Aliases of members are not reflected at dimension
Hi guys
I was facing a problem using table interfaces to load information. When the member that has aliases are imported it does not reflect the
alias on source system.
Any help will be appreciated.
Are you sure the associations are correct in EPMA or maybe the format of your import tables are not correct.
Cheers
John
Similar Messages
-
Changes are not reflected in Script output
Hi All,
i am facing a problem in SAPscript.
I have made a Zscript by copying standard script F110_FR_CHEQUE. I have made the changes in the script as per requirement in development client and transported it to testing client to test (As i dont have any data in development client). But, surprisingly, when i run the program and check the output, the changes are not reflected in the script output.
First i thought that my script was not triggered thats whay i m not getting any change, but later i changed the dimension of one of the window, in which some hard coded text is written, the differece i found was that, window size is changed, but the text written in that window is still same (what was in standard script.) .
I am using standard texts for hard coding in script. Standard texts have been transported in testing client also.
please help me in this regard.Hi,
Could you plese Check NACE whether your script is confiugring or not.
If it is configured well then Check Standard Text is available or not in Test client by open it in SO10.
Check all the paragrah formats applied to Standard text are transferred to Test client which are in SE72.
IF it is available in SO10 then debug the print program for that windows any standard conditions are calling to print the text. -
2LIS_02_ITM deleted line items are not reflected in BW
Hi,
Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
ThanksYes this is a known behavior in case of deltas.
For Deleted line items Rocancel field will have an entry with R.
To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
Regards,
AL -
Updated (VORowImpl ) values are not reflected in inline POPUP table
Hi Expert,
Currently i am getting exception when i try to update my iterator binding,
Here is my use case,
I have view object displayed inside the inline popup as a table. When i modify one of the cell i am firing the value change listener and it is called the ViewObjectRowImpl class method. Inside the method i do some computation (i am executing some DB query to get back some value). After the query execution i am updating the other columns data based on the changes.
First i have PPR the table and check out the update values. Unfortunately the change values are not reflected.
Then i used the following code
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
itrBinding.executeQuery();
itrBinding.refresh(DCIteratorBinding.RANGESIZE_UNLIMITED);
Now i am getting the " JBO-25003: Object EmployeeMgmtAM of type ApplicationModule is not found."
May i know what went wrong? Am i missing anything. May i know how can i refresh the UI table based on the updated VORowImpl. Looking forward hints.
ThanksThanks Frank, Actually i am accessing the client method as follows,
DCIteratorBinding itrBinding = findIteratorBinding("EmployeeVO1Iterator");
if (itrBinding != null) {
EmployeeVORowImpl employeeVO = (EmployeeVORowImpl)itrBinding.getCurrentRow();
empoyeeVO.methodName();
May i know what is the different between accessing the method as shown above and access via the MethodBinding?
How about access the attribute of the View object using the above approach? i.e empoyeeVO.getName() like ....
Also i have configure the ADF looger to finest level and found the primary reason to "Applicaiton module not found" was some entity validation. But this not always happened. Same test case works fine and fails sometimes. I am clueless. Could you please throw some light.
Thanks
Edited by: user1022639 on Feb 7, 2012 5:24 PM -
Changes are not reflecting in the discoverer workbook
Hi ,
I have a report created with user Disco(Disco.Report_name).Now I need to add a column to it and i have done that with other user Discodev but when I save it the changes are not reflected on Disco(Disco.Report_name) rather it is being saved with user Discodev(*Discodev.Report_name*) .
The User wants that the changes should be reflected on Disco.Report_name (I can't use the credentials of Disco to do this as it is also a user) .
Appreciate your help !!
Discoverer Version 4i
Thanks ,
VijayHi West,
Thanks for the reply.
I want to get clarified one thing, Is there any option where DISCO user can give Privileges to DISCODEV to make the changes,as the DISCO user is not a common user I have a problem in making the changes.
Thanks,
Vijay -
Changes are not Reflecting in WAD
Dear Gurus,
I got a problem in WAD. Changes are not Reflecting in My WAD. When i created NewQuery in WAD by just placing Chart & Saved it. After executing Chart is displaced.Again I updated the same query by placing table and saved it. After Executing Table is not displayed only previously saved Chart is displayed. Could any one Kindly solve my Problem.
Thanks,
SonyHi Sony,
SAP BI has HTTP Cache and the web templates are stored in the HTTP cache of the server. So, when you change a template and execute it again - the previous version which is stored in the HTTP cache is being retreived.
To correct this, go to TCODE SMICM in the menu bar >> Goto >> HTTP Server Cache >> Invalidate -> Global in system
Once this is done, ask basis to restart the java engine.
I hope this helps you.!
-Pradnya
Edited by: Pradnya Rane on Sep 29, 2009 8:05 AM -
I have repeatedly imported several psd images into LR 1.3, made changes in the develop mode, and saved metadata to file manually in addition to having the auto write metadata option on in LR and ACR. Any changes I have made in LR are not reflecting in Bridge previews or in ACR or Photoshop. I don't believe I should have to utilize the write to xmp options (even though I have been) since the files in question are psd and the metadata gets written directly into the file. If I delete the photo from LR, and even delete the LR catalog (new user trying to make it work with 1 photo at least before importing all images) and re-import the psd to LR it appears with the changes and can backlog in the history panel to it's original state upon import into LR. I would have to be in LR though to know that anything was altered as the other Adobe programs will not display the changes.
If anyone has any help - I would greatly appreciate it!
Thanks,
Ann
System=
160 GB hard drive
Intel core duo T7500
2 GB Ram
Windows Vista 32 bit
ACR 4.3
LR 1.3
Bridge 2.1.1.9
PS CS3 (updated last week)I don't think the problem lies in the name. LR is after all meant to function as a data base of images and be a companion program to PS - with PS doing the heavy editing lifting. I do understand that PS is a pixel editing file and LR is not. I like the idea of the non-destructive editing that LR has to offer and for a lot of image "developing" I prefer LR's interface to ACR.
In my humble opinion, I just think that the Photoshop family of products should all be able to read the same metadata. If I am starting in LR with a psd file (with layers) and I continue to process the image further in LR and save the metadata - therefore saving the changes - I want to be able to open that same file (not another copy) in ACR, PS, or Bridge and have those changes reflected. The only way to do that currently is to export the file and when you do that you lose the PS layers and the LR history panel or another way around it is you can have edit copies of the same file. If at a later date you wanted to go back and change something, you can't just pull out a layer in PS or undo a history state in LR and with the multiple copies of essentially the same image you end us with any editing history scattered amongst multiple files. I already keep 2-4 (original, psd, jpeg print, jpeg web) files for one image which I think is more than adequate. Which is why I find the current set up so frustrating. For now I have just settled for exporting jpegs so I can see the changes. -
Team members are not displaying in Team Calendar
For some employees.... Team members are not displaying in Team Calendar in Portal what would be the problem Could you please resolve this Its very urgent
Edited by: Kumar.saphr on Aug 18, 2011 9:38 AMHi Kumar,
This could be due to the following reasons:
1. Check whether the OADP settings are correct. It might be worth testing the evaluation path that it uses.
2. Check whether the users have appropriate authorisations (for IT2001) and structural auths (if implemented).
Hope it helps.
-Akshay -
LPA changes are not reflected fully in 2LIS_02_SCL
The changes done to scheduling agreement, schedule lines are not reflecting in 2LIS_02_SCL, and there by resulting errors in delta update in BI system.
For example
LPA RM SCL Quantity (2LIS_02_SCL)
ODS(A) 3001 15 800
ODS(C) 3001 X 15 300
3001 15 800
PSA 3001 X 15 400
3001 15 900
As we are using the Update type Addition,
From PSA, it is clear that the change is 500; this change got reflected in ODS properly.
But when I compare ODS data with EKET data,
LPA SCL ODS(Active) EKET
3001 15 800 900
As you can see wrong validation results between BI & R3
I am missing the below changes happened to SCL in the extractor
3001 X 15 300
3001 15 400
The missing above entry is resulting errors.
Does anybody know how the EKET line changes can be tracked?
How to check the V3 Update, we checked the program: RMBWV302
Does anybody have idea where to track this error.
Note: the above case is happening to only a for few documents
Regards,
NK.A
Message was edited by:
nandakumar aHi Renjith,
Thanks for the reply. Can you please let me know few more answers to the below points.
As the datasource 2LIS_02_SCL does not takes this event into account (only MA, MB, MC and MD), this field is not passed to BW (you can see the events per datasource in transaction LBWE)
You are referring to posting of the Material Ledger posting right ? Can you please give some more information about MA MB MC MD as I have verified in LBWE and could not find anything about it except that its picking that GLMNG value from MCEKET table.
Renjith, Please update your views on the below query. I am not able to get any answers from anyone on this query. I appreciate your reply.
In my opinion you would be able to fill it in the customer-exit of LIS (EXIT_SAPLEINS_001) or BW (EXIT_SAPLRSAP_001)
If I add a zfield to the SCL DS and then populate that field with the code in the include ZXRSAU01 , EXIT_SAPLRSAP_001 in that going to help.
Do I have to verify the events MA MB MC and MD while populating this zfield or I can just do a direct lookup on EKET
select single * from EKET
where EBELN = l_MC02M_0SCL-EBELN
and EBELP = l_MC02M_0SCL-EBELP
and ETENR = l_MC02M_0SCL-ETENR will do ?
So when ever the ds fields are getting populated in the org DS ...it will find this zfield in the same structure and will fill this field. Is that going to fix it ? I have also found couple of SAP Notes on the same issue and do you think implementing those notes will fix the problem without the zfield or code.
Could you please check out these notes 100690 and 431145. Please suggest.
Thanks,
Daniel -
SAP BI CKF,RKF descrptions are not reflecting in the universe
Dear Gurus,
I have couple of questions
1.I have created a BI quey with 2 calculated keyfigures and 2 Restricted keyfigures. When i am creating a universe on top of the BI query, Desrptions for Calculated and Restricted keyfigures are not reflecting in the universe, Rather the universe is showing UID(unique ID)'s of the CKF and RKF.
To get the descriptions into the universe, Do i need to do any settings?
2. In one of the documents I have read that we have to create one universe for one language if i want to see the report in Multiple languages. if it is so,
Do i need to create universe in each and every language or is there any option that i can create the universe in one language and replicate into the required languages?
Please help.
Thanks and Regards
Jagadeesh AmbatiHello Jagadeesh,
I recommend to post this query to the [Integration Kits - SAP|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the BusinessObjects Integration Kit for SAP.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk -
Changes are not reflecting while executing the SAP script from report
HI,
In SAP-script we are nmaking changes in form in client 130
it is showing the changes in 140 client but while excuting the report the same are not reflecting in the output.
Thanks in Advance
Naveen MHello.
Scripts are mandant depentant. So you must copy from 130 to 140 for changes take efect.
Do it in transaction SE71 in mandant 140, first screen, in the menu options.
And never forget to activate it in all mandants.
Best regards.
Valter Oliveira. -
Changes in Crystal reports are not reflecting after publishing
Dear SDN Mates,
We are facing problem with Crystal reports. After making the changes in the crystal reports, it is not reflecting in the portal after publishing. Still it is showing the older version of the report.
Can anyone please help me on this.
Thanks and Regards
Arun SHello Prathamesh,
After publishing the report, we require some changes in the report and doing some modifications in crystal report and again we are publishing this report. After publishing the report for second time, those changes are not reflecting in the BOE portal.
This is happening for all reports. Can you please suggest me on this.
Thanks and regards
Arun S -
SAP BI RKF,CKF Descrptions are not reflecting in the universe
Dear Gurus,
I have couple of questions
1.I have created a BI quey with 2 calculated keyfigures and 2 Restricted keyfigures. When i am creating a universe on top of the BI query, Desrptions for Calculated and Restricted keyfigures are not reflecting in the universe, Rather the universe is showing UID(unique ID)'s of the CKF and RKF.
To get the descriptions into the universe, Do i need to do any settings?
2. In one of the documents I have read that we have to create one universe for one language if i want to see the report in Multiple languages. if it is so,
Do i need to create universe in each and every language or is there any option that i can create the universe in one language and replicate into the required languages?
Please help.
Thanks and Regards
Jagadeesh AmbatiHi ingo,
do you see the desriptions in items like the RSA1 ? - I can able to see the descrptions of Calculated keyfigure and Restricted keyfigure in the query designer and as well as in Bex analyzer.
did you use the same language when building the universe connection ? - Yes I have created the connection and universe in English Language.
Thanks and Regards
Jagadeesh Ambati -
Fonts are not reflecting while running Java Applet Through Forms
Hello Oralce Gurus!!
I have a Java Applet which has few lines of text in different
fonts such as AgencyFB, Verdana Ref etc., When I am running this
applet from console, I am able to see the text in different
fonts. Where as If I run the applet through forms (as a Bean
(ViewerBean) ), the fonts are not reflected. The text appears in
a default font.
All the fonts are installed on WinNT, where the applet resides.
I will be greatful if anyone can suggest me a solution.
Thanks,
Raghutry out this
ImageIcon img1=new ImageIcon(this.getClass().getResource(imagename));
for exmaple
Imageicon img1=new ImageIcon(this.getClass().getResource("name1.jpg"));
dont 4get to include the image files in the jar file -
Images are not reflecting in Multi Level Menu
Hi,
i am facing some problem in the Multi Level Menu.
i have created a book in my portal application.
For the "Main Page Book" i am setting "Multi Level Menu"
For the Book with in the menu, i am setting "No Navigation"(to avoid the sub pages displaying when clicking the book)
for example the Book name is "Home".
i want to replace the Home with some images.
using "selected image" i have placed some .gif
when i have checked at run time that image is not reflected.
when i keep the menu as "Single level menu" images are coming. (but drop down is not coming)
the problem is when i put the menu as "multi level menu" the images are not reflected.
pls help me to solve this issue.
regards.Hi,
we've got the same issue in the project I'm working on. We told thos to BEA and they said that this is not coded. So 2 BEA's consultants are working on it for us. May be it will be included in the next version of WLP...
Tom
Maybe you are looking for
-
No value in the classification of material master data
Hi: When I am going to assign the value into the class of batch type 023,and I found there is no value for me to choose,how add the value of class in customziation?
-
ABAP runtime errors CALL_FUNCTION_WAIT_ERROR
Dear All, we got a lot of dump error in CALL_FUNCTION_WAIT_ERROR Error analysis An error occurred when executing a Remote Function Call. "connection closed" Status of connection.... "CODE=CM_DEALLOCATED_NORMAL CM_SEND_RECEIVED CM_COMPLETE_DATA_RECE
-
Why is the quality of movies and pictures exported to the external hard drive lowered?
Why is the quality of movies and pictures exported to the external hard drive lowered?
-
Does the new iwork still support services/linkback?
I updated to Mavericks and to the new iWork and it all appears to be there, but doesn't seem to work. Not sure if I'm doing something wrong or if it's not supported anymore. Thanks!
-
Hi all experts, I'm wanting to create a simple hangman game for the Nokia 3650 for a Thesis due in September. Can you tell me what emulator and/or development kit I need to download from Nokia or Java in order to get started. My first task is to writ