Align to Artboard: A quick and stoopid question

I've clicked on it. I've set the stage for something interesting to happen. I've looked in manuals; looked online. Swear to god I haveI'll say it right to yer face. But I still I cannot find a one-line answer to the question,
"What does the 'Align to Artboard' button do?"

it aligns the selected object to the artboard. ;)
You probably are not fully engaging it if you do not see anything happening.
First you have to select the align to artboard option, then you have to punch the button. Then, with one or more object selected, if you click on an align option. The object should align itself to the corresponding edge (or center) of the artboard.
I am describing CS3 behavior. I assume CS4 is similar, but do not know. CS2 and earlier behave a bit differently.

Similar Messages

I have what is hopefully a quick and easy question. I kno...

I have what is hopefully a quick and easy question. I know almost nothing about this stuff so go easy on me . All I need to do is find out if my DHCP is enabled. I'm having problems with my Xbox 360 and one of the possible problems is this DHCP thing. However I have no idea how to find the settings for my router on my computer. If it helps I have a Wirless model BEFW11S4. Thanks in advance for any help.

You need to access your router to check if the DHCP is on. To access the router open your browser and type in http://192.168.1.1 into the address field and hit enter. That should open the routers log on screen and by default the user is left blank (some routers it is admin) and the password is abmin. If you changed your routers password as you should for security reasons then use that password. That will bring you to your routers user interface and on the main set up page should be your DHCP.
Richard Aichner (Ikester)

A Quick and EZ question about Symbols

Hi everyone! I have a really quick question:
I'm making a cartoon movie at 30 fps. I've split up my
cartoon character's body parts and I've made them into graphic
symbols. I want the symbols to be as efficient and "right sized" as
possible. So, as far as playback is concerned, what would you
suggest I do:
Make 1 symbol with 5 layers and 50 frames... (to be used by
itself)
OR
Make 5 symbols with 1 layer and 50 frames?? (to be used all
at once)
Hopefully, my question is not too confusing. I'm basically
asking what's better to do: use one large symbol by itself or many
smaller symbols at once.
It's important to me because eventually i could have all 7 of
my cartoon characters on stage at once which would mean using 7
large sized symbols at once or 35 smaller symbols at once
The symbols are all mostly graphic symbols. And, when i'm
done, my library will be containing hundreds of symbols.
Note: I'll be converting the movie to video format so
internet loading time isn't so much my concern as is general
playback and avoiding "slowdown". I want to avoid lag at all costs.
Thank you for the feedback in advance!!! :)
Frank

I really don't understand 100% what you are asking - when you
say "large" what do you mean? file
size or scale? And why would it matter? And what does "at
once" mean? On the timeline at the same
time? If so...why is that an issue?
What do you want to do?
If you are exporting to video then the issue of "slowdown and
lag" is off the table as video is a
fixed-frame rate format.
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
Fr8TrainAnim8tor wrote:
> Hi everyone! I have a really quick question:
>
> I'm making a cartoon movie at 30 fps. I've split up my
cartoon character's
> body parts and I've made them into graphic symbols. I
want the symbols to be as
> efficient and "right sized" as possible. So, as far as
playback is concerned,
> what would you suggest I do:
>
> Make 1 symbol with 5 layers and 50 frames... (to be used
by itself)
> OR
> Make 5 symbols with 1 layer and 50 frames?? (to be used
all at once)
>
> Hopefully, my question is not too confusing. I'm
basically asking what's
> better to do: use one large symbol by itself or many
smaller symbols at once.
>
> It's important to me because eventually i could have all
7 of my cartoon
> characters on stage at once which would mean using 7
large sized symbols at
> once or 35 smaller symbols at once
>
> The symbols are all mostly graphic symbols. And, when
i'm done, my library
> will be containing hundreds of symbols.
>
> Note: I'll be converting the movie to video format so
internet loading time
> isn't so much my concern as is general playback and
avoiding "slowdown". I want
> to avoid lag at all costs.
>
> Thank you for the feedback in advance!!! :)
>
> Frank
>

Quick (and urgent) Question about Intel G5's

Just a quick question about the new intel G5's.
I currently have bunch of software for my PPC G5 which is a Dual 2ghz. Software includes Adobe CS2, Macromedia Studio, Quark 6, etc, etc.
If I purchase the new intel mac, would I be able to use the same software? or would I be forced to purchase a whole new set of everything I currently have?
If the software will work on the intel G5, would it perform at the same rate/better than how it performs now on my PPC g5?
Thanks in advance for any help.

Rosetta:
Most of the time you get a real 'hit' when a program first opens that is PPC. Very sluggish. They will require and use more memory than otherwise, too.
Tests from last August aren't as helpful, there have been improvements, letting the Mac Pro pull even further ahead.
http://www.barefeats.com/quad06.html
Comparison Mac Models shows scores of all models. So there is 2x as much or more processing power, bandwidth, better video, as well as disk drives. A 'base' configuration would be 4-6GB RAM.
And there are differences, more than between G4 and G5.
People with experience would be Mac Pro Discussions
Don't use Migration Assistant, and upgrade to CS3 etc. reinstall all your applications fresh.
There are some drivers and plug-ins, that can be problems, and known.
Mac Pro 2GHz 4GB 10K Raptor RAID Cinema HD Mac OS X (10.4.9) WD RE RAID Aaxeon FW800 PCIe MDD-G4 APC RS1500 Vista

Quick and easy question about creating folder

Total Mac newbie with basic question.
I want to put all my user manuals right on my desktop. All in a folder called user manuals. How would I do this? Smart folder? Just drag 'n drop? how can I quickly find them all?
Thanks in advance!

Hi MarieBoyer
You can easily create a Folder on the desktop, by mouse click + contol to open the contextual menu, where you can choose New Folder, then give it a name.
Or, more easily still just drag one of the existing folders onto the desktop and use it.
As for finding all manual documents, they are just documents in general, and may not even have the word manual in their name, so searching by that criteria will in that case miss them. Otherwise you may have to search by each of their names, which would be rather tedious.
So I suggest, of the manuals that you know of or come across, drag them into your new Folder on the desktop as you find them.
regards roam

Quick and EZ Question

Hello, just a simple question...i want to create a project that is interactive so when a user takes an object that contains a number and drags it over another object that contains another number, i want it to perform a calculation...can i accomplish this with actionscript?
I just want to know if its possible...thank you all

yes.

A quick and easy question about my NEW Ipod Touch.

Okay, I broke down and replaced my old ipod. This new one came with earphones, a cord to connect it to my computer and a little plastic piece that obviously fits on one end of the ipod. Here's my question: WHAT IS IT FOR?
Thanks in advance!
Annie

It's a dock adaptor. There are some devices (eg. speaker systems) which have a slot that fits the 30-pin dock connector for iPods, but the slot is the same size as the iPod Classic, as it is the largest iPod that is compatible with such systems. The dock adaptor that came with your iPod is supposed to fit around the base of your iPod and prevent it from being bent forwards or backwards, as this can damage or even break the dock connector.

Quick and easy question

Hello gang! When I use the brush tool to fill in some pixels a few other pixels nearby or pixels very far away will also get colorized. Why is this happening? It is super annoying as I need to recolor those pixels which I did not want to colorize.
Secondly (and totally unrelated to the first question), when I use the fill tool to replace one body of pixels that are one color into another, it will sometimes fill in what I requested and also an extra layer, making the shape fatter. Not sure I am explaining this very well.
Any help with the above questions would be greatly appreciated!
-Pebble, the Photoshop Noob.

Hi Pebble!
Some examples would help a lot in analyzing your problems.
For the first one, it would be good to know what brush size, softness, etc you use and whether you use precise cursor setting.
Also, what do you mean by "very far away"? 10 pixels? 1000 pixels? Again: brush size? Softness? Airbrush on?

[MSI P67A-GD65]. Quick and dirty question: Is there a Windows 8 option?

Hello everyone,
I have a P67A-GD65(b3), with a Sapphire R9 280x with a GOP Bios. Windows 8.1 are installed in a gpt partition, the Windows Boot Manager is booting the machine. I have the latest beta bios installed (E7681.443).
My question is: Does this bios have the Windows 8 options (like fast/secure boot etc)?
I can't seem to be able to find them anywhere.
Are these options supported with another bios?
The bios is flashed using the forum tool, and all the relevant instructions (remove power, reset etc).
Thanks in advance.

Quote from: fromthewatt on 05-December-13, 01:56:49
hi hpstg, did u run good on windows 7 with latest bios for your mobo and your amd gpu ?
im having issues with my amd 7950 gpu... with latest mobo bios beta.... i get intermitint crashes...
This has nothing to do with the OP's question.
As for his question, I do not see any win 8 features on that board. I may be wrong, but if there were, somewhere in the bios release notes you would see "Win 8 Support"

A quick and simple question about MSI K8N Neo 2 Platinum

I want to overclock my 3500+ but when I go like to 2.4GHZ, the computer isn't stable and sometimes even corrupt some of my Windows files.
My HTT is alright so my mobo stays around 800MHZ
My memory is at 166MHZ so it doesn't go too high
My Vcore is 1.4v but this overclock is so minimal it doesn't cause a problem
Last thing.... AGP and PCI Locks
AGP, no problem, it is locked to 66MHZ, but what about PCI?
I downloaded CoreGen and when I increased the HTT, AGP stood at 66, but PCI increased with it.
Some told me that when you lock AGP to 66, it will also lock PCI, well I have to say that it ain't true 'cause I experienced it myself.
Why isn't PCI Clock not in the motherboard, or is it? and any other motherboard have it???

Never mind, I just noticed I had to put the AGP to 67MHZ to lock both, BUT, I think my comp just sucks in overclocking.....
I set it to 2400MHZ
220x11 with memory at 183MHZ using A64Tweaker so that make my memory set to right on 200MHZ.
My motherboard is set to 880MHZ (800MHZ Origin) so I set HTT to 3 to make 660MHZ and still doesn't work.
When I say it doesn't work it is because my PC doesn't pass Super PI test, it freezes completly after the first LOOP but if I do not run Super PI, the PC won't crash. Is it a Super PI problem or what?

Very quick and simple question about a simple sum going wrong.

Ive noticed that im having lots of ocurrences where my maths goes wrong - usually i trace this to ints multiplying doubles and stuff , or its in degrees not radians .
But this one is too simple to seem to cause problems :
screenY = 180 + ( 420 - (( 420 / 2200 ) * xE ) );
heres the code line which does the calculation, and for a particular loop it
ran as xE = 223 .
xE is an int by the way.
For some reason this code always produces screenY = 600 ,
which should only be the case if xE = 0 .
any suggestions as to how i should help the VM get it right?
thanks in advance guys.

Ive noticed that im having lots of ocurrences where
my maths goes wrong - usually i trace this to ints
multiplying doubles and stuff , or its in degrees
not radians .
But this one is too simple to seem to cause problems
screenY = 180 + ( 420 - (( 420 / 2200 ) * xE ) );
heres the code line which does the calculation, and
for a particular loop it
ran as xE = 223 .
xE is an int by the way.
For some reason this code always produces screenY =
600 ,
which should only be the case if xE = 0 .It happens because in integer division 420/2200 is always equal to zero. So, regardless of the value of xE, you're adding 420 + 180, which is 600.
any suggestions as to how i should help the VM get it right? Yes:
double value = 180.0 + (420.0 - ((420.0/ 2200.0)*xE));
screenY = (int)value;You can simplify all this, of course. Why not do that 420/2200 = 0.19090909... calculation once and just substitute the constant value?
%

A SIMPLE QUICK AND EASY QUESTION TO ANSWER

Why is it that I don't see the object I'm trying to transform move AS I adjust it in real time anymore? What setting did I accidentally press? I've been trying to find out and but I can't.....and I'd just die if I have to put up with not being able to see what I'm moving moves as I modify it.

You have turned off Live Update, a button at the top of the timeline window.

Ok. quick and easy question about my Zen Vision

i'm thinking that my zen can no longer have anything added to it, although there is about 5 gbs worth of space left. it sucks has sucked for a while, but i'm trying to get over it.
my brother noticed that in the bottom of it, the part where it connects so you can make transfers and stuff, is bent. i tried unbending it but that didn't work.
and when i connect it to my comp, it says "overload" and my comp freezes for a bit.
so that's a sign to get another mp3 player right? it's a shame that this happened. he thinks i was too rough with it.
i admit that i have spent some time pushing it in when it wasn't properly fitting. but i didn't "see" it then. now looking back, i kinda laugh.
btw, there are no shops around here to repair the bend to the best of my knowledge..actually, maybe Weiss Hardware...just maybe.

Yes. LOL You word it so much nicer!
lol...
if customer support actually does help, for a nice price, you will be -my new saviour-!
(My music is literally my life.)
OK. I checked there. They have an option of support (while the warranty is still good) and another option (that's non-technical).
I got my first Zen Vision (30 GB) March 2007. Then a replacement (this one) in May 2007. Is it still covered? I have my doubts. :P?

Very quick and easy question

I am making a catalogue, so I need a set of place-holder images which I am able to change he actual image on the following pages after the master one so that I can then move the master image place holders and have all the pages follow accordingly whilst respectivly keeping their different image assigned.
In other words, is there any way I am able to set a 'place-holder' on master page, then assign different images to the following pages, then if I need to move the layout I can just move the place-holders on the master frame whilst keeping their own set images within the place holders.
Thank you very much.

There are a couple of approaches.
Automatic page numbering is accomplished by putting a text frame on the master page and inserting a current page number marker. You can add additional information or text in the frame if you wish, and format to taste. The number will appear on all pages based on that master.
Now for the different approaches. The first way is to just add them independently to each master page. However, if you use masters based on one or more other masters to control things that are basically the same (i.e. you have repeating elements on at least two masters, but something else that's different) you can create a "parent" page and put the numbers on that, then base other master pages on the parent, and everything on the parent will be included in the "child" page. You can Ctrl + Shift Click to select and remove an item if necessary. If you want to edit the repeating elements you do it on the parent page, and the change propagates through to the children.
If you want to have some pages with no numbers you can either make special masters without numbers for them, or just override and delete the number frames on the live pages.
Peter

Quick and easy question (running error)

Whenever I try to run an applet I download the source for, either on this CD I have for my Java book, or from the net, I get:
java.lang.NoSuchMethodError: <whatever the method is>
Exception in thread "main"
And it won't run. Even a simple program like the one at http://www.oreilly.com/catalog/javanut/examples/section4/FirstApplet.java won't work. It compiles just fine though.
Also, I get the same error, seemingly randomly when I try to download any non-applet program and run it, even when I open up a new file and copy paste it the code into it. (which doesn't make sense to me considering I can write programs from scratch and they run just fine!?)

java.lang.NoSuchMethodError: <whatever the method is>
Exception in thread "main" your getting this message, probably because you are trying to the application as a regualr Java application (console or JFrame). Running an Applet is different. there are two way to execute the applet: by an applet embeded in an HTML file, or by using an AppletViewer
use google to find tutorial on how to execute an applet.

Align to Artboard: A quick and stoopid question

Similar Messages

Maybe you are looking for