Alienware hard drive in Mac Pro Laptop?

Soon, I'm looking at purchasing a Macbook Pro & I'm interested in tweaking it in the few places that it can be tweaked: namely the hdd & memory. I'm looking at the purchase of Macbook Pro that runs for about $1800 base (I can get a corporate or student discount). I had a few questions about tweaking.
I've seen that there are after-market Alienware hard drives and they do not appear to be of any specific brand (I think they come from Seagate). Has anyone tried an Alienware hard drive in their Macbook Pro and would they be comparable to the Western Digital Scorpio Black? I have noticed that the Alienware hard drives in after market are cheaper than the Scorpio Black, but can't confirm their specs outside of the specs given on the Alienware configuration website, or even if they work in other laptops. The online chat for Dell stated they are generic drives that are not proprietary..and yet they don't sell them separate.
Also, are there any links to sites where people have tweaked their Macbook Pros
that make for good reading material?
Thank you.

Welcome!
You can order up to a 250G drive in a 15" MBP and a 300 in the 17". And they are covered by Apple's warranty. If you change out the drive yourself, it likely voids the warranty. Also the connectors are small and delicate to allow the use of a compact case. If one of these breaks, it can mean a new logic board.
Is there some reason that the AlienWare drive appeals other than cost? You can compare drive prices at this vendor that specializes in Mac stuff:
2.5" SATA drives
I like Western Digital drives but others are good, too,
Because of the lack of internal space and the tiny nature of the parts, most people don't tweak MBPs.

Similar Messages

  • How to Install New Internal Hard Drive on Mac Pro Laptop

    My wifes 15 in Mid 2010 lap top running 10.8.4 has run out of drive space so we bought a new 1tb drive to install. We aren't sure where to go from here. The current contents are back up on Time Machine, but we also bought a small hard drive enclosure to take out the current hard drive and put it in the small enclosure.
    So...do we install the new 1tb drive into the laptop and then try and start from the original hard drive that is now in an enclousure...then "Copy" or "Migrate" the material from the original hard drive to the new on? If so...how is that done?
    Or do we try and "Copy" or "Migrate" the hard drive materials backed up on Time Machine? If so...how do we do that?
    Thank you!

    After formatting the new hdd, while still outside the mac, make a clone of your internal disk with CarbonCopyCloner on the new (still external) disk: CCC will ask you to install the Recovery Partition also, do that, and then the clone.
    Then you eject the new drive, shutdown, and then you open the mac take the original disk out, and put the new one in.
    On the OWC and other sites you will find instructions how to do the switch. Be very careful with the connectors inside .

  • Can I format an IDE Hard Drive from Mac Pro?

    I use a mid - 2012 Mac Pro; run Mavericks OS X 10.9.2.
    1. Can an IDE hard drive (using an external drive) be formatted to 10.9.2, from my Mac Pro using Mavericks? (the IDE hard drive is new/unformatted).
    2. Once formatted to 10.9.2, can I reformat the IDE hard drive to Mac OS X Leopard 10.5.8, from my Mac Pro using Mavericks?
    3. If so, would should I do to accomplish Question # 2 above?

    The version of the OS that is running  is not relevant to formatting the drive. When you format a drive in any OS, you should select "Mac OS extended journaled." (That is, unless you plan to share the drive with a Windows computer.) Formatted this way, the drive can be used with any version of Mac OS.
    You do not have to reformat the drive each time you connect it with a different OS.

  • How to install hard drive into mac pro

    how to install hard drive into mac pro

    I recently bought a new 2TB internal sata drive for my Macpro.
    The installation was easy, but I'm not sure what to do next.
    For one, should I partition the drive?
    My purpose for buying the drive was to use it as my go to drive for Parallels. I used to run my music studio on Windows based machines, and my older project files require a windows OS to recover. I installed Parallels so I can have my studio running Mac and Windows programs which will enable me to access my old project files and take them into my newer Protools system.
    So now, I've installed my new hard drive, but I'm not sure if I should partition it....And!? I'm not sure how to designate that drive for my virtual pc on Parallels. I was able to allocate enough disk space to parallels in order to load my music software, but at this point, I'm not sure if I've just promised it disk space from my original partitioned drive (which only has about 350 GB left on it).
    I would love to be able to make one internal drive available for Parallels, and the other available for the rest of my OSX. When I use Parallels, I still would like to save some extra information on the 2TB drive as well from my dekstop running OSX.
    I hope this makes sense! Your help is much appreciated!

  • HT4818 Boot from laptop's Windows Hard Drive in Mac Pro via Boot Camp

    I have a work laptop that is on Windows 7.  It's a work hard drive so I don't want to mess with it (particularly as it's encrypted).  I basically want to use it on my Mac Pro rather than my piece of junk standard issue laptop when I'm working from home.
    What I would like to do is pull the drive out, put it in my Mac Pro and boot from it using Boot Camp.  Guidance I've seen so far talks about not being able to use an external drive but having to partition an internal drive.  However, if I've got everything on a separate drive (i.e. my laptop's drive), will this work?
    Thanks!

    Thanks for the quick (and no nonsense) response!

  • How to access hard drive on mac pro desktop from laptop?

    I sold my Mac monitor and wireless keyboard. Now I want to sell my Mac Pro Desktop, but I need to wipe the hard drive first. How can I turn it on and access the drive from my Mac laptop?

    It will show up as a drive, you can just access the drives on the desktop provided you turned on disk sharing. You can't access the "desktop".. If you had previously turned on screen sharing then you could use that via network connection.
      If you can find the file that has preferences and then edit it then you can change to startup in Target disk mode. I do not know the file or how to edit it.
    GSC818 wrote:
    If I can start it from the button, then can't I connect to my laptop via firewire or Ethernet and would it show up as an external drive? Then I could change the startup disk in the preferences panel on my laptop. Would that work?

  • External hard drives for mac pro, external hard drives for mac pro

    my laptop always says there is not enough space and I notice my hard drive it out of room, what would be a best external hard drive that will support the Mac Book Pro?

    huge storage, low cost, high quality, very small and portable.
    BEST FOR THE COST, Toshiba "tiny giant" 15mm thick  2TB drive (have several of them, lots of storage in tiny package)    $100
    http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48    /ref=sr_1_3?ie=UTF8&qid=1390020791&sr=8-3&keywords=toshiba+2tb
    best options for the price, and high quality HD:
    Quality 1TB drives are $50 per TB on 3.5" or  $65 per TB on 2.5"
    Perfect 1TB for $68
    http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
    Nice 500gig for $50. ultraslim perfect for use with a notebook
    http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s    r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
    *This one is the BEST portable  external HD available that money can buy:
    HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
    http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr    _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
    Most storage experts agree on the Hitachi 2.5"
    Hitachi is the winner in hard drive reliability survey:
    Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

  • Cant install mountain lion on a new hard drive 2011 mac pro 17"

    for some reason I bought the infamous 2011 mac pro, and the hard drive kept having IN/OUT problems and after it destroyed half day of work, I decided to get a new hard drive, *blue WD 500g" but i have tried EVERYTHING and i just cant install mountain lion on it.
    1.- i tried forcing the recovery mode so It would connect to the internet and download mountain lion but after 10 min or so i trows the -2002f error at me
    2.- I tried to use the old hard drive that i put on a external hard drive reader so I could get the recovery partition but i just keep restarting the installation no reason given
    3.- downloaded the mountain lion and tried to installing it on the system hard drive of the laptop trough a computer running snow leopard but dosn't let me.
    4.- tried the same thing on target mode without success
    5.- using the recovery partition I used disk utility to se of the partition was locked but it was not
    6.- created a different partition to see if it would install it  there didn't work.
    i just don't understand why
    any toughs?
    if you answer this you would be a personal hero of mine
    cheers

    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Use DiskMaker X to put your installer clone onto the USB flash drive.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
         sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
         /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
    Wait for the process to complete which will take quite some time.

  • Swap Hard Drives Between Mac Pro's

    I have a MacBook Pro "Core 2 Duo" 2.53 15" (Unibody - Late 2008) that has been upgraded from the standard 320 GB SATA hard drive, to a Seagate 750 GB SATA 16 MB cache 7200 rpm hard drive.
    I have recently upgraded to a MacBook Pro "Core 2 Duo" 2.66 15" (SD - Mid 2009) that has the standard 320 GB SATA hard drive.
    Both are running Mac OS X Snow Leopard 10.6.8.
    I will be selling my older (2.53GHz) Mac Pro but would like to keep my larger hard drive.
    Question
    Can I simply swap the hard drive out of my older (2.53GHz) Mac Pro and install it into the newer (2.66GHz) Mac Pro, without having to reinstall the Mac OS X software?
    I no longer have any of my OS X install disks.
    Will the 750 GB hard drive still perform the same in the newer Mac Pro, given that they are running the same OS?
    Thanks in advance!

    From what I understand the USB/PCIe interfaces are (somewhat) device specific. But it depends on the particular vendor in question.
    According to barefeats.com, regarding USB devices:
    "...Our only concern was that it {the CalDigit adapter} only worked with CalDigit USB 3.0 enclosures like the AV Drive. They since updated the driver to "unlock it." In fact, all the USB 3.0 results posted above for non-Cadigit enclosures were done with the CalDigit PCIe USB 3.0 host adapter...."
    So, for example, the Lacie PCIe adapters are "specific". Only works with their stuff. Originally the CalDigit PCIe adapter was the same: limited to use with their devices only. But they've altered that so that it is more generic. In fact, it was used to test the other USB 3.0 devices in the barefeats tests.
    So the CalDigit card, at least, is a more flexible choice.

  • Maximum Size of Hard Drive in Mac Pro (Early 2008)

    What is the Maximum size of Hard Drive that I can install in drive bay 3 or 4?
    Computer info below:
    Model Name: Mac Pro (Early 2008)
    Model Identifier: MacPro3,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 2.8 GHz
    Number Of Processors: 2
    Total Number Of Cores: 8
    L2 Cache (per processor): 12 MB
    Memory: 14 GB
    Bus Speed: 1.6 GHz
    Boot ROM Version: MP31.006C.B05
    SMC Version (system): 1.25f4
    Hardware UUID: FF121465-84A1-52F2-A94A-58A60A20F4AF

    WE don't know, all there are today are 2TB and those are fine. I think you could RAID 6 for 10TB and maybe then?
    Serious, there are none. Do you really expect to hit some ceiling?
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

  • New hard drive in Mac Pro showing 0 bytes after partitioning

    I bought a Western Digital Caviar 2TB internal hard drive for my Mac Pro (2 x 2.66 GHz Dual Core Intel Xeon (late 2006), 12GB RAM, Mac OS 10.6.8). It already has two 500GB internal drives in two of the four slots.
    I slotted the new WD hard drive in and started up the Mac, getting an alert saying there was an unrecognisable disk and did I want to initialise it? Yes, so it opened up Disk Utility.
    This showed my two 500GB drives plus the new WD drive at 2TB. To initialise it I erased the disk which failed with an error ("POSIX reports: The operation
    couldn't be completed. Input/output error").
    I next decided to use Partition instead, choosing just one partition of 2TB, Mac OS Extended (Journaled). After 7 minutes it said the process had been completed and the volume was mounted, though it didn't appear on my desktop, just in Disk Utility. I thought a restart would refresh and show it on the desktop.
    Once the Mac was up and running again there was nothing there at all - and now it wasn't even listed in Disk Utility. I shut down, took the hard drive out,
    looked at it, scratched my head, replaced it, and turned the Mac back on.
    Once again I got an alert telling me the disk was uninitialised and would I like to format it, so clicked OK and Disk Utility opened. This time the disk was
    there (WDC WD20EZRX-00DC0B0) but no volume. The info said the drive had a size of 0 Bytes and I could not erase or partition as all buttons were greyed out,
    with the Partition tab saying 'this disk is too small to contain partitions'.
    So what can I do now? According to macupgrades.co.uk this drive should work in my model of Mac (they recommend and sell it, though I purchased it from NORDPC via Amazon as it was a little cheaper).
    http://www.macupgrades.co.uk/store/product_info.php?products_id=532
    I tried, with the help of my more computer-literate brother, to erase the disk from the command line via the Terminal, getting a result of "Error: 6: POSIX
    reports: Device not configured". (Actually we first tried to reformat it, with an error of "does not appear to have a valid file system format").
    Does anyone with more knowledge of such things have any ideas or advice? It would be much appreciated.

    Unless the drive and sled are not inserted properly - unlikely - or that other drives don't work in that slot - watch out if true, unlikely but loose SATA cable - it IS a bad drive.
    If you don't have a PC, setup Windows VM and use WD Lifeguard which is excellent and tests for things like bad SATA cable communicating.
    You could also - I always use Partition tab btw - go in there and set it to exFAT and Windows Master Boot Record. All you want is a good drive. This one is not.
    GUID tests first and last 10,000 sectors or more to insure that the partition tables and hidden areas work (they are not it is failing). Use to be that a "backup volume information block" was treated as optional if any sectors failed, now it is not.

  • Going into my hard drive causes mac pro to lock up like fort knox

    Hi, I have been a mac user for just a hair over a year.(Apple will not help me with anything)
    All has been swell until now.
    If I go into my hard drive my computer locks right up. I can do
    nothing to move it along. The only option I have is to hold down the
    power button for six seconds, which kills me and the computer a little
    each time. I booted up the computer using the mac install disc and I
    used disk utility to "repair" the disk. It reported the disk was "OK".
    I thought swell, and went into documents on the hard disk and it
    locked my computer up again. I let it sit there for an hour and
    nothing moved. apple/option/esc does not do anything. I went into time machine and
    went to the documents there and it locked up the computer too. I went into finder and went to documents and it locked up the computer. I went into other areas of the hard drive and it locked up the computer. The funny thing is I can go on the internet, use programs, read email, and everything works fine. Can anyone guide me in
    the right direction in solving this problem I am facing?
    Specs:
    Model Name: Mac Pro
    Model Identifier: MacPro2,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 3 GHz
    Number Of Processors: 2
    Total Number Of Cores: 8
    L2 Cache (per processor): 8 MB
    Memory: 8 GB
    Bus Speed: 1.33 GHz
    Boot ROM Version: MP21.007F.B06
    SMC Version: 1.15f3
    troubled drive:
    ST3750640AS P:
    Capacity: 698.64 GB
    Model: ST3750640AS P
    Revision: 3.BTH
    Serial Number: 5QD1P*
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Bay Name: "Bay 1"
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Macintosh HD:
    Capacity: 698.32 GB
    Available: 328.75 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk0s2
    Mount Point: /
    second drive:
    SAMSUNG HD753LJ:
    Capacity: 698.64 GB
    Model: SAMSUNG HD753LJ
    Revision: 1AA01112
    Serial Number: S13UJ1CQ6***
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk1
    Bay Name: "Bay 2"
    Mac OS 9 Drivers: No
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    Boot OSX:
    Capacity: 128 MB
    Writable: Yes
    File System: HFS+
    BSD Name: disk1s3
    Mount Point:
    <Edited by Moderator>

    Sounds like itneeds some good basic maintenance and troubleshooting. Stop using this drive. Start trashing temp files, and off loading good files.
    Everytime you freeze and do a hard restart, the chance that the journal, directory, file system and data are compromised increases, in spite of the "OKAY" from Disk Utility's repair routines it is not reliable. And leads to false sense of security. Disk Utility only checks the basic directory, not the files themselves.
    It may be something like a damaged Finder plist/preference, or worse, but either you look for an easy fix, or just start cleaning up and moving files and system to a good drive and system.
    You may have bad blocks on your drive causing all this. Or not. TechTool can detect bad sectors, but not map them out. (Deluxe is part of AppleCare; or Pro, commercial version).
    Start using SuperDuper if you don't already, and Disk Warrior, premiere for disk repairs.
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    What you need to be doing is rebuild your system from the foundation up.
    You may need to check out Data Rescue II demo from Prosoft Engineering to recover files.
    I would begin by installing OS X on another drive, or restoring from TimeMachine. Create/name an "emergency" boot drive partition. Doesn't need to be that large. Keep it handy just for doing repairs and maintenance. Keep another as a clone of your working system and backup - in addition to TimeMachine.
    You may want to start by erasing the drive (not just the OS volume) with a 7-way write (not just zero all, it does NOT do a reliable safe job mapping out bad blocks) and restore from TimeMachine. Or work with a new drive.

  • Installing SATA (parallel?) hard drive in mac pro

    is there a way to install my old ATA (is this called parallel) hard drive into my mac pro? i know i can't put it in one of the SATA slots, but how about the second drive bay or something?

    While the screws fit into hard drive screw threads they're largely useless as the mounting holes for a 5.25" optical drive do not match that of a 3.5" hard drive. If you want to do any screwing in on the drive you will at a minimum require a 3.5" to 5.25" conversion bracket. Even then the mounting can be tricky do to the short cable and likely misalignment and the connector to that of the optical drive above it.
    While the installation of a drive is not difficult the mounting of it, especially if you want it nicely done, can very well be.

  • Installing new hard drive in Mac Pro - question about compatibility.

    I'm looking to install an extra internal hard drive in my 2009 Mac Pro, but I need to know if there are any compatibility issues with newer hard drives. I am looking at the Western Digital WD1002FAEX Caviar Black:
    http://www.amazon.co.uk/gp/product/B0036Q7MV0/ref=s9_simh_gw_p147_d0_g147_i1?pf_ rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-2&pf_rd_r=1HY9SF4S3JFEA79TK610&pf_rd_t=101&pf _rd_p=467128533&pf_rd_i=468294
    Would anyone be able to tell me if this is likely to be compatible with my 2009 8 core Mac Pro? Or if there is anything I should be looking out for in particular? I know pre-installed hard drives are 3GB/s and the above hard drive is 6GB/s, does this matter?

    Any SATA drive
    About urls:
    http://www.amazon.co.uk/gp/product/B0036Q7MV0/
    is all that is needed.
    For a bit more, WD1502FAEX WD Black 1.5TB
    http://www.wdc.com/en/products/internal/enterprise/

  • Installing windows on dedicated hard drive on Mac pro

    Hi
    I would like to install windows vista ultimate on its own hard drive on a mac pro- but I haven't been able to do it. I tried using boot camp but when it comes time to install windows on a specific partition I receive an error message that it won't install because the drive is not formatted to NTFS. On the other hand there seems to be no way to format to NTFS either through the Mac os or the windows installation dvd prior to this step- catch 22!!
    Any help is welcome.

    Hi danton,
    that's odd since Vista is supporting the GPT partition type.
    If I remeber correctly from another post from you, you have a full Retail version of Vista which includes the 32-bit and the 64-bit version, right ?
    Are you trying to install the 64-bit version when this error occurs ?
    If so, power down your Mac Pro and pull out all drive bays/harddisks leaving only the one harddisk in on which you wanna install Vista.
    Then boot your MP of the Vista DVD and try to install.
    (That's an old trick courtesy of 'the hatter').
    MAybe it helps.
    Stefan

Maybe you are looking for