Align problem on CB745A All- in- one

After replacing the black ink cartridge on my new F4480 all in one printer ,I noticed it print extremely slow and complain about align cartridge every time,i have done alignment several times but the problem persisted can be the problem ?The printer is new  could it be a mechanism problem or is it coming from the new cartridge

I'm really not certain on how to fix this but it may be driver installation issue. You said it was a new printer, have you just upgraded from an older printer? I'd attempt to uninstall your older drivers and reinstall the driver for the new printer. This might be the cause of the alignment pop ups but is unlikely to be the cause of slow printing.
Regards,
Although I am an HP Employee I am not expert on all products.
The views I express here are my own and in no way represent the views, opinions or strategies of HP.
I'm just trying to help out if I can.

Similar Messages

  • Problems Installing J4680C all in one

    I'm having problems installing the all in one for my j4680c. I'm getting a fatal error message. I'm runningWindows 7 64 bit.
    This is the screenshot I took:

    Hi @Mezron,
    I see that you are experiencing issues installing the printer software. You are getting a fatal error message. Thank you for providing the screen shot of the error message. I will certainly do my best to help you.
    Please download and save the latest drivers if you haven't already. HP Officejet Full Feature Software and Driver.
    Turn off the Antivirus Software and the Real Time Scanning if your Antivirus Software has this feature. It can affect the full software from being installed.
    Here is a example using McAffee Security Center.
    Disable Real-Time Scanning and the Firewall:
    Open your McAfee product located down by your clock and right click the M.
    Click Navigation and select Real-Time Scanning .
    Click Turn Off .
    Click Navigation and select Firewall .
    Click Turn Off .
    Return to the main product window and verify that Real-Time Scanning and the Firewall remain off.
    Close your McAfee product. The status should show that you are not protected.
    Then follow this document to register Windows components, msconfig and reinstall the printer software again.
    Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
    If you have any further issues, check this document out for A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
    Please provide in detail the results if you are still having issues.
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Printing/Scanning Problem with HP All-In-One

    As you will see, I am a bit confused as to how my Mac is talking to my HP all in one. I am having printing and scanning problems. When I try to print, nothing happens. I go to print status and the print job is there but the printer is not printing. I try pausing, deleting and trying to print again, hold to no avail. It recognizes the job, it just won't print.
    Scanning is similar. Most of the time I end up with an error message "The scan cannot be performed because another program has control of the HP imaging device". It directs me to restart the program, close all programs, re-boot the computer. I have done all of these and no go. In addition, no other programs are running at the time.
    As far as my computer recognizing the HP, it does in both wifi and bluetooth. I have made it my default printer.
    I have a time capsule as a router and everything is set up properly for it. Four bars are shown indicating it is acting properly. Both it and bluetooth are turned on. The HP status lights are on for both wifi and bluetooth.
    I have checked with HP and Apple Support and could not find anything that addresses my issue. Please help!!
    Thanks

    I had a similar problem awhile back with my HP F2210 all-in-one. I basically re-downloaded all of the software for the printer from HPs site. Before re-installing, I did a safe boot. Then, I reinstalled and restarted and all was well. When software update told me there was a new driver available, I installed it and things still worked. I'm able to print, scan, and all the printer is supposed to do without a hitch.

  • Printing problem with 5610v all-in-one.

    After replaceing a print cartridge the printer started printing with a shadow. That is, the print has a second light image before the main character is printed. I do not know why this is happening and I need to change the charicteristics of the printing back to normal. I have cleaned the new cartridge and I have replaced the cartridge. I have also aligned the cartridge but nothing helps. Suggestions will be greatly appreciated. My all-in-one is a little over two years old and I use Windows Vista Home Premium 64 bits. 

    Try doing this:
    1. Unplug the power cord from the back of the printer and from the wall outlet.
    2. Wait for a minute or two.
    3. Reconnect power cord directly to the wall outlet.
    4. While the printer is still unplug from the back, press and hold the pound (#) and six (6) buttons at the same time.
    5. While holding the pound (#) and three (6) buttons, reconnect the power cord to the back of the printer and then release the buttons.
    6. Turn on the printer if it won't turn on after some time.
    7. Follow the instructions on the LCD.
    8. Try doing a copy in black after the reset is successful.
    Please keep me posted if it works.
    Message Edited by smartfriend on 11-25-2008 06:28 PM
    Please click on KUDOS if you find my solution helpful.

  • Mac OS 10.7 printer problem with 6500 all-in-one wireless

    HP 6500 all-in-one wirelss: After configuring (and reconfiguring) the printer and exhausting all the troubleshooting steps suggested by HP, I still have the problem of prints stalling in the queue or, alternately, printing very very slowly. Wireless connectivity is "excellent" according to the Wireless Network Test Report. When printing, printer is found, display says "Connected to Printer" then the barber-pole spins and spins and eventually the word "Idle" appears. Any suggestions on how to get printer to work?

    This article should help to maintain wireless connection:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en#N101
    Give the steps outlined a try and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • An interesting problem for HP All-in-one machines

    I posted a problem Sunday about my system freezing during boot. It was suggested that my power supply was probably underpowered. See link below for the thread:
    https://forum-en.msi.com/index.php?threadid=43996&sid=
    I bought a new 480W power supply (see specs at bottom) to resolve the problem. After installing it, I was surprised to see it freeze at boot-up again. So, this time I unplugged each USB individually. It turns out the device causing the problem was my new HP all-in-one printer/scanner/copier.
    I checked HP's site to find out that interestingly enough the computer was trying to boot from the digital camera card slots! Anyway, I downloaded the new firmware for my printer and everything is working great now.
    I am glad I replaced my power supply though, now I can overclock without worrying too much. Plus, the PS that came with my case was a piece of junk .

    Yep you Must watch those Do It All USB Devices, And you are 100% Correct Getting rid of the PSU that came with your Case, is the BEST Upgrade that you could have made Period!............Sean REILLY875

  • Windows 8 problems 2575 series all in one

    Recently I bought a new laptop which runs Windows 8(64-bit) and when I tried to install the software required to run my printer (2575 series all in one) I couldn't  because the software wasn't compatible with windows 8.
    Is there any way for me to install a driver, an emulator or some kind of software  that would allow me to accses my printer?
    Edit: sorry, accidentaly double posted somehow.

    The HP 2575 is compatible with Windows 8
    Go to this site, Drivers and Software, Select your OS and download the Full Feature Software and Drivers.
    http://support.hp.com/us-en/product/HP-Photosmart-2570-All-in-One-Printer-series/441247/model/441248...
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • Home hub2 problems conecting scanner(all in one) v...

    Hi is there a known problem with connecting an HP all in one printer scanner via  an RJ45 lead from the home hub. The printer works fine, the scanner only works if the unit is connected via a USB lead. This used to work ok using old Belkin. Have just updated to bt netprotect plus?

    I am visiting with my aunt for a few days who has the printer ( and the Mac) -
    first question she had was: why does this message come up when Mac starts -->
    "HP Photosmart 4280 printer not found in the printer list "
    I clicked on the Edit Printer List button... and it was already there -
    but knowing that things can get corrupted, I deleted the printer from the list
    and told it to add it again -- well, this seemed to work on restart --
    but I believe that message is reappearing now whenever she starts the Mac --
    wonder if there's an elegant solution to this ...
    the 2nd question she had was with printing from the memory card when it is plugged into the printer -- the 4x6 pictures we printed had better color and saturation than when we printed from the Mac -- used the same picture, same paper, everything ... but there was a distinct difference. Anybody else see this yet ?
    Thanks
    Doc Rock

  • Problems with hp1317 all-in-one printer

    I have a Mac OS X snow leopard and an HP 1317 all-in-one printer.  Although it says that the printer is ready it still remains idle and won't print. I've checked everything I can think of: unplugged the printer for a while and made sure I have clicked on Resume  etc.  Please could someone help? Thanks.  I did have suggestions from someone and this helped for a while but now having problems again.

    Thanks for your suggestions.  I've now uninstalled and reinstalled the HP software but am still having the message that there are components missing from the software so I still cannot print my documents.  I'm totally baffled and feel like slinging the computer through the window!!! If you havae any more ideas please feel free to pass them on to me.

  • Installation problems Officejet 5610 All in One on Windows 8.1 64 bit

    I have a HP Officejet 5610 All-in-One printer that I have  had for a few years. It has worked well on the old computer but the computer died. I purchased a new Dell Laptop with the Windows 8.1 64 bit operating system. The printer works fine but the scanner won't work since there is no software in the computer. I went to the HP Support website and tried to down;oad the drivers/software. The download failed 6 times. i finally tried anothe computer and after 4 failures. I was able to down load all 402MB of software. I saved it to a portable USD drive and returned to the Dell. I started the install and got to the begin installation screen. Unfortunately, right after it finished extracting the files. I got a pop up dialog box with the error message "System cannot find file specified". I went to HP Support and the website said to search the Windows file and remane the file extensions on all hpoins*.dat and hpwins*.dat files to .old file extensions. Unfortunately, there aren't any and they don't have any other suggestions.
    Does anyone have any ideas? 

    Hi d-hammer,
    Welcome to the HP forums!
    I'm sorry to hear you've been having issues getting your Officejet 5610  installed on your new Windoes 8.1 computer but I'm hoping I can help you out
    On your new Win 8.1 computer do you have an anti-virus program? Anything like McAffee, Norton, BitDefender, Avast, or anything like that? If you do, it's likely that the firewall within that anti-virus program is blocking part of the install. If you have any anti-virus on your computer you'll need to disable the firewall and the real time scanning within before you try to run the installation again. If you're not sure how, contact the anti-virus company and they should be able to let you know how to do those steps.
    Let me know how that goes for your and we will go from there!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Problem with Microsoft All-in-One Media Keyboard

    Hello,
    I found a problem with this keyboard when I was playing game. If I'm holding Shift + W and then i'm pressing D too (to turn right or rather to walk straight and to the right) it doesn't work. This same is happening if I'm holding Shift + D +
    W. But other combinations are working, like pressing Shift + W + A or Shift + S + D, etc. First I thougt that it is some game issue or program had keyboard shortcut and it's interfering
    with game. But I tried in notepad and it wasn't working too. After all it is not Windows 8.1 issue, because I launched ubuntu live cd and this problem still exist even there.
    Now what can I do with it? Go to warranty shop?

    Hi,
    Did this keyboard hotkeys work previously? Maybe this function only works in specific program or game.
    Keep latest driver and software for the keyboard.
    According to your description, best choice I think is sending the keyboard to the warranty shop.
    Regards
    Yolanda Zhu
    TechNet Community Support

  • Problems with HP All-in-One (4280)

    Okay, I have a new iMac. I connected my HP printer/scanner. The printer works fine but when I try to use the scanner I get an error message saying there is no USB connection.
    I've also tried installing the software and it hangs up at the device setup (final stage) every time.
    Anyone have similar problems? Anyone solve it? Any suggestions otherwise?
    Thanks,
    Todd

    I am visiting with my aunt for a few days who has the printer ( and the Mac) -
    first question she had was: why does this message come up when Mac starts -->
    "HP Photosmart 4280 printer not found in the printer list "
    I clicked on the Edit Printer List button... and it was already there -
    but knowing that things can get corrupted, I deleted the printer from the list
    and told it to add it again -- well, this seemed to work on restart --
    but I believe that message is reappearing now whenever she starts the Mac --
    wonder if there's an elegant solution to this ...
    the 2nd question she had was with printing from the memory card when it is plugged into the printer -- the 4x6 pictures we printed had better color and saturation than when we printed from the Mac -- used the same picture, same paper, everything ... but there was a distinct difference. Anybody else see this yet ?
    Thanks
    Doc Rock

  • HP Desktop All in one F4235 Error, wont print

    Printer Problems HP Desktop All in one  F4235
    I keep getting E & Blinking.
    Cant get Printer to work
    Can someone give me a step by step guide in easy to follow instructions,
    To fix this problem.
    Thankyou for your help.
    <edited to clarify title>
    Message Edited by WendyM on 08-23-2009 09:36 AM

    Hello,
    Please see my response in your other thread:
    http://h30434.www3.hp.com/t5/Printer-All-in-One-In​stall-Setup/hp-deskjet-2540-in-windows-8-not-print​...
    Thanks,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Touchsmart All-In-One 310-1125y not powering up

    Hello:  My HP Touchsmart All-In-One Desktop PC will not power up.  I have bought three different power adapters.  The lights on the AC adapter and the back of the PC have come on with each of the adapters.  The first two were 90W and I realized that I need 120W so the third I purchased is a Lenmar Universal 120 Watt (15V to 24V) power adapter. Once again, the lights come on but when I press the Power Button on my PC, the light on the Power Button flashes Three Times and does nothing else.  Do I have to match Watts, Volts AND Amps or is Watts and Volts sufficient?  
    Please help me! I use this computer for my Karaoke shows and lost a weeks pay this past week because I could not correct this problem.  
    Touchsmart All-In-One 310-1125y
    Windows 7 Operating System
    Thank you for a quick response please?!!

    Hello TCSMFX7:
                 Here is your computers web site page this is where we begin at.   http://h10025.www1.hp.com/ewfrf/wc/product?product=5098882&lc=en&cc=us&dlc=en&lang=en&cc=us
    Now we need to find the beeping codes.   Here we are .    http://h10025.www1.hp.com/ewfrf/wc/searchResults?tmp_product=HP+TouchSmart+310-1125y+Desktop+PC&prod... These are the codes but I wonder if flashing lights are the same because their isn't any thing about flashing light codes. Here is the beeping page    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02222922&lc=en&product=5098882&tmp... This page is for troubling shooting Start up failer.    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01884928&lc=en&product=5098882&tmp...
           Ever thing is pointing to Bios error it is not a simple fast fix. It might require replacing hard drive or doing a factory restore using recovery disc only by changing the boot up from Name of your hard drive to CD/ DV Optical drive. Thats if you can get into Bios section to change the boot up order.  Some computers use tapping f-2 key or Esc key and f-10 key as you start up the computer.  Let's hope it's not in the motherboard.  Tapping f-8 key is your safe mode.
        Lets hope start up trouble shooting page has a fix for it.
    frrw.

  • Wireless connection drops after bout 5 min - HP all in one C6180

    Hi!
    I'm having problem with my all in one product - HP all in one C6180. The wireless network connection drops, and the printer becomes unreachable from both web-interface and printjobs/scanningjobs etc...
    This problem has existed since I bought this machine..
    I've tried several different setups when it comes to WEP/WPA/WPA2 etc..and also different channels on the wireless, but still same problem exist. The printer works perfect for about 5 min, but then drops the connection it seems like. I'm having about 5-6 devices connected to my wireless router (Draytek VGI 2910), and all seems to work perfect together except the C6180.
    At this moment I'm running WPA2 for security on my network. I've tested the software both on Win/ Mac, and currently running the Mac-version.
    Is there any firmware-update out that could solve my problem, or how else should I manage it to work properly?
    Thanks for any help!
    /V

    There does not appear to be any firmware update on this page.  It could be a router issue.
    Let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, set a high IP address, like .250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (ends with .1) for the gateway and first DNS. Leave the second one blank.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for