Align Y-Axis label

Post Author: harish
CA Forum: Xcelsius and Live Office
Hello All,
Is it possible to align the Y-Axis label
Regards
Harish

Post Author: amr_foci
CA Forum: Xcelsius and Live Office
what Exactly you mean align the Y-Axis Labes?
do you mean to move it to the botoom of the chart?
if that,, you can use spaces before or after the Y-Axis title
thats gonna help
Amr

Similar Messages

Can I align the orientation of axis labels in a graph generated with the report generation toolkit (Word)?

I was wondering how to align the axis labels, i.e. 90 degree or such when creating a graph with the report generation toolkit in word.
I can do it after the document is created through Format axis title -> alignment but is there a way out of LabVIEW?
I'd especially like to rotate the y-axis label by 90 degrees.
Thanks a lot,
Juergen

I think he means he can modify it by hand after the report has been generated... But what I want to do is generate the word graph out of labview already with the rotated axis label...
After I posted this I found out that we can do this with a macro and use it from labview, but unfortunately I don't know VB, or VBA...
Like this:

Category Axis Label Alignment

I want to know if we can modify or adjust the alignment of the Category Axis labels (for the x-axis).
My situation is as follows: I have a column chart on which I want my Category axis labels (for each column). I have put them in an angle to help reading them. They are currently "centered" wrt their respective columns. It makes it hard to associate the label to the appropriate column because the end of the label aligns with the center for the next column.
Can I either move the Category Axis Label text box? or change the alignment per se? In Excel for example, the text would be aligned such that the end of the text matches the center of its column.
Thanks

celine_l wrote:
Can I either move the Category Axis Label text box? or change the alignment per se? In Excel for example, the text would be aligned such that the end of the text matches the center of its column.
No. This appears to be a design error in Numbers, and worthy of a Feature Enhancement request.
Go to the Numbers menu, choose Provide numbers Feedback, and request that this behaviour be changes to have the ends of the rotated category labels centered on the column they label. Then cross your fingers and hope for a change in a futre version.
Regards,
Barry

Graph Data does not align with the axis label

Hi,
The graph data does not align with the axis label when
datetimeaxis is used.
http://livedocs.adobe.com/labs/flex3/html/help.html?content=charts_displayingdata_04.html
(in the using parseFunction property example) when you hover on the
line graph the values do not align on the labels. Is this a bug?
Can somebody help me with this.
Thank you,
Gautam.

Hi All
Thanks for looking into it.
Actually we have just added a field GJAHR (was missing in the extractor) so that it takes data accoring to fiscal yr. Actually we had a issue that the Business area for a particular vendor 'X' and doc no 'Y' was showing incorrectly (similar to that of yr 2008) but it changed this yr and the extractor was still picking Business Area for yr 2008.
So we added GJAHR field so that it takes correct Business Area. we have checked in R/3 Extractor checker and it shows correctly.
But that change has not reflected in BW yet even after replicating datasource.
I hope i have made you all understand the situation.
Thanks for your help
Ishi

Default Query Template - Graph axis label alignment

We have BW3.1 and are using a modified Default Query Template. I am trying to set the alignment of the labels on the x-axis to diagonal (bottom-left to top-right) and although the preview shows the correct alignment, when used in conjunction with a query it defaults to vertical.
It works fine if I develop a specific web template for a query, but not for adhoc queries.
Any suggestions?

I'm guessing this happens at 30 degrees as well: Bug 10199188 : CHARTS X AXIS LABEL IS BLURRED AT 45/60 ANGLE
This bug was apparently fixed in the 11.1.1.6.6 Patch Set. Oracle Support does not have a workaround for this either.
Please award points if helpful/correct.

How to display axis labels on both x and y-axis of a column chart

hi,
i have an urgent requirement of having axis labels on both x and y axis
In x-axis i got it by sorting order also but in y-axis i'm unable to do
i need in y-axis ,my column values are L1,L2,L3,----L10these shuold display in y-axis in sorting order and 0 in axis should remain as it is ..........how to take the interval ....? as of now i'm using Auto
my y-axis values shud look like 0,L1,L2,L3,L4,----L10can anyone get perfect solution
thanx in advance
lucky

Hi Lucky,
Per my understanding that you want to display the values(Column1) like "L1,L2,L3....L10" which comes from the "Series group" in the Y-Axis label and keep the row group in "Category group" to
display in the x-axis and Numric column(1,2,3,4) in the "Value", right?
Gernerally the lable display in the y-axis is automatically based on the value of the Numric column in the "Value" and it default is numbric labels.
I have tested on my local environment and in your scenario, i suggest to hide the axis lable of the y-axis and create an tablix to only show the one column contains the values (L1,L2,L3,L3) to display in the place of the hidden y-axis label.
Detais information about to design an new y-axis label ae below for your reference:
Create an tablix to display only the row group of the "Column1" ( for the
Column1 may have duplicate values, you can create parent row group for this column and hide the detail column by setting the "Column Visibility").
Right click the y-axis to select the "Vertical Axis Properties" and select the "Labels" on the left pane to check the "Hide Axis labels"
Select the Chart Area and in the properties set value of left=0 under the CustomPosition:
Set the border style=None for both the Chart and Column1's row group
Drag the tablix at the position near the hidden y-axis and set the size of both the chart and the tablix to make the value in the tablix row group(Column1) to be align with the y-axis label:
Right click the "Chart legend" to delete or hide the legend
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Flex Column Chart X-axis Label position

Hello,
I have a Column Chart and am wanting to align the X-axis labels on top of each Column. Is there a way to achieve this?
Can we change the label's default position? I know there is a "rotation" property which rotates the labels but i want to change the label postion.
Any help/pointers is highly appreciated.
Thanks.

Been diging throught he charts source to figure out if there is a way of doing what I wanted, and appartntly there is (well - for the most part). For anyone else interested there is a property called alignLabelsToInterval for the LinearAxis class. This is not documented but it is a public variable - in the code ( http://opensource.adobe.com/svn/opensource/flex/sdk/trunk/frameworks/projects/charts/src/m x/charts/LinearAxis.as ):
* @private
public function get alignLabelsToInterval():Boolean
return _alignLabelsToInterval;
* @private
public function set alignLabelsToInterval(value:Boolean):void
if (value != _alignLabelsToInterval)
_alignLabelsToInterval = value;
invalidateCache();
dispatchEvent(new Event("mappingChange"));
dispatchEvent(new Event("axisChange"));
Setting this parameter to false allows the base label to stay on the origin of the chart. Then you need to compute a suitable interval for the axis to get the labels you want.
Phew!
Allan

Creating X/Y chart with X-Axis labels in between

Hello all.
I would like to create a Numbers 09 scatter/XY chart with the X-Axis labels between the gridlines instead of on them. How can I do this with a line chart also? Or, does thids format require a Combination chart? If so, how can what I'm trying to create be made?

I'll give you the basic steps. I might miss one or two along the way. The basic steps are to create the chart, remove all the unecessary parts of the chart and set the fill color to none, create & format the table, slide the table under the chart, align the two, then lock them.
Create a chart from your data. I said the chart above was a line chart but it was actually a scatter chart.
I'd recommend making up a few "special" data points (overwriting a few points in your actual data for the time being) that you can use to align the table and chart. In the chart above, I used something like (1.5, 0.1) and (30.5, 0.9), two points that should align exactly with the X & Y gridlines if the chart and table are properly aligned.
Set the min and max for both axes.
Size and place the chart where you want it
Set the fill color to none
Remove the value labels, gridlines, axes, etc.
Create a plain table with the necessary number of columns and rows. The one above has 32 columns and 7 rows.
Put the value labels in the table. I vertically centered the Y axis labels in the cells using the icon on the toolbar. I didn't horizontally center the X axis labels but maybe I should have.
Make the table borders the color & thickness you want. At this point, the X&Y axis labels will also have borders.
Turn on Border Selection in the Table menu
Select the borders you want to remove and change them to no line. You click on a border to select the entire thing then click again to select a segment. You can command-click to select multiple border segments. Be careful you don't miss when clicking or your entire selection will disappear. I recommend selecting & changing a few at a time
Select the table and send it to the back using Arrange/Send to Back.
Slide the table under the chart.
With the entire table selected so that it has the little squares at the corners and sides, drag on the squares to get the table about the right size. Hold down Command when dragging to turn off snaps. Try it without Command and you'll see what I mean.
Use the Table Inspector to fine-tune the row & column sizes so the table "gridlines" match the chart. You are trying to line up the gridlines with your two "special" data points. You might want to adjust the size of the chart some too.
You can move the table around by dragging to get it close to where it should be. You can select the chart and use the arrow keys to move it pixel-by-pixel.
You'll have to repeat the steps above until everything is aligned. Then you can get rid of those "special" data points.
When it all looks good, lock the table and chart so nothing gets changed or moved accidentally.
That was it off the top of my head. It comes out to alot of steps but once you've done stuff like this a few times it gets easy.

How to give individual horizontal axis label to two stacked bar of cartesian chart

I have a cartesian chart showing no. of xyz and no.of abc for a particular period of time. i.e. two bars corresponding to xyz & abc for Jan, and then again two bars corresponding to xyz & abc for Feb, and so on. I have used label function to give label to horizontal axis such that labels look like "xyz abc (nextLine) Jan" ,"xyz abc (nextLine) Feb".
But the issue is that the label is not centre alligned to the respective bars, i.e. xyz is not coming under xyz bar and abc is not coming under abc bar. the whole label's alignment is somewhere in between the two bars on x-axis. And i want to have label centre alligned to their respective bars, i.e 'xyz' should be centre alligned to 'xyz' bar, and 'abc' label should be centre alligned to 'abc' bar, along with the time period value. I have tried giving space in between "xyz" and "abc" but the problem occurs when data varies.They again don't seems centre aligned. I want x-axis label for each bar along with the categoryaxis's category field.
So,is there any way to achieve such functionality??

Could you post a screenshot of your current output and maybe a mockup of the desired output?

Setting the title font and axis labels in a graph created with the Report Generation Toolkit

I'm using the LabVIEW Report Generation Toolkit for Microsoft Office to generate Excel worksheets containing plots. Unfortunately, the default font size used in the plots is huge (see attached worksheet). I was able to use Excel Set Graph Font.vi to reduce the size of the axis labels, but there does not appear to be a function to do this to the title and legend. In addition, there does not appear to be a function to set the axis text labels. Before I write my own, has NI released additional functions to perform these tasks?
Thanks for your help,
Zach Lerner
Software Engineer
OnWafer Technologies, Inc.
Attachments:
Test1_-_embedded_graph's_title_and_legend_font_is_huge.xls ‏14 KB

Hello Zeidan
The graph title and legend font sizes can be changed by accessing a low level VI (Excel_Insert_Chart.vi) that is part of the excelsub.llb that is located at (C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\addons\_office). This VI is called dynamically from within the Excel Insert Graph.vi and it uses VI server technology to access the Excel exposed properties. Attached to this post is an image of the block diagram of this VI after I have modified it to set the font sizes of the title and legend to 15. The circles in the image represent what I had to add to accomplish this.
Best Regards,
Ayman Kabire
Attachments:
Excel_Insert_Chart.JPG ‏99 KB

Does not display axis label in graph when exported to excel

I have a wierd issue.I have a report with graph with coloum chart and axis labels description on x axis.WHen i export the report to PDF everything looks OK.But when i export it to excel few axis labels disapper.Out of 12 labels only 2 apper when exported to excel.Has anyone encountered this issue.
If so is there a way to fix this.
PS: I am using BO XI 3.1 Webi.
Thank you,
Sanjeev

hi,
I have tried this out with a sample.
In WEBI preview mode and PDF, all axis labels will appear fine.
But when exported to excel, some labels will disappear.
Workaround: We have to increase the chart size in Excel till all axis labels appear clearly.
Regards,
Vamsee

Showing one data point on a line chart - X-axis label placed away from its actual position

Hi Guys,
     In line chart, i used CircleItemRenderer to show single data point. It shows correctly if it is single data point. But the x-axis label placed away from its actual position. Right now it displayed left most position where the line chart starts. I need to move that label straight of that datapoint where it plotted. Please see the screen shot attached with this post.
In screen shot, x-axis label "Jan" displayed in left most position.
     And how can we show the datatip for single datapoint. At present, we can't able to see the datatips also with single datapoint.
     Can any body help me to fix those two issues.

I figured out a way to customize a single datapoint in a line series. The solution is at this link:
http://www.flexdeveloper.eu/forums/flex-charting/customize-a-datapoint-in-a-line-series/

Stacked bar chart with custom x axis labels

Is there a way to build this simple chart in labview that I did in Excel? I need to have many x axis labels and there could be from 5 to 100 of them depending on the data set.
Attachments:
Excel.JPG ‏33 KB

Hi id,
Thank you for your response. I hope you are doing well.
There is an example in the LabVIEW Example Finder (Help>>Find Examples..). It is titled, Stacked Bar Graph. You can search for it if you switch tabs in the Example Finder window. This should help you create a stacked bar graph. To help you with your veritcal axis labels, here is a knowledge base link that details the process:
How Can I Customize the X-Axis Labels On My LabVIEW Graph/Chart So They Appear Vertically?
http://digital.ni.com/public.nsf/allkb/1F7C1B089E45908E86256C8C0051894A?OpenDocument
Let me know if these examples help.
Best regards,
Anna L
Applications Engineer
National Instruments

Display Column Chart Y Axis Labels in Kilo(K), Million(M)...

Hi Folks,
I would like to display the Y-axis labels of a column chart in Kilo, Millions etc. I used the below mentioned formula in excel for that set of data. Here is the formula [>=1000000]0,,"M";[>=1000]0,"K";0
Though in embedded excel it displays the values as desired, when I assign them to the column chart in Xcelsius the Y axis labels are not as expected. For Kilo it works fine but when it comes to millions it is not displaying accordingly. Any help is appreciated.
Thanks,
Sukumar

Hi Sukumar,
If You want to display the Y Axis Labels like Kilo(k),Million(M),Billions(B)...etc.Do the following things ,
goto column chart properties->behaviour->scale in that Enable the Fixed Label size checkbox.
Regards,
Ramana

How to avoid repeatition of axis labels in Graphs in WebI 4.0??

Hello All,
I am working with graphs in WebI 4.0. In category axis, the labels are being repeated thrice ,twice and so on based on the filter which I have placed according to my requirement.. I need them to be displayed only once. I have used axis label delete factor from Format chart. But then it solved only partial problem. Appreciate your help.
Regards,
Anila.

plz
try this
create a one more vertical table
and check that location-text and location-key are some .
we think it would be like this
location-text     location-key
can                          01
cbg                          02
det                           03
txc                           04
txc                           05
bec of different key and some description the axis is getting repeating.

Align Y-Axis label

Similar Messages

Maybe you are looking for