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
[ 2.538190] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.542465] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.542469] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.542686] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.608731] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.651327] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.651588] systemd[1]: No hostname configured.
[ 2.651596] systemd[1]: Set hostname to <localhost>.
[ 2.653530] random: systemd urandom read with 42 bits of entropy available
[ 2.657173] systemd-fstab-generator[151]: Checking was requested for "nas:/mnt/HD/HD_a2/STORE01", but it is not a device.
[ 2.687501] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 2.687558] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.687572] systemd[1]: Starting Login Prompts.
[ 2.687585] systemd[1]: Reached target Login Prompts.
[ 2.687595] systemd[1]: Starting Remote File Systems.
[ 2.687605] systemd[1]: Reached target Remote File Systems.
[ 2.687615] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 2.687642] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.687652] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 2.687669] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.687679] systemd[1]: Starting LVM2 metadata daemon socket.
[ 2.687712] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.687722] systemd[1]: Starting Delayed Shutdown Socket.
[ 2.687759] systemd[1]: Listening on Delayed Shutdown Socket.
[ 2.687772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 2.687812] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 2.687822] systemd[1]: Starting Paths.
[ 2.687832] systemd[1]: Reached target Paths.
[ 2.687842] systemd[1]: Starting Journal Socket.
[ 2.687878] systemd[1]: Listening on Journal Socket.
[ 2.687895] systemd[1]: Mounting Debug File System...
[ 2.688266] systemd[1]: Starting Journal Service...
[ 2.688521] systemd[1]: Started Journal Service.
[ 2.694471] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[ 2.702863] systemd-journald[157]: Vacuuming done, freed 0 bytes
[ 2.708483] FS-Cache: Loaded
[ 2.710845] usb 3-3: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.713390] RPC: Registered named UNIX socket transport module.
[ 2.713392] RPC: Registered udp transport module.
[ 2.713393] RPC: Registered tcp transport module.
[ 2.713394] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.718880] FS-Cache: Netfs 'nfs' registered for caching
[ 2.728296] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 2.741906] systemd-udevd[202]: starting version 208
[ 2.779466] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 2.780942] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 2.780948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.780952] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 2.780955] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
[ 2.780958] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
[ 2.780961] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.780963] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 2.780966] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
[ 2.780969] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 3 (20131115/utaddress-251)
[ 2.780971] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.780973] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.782830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.785766] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 2.791210] ACPI: Lid Switch [LID0]
[ 2.791504] [drm] Initialized drm 1.1.0 20060810
[ 2.791605] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.791609] ACPI: Power Button [PWRF]
[ 2.792665] wmi: Mapper loaded
[ 2.792681] hp_accel: laptop model unknown, using default axes configuration
[ 2.797256] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 2.802959] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.802966] r8169 0000:0b:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.803223] r8169 0000:0b:00.0: irq 46 for MSI/MSI-X
[ 2.803494] r8169 0000:0b:00.0 eth0: RTL8168evl/8111evl at 0xffffc90011eee000, a0:b3:cc:4b:1a:7e, XID 0c900800 IRQ 46
[ 2.803496] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.811332] cfg80211: Calling CRDA to update world regulatory domain
[ 2.815328] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 2.816642] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 2.816644] Copyright(c) 2003-2013 Intel Corporation
[ 2.816736] iwlwifi 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.816860] iwlwifi 0000:0a:00.0: irq 47 for MSI/MSI-X
[ 2.817888] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.818258] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 2.818636] platform microcode: Direct firmware load failed with error -2
[ 2.818639] platform microcode: Falling back to user helper
[ 2.821802] iwlwifi 0000:0a:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 2.824537] tsc: Refined TSC clocksource calibration: 2394.561 MHz
[ 2.826546] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.828014] usbcore: registered new interface driver usbhid
[ 2.828016] usbhid: USB HID core driver
[ 2.832266] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.832334] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.832373] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 2.832658] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 2.832662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.834846] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 2.834848] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 2.834850] iwlwifi 0000:0a:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 2.834851] iwlwifi 0000:0a:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 2.834955] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
[ 2.835666] usbcore: registered new interface driver snd-usb-audio
[ 2.854044] iTCO_vendor_support: vendor-support=0
[ 2.854466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 2.854514] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.854638] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.856761] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.860498] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[ 2.860514] platform microcode: Direct firmware load failed with error -2
[ 2.860516] platform microcode: Falling back to user helper
[ 2.863566] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.3/input/input10
[ 2.863734] hid-generic 0003:08BB:2902.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-3/input3
[ 2.867484] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[ 2.867498] platform microcode: Direct firmware load failed with error -2
[ 2.867500] platform microcode: Falling back to user helper
[ 2.870088] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[ 2.870100] platform microcode: Direct firmware load failed with error -2
[ 2.870102] platform microcode: Falling back to user helper
[ 2.870542] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
[ 2.870561] platform microcode: Direct firmware load failed with error -2
[ 2.870563] platform microcode: Falling back to user helper
[ 2.871275] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
[ 2.871285] platform microcode: Direct firmware load failed with error -2
[ 2.871288] platform microcode: Falling back to user helper
[ 2.871938] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
[ 2.871949] platform microcode: Direct firmware load failed with error -2
[ 2.871952] platform microcode: Falling back to user helper
[ 2.872242] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
[ 2.872254] platform microcode: Direct firmware load failed with error -2
[ 2.872257] platform microcode: Falling back to user helper
[ 2.872575] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 2.878423] systemd-udevd[206]: renamed network interface eth0 to eno1
[ 2.881987] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.890802] systemd-journald[157]: Received request to flush runtime journal from PID 1
[ 2.901323] systemd-udevd[217]: renamed network interface wlan0 to wlo1
[ 2.908030] ACPI: AC Adapter [ADP1] (on-line)
[ 2.941825] hub 2-1:1.0: USB hub found
[ 2.941930] hub 2-1:1.0: 8 ports detected
[ 3.021509] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 3.061674] intel_rapl: domain uncore energy ctr 8617:8617 not working, skip
[ 3.074806] lis3lv02d: 8 bits 3DC sensor found
[ 3.135241] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
[ 3.142912] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
[ 3.171642] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 3.233041] nvidia: module license 'NVIDIA' taints kernel.
[ 3.233045] Disabling lock debugging due to kernel taint
[ 3.238226] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[ 3.238279] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 3.238457] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 3.238462] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
[ 3.356112] media: Linux media interface: v0.10
[ 3.360422] Linux video capture interface: v2.00
[ 3.365597] uvcvideo: Found UVC 1.00 device HP Truevision HD (05c8:033a)
[ 3.377291] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
[ 3.377488] usbcore: registered new interface driver uvcvideo
[ 3.377494] USB Video Class driver (1.1.1)
[ 3.393157] iwlwifi 0000:0a:00.0: L1 Enabled; Disabling L0S
[ 3.400907] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
[ 3.425257] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[ 3.458983] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 3.473371] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 3.521478] Bluetooth: Core ver 2.17
[ 3.521492] NET: Registered protocol family 31
[ 3.521493] Bluetooth: HCI device and connection manager initialized
[ 3.521499] Bluetooth: HCI socket layer initialized
[ 3.521501] Bluetooth: L2CAP socket layer initialized
[ 3.521505] Bluetooth: SCO socket layer initialized
[ 3.523209] usbcore: registered new interface driver btusb
[ 3.597251] r8169 0000:0b:00.0 eno1: link down
[ 3.597286] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 3.825665] Switched to clocksource tsc
[ 4.034513] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2055, fw id: 1107424
[ 4.062727] nvidia 0000:01:00.0: irq 48 for MSI/MSI-X
[ 4.071722] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071771] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071795] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071832] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071854] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071876] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071922] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.071944] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 4.104186] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 4.107557] mousedev: PS/2 mouse device common for all mice
[ 4.326086] thermal LNXTHERM:00: registered as thermal_zone1
[ 4.326092] ACPI: Thermal Zone [TZS0] (69 C)
[ 4.606281] [Firmware Bug]: No valid trip found
[ 5.280111] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
[ 5.283560] random: nonblocking pool is initialized
[ 5.694087] ACPI: Battery Slot [BAT0] (battery present)
[ 7.035020] thermal LNXTHERM:02: registered as thermal_zone2
[ 7.035026] ACPI: Thermal Zone [TZS2] (57 C)
[ 8.889924] thermal LNXTHERM:03: registered as thermal_zone3
[ 8.889929] ACPI: Thermal Zone [TZS3] (30 C)
[ 9.408442] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 10.251376] type=1006 audit(1393624558.679:2): pid=348 uid=0 old auid=4294967295 new auid=120 old ses=4294967295 new ses=1 res=1
[ 11.338226] traps: gnome-shell[416] trap int3 ip:7f1024ce4289 sp:7fffc13c81f0 error:0
[ 33.022441] type=1006 audit(1393624581.429:3): pid=439 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=2 res=1
[ 33.028194] type=1006 audit(1393624581.436:4): pid=440 uid=0 old auid=4294967295 new auid=1001 old ses=4294967295 new ses=3 res=1
lsmod
Module Size Used by
joydev 9631 0
mousedev 10247 0
btusb 19648 0
bluetooth 326343 2 btusb
uvcvideo 72804 0
videobuf2_vmalloc 3304 1 uvcvideo
videobuf2_memops 2335 1 videobuf2_vmalloc
videobuf2_core 28243 1 uvcvideo
videodev 111840 2 uvcvideo,videobuf2_core
media 11719 2 uvcvideo,videodev
nvidia 10621191 29
intel_rapl 11776 0
x86_pkg_temp_thermal 6991 0
intel_powerclamp 8802 0
coretemp 6358 0
kvm_intel 131532 0
kvm 396221 1 kvm_intel
crct10dif_pclmul 4682 0
crct10dif_common 1372 1 crct10dif_pclmul
crc32_pclmul 2923 0
crc32c_intel 14185 0
ghash_clmulni_intel 4405 0
aesni_intel 45548 0
aes_x86_64 7399 1 aesni_intel
lrw 3565 1 aesni_intel
gf128mul 5858 1 lrw
glue_helper 4417 1 aesni_intel
ablk_helper 2004 1 aesni_intel
cryptd 8409 3 ghash_clmulni_intel,aesni_intel,ablk_helper
hid_generic 1153 0
hp_wmi 7595 0
sparse_keymap 3146 1 hp_wmi
arc4 2000 2
iTCO_wdt 5407 0
iTCO_vendor_support 1929 1 iTCO_wdt
mxm_wmi 1467 0
iwldvm 167738 0
mac80211 474681 1 iwldvm
snd_usb_audio 117811 0
usbhid 40545 0
snd_usbmidi_lib 19755 1 snd_usb_audio
hid 90902 2 hid_generic,usbhid
snd_rawmidi 18742 1 snd_usbmidi_lib
snd_seq_device 5180 1 snd_rawmidi
microcode 15216 0
evdev 11045 11
psmouse 88171 0
snd_hda_codec_hdmi 36379 1
iwlwifi 140193 1 iwldvm
serio_raw 5009 0
snd_hda_codec_idt 43508 1
cfg80211 408199 3 iwlwifi,mac80211,iwldvm
i2c_i801 11269 0
rtsx_pci_ms 7258 0
r8169 58423 0
memstick 7504 1 rtsx_pci_ms
rfkill 15651 4 cfg80211,hp_wmi,bluetooth
mii 4027 1 r8169
thermal 8556 0
snd_hda_intel 37352 0
snd_hda_codec 150017 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
intel_gtt 12664 0
drm_kms_helper 35710 0
snd_hwdep 6332 2 snd_usb_audio,snd_hda_codec
drm 239102 3 drm_kms_helper,nvidia
battery 7565 0
snd_pcm 77822 4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
ac 3334 0
snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
snd_timer 18718 1 snd_pcm
hp_accel 16520 0
i2c_algo_bit 5391 0
mei_me 9552 0
i2c_core 24760 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
lis3lv02d 11283 1 hp_accel
input_polldev 2818 1 lis3lv02d
snd 59029 11 snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
shpchp 25425 0
mei 62867 1 mei_me
wmi 8251 2 hp_wmi,mxm_wmi
video 11425 0
soundcore 5418 1 snd
lpc_ich 13368 0
processor 24620 0
button 4605 0
nfs 191568 0
lockd 76942 1 nfs
sunrpc 233786 2 nfs,lockd
fscache 47797 1 nfs
ext4 473259 2
crc16 1359 2 ext4,bluetooth
mbcache 6074 1 ext4
jbd2 80912 1 ext4
sr_mod 14930 0
cdrom 34880 1 sr_mod
sd_mod 31361 3
atkbd 16806 0
libps2 4187 2 atkbd,psmouse
rtsx_pci_sdmmc 13911 0
mmc_core 95465 1 rtsx_pci_sdmmc
ahci 23048 2
libahci 21698 1 ahci
libata 172104 2 ahci,libahci
ehci_pci 3928 0
xhci_hcd 144553 0
ehci_hcd 64171 1 ehci_pci
scsi_mod 132250 3 libata,sd_mod,sr_mod
rtsx_pci 32241 2 rtsx_pci_ms,rtsx_pci_sdmmc
usbcore 180208 8 btusb,snd_usb_audio,uvcvideo,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
usb_common 1648 1 usbcore
i8042 13366 1 libps2
serio 10721 6 serio_raw,atkbd,i8042,psmouse -
Script that worked in CS does not work in CS4 - multiple open page, print , pdf export and close
I had a script that worked great for me in Indesign CS. But now does not work in CS4. Anyone knows what needs to be done to make it work again ?
When I drop folder with indesign files on top of this script:
1. opens first page
2. turns specific layer on
3. prints using preset
4. exports using preset
5. close without saving
6. next page
Anyone who can give me solution or idea how this should work is greatly appreciated.
on open sourceFolders
repeat with sourceFolder in sourceFolders
tell application "Finder"
try
-- If you would like to include subfolders, you say - every file of entire contents of folder…
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias list
on error -- work around bug if there is only one file
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias as list
end try
end tell
if idFiles is not {} then
tell application "Adobe InDesign CS4"
set user interaction level to never interact
repeat with i from 1 to count of idFiles
open item i of idFiles
tell document 1
try
set visible of layer "ImagesTag_Layer" to true
end try
set myPreset to "letter size" -- name of print style to use
with timeout of 700 seconds
print using myPreset without print dialog
end timeout
set myPreset1 to "pdf preset name" -- name of pdf export style to use
set myName to the name -- name includes .indd should remove at some point
with timeout of 700 seconds
export format PDF type to "users:temp:Desktop:pdf:" & myName & ".pdf" using myPreset1 without showing options -- set path here format ComputerName:Folder1:Folder2:......:FileName.pdf
end timeout
close without saving
end tell
end repeat
set user interaction level to interact with all
end tell
end if
return 10 -- try again in 10 seconds
end repeat
end open(Disclaimer: me not an AS guy!)
First thing I noticed is the interaction level is set off. If you comment out this line
set user interaction level to never interact
you might be able to pinpoint the exact error -- ID will display a standard "failed" dialog, hopefully showing the line that it fails on.
A quick question: the script assumes two presets in your InDesign: one for print ("letter size") and one for PDFs ("pdf preset name"):
set myPreset to "letter size" -- name of print style to use
set myPreset1 to "pdf preset name" -- name of pdf export style to use
Do these actually exist in your CS4, with the same (non)capitalization and spaces?
Maybe you are looking for
-
How to export all the projects at one time
I got about 20 projects and content about 7000 pics. I don't want to just export project each time, and I would like to just export all of them at one time, is it possible? I don't know where and how to change the name of the master files, and how to
-
Had a huge problem after upgrading to iOS 4
After upgrading my iPhone 3G to iOS 4 I got a message on my iTunes telling me that "There's a problem with your iPhone"... Then when I tried testing it out, it was very laggy the slide bar takes a couple of times to get my iPhone open up and the lett
-
Can a wireless mouse be used with iPad?
Can a wireless/bluetooth mouse be used with iPad?
-
Set new value as a default value while creating PD(Performance Dailog) Form
Hi, In Performance management, While clicking on the Create new PD Form Button, We are getting one Pop up window with the deafult selection screen. In that, We are getting Valid From: and Valid To value bydefault as a '01.01.2011' and '31.12.2011' .
-
How to check installation date
Hello, i am wondering how i could easily check the installation date of mac os x (in this case leopard) Is there a special function implemented to check this or are logs (searched there already, but the log rotation wasnt helpful here) and the creati